Re: Error when trying to build llvm
Hello, After several attempts of passing that command in the wrong build directory, I finally was able to find the right build directory, and here's what I found in ida.log: https://pastebin.com/hPMmFCyj I really can't make out what's going on or what to do next. Please help On Fri, Jul 30, 2021 at 8:57 PM Joel Sherrill wrote: > On Fri, Jul 30, 2021 at 1:32 PM Ida Delphine wrote: > > > > Just installed swig and now met with another error. Can't find what is > really wrong. > > RTEMS Source Builder - Set Builder, 6 (c938bd7cbe16) > > Build Set: 6/rtems-llvm > > Build Set: devel/swig.bset > > Build Set: devel/autotools-internal.bset > > config: devel/autoconf-2.69-1.cfg > > package: autoconf-2.69-x86_64-linux-gnu-1 > > building: autoconf-2.69-x86_64-linux-gnu-1 > > sizes: autoconf-2.69-x86_64-linux-gnu-1: 7.493MB (installed: 0.000B) > > cleaning: autoconf-2.69-x86_64-linux-gnu-1 > > config: devel/automake-1.12.6-1.cfg > > package: automake-1.12.6-x86_64-linux-gnu-1 > > building: automake-1.12.6-x86_64-linux-gnu-1 > > sizes: automake-1.12.6-x86_64-linux-gnu-1: 8.085MB (installed: 0.000B) > > cleaning: automake-1.12.6-x86_64-linux-gnu-1 > > config: devel/libtool-2.4.2-1.cfg > > package: libtool-2.4.2-x86_64-linux-gnu-1 > > building: libtool-2.4.2-x86_64-linux-gnu-1 > > sizes: libtool-2.4.2-x86_64-linux-gnu-1: 12.775MB (installed: 0.000B) > > cleaning: libtool-2.4.2-x86_64-linux-gnu-1 > > cleaning: autoconf-2.69-x86_64-linux-gnu-1 > > cleaning: automake-1.12.6-x86_64-linux-gnu-1 > > cleaning: libtool-2.4.2-x86_64-linux-gnu-1 > > Build Sizes: usage: 12.775MB total: 79.327MB (sources: 79.308MB, > patches: 19.412KB, installed 0.000B) > > Build Set: Time 0:00:17.154758 > > config: devel/swig-4.0.1.cfg > > package: swig-4.0.1-x86_64-linux-gnu-1 > > building: swig-4.0.1-x86_64-linux-gnu-1 > > sizes: swig-4.0.1-x86_64-linux-gnu-1: 106.899MB (installed: 0.000B) > > cleaning: swig-4.0.1-x86_64-linux-gnu-1 > > cleaning: swig-4.0.1-x86_64-linux-gnu-1 > > Build Set: Time 0:01:27.065144 > > config: tools/rtems-llvm-8.0.1.cfg > > package: rtems-llvm-8.0.1-x86_64-linux-gnu-1 > > building: rtems-llvm-8.0.1-x86_64-linux-gnu-1 > > error: building rtems-llvm-8.0.1-x86_64-linux-gnu-1 > > Build FAILED > > See error report: rsb-report-rtems-llvm-8.0.1-x86_64-linux-gnu-1.txt > > error: building rtems-llvm-8.0.1-x86_64-linux-gnu-1 > > Build Set: Time 0:04:53.632167 > > Build FAILED > > The error report: https://pastebin.com/nFYzqWqY > > I don't see any compiler errors. I see warnings and if they built with > -Werror, > then it would fail. > > I think there is a way to force a cmake build to show the command invoked. > This > has lots of details: > > > https://stackoverflow.com/questions/2670121/using-cmake-with-gnu-make-how-can-i-see-the-exact-commands > > I think you can manually go down into the build directory which is left > after the build failure, and type "make VERBOSE=1" >ida.log 2>&1" > > Then the file ida.log should show all the commands. > > The URL above shows how to do it via cmake. But in this case, I think > going into the RSB build/ directory and doing the make by hand will > give us the next bit of into -- does it compile with -Werror. > > > > > On Fri, Jul 30, 2021 at 2:24 PM Joel Sherrill wrote: > >> > >> On Fri, Jul 30, 2021 at 12:46 AM Ida Delphine > wrote: > >> > > >> > Hello everyone, > >> > I have been trying to build llvm using the command > >> > ../source-builder/sb-set-builder --prefix=$HOME/development/rtems/6 > 6/rtems-llvm > >> > Here's the error report > >> > https://pastebin.com/vAXgwXMW > >> > >> It