Re: [Discuss-gnuradio] Bug with USRP2/SBX and UHD when launching the acquisition
2011/8/5 Marcus D. Leech mle...@ripnet.com: On 05/08/2011 10:33 AM, Emmanuel Caillé wrote: Hello all, I have a problem with my USRP2 (with a SBX board) : Most of times when I launch the acquisition, no data are received. For example with uhd_fft.py : $ uhd_fft.py linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.002.001-fc349d3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes and the FFT Plotter appear but is empty. Also, what do you get with uhd_usrp_probe --args addr=192.168.10.2 (or whatever you've set the IP addr of the USRP2 to). There are no samples (autoscale don't do anything) and there are no timeout errors. I perfectly ping the device (with 0% packet loss). I don't understand why sometimes it works and at other times it doesn't (without changing any option). $ uhd_usrp_probe linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.002.001-fc349d3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes _ / | Device: USRP2 / N-Series Device | _ |/ | | Mboard: USRP2-REV4 | | rev: 1024 | | mac-addr: 00:50:c2:85:3a:a4 | | ip-addr: 10.66.160.164 | | gpsdo: none | | serial: 2724 | | | | Time sources: none, external, _external_, mimo | | Clock sources: internal, external, mimo | | Sensors: mimo_locked, ref_locked | | _ | |/ | | | RX DSP: 0 | | | Freq range: -50.000 to 50.000 Mhz | | _ | |/ | | | RX DSP: 1 | | | Freq range: -50.000 to 50.000 Mhz | | _ | |/ | | | RX Dboard: A | | | ID: SBX (0x0054) | | | Serial: E7R10Y0XS | | | _ | | |/ | | | | RX Subdev: 0 | | | | Name: SBX (0x0054) | | | | Antennas: TX/RX, RX2 | | | | Sensors: lo_locked | | | | Freq range: 68.750 to 4400.000 Mhz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | |/ | | | | RX Codec: A | | | | Name: ltc2284 | | | | Gain Elements: None | | _ | |/ | | | TX DSP: 0 | | | Freq range: -250.000 to 250.000 Mhz | | _ | |/ | | | TX Dboard: A | | | ID: SBX (0x0055) | | | Serial: E7R10Y0XS | | | _ | | |/ | | | | TX Subdev: 0 | | | | Name: SBX (0x0055) | | | | Antennas: TX/RX | | | | Sensors: lo_locked | | | | Freq range: 68.750 to 4400.000 Mhz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Connection Type: QI | | | | Uses LO offset: No | | | _ | | |/ | | | | TX Codec: A | | | | Name: ad9777 | | | | Gain Elements: None (I had the same problem when I used the 192.168.10.2 IP) ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Bug with USRP2/SBX and UHD when launching the acquisition
2011/8/8 Emmanuel Caillé emmanuel.cai...@telecom-bretagne.eu: 2011/8/5 Marcus D. Leech mle...@ripnet.com: On 05/08/2011 10:33 AM, Emmanuel Caillé wrote: Hello all, I have a problem with my USRP2 (with a SBX board) : Most of times when I launch the acquisition, no data are received. For example with uhd_fft.py : $ uhd_fft.py linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.002.001-fc349d3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes and the FFT Plotter appear but is empty. Also, what do you get with uhd_usrp_probe --args addr=192.168.10.2 (or whatever you've set the IP addr of the USRP2 to). There are no samples (autoscale don't do anything) and there are no timeout errors. I perfectly ping the device (with 0% packet loss). I don't understand why sometimes it works and at other times it doesn't (without changing any option). $ uhd_usrp_probe linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.002.001-fc349d3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes _ / | Device: USRP2 / N-Series Device | _ | / | | Mboard: USRP2-REV4 | | rev: 1024 | | mac-addr: 00:50:c2:85:3a:a4 | | ip-addr: 10.66.160.164 | | gpsdo: none | | serial: 2724 | | | | Time sources: none, external, _external_, mimo | | Clock sources: internal, external, mimo | | Sensors: mimo_locked, ref_locked | | _ | | / | | | RX DSP: 0 | | | Freq range: -50.000 to 50.000 Mhz | | _ | | / | | | RX DSP: 1 | | | Freq range: -50.000 to 50.000 Mhz | | _ | | / | | | RX Dboard: A | | | ID: SBX (0x0054) | | | Serial: E7R10Y0XS | | | _ | | | / | | | | RX Subdev: 0 | | | | Name: SBX (0x0054) | | | | Antennas: TX/RX, RX2 | | | | Sensors: lo_locked | | | | Freq range: 68.750 to 4400.000 Mhz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | | / | | | | RX Codec: A | | | | Name: ltc2284 | | | | Gain Elements: None | | _ | | / | | | TX DSP: 0 | | | Freq range: -250.000 to 250.000 Mhz | | _ | | / | | | TX Dboard: A | | | ID: SBX (0x0055) | | | Serial: E7R10Y0XS | | | _ | | | / | | | | TX Subdev: 0 | | | | Name: SBX (0x0055) | | | | Antennas: TX/RX | | | | Sensors: lo_locked | | | | Freq range: 68.750 to 4400.000 Mhz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Connection Type: QI | | | | Uses LO offset: No | | | _ | | | / | | | | TX Codec: A | | | | Name: ad9777 | | | | Gain Elements: None (I had the same problem when I used the 192.168.10.2 IP) I fixed my problem : I replaced my Gigabit Switch with a crossed cable and know everything work fine. Thanks for your advices. -- Emmanuel ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Discuss-gnuradio] Bug with USRP2/SBX and UHD when launching the acquisition
Hello all, I have a problem with my USRP2 (with a SBX board) : Most of times when I launch the acquisition, no data are received. For example with uhd_fft.py : $ uhd_fft.py linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.002.001-fc349d3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes and the FFT Plotter appear but is empty. I have to try up to five times to make it work. Anyone having the same problem ? Or do you know what may it be ? If it can help, I am using a Gigabit Switch and Ubuntu 11.04 -- Emmanuel ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Bug with USRP2/SBX and UHD when launching the acquisition
On 08/05/2011 07:33 AM, Emmanuel Caillé wrote: Hello all, I have a problem with my USRP2 (with a SBX board) : Most of times when I launch the acquisition, no data are received. For example with uhd_fft.py : $ uhd_fft.py linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.002.001-fc349d3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes and the FFT Plotter appear but is empty. I have to try up to five times to make it work. Anyone having the same problem ? Or do you know what may it be ? 1) If there were no samples, you would see a timeout error printed to the terminal. 2) If the samples were all zero, press autoscale, you should see a horizontal blue line. Which one do you see? If it can help, I am using a Gigabit Switch and Ubuntu 11.04 -- Emmanuel ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Bug with USRP2/SBX and UHD when launching the acquisition
On 05/08/2011 10:33 AM, Emmanuel Caillé wrote: Hello all, I have a problem with my USRP2 (with a SBX board) : Most of times when I launch the acquisition, no data are received. For example with uhd_fft.py : $ uhd_fft.py linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.002.001-fc349d3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes and the FFT Plotter appear but is empty. Also, what do you get with uhd_usrp_probe --args addr=192.168.10.2 (or whatever you've set the IP addr of the USRP2 to). ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio