Re: [Patch v3 0/6] GSBI CRCI Autoconfiguration Support
> > > > Series looks good, do we need a qcom_defconfig update to enable anything > > new for this? > > > > - k > > I'll send a followup to enable qcom_defconfig. > Correction: Since I use a 'selects MFD_SYSCON' in the Kconfig we shouldn't need anything. -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Patch v3 0/6] GSBI CRCI Autoconfiguration Support
On Tue, Feb 10, 2015 at 11:57:27AM -0600, Kumar Gala wrote: > > On Feb 9, 2015, at 4:01 PM, Andy Gross wrote: > > > This patch set adds support for automatic configuration of GSBI DMA CRCI > > values. > > > > DMA operations require that the ADM CRCI mux values be properly configured > > in > > the TCSR (Top Control and Status Register) block. During probing of a GSBI > > device, the client mode must be declared and this can be used to lookup the > > correct TCSR ADM CRCI MUX settings and then program them so that they are > > correct before any clients are populated. > > > > These patches add the TCSR as a syscon device and that allows the GSBI to > > access and manipulate the ADM CRCI MUX registers to correctly configure the > > values based on the GSBI port configuration. > > > > Changes since v2: > > - Use cell-index instead of alias to denote GSBI instance > > > > Changes since v1: > > - Fixed various review comments > > > > Andy Gross (6): > > soc: qcom: gsbi: Add support for ADM CRCI muxing > > mfd: qcom,tcsr: Add device tree binding for TCSR > > ARM: DT: apq8064: Add TCSR support > > ARM: DT: ipq8064: Add TCSR support > > ARM: DT: msm8660: Add TCSR support > > ARM: DT: msm8960: Add TCSR support > > > > .../devicetree/bindings/mfd/qcom,tcsr.txt | 22 +++ > > .../devicetree/bindings/soc/qcom/qcom,gsbi.txt | 14 +- > > arch/arm/boot/dts/qcom-apq8064.dtsi| 14 ++ > > arch/arm/boot/dts/qcom-ipq8064.dtsi| 14 ++ > > arch/arm/boot/dts/qcom-msm8660.dtsi|8 ++ > > arch/arm/boot/dts/qcom-msm8960.dtsi|8 ++ > > drivers/soc/qcom/Kconfig |1 + > > drivers/soc/qcom/qcom_gsbi.c | 152 > > > > 8 files changed, 232 insertions(+), 1 deletion(-) > > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,tcsr.txt > > Series looks good, do we need a qcom_defconfig update to enable anything new > for this? > > - k I'll send a followup to enable qcom_defconfig. -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Patch v3 0/6] GSBI CRCI Autoconfiguration Support
On Feb 9, 2015, at 4:01 PM, Andy Gross wrote: > This patch set adds support for automatic configuration of GSBI DMA CRCI > values. > > DMA operations require that the ADM CRCI mux values be properly configured in > the TCSR (Top Control and Status Register) block. During probing of a GSBI > device, the client mode must be declared and this can be used to lookup the > correct TCSR ADM CRCI MUX settings and then program them so that they are > correct before any clients are populated. > > These patches add the TCSR as a syscon device and that allows the GSBI to > access and manipulate the ADM CRCI MUX registers to correctly configure the > values based on the GSBI port configuration. > > Changes since v2: > - Use cell-index instead of alias to denote GSBI instance > > Changes since v1: > - Fixed various review comments > > Andy Gross (6): > soc: qcom: gsbi: Add support for ADM CRCI muxing > mfd: qcom,tcsr: Add device tree binding for TCSR > ARM: DT: apq8064: Add TCSR support > ARM: DT: ipq8064: Add TCSR support > ARM: DT: msm8660: Add TCSR support > ARM: DT: msm8960: Add TCSR support > > .../devicetree/bindings/mfd/qcom,tcsr.txt | 22 +++ > .../devicetree/bindings/soc/qcom/qcom,gsbi.txt | 14 +- > arch/arm/boot/dts/qcom-apq8064.dtsi| 14 ++ > arch/arm/boot/dts/qcom-ipq8064.dtsi| 14 ++ > arch/arm/boot/dts/qcom-msm8660.dtsi|8 ++ > arch/arm/boot/dts/qcom-msm8960.dtsi|8 ++ > drivers/soc/qcom/Kconfig |1 + > drivers/soc/qcom/qcom_gsbi.c | 152 > 8 files changed, 232 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,tcsr.txt Series looks good, do we need a qcom_defconfig update to enable anything new for this? - k -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[Patch v3 0/6] GSBI CRCI Autoconfiguration Support
This patch set adds support for automatic configuration of GSBI DMA CRCI values. DMA operations require that the ADM CRCI mux values be properly configured in the TCSR (Top Control and Status Register) block. During probing of a GSBI device, the client mode must be declared and this can be used to lookup the correct TCSR ADM CRCI MUX settings and then program them so that they are correct before any clients are populated. These patches add the TCSR as a syscon device and that allows the GSBI to access and manipulate the ADM CRCI MUX registers to correctly configure the values based on the GSBI port configuration. Changes since v2: - Use cell-index instead of alias to denote GSBI instance Changes since v1: - Fixed various review comments Andy Gross (6): soc: qcom: gsbi: Add support for ADM CRCI muxing mfd: qcom,tcsr: Add device tree binding for TCSR ARM: DT: apq8064: Add TCSR support ARM: DT: ipq8064: Add TCSR support ARM: DT: msm8660: Add TCSR support ARM: DT: msm8960: Add TCSR support .../devicetree/bindings/mfd/qcom,tcsr.txt | 22 +++ .../devicetree/bindings/soc/qcom/qcom,gsbi.txt | 14 +- arch/arm/boot/dts/qcom-apq8064.dtsi| 14 ++ arch/arm/boot/dts/qcom-ipq8064.dtsi| 14 ++ arch/arm/boot/dts/qcom-msm8660.dtsi|8 ++ arch/arm/boot/dts/qcom-msm8960.dtsi|8 ++ drivers/soc/qcom/Kconfig |1 + drivers/soc/qcom/qcom_gsbi.c | 152 8 files changed, 232 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mfd/qcom,tcsr.txt -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