would have been helpful to have put the error lines in the email > >> and a link to the full log. > >> > >> -- Could NOT find libedit (missing: libedit_INCLUDE_DIRS > libedit_LIBRARIES) > >> -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) > >> CMake Error at > /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:146 > >> (message): > >> Could NOT find SWIG (missing: SWIG_EXECUTABLE SWIG_DIR) > >> Call Stack (most recent call first): > >> /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:393 > >> (_FPHSA_FAILURE_MESSAGE) > >> /usr/share/cmake-3.16/Modules/FindSWIG.cmake:64 > >> (FIND_PACKAGE_HANDLE_STANDARD_ARGS) > >> tools/lldb/scripts/CMakeLists.txt:18 (find_package) > >> > >> > Please what am I missing? > >> > >> Based on google results and other people having the same issue, you may > not > >> have swig installed. It is something to install with npm from what I > >> see. Other people > >> have it but need to set some variables to let cmake know where it is. > >> > >> Hopefully installing it will help. Chris should comment on this from > >> an RSB perspective. > >> > >> --joel > >> > >> > > >> > ___ > >> > devel mailing list > >> > devel@rtems.org > >> > http://lists.rtems.org/mailman/listinfo/devel > ___ devel mailing list devel@rtems.org
Re: Error when trying to build llvm
On Fri, Jul 30, 2021 at 1:32 PM Ida Delphine wrote: > > Just installed swig and now met with another error. Can't find what is really > wrong. > RTEMS Source Builder - Set Builder, 6 (c938bd7cbe16) > Build Set: 6/rtems-llvm > Build Set: devel/swig.bset > Build Set: devel/autotools-internal.bset > config: devel/autoconf-2.69-1.cfg > package: autoconf-2.69-x86_64-linux-gnu-1 > building: autoconf-2.69-x86_64-linux-gnu-1 > sizes: autoconf-2.69-x86_64-linux-gnu-1: 7.493MB (installed: 0.000B) > cleaning: autoconf-2.69-x86_64-linux-gnu-1 > config: devel/automake-1.12.6-1.cfg > package: automake-1.12.6-x86_64-linux-gnu-1 > building: automake-1.12.6-x86_64-linux-gnu-1 > sizes: automake-1.12.6-x86_64-linux-gnu-1: 8.085MB (installed: 0.000B) > cleaning: automake-1.12.6-x86_64-linux-gnu-1 > config: devel/libtool-2.4.2-1.cfg > package: libtool-2.4.2-x86_64-linux-gnu-1 > building: libtool-2.4.2-x86_64-linux-gnu-1 > sizes: libtool-2.4.2-x86_64-linux-gnu-1: 12.775MB (installed: 0.000B) > cleaning: libtool-2.4.2-x86_64-linux-gnu-1 > cleaning: autoconf-2.69-x86_64-linux-gnu-1 > cleaning: automake-1.12.6-x86_64-linux-gnu-1 > cleaning: libtool-2.4.2-x86_64-linux-gnu-1 > Build Sizes: usage: 12.775MB total: 79.327MB (sources: 79.308MB, patches: > 19.412KB, installed 0.000B) > Build Set: Time 0:00:17.154758 > config: devel/swig-4.0.1.cfg > package: swig-4.0.1-x86_64-linux-gnu-1 > building: swig-4.0.1-x86_64-linux-gnu-1 > sizes: swig-4.0.1-x86_64-linux-gnu-1: 106.899MB (installed: 0.000B) > cleaning: swig-4.0.1-x86_64-linux-gnu-1 > cleaning: swig-4.0.1-x86_64-linux-gnu-1 > Build Set: Time 0:01:27.065144 > config: tools/rtems-llvm-8.0.1.cfg > package: rtems-llvm-8.0.1-x86_64-linux-gnu-1 > building: rtems-llvm-8.0.1-x86_64-linux-gnu-1 > error: building rtems-llvm-8.0.1-x86_64-linux-gnu-1 > Build FAILED > See error report: rsb-report-rtems-llvm-8.0.1-x86_64-linux-gnu-1.txt > error: building rtems-llvm-8.0.1-x86_64-linux-gnu-1 > Build Set: Time 0:04:53.632167 > Build FAILED > The error report: https://pastebin.com/nFYzqWqY I don't see any compiler errors. I see warnings and if they built with -Werror, then it would fail. I think there is a way to force a cmake build to show the command invoked. This has lots of details: https://stackoverflow.com/questions/2670121/using-cmake-with-gnu-make-how-can-i-see-the-exact-commands