Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
Hi Tom, I don't change any files in the source code. I have downloaded the source code again this morning by: git clone git://git.gnuradio.org/gnuradio The installation environment: Ubuntu 12.04 32bit, with kernel version Linux 3.2.0-51-generic-pae, Intel(R) Core(tm) i7-3770 CPU @ 3.40GHz × 8 . Thanks, Damon 2013/8/23 Tom Rondeau > On Fri, Aug 23, 2013 at 10:32 AM, Marcus Leech wrote: > > Is this a 32-bit install on 64-bit hardware issue? > > Possibly. I was wondering about that, too. Thought we had fixed those > issues, but this might be a new version of it. > > -- > Tom > Visit us at GRCon13 Oct. 1 - 4 > http://www.trondeau.com/grcon13 > > > > > on Aug 23, 2013, Tom Rondeau wrote: > > > > On Fri, Aug 23, 2013 at 1:53 AM, Damon wrote: > >> > >>> On Tue, Aug 20, 2013 at 9:05 AM, Damon > wrote: > > > > On Mon, Aug 19, 2013 at 8:29 AM, Damon > > wrote: > >> > >> Hi all, > >> > >> I tried installing GNUradio v3.7.1git. The build completed, but > >> several > >> of > >> the build tests fail. > >> > >> The OS is Ubuntu 12.04 32bit, with kernel version Linux > >> 3.2.0-51-generic-pae. CPU is Intel(R) Core(tm) i7-3770 CPU @ 3.40GHz × > >> 8 > . > >> > >> The prerequisites were built by : > >> apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig > >> g++ > >> \ > >> automake autoconf libtool python-dev libfftw3-dev \ > >> libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev > fort77 > >> \ > >> libsdl1.2-dev python-wxgtk2.8 git-core \ > >> libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ > >> python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \ > >> libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools > python-qwt5-qt4 \ > >> cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf > >> r-base-dev > >> python-tk \ > >> liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 > >> > >> then I ran cmake, make and make test. > >> The following tests FAILED: > >> 1 - qa_volk_test_all (Failed) > >> 85 - qa_freq_xlating_fir_filter (Failed) > >> 93 - qa_fir_filter (Failed) > >> 167 - qa_codec2_vocoder (Failed) > >> So I ran: > >> ctest --output-on-failure -O ctest_log_file > >> Attached please find the log file. > >> > >> How to fix it? > >> > >> Best regards, > >> Damon > > > > Damon, > > > > Thanks for the detailed report. Can you try uninstalling ORC and > > rebuilding without it? It looks like those errors might be related to > > differences in precision/rounding with ORC. > > > > And ignore the codec2 problem, unless you specifically want to use > > codec2. It's a known problem, but we don't have a fix for it, yet. > > > Hi Tom, > > There are 2 orc installed: liborc-0.4-0 and liborc-0.4-dev. > I uninstalled liborc-0.4-dev, rebuilt gnuradio. The volk passed > test. But several tests failed: > > 85 - qa_freq_xlating_fir_filter (Failed) > 93 - qa_fir_filter (Failed) > 167 - qa_codec2_vocoder (Failed) > Attached please find the log file: ctest_log_file. > > In my another computer, I uninstalled both liborc-0.4-0 and > liborc-0.4-dev. > Then I rebuilt uhd and gnuradio v3.7.0. Three tests mentioned above > failed > too. > Attached please find the log file: ctest_log_file2. > > Any suggestions? > > Thanks, > Damon > > >>> So again, let's not worry about the codec2 failure; that's something > >>> different. The two filter failures are probably related to the same > >>> issue since one uses the other. > >>> > >>> Can you try running volk_profile to make sure you Volk config file is > >>> created correctly? Then rerun those filter tests. > >>> > >> Hi Tom, > >> > >> After I have run volk_profile, more tests failed: > >> > >> 76 - test_gr_filter (Failed) > >> 83 - qa_fft_filter (Failed) > >> 85 - qa_freq_xlating_fir_filter (Failed) > >> 89 - qa_adaptive_fir_filter (Failed) > >> 93 - qa_fir_filter (Failed) > >> 125 - qa_cma_equalizer (Failed) > >> 132 - qa_ofdm_sync_sc_cfb (Failed) > >> 135 - qa_lms_equalizer (Failed) > >> 150 - qa_ofdm_txrx (Failed) > >> 167 - qa_codec2_vocoder (Failed) > >> > >> Attached please find the volk_config file and ctest_log_file. > >> > >> Regards, > >> Damon > > > > > > Strange as it sounds, those results actually look better. I'm not sure > > about the divide by zero case for the fft_filters, but the other > > results you have are very close to what they should be. It almost > > looks like there is an off-by-1 indexing problem. Either that or your > > ALU is messed up. But there's something strange about the numbers > > you're showing. And you haven't changed any files in the source code > > (that is, 'git status' shows nothing)? > > > > -- > > Tom > > Visit us at GRCon13 Oct. 1 - 4 > > http://www.t
Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
On Fri, Aug 23, 2013 at 10:32 AM, Marcus Leech wrote: > Is this a 32-bit install on 64-bit hardware issue? Possibly. I was wondering about that, too. Thought we had fixed those issues, but this might be a new version of it. -- Tom Visit us at GRCon13 Oct. 1 - 4 http://www.trondeau.com/grcon13 > > on Aug 23, 2013, Tom Rondeau wrote: > > On Fri, Aug 23, 2013 at 1:53 AM, Damon wrote: >> >>> On Tue, Aug 20, 2013 at 9:05 AM, Damon wrote: > > On Mon, Aug 19, 2013 at 8:29 AM, Damon > wrote: >> >> Hi all, >> >> I tried installing GNUradio v3.7.1git. The build completed, but >> several >> of >> the build tests fail. >> >> The OS is Ubuntu 12.04 32bit, with kernel version Linux >> 3.2.0-51-generic-pae. CPU is Intel® Core™ i7-3770 CPU @ 3.40GHz × 8 . >> >> The prerequisites were built by : >> apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig >> g++ >> \ >> automake autoconf libtool python-dev libfftw3-dev \ >> libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev fort77 >> \ >> libsdl1.2-dev python-wxgtk2.8 git-core \ >> libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ >> python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \ >> libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 \ >> cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf >> r-base-dev >> python-tk \ >> liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 >> >> then I ran cmake, make and make test. >> The following tests FAILED: >> 1 - qa_volk_test_all (Failed) >> 85 - qa_freq_xlating_fir_filter (Failed) >> 93 - qa_fir_filter (Failed) >> 167 - qa_codec2_vocoder (Failed) >> So I ran: >> ctest --output-on-failure -O ctest_log_file >> Attached please find the log file. >> >> How to fix it? >> >> Best regards, >> Damon > > Damon, > > Thanks for the detailed report. Can you try uninstalling ORC and > rebuilding without it? It looks like those errors might be related to > differences in precision/rounding with ORC. > > And ignore the codec2 problem, unless you specifically want to use > codec2. It's a known problem, but we don't have a fix for it, yet. > Hi Tom, There are 2 orc installed: liborc-0.4-0 and liborc-0.4-dev. I uninstalled liborc-0.4-dev, rebuilt gnuradio. The volk passed test. But several tests failed: 85 - qa_freq_xlating_fir_filter (Failed) 93 - qa_fir_filter (Failed) 167 - qa_codec2_vocoder (Failed) Attached please find the log file: ctest_log_file. In my another computer, I uninstalled both liborc-0.4-0 and liborc-0.4-dev. Then I rebuilt uhd and gnuradio v3.7.0. Three tests mentioned above failed too. Attached please find the log file: ctest_log_file2. Any suggestions? Thanks, Damon >>> So again, let's not worry about the codec2 failure; that's something >>> different. The two filter failures are probably related to the same >>> issue since one uses the other. >>> >>> Can you try running volk_profile to make sure you Volk config file is >>> created correctly? Then rerun those filter tests. >>> >> Hi Tom, >> >> After I have run volk_profile, more tests failed: >> >> 76 - test_gr_filter (Failed) >> 83 - qa_fft_filter (Failed) >> 85 - qa_freq_xlating_fir_filter (Failed) >> 89 - qa_adaptive_fir_filter (Failed) >> 93 - qa_fir_filter (Failed) >> 125 - qa_cma_equalizer (Failed) >> 132 - qa_ofdm_sync_sc_cfb (Failed) >> 135 - qa_lms_equalizer (Failed) >> 150 - qa_ofdm_txrx (Failed) >> 167 - qa_codec2_vocoder (Failed) >> >> Attached please find the volk_config file and ctest_log_file. >> >> Regards, >> Damon > > > Strange as it sounds, those results actually look better. I'm not sure > about the divide by zero case for the fft_filters, but the other > results you have are very close to what they should be. It almost > looks like there is an off-by-1 indexing problem. Either that or your > ALU is messed up. But there's something strange about the numbers > you're showing. And you haven't changed any files in the source code > (that is, 'git status' shows nothing)? > > -- > Tom > Visit us at GRCon13 Oct. 1 - 4 > http://www.trondeau.com/grcon13 ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
