[digitalradio] Callsign info Fill-in
I am using Multipsk v 4.14 with DXLabs. Commander is Connected Spot C: Is ON. Initially I have Freq, Mode, Ur RST, My RST, R, S, filled in. When I click on a station in the rx window, The callsign is placed Under CALL. However Name, Locator, QTH. remain empty. Is there a way to get these fields populated from DXLabs? Items such as SEARCH , Number which could provide pertinent information about the present contact require additional intervention. 73 Stan N1ZX
[digitalradio] Multipsk Lock transmit freq
How can I lock the transmit freq when in PSK31 or Oliver so that my TX does not follow the other station ? 73 Stan N1ZX
[digitalradio] CW Contest logging program
I am unsuccessful in getting N1MM to work with my setup. I am looking for comments, on other contest logging programs that would work using USB to Navigator with internal Winkey 73 Stan N1ZX
[digitalradio] Connectors
Off topic, however I need some help with my connectors. I have my station connectorized with power poles and a Rigrunner distribution pannel. I find that with the Red and Black pair on the supply end and the corresponding Red and Black pair on the load end, it is possible to short circuit the powersupply if the connector pair is displaced to the left or right. I have tried using a -one up one down- of the tabs on the front of the conncctor pair to form a key, but when this is done on one end, the corresponding end cannot be configured in a matching manner because of the connector shell shows two tongues, where they shold be a tongue and a groove, therefore this connector pair cannot be mated together. I immagine I could remove the tongues and use super glue to hold one pair of connectors together. Does any one have any ideas or a better solution as to how I can solve this problem. 73 Stan N1ZX
[digitalradio] Multipsk 4111
Hello I am getting started with Multipsk and have the latest 4111. I have the following questions Should I use it as is. or should I go ahead and register the softwar for the additional features ?. I intend to log and use the features of DXLabs. My system is a Lsptop PC, Navigator interface, Icom Pro 3. Besides the documentation. Does any one have, or is there a simplified sequential setup procedure to get this software running and cross over to DXLabs? 73 Stan N1ZX
[digitalradio] Remote CW over the internet
My setup is basically a PC with digital mode software, Interface and Radio. I am experimenting with Log-Me-In software to operate my base station PC over the internet. At present I can operate the digital modes such as PSK over the internet from the remote PC. In the case of CW, I am looking for for a means of passing CW audio from the RX back to the remote location. 73 Stan