Re: [PATCH linux-next 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver

2015-12-11 Thread Nicolas Ferre 
Le 07/12/2015 15:09, Cyrille Pitchen a écrit :
> This patch documents the DT bindings for the driver of the Atmel QSPI
> controller embedded inside sama5d2x SoCs.
> 
> Signed-off-by: Cyrille Pitchen 

The change is very small from previous one and moreover accepted by Rob.
So, for sure:

Acked-by: Nicolas Ferre 


> ---
>  .../devicetree/bindings/mtd/atmel-quadspi.txt  | 32 
> ++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt 
> b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> new file mode 100644
> index ..e81f20f9faf1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> @@ -0,0 +1,32 @@
> +* Atmel Quad Serial Peripheral Interface (QSPI)
> +
> +Required properties:
> +- compatible: Should be "atmel,sama5d2-qspi".
> +- reg:Should contain the locations and lengths of the base 
> registers
> +  and the mapped memory.
> +- reg-names:  Should contain the resource reg names:
> +  - qspi_base: configuration register address space
> +  - qspi_mmap: memory mapped address space
> +- interrupts: Should contain the interrupt for the device.
> +- clocks: The phandle of the clock needed by the QSPI controller.
> +- #address-cells: Should be <1>.
> +- #size-cells:Should be <0>.
> +
> +Example:
> +
> +spi@f002 {
> + compatible = "atmel,sama5d2-qspi";
> + reg = <0xf002 0x100>, <0xd000 0x800>;
> + reg-names = "qpsi_base", "qspi_mmap";
> + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&spi0_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi0_default>;
> + status = "okay";
> +
> + m25p80@0 {
> + ...
> + };
> +};
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH linux-next 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver

2015-12-08 Thread Rob Herring 
On Mon, Dec 07, 2015 at 03:09:13PM +0100, Cyrille Pitchen wrote:
> This patch documents the DT bindings for the driver of the Atmel QSPI
> controller embedded inside sama5d2x SoCs.
> 
> Signed-off-by: Cyrille Pitchen 

Acked-by: Rob Herring 

> ---
>  .../devicetree/bindings/mtd/atmel-quadspi.txt  | 32 
> ++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt 
> b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> new file mode 100644
> index ..e81f20f9faf1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> @@ -0,0 +1,32 @@
> +* Atmel Quad Serial Peripheral Interface (QSPI)
> +
> +Required properties:
> +- compatible: Should be "atmel,sama5d2-qspi".
> +- reg:Should contain the locations and lengths of the base 
> registers
> +  and the mapped memory.
> +- reg-names:  Should contain the resource reg names:
> +  - qspi_base: configuration register address space
> +  - qspi_mmap: memory mapped address space
> +- interrupts: Should contain the interrupt for the device.
> +- clocks: The phandle of the clock needed by the QSPI controller.
> +- #address-cells: Should be <1>.
> +- #size-cells:Should be <0>.
> +
> +Example:
> +
> +spi@f002 {
> + compatible = "atmel,sama5d2-qspi";
> + reg = <0xf002 0x100>, <0xd000 0x800>;
> + reg-names = "qpsi_base", "qspi_mmap";
> + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&spi0_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi0_default>;
> + status = "okay";
> +
> + m25p80@0 {
> + ...
> + };
> +};
> -- 
> 1.8.2.2
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH linux-next 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver

2015-12-07 Thread Cyrille Pitchen 
This patch documents the DT bindings for the driver of the Atmel QSPI
controller embedded inside sama5d2x SoCs.

Signed-off-by: Cyrille Pitchen 
---
 .../devicetree/bindings/mtd/atmel-quadspi.txt  | 32 ++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt

diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt 
b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
new file mode 100644
index ..e81f20f9faf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
@@ -0,0 +1,32 @@
+* Atmel Quad Serial Peripheral Interface (QSPI)
+
+Required properties:
+- compatible: Should be "atmel,sama5d2-qspi".
+- reg:Should contain the locations and lengths of the base 
registers
+  and the mapped memory.
+- reg-names:  Should contain the resource reg names:
+  - qspi_base: configuration register address space
+  - qspi_mmap: memory mapped address space
+- interrupts: Should contain the interrupt for the device.
+- clocks: The phandle of the clock needed by the QSPI controller.
+- #address-cells: Should be <1>.
+- #size-cells:Should be <0>.
+
+Example:
+
+spi@f002 {
+   compatible = "atmel,sama5d2-qspi";
+   reg = <0xf002 0x100>, <0xd000 0x800>;
+   reg-names = "qpsi_base", "qspi_mmap";
+   interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+   clocks = <&spi0_clk>;
+   #address-cells = <1>;
+   #size-cells = <0>;
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_spi0_default>;
+   status = "okay";
+
+   m25p80@0 {
+   ...
+   };
+};
-- 
1.8.2.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html