Re: [digitalradio] Bad sound card?
Thanks for all the suggestions. I was unable to find where to turn off all the fancy options for this sound card. I did see where to enable some options, but all were disabled. I was connected into the Front Speaker jack. It does have an environment setting, which was set to Normal. I could have chosen options like Small Room, Large Room, Auditorium, etc... Anyway, I solved my problem by just flipping my use of the cards. I connected my computer speakers to the new card and used the internal sound card for the digital modes. Thanks, Jeremy KB8LFA
Re: [digitalradio] Bad sound card?
On 06/05/2010 03:24 PM, Jeremy Cowgar wrote: Do you have any ideas? It's just $10, but I'd really like to have a dedicated sound card for the ham stuff, and please do not suggest a Signalink as I already have a nice setup, I know your problem - the sound card's too expensive :) I got a Cmedia Cm108 USB soundcard for $7 and it seems to do the trick here. The sockets for the connectors are not very good physically (I ended up soldering wires directly to the circuit board) but the audio quality is perfect for HF. -- All rights reversed.
RE: [digitalradio] Bad sound card?
Could it be that the card is set up for 5.1 surround instead of simple 2-channel stereo, or that you actually have the audio out connected to the wrong output - like the rear speakers on 5.1 surround? Most sound cards I've used come with a console that lets you set the card for various protocols, like 5.1 and so on. Hope it's something simple like that! Good luck es 73 Dave KB3MOW -Original Message- From: digitalradio@yahoogroups.com [mailto:digitalra...@yahoogroups.com]on Behalf Of Jeremy Cowgar Sent: Saturday, June 05, 2010 3:25 PM To: digitalradio@yahoogroups.com Subject: [digitalradio] Bad sound card? Hello, When purchasing a new radio this last week I decided to also set my computer up how it should have been long ago. I purchased a sound card to dedicate it to digital modes. The sound card purchased was: http://www.microcenter.com/single_product_results.phtml?product_id=0239854 It was $9.99... I wasn't asking for the world, but I didn't think I would get this. I am curious as to what you think? Here's the synario. I connect the line out to my rig blaster and when I transmit I get this: http://jeremy.cowgar.com/files/bad_sound_card.wav This was recorded from my mom's station that is 8 miles away. Obvious problem. I then simply moved the line out cable from my new sound card to my old sound card that is built into my mother board. No other changes. I do not have a recording of it, but it's beautiful, exactly how a feldhell signal should sound. Now, the most obvious thing would be is my sound settings wrong, i.e. way overdriving with the new sound card or something. I set them up the same. Looking at my ALC meter, I transmit into a dummy load, turn the line out volume up until I get ALC movement, then turn it back down until I cannot notice any ALC movement. Do you have any ideas? It's just $10, but I'd really like to have a dedicated sound card for the ham stuff, and please do not suggest a Signalink as I already have a nice setup, all wired and working, I just need to get this squared away. Until then, I'm working off my sound card built into the motherboard. Thanks for any help, Jeremy KB8LFA
Re: [digitalradio] Bad sound card?
Jeremy Maybe the fact that it was 10 bucks may have something to do with it. At 02:24 PM 6/5/2010, you wrote: Hello, When purchasing a new radio this last week I decided to also set my computer up how it should have been long ago. I purchased a sound card to dedicate it to digital modes. The sound card purchased was: http://www.microcenter.com/single_product_results.phtml?product_id=0239854 It was $9.99... I wasn't asking for the world, but I didn't think I would get this. I am curious as to what you think? Here's the synario. I connect the line out to my rig blaster and when I transmit I get this: http://jeremy.cowgar.com/files/bad_sound_card.wav This was recorded from my mom's station that is 8 miles away. Obvious problem. I then simply moved the line out cable from my new sound card to my old sound card that is built into my mother board. No other changes. I do not have a recording of it, but it's beautiful, exactly how a feldhell signal should sound. Now, the most obvious thing would be is my sound settings wrong, i.e. way overdriving with the new sound card or something. I set them up the same. Looking at my ALC meter, I transmit into a dummy load, turn the line out volume up until I get ALC movement, then turn it back down until I cannot notice any ALC movement. Do you have any ideas? It's just $10, but I'd really like to have a dedicated sound card for the ham stuff, and please do not suggest a Signalink as I already have a nice setup, all wired and working, I just need to get this squared away. Until then, I'm working off my sound card built into the motherboard. Thanks for any help, Jeremy KB8LFA http://www.obriensweb.com/digispotter.html Chat, Skeds, and Spots all in one (resize to suit) Facebook= http://www.facebook.com/pages/digitalradio/123270301037522 Yahoo! Groups Links
Re: [digitalradio] Bad sound card?
Yes, Dave, it is 6-channel card, so maybe Jeremey can disable four of the channels and any special effects. 73 - Skip KH6TY Dave 'Doc' Corio wrote: Could it be that the card is set up for 5.1 surround instead of simple 2-channel stereo, or that you actually have the audio out connected to the wrong output - like the rear speakers on 5.1 surround? Most sound cards I've used come with a console that lets you set the card for various protocols, like 5.1 and so on. Hope it's something simple like that! Good luck es 73 Dave KB3MOW -Original Message- *From:* digitalradio@yahoogroups.com [mailto:digitalra...@yahoogroups.com]*on Behalf Of *Jeremy Cowgar *Sent:* Saturday, June 05, 2010 3:25 PM *To:* digitalradio@yahoogroups.com *Subject:* [digitalradio] Bad sound card? Hello, When purchasing a new radio this last week I decided to also set my computer up how it should have been long ago. I purchased a sound card to dedicate it to digital modes. The sound card purchased was: http://www.microcenter.com/single_product_results.phtml?product_id=0239854 http://www.microcenter.com/single_product_results.phtml?product_id=0239854 It was $9.99... I wasn't asking for the world, but I didn't think I would get this. I am curious as to what you think? Here's the synario. I connect the line out to my rig blaster and when I transmit I get this: http://jeremy.cowgar.com/files/bad_sound_card.wav http://jeremy.cowgar.com/files/bad_sound_card.wav This was recorded from my mom's station that is 8 miles away. Obvious problem. I then simply moved the line out cable from my new sound card to my old sound card that is built into my mother board. No other changes. I do not have a recording of it, but it's beautiful, exactly how a feldhell signal should sound. Now, the most obvious thing would be is my sound settings wrong, i.e. way overdriving with the new sound card or something. I set them up the same. Looking at my ALC meter, I transmit into a dummy load, turn the line out volume up until I get ALC movement, then turn it back down until I cannot notice any ALC movement. Do you have any ideas? It's just $10, but I'd really like to have a dedicated sound card for the ham stuff, and please do not suggest a Signalink as I already have a nice setup, all wired and working, I just need to get this squared away. Until then, I'm working off my sound card built into the motherboard. Thanks for any help, Jeremy KB8LFA