date:20040414

Re: i810 driver 1400x1050 problem -- bios replacement

2004-04-14 Thread Alessandro Temil

S Streif wrote:

I tried it on my Acer TM661LCI, without success. XWindow starts without any
error message and I can see the trash bin icon.
However, the trash icon is very big and the screen is flickering and is
fuzzy.
I tried with different resolutions -- no difference.
It might be necessary to modify the video bios with the vbios tool. Because it
is written in the driver's info file
( ftp://download.intel.com/design/intarch/SWSUP/IEGDLinux.htm ):
Please be sure to download the Video BIOS as well.

Any ideas?

Bye,
Stefan
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
I tried those drivers on my Acer TM661Lci but it was a no-go.
I patched kernel 2.4.24 sources with those provided by Intel, and 
followed all the instructions on the RELNOTES file.
I also set the PrimaryPort option on LVDS as read on this thread but 
all i got was dark screen.
PrimaryPort option seems to have some effect as it causes the screen 
to blink before turning black again.

Anyone succeded with this driver?

Regards,
Alessandro Temil
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel

Re: i810 driver 1400x1050 problem -- bios replacement

2004-04-14 Thread Jakub Troszok

Alessandro Temil wrote:
I tried those drivers on my Acer TM661Lci but it was a no-go.
I patched kernel 2.4.24 sources with those provided by Intel, and 
followed all the instructions on the RELNOTES file.
I also set the PrimaryPort option on LVDS as read on this thread but 
all i got was dark screen.
PrimaryPort option seems to have some effect as it causes the screen 
to blink before turning black again.
Anyone succeded with this driver?
I did not (I have dell inspiron 510m),
Some green/violet pattern appears on the screen for 1 or 2 seconds
and then everything goes blank.
--
Jakub Troszok [EMAIL PROTECTED]
http://www.nomachine.com
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel

Re: i810 driver 1400x1050 problem -- bios replacement

2004-04-14 Thread S Streif

Hi,

  Anyone succeded with this driver?
 I did not (I have dell inspiron 510m),

Nor did I.

I installed the corresponding Windows driver (IEGDWin.zip) and even this driver
wasn't working (blank screen).

This result could lead to the conclusions that both drivers are still under
development and/or that it is necessary to make use of the VBIOS program
(IEGDVBIOS.zip). Maybe this is required in order to modify the video bios or to
prepare the video bios for the driver (under both operation systems, windows
and Linux).

I haven't figured out yet whether it is required or not, because I don't
understand everything that is written in the manual. Anyone wants to have a
look at the manual? (For a link see earlier in this thread)

See you,
Stefan

___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel

Re: i810 driver 1400x1050 problem -- bios replacement

2004-04-14 Thread Alessandro Temil

Btw, i post the XFree86.0.log i got using the driver.
It looks like everything is working, i don't see any fatal error 
message, but as i stated before the screen remains blank.

Regards,

Alessandro Temil

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20 i686 [ELF] 
Build Date: 01 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: /var/log/XFree86.0.log, Time: Wed Apr 14 15:55:42 2004
(==) Using config file: /etc/X11/XF86Config
(==) ServerLayout XFree86 Configured
(**) |--Screen Screen0 (0)
(**) |   |--Monitor Monitor0
(**) |   |--Device Card0
(**) |--Input Device Mouse0
(**) |--Input Device Keyboard0
(==) Keyboard: CustomKeycode disabled
(**) |--Input Device UsbMouse
(**) FontPath set to 
/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/
(**) RgbPath set to /usr/X11R6/lib/X11/rgb
(**) ModulePath set to /usr/X11R6/lib/modules
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: bitmap
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=The XFree86 Project
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: pcidata
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor=The XFree86 Project
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3580 card 1025,0035 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 8086,3584 card 1025,0035 rev 02 class 08,80,00 hdr 00
(II) PCI: 00:00:3: chip 8086,3585 card 1025,0035 rev 02 class 08,80,00 hdr 80
(II) PCI: 00:02:0: chip 8086,3582 card 1025,0035 rev 02 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,3582 card 1025,0035 rev 02 class 03,80,00 hdr 80
(II) PCI: 00:1d:0: chip 8086,24c2 card 1025,0035 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1025,0035 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1025,0035 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1025,0035 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card , rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card , rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1025,0035 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1025,0035 rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1025,0035 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1025,0035 rev 03 class 07,03,00 hdr 00
(II) PCI: 02:02:0: chip 14e4,4401 card 1025,0035 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 8086,1043 card 8086,2527 rev 04 class 02,80,00 hdr 00
(II) PCI: 02:06:0: chip 1217,7113 card 3401, rev 20 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1217,7113 card 3c01, rev 20 class 06,07,00 hdr 82
(II) PCI: 02:07:0: chip 104c,8026 card 1025,0035 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1  0   0x - 0x (0x1) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1  0   0x - 0x (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1  0   0x - 0x (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1  0   0x3000 - 0x30ff (0x100) IX[B]
[1] -1  0   0x3400 - 0x34ff (0x100) IX[B]
[2] -1  0   0x3800 - 0x38ff (0x100) IX[B]
[3] -1  0   0x3c00 - 0x3cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1  0   0xe020 - 0xe07f (0x60) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II)

Re: Intel 82852 Xv

2004-04-14 Thread Mark Cuss

 How does commenting out the 1 ||  part affect this problem?

Just removing the 1 || as you suggested has the same result as removing
the whole block as I did - the video overlays still function correctly.

Thanks!

Mark


 Marc.

 +--+---+
 |  Marc Aurele La France   |  work:   1-780-492-9310   |
 |  Computing and Network Services  |  fax:1-780-492-1729   |
 |  352 General Services Building   |  email:  [EMAIL PROTECTED]  |
 |  University of Alberta   +---+
 |  Edmonton, Alberta   |   |
 |  T6G 2H1 | Standard disclaimers apply|
 |  CANADA  |   |
 +--+---+
 XFree86 developer and VP.  ATI driver and X server internals.

 ___
 Devel mailing list
 [EMAIL PROTECTED]
 http://XFree86.Org/mailman/listinfo/devel



___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel

XFree86 Bugzilla ...

2004-04-14 Thread Tristan Van Berkom

Hi team,
I'm not so sure about the proper patching etiquette so I'll ask here,
I seem to have rights to do whatever I want with a bug, so I filed the bug,
I fixed the bug (not in bugzilla), attatched a proposed patch, assigned
the bug to myself; but I dont think I should be able to mark it fixed
if its not in cvs HEAD, correct ?
Here is the bug info:
http://bugs.xfree86.org/show_bug.cgi?id=1332
One more thing, Is it desireable that this version of driver be
compileable for X 3.3.x series ?
If so, my patch is broken as it makes use of the posix_tty functions
provided only in 4.x versions (could easily fix that... #ifdef... ).
Maybe there is a document on this stuff someone could point
me towards ?
Cheers,
 -Tristan
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel

Re: i810 driver 1400x1050 problem -- bios replacement

Re: i810 driver 1400x1050 problem -- bios replacement

Re: i810 driver 1400x1050 problem -- bios replacement

Re: i810 driver 1400x1050 problem -- bios replacement

Re: Intel 82852 Xv

XFree86 Bugzilla ...

6 matches

Site Navigation

Mail list logo

Footer information