I think you can manually go down into the build directory which is left after the build failure, and type "make VERBOSE=1" >ida.log 2>&1" Then the file ida.log should show all the commands. The URL above shows how to do it via cmake. But in this case, I think going into the RSB build/ directory and doing the make by hand will give us the next bit of into -- does it compile with -Werror. > > On Fri, Jul 30, 2021 at 2:24 PM Joel Sherrill wrote: >> >> On Fri, Jul 30, 2021 at 12:46 AM Ida Delphine wrote: >> > >> > Hello everyone, >> > I have been trying to build llvm using the command >> > ../source-builder/sb-set-builder --prefix=$HOME/development/rtems/6 >> > 6/rtems-llvm >> > Here's the error report >> > https://pastebin.com/vAXgwXMW >> >> It would have been helpful to have put the error lines in the email >> and a link to the full log. >> >> -- Could NOT find libedit (missing: libedit_INCLUDE_DIRS libedit_LIBRARIES) >> -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) >> CMake Error at >> /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:146 >> (message): >> Could NOT find SWIG (missing: SWIG_EXECUTABLE SWIG_DIR) >> Call Stack (most recent call first): >> /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:393 >> (_FPHSA_FAILURE_MESSAGE) >> /usr/share/cmake-3.16/Modules/FindSWIG.cmake:64 >> (FIND_PACKAGE_HANDLE_STANDARD_ARGS) >> tools/lldb/scripts/CMakeLists.txt:18 (find_package) >> >> > Please what am I missing? >> >> Based on google results and other people having the same issue, you may not >> have swig installed. It is something to install with npm from what I >> see. Other people >> have it but need to set some variables to let cmake know where it is. >> >> Hopefully installing it will help. Chris should comment on this from >> an RSB perspective. >> >> --joel >> >> > >> > ___ >> > devel mailing list >> > devel@rtems.org >> > http://lists.rtems.org/mailman/listinfo/devel ___ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
Re: Error when trying to build llvm
Just installed swig and now met with another error. Can't find what is really wrong. RTEMS Source Builder - Set Builder, 6 (c938bd7cbe16) Build Set: 6/rtems-llvm Build Set: devel/swig.bset Build Set: devel/autotools-internal.bset config: devel/autoconf-2.69-1.cfg package: autoconf-2.69-x86_64-linux-gnu-1 building: autoconf-2.69-x86_64-linux-gnu-1 sizes: autoconf-2.69-x86_64-linux-gnu-1: 7.493MB (installed: 0.000B) cleaning: autoconf-2.69-x86_64-linux-gnu-1 config: devel/automake-1.12.6-1.cfg package: automake-1.12.6-x86_64-linux-gnu-1 building: automake-1.12.6-x86_64-linux-gnu-1 sizes: automake-1.12.6-x86_64-linux-gnu-1: 8.085MB (installed: 0.000B) cleaning: automake-1.12.6-x86_64-linux-gnu-1 config: devel/libtool-2.4.2-1.cfg package: libtool-2.4.2-x86_64-linux-gnu-1 building: libtool-2.4.2-x86_64-linux-gnu-1 sizes: libtool-2.4.2-x86_64-linux-gnu-1: 12.775MB (installed: 0.000B) cleaning: libtool-2.4.2-x86_64-linux-gnu-1 cleaning: autoconf-2.69-x86_64-linux-gnu-1 cleaning: automake-1.12.6-x86_64-linux-gnu-1 cleaning: libtool-2.4.2-x86_64-linux-gnu-1 Build Sizes: usage: 12.775MB total: 79.327MB (sources: 79.308MB, patches: 19.412KB, installed 0.000B) Build Set: Time 0:00:17.154758 config: devel/swig-4.0.1.cfg package: swig-4.0.1-x86_64-linux-gnu-1 building: swig-4.0.1-x86_64-linux-gnu-1 sizes: swig-4.0.1-x86_64-linux-gnu-1: 106.899MB (installed: 0.000B) cleaning: swig-4.0.1-x86_64-linux-gnu-1 cleaning: swig-4.0.1-x86_64-linux-gnu-1 Build Set: Time 0:01:27.065144 config: tools/rtems-llvm-8.0.1.cfg package: rtems-llvm-8.0.1-x86_64-linux-gnu-1 building: rtems-llvm-8.0.1-x86_64-linux-gnu-1 error: building rtems-llvm-8.0.1-x86_64-linux-gnu-1 Build FAILED See error report: rsb-report-rtems-llvm-8.0.1-x86_64-linux-gnu-1.txt error: building rtems-llvm-8.0.1-x86_64-linux-gnu-1 Build Set: Time 0:04:53.632167 Build FAILED The error report: https://pastebin.com/nFYzqWqY On Fri, Jul 30, 2021 at 2:24 PM Joel Sherrill wrote: > On Fri, Jul 30, 2021 at 12:46 AM Ida Delphine wrote: > > > > Hello everyone, > > I have been trying to build llvm using the command > > ../source-builder/sb-set-builder --prefix=$HOME/development/rtems/6 > 6/rtems-llvm > > Here's the error report > > https://pastebin.com/vAXgwXMW > > It would have been helpful to have put the error lines in the email > and a link to the full log. > > -- Could NOT find libedit (missing: libedit_INCLUDE_DIRS libedit_LIBRARIES) > -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) > CMake Error at > /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:146 > (message): > Could NOT find SWIG (missing: SWIG_EXECUTABLE SWIG_DIR) > Call Stack (most recent call first): > /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:393 > (_FPHSA_FAILURE_MESSAGE) > /usr/share/cmake-3.16/Modules/FindSWIG.cmake:64 > (FIND_PACKAGE_HANDLE_STANDARD_ARGS) > tools/lldb/scripts/CMakeLists.txt:18 (find_package) > > > Please what am I missing? > > Based on google results and other people having the same issue, you may not > have swig installed. It is something to install with npm from what I > see. Other people > have it but need to set some variables to let cmake know where it is. > > Hopefully installing it will help. Chris should comment on this from > an RSB perspective. > > --joel > > > > > ___ > > devel mailing list > > devel@rtems.org > > http://lists.rtems.org/mailman/listinfo/devel > ___ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
Re: Error when trying to build llvm
On Fri, Jul 30, 2021 at 12:46 AM Ida Delphine wrote: > > Hello everyone, > I have been trying to build llvm using the command > ../source-builder/sb-set-builder --prefix=$HOME/development/rtems/6 > 6/rtems-llvm > Here's the error report > https://pastebin.com/vAXgwXMW It would have been helpful to have put the error lines in the email and a link to the full log. -- Could NOT find libedit (missing: libedit_INCLUDE_DIRS libedit_LIBRARIES) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) CMake Error at /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:146 (message): Could NOT find SWIG (missing: SWIG_EXECUTABLE SWIG_DIR) Call Stack (most recent call first): /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:393 (_FPHSA_FAILURE_MESSAGE) /usr/share/cmake-3.16/Modules/FindSWIG.cmake:64 (FIND_PACKAGE_HANDLE_STANDARD_ARGS) tools/lldb/scripts/CMakeLists.txt:18 (find_package) > Please what am I missing? Based on google results and other people having the same issue, you may not have swig installed. It is something to install with npm from what I see. Other people have it but need to set some variables to let cmake know where it is. Hopefully installing it will help. Chris should comment on this from an RSB perspective. --joel > > ___ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel ___ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
Error when trying to build llvm
Hello everyone, I have been trying to build llvm using the command ../source-builder/sb-set-builder --prefix=$HOME/development/rtems/6 6/rtems-llvm Here's the error report https://pastebin.com/vAXgwXMW Please what am I missing? ___ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