Is this a 32-bit install on 64-bit hardware issue? on Aug 23, 2013, Tom Rondeau wrote: On Fri, Aug 23, 2013 at 1:53 AM, Damonwrote:>>> On Tue, Aug 20, 2013 at 9:05 AM, Damon wrote: On Mon, Aug 19, 2013 at 8:29 AM, Damon wrote:>> Hi all,>> I tried installing GNUradio v3.7.1git. The build completed, but several> of> the build tests fail.>> The OS is Ubuntu 12.04 32bit, with kernel version Linux> 3.2.0-51-generic-pae. CPU is Intel® Core™ i7-3770 CPU @ 3.40GHz × 8 .>> The prerequisites were built by :> apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig g++> \> automake autoconf libtool python-dev libfftw3-dev \> libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev fort77> \> libsdl1.2-dev python-wxgtk2.8 git-core \> libqt4-dev python-numpy ccache python-opengl libgsl0-dev \> python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \> libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 \> cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf> r-base-dev> python-tk \> liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2>> then I ran cmake, make and make test.> The following tests FAILED:> 1 - qa_volk_test_all (Failed)> 85 - qa_freq_xlating_fir_filter (Failed)> 93 - qa_fir_filter (Failed)> 167 - qa_codec2_vocoder (Failed)> So I ran:> ctest --output-on-failure -O ctest_log_file> Attached please find the log file.>> How to fix it?>> Best regards,> Damon Damon, Thanks for the detailed report. Can you try uninstalling ORC and rebuilding without it? It looks like those errors might be related to differences in precision/rounding with ORC. And ignore the codec2 problem, unless you specifically want to use codec2. It's a known problem, but we don't have a fix for it, yet.>>> Hi Tom,>> There are 2 orc installed: liborc-0.4-0 and liborc-0.4-dev.>>> I uninstalled liborc-0.4-dev, rebuilt gnuradio. The volk passed>>> test. But several tests failed:>> 85 - qa_freq_xlating_fir_filter (Failed)>>> 93 - qa_fir_filter (Failed)>>> 167 - qa_codec2_vocoder (Failed)>>> Attached please find the log file: ctest_log_file.>> In my another computer, I uninstalled both liborc-0.4-0 and>>> liborc-0.4-dev.>>> Then I rebuilt uhd and gnuradio v3.7.0. Three tests mentioned above>>> failed>>> too.>>> Attached please find the log file: ctest_log_file2.>> Any suggestions?>> Thanks,>>> Damon> So again, let's not worry about the codec2 failure; that's something>> different. The two filter failures are probably related to the same>> issue since one uses the other. Can you try running volk_profile to make sure you Volk config file is>> created correctly? Then rerun those filter tests.>>> Hi Tom,>> After I have run volk_profile, more tests failed:>> 76 - test_gr_filter (Failed)> 83 - qa_fft_filter (Failed)> 85 - qa_freq_xlating_fir_filter (Failed)> 89 - qa_adaptive_fir_filter (Failed)> 93 - qa_fir_filter (Failed)> 125 - qa_cma_equalizer (Failed)> 132 - qa_ofdm_sync_sc_cfb (Failed)> 135 - qa_lms_equalizer (Failed)> 150 - qa_ofdm_txrx (Failed)> 167 - qa_codec2_vocoder (Failed)>> Attached please find the volk_config file and ctest_log_file.>> Regards,> DamonStrange as it sounds, those results actually look better. I'm not sureabout the divide by zero case for the fft_filters, but the otherresults you have are very close to what they should be. It almostlooks like there is an off-by-1 indexing problem. Either that or yourALU is messed up. But there's something strange about the numbersyou're showing. And you haven't changed any files in the source code(that is, 'git status' shows nothing)?-- TomVisit us at GRCon13 Oct. 1 - 4http://www.trondeau.com/grcon13___Discuss-gnuradio mailing listDiscuss-gnuradio@gnu.orghttps://lists.gnu.org/mailman/listinfo/discuss-gnuradio ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
On Fri, Aug 23, 2013 at 1:53 AM, Damon wrote: > >> On Tue, Aug 20, 2013 at 9:05 AM, Damon wrote: On Mon, Aug 19, 2013 at 8:29 AM, Damon wrote: > > Hi all, > > I tried installing GNUradio v3.7.1git. The build completed, but several > of > the build tests fail. > > The OS is Ubuntu 12.04 32bit, with kernel version Linux > 3.2.0-51-generic-pae