Re: [Discuss-gnuradio] Sampling rate mismatch in Fedora Core 5
2006/11/11, Tarun Tiwari <[EMAIL PROTECTED]>: The GUI is opening very well, and I can see the frequency spectrum. After getting this error, I wen to the control centre of Fedora Core 5, and changed the default sampling rate to 32000 Hz, but the problem was not resolved. Copy'n'pasted from the archives: The solution is to add "-O plughw:0,0" to the end of your command line (without the quotes), which causes ALSA to resample the output to be at a compatible sample rate. -- Trond Danielsen ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Discuss-gnuradio] Sampling rate mismatch in Fedora Core 5
Hi,After a long wait I recieved the hardware. I was trying to run FM Reciever but there is some problem related to the sampling rate of my computer. I received following error message: [EMAIL PROTECTED] usrp]# ./usrp_wfm_rcv.pyUsing RX d'board A: Basic Rx>>> gr_fir_ccf: using SSE >>> gr_fir_fff: using SSEaudio_alsa_sink[hw:0,0]: unable to support sampling rate 32000 card requested 44100 instead.** (python:16205): WARNING **: IPP request failed with status 1030 ** (python:16205): WARNING **: IPP request failed with status 1030 FYI: No Powermate or Contour Knob foundThe GUI is opening very well, and I can see the frequency spectrum. After getting this error, I wen to the control centre of Fedora Core 5, and changed the default sampling rate to 32000 Hz, but the problem was not resolved. Can somebody tell me how to deal with this problem? And, what does the IPP Request error tell exactly?Thank youTarun ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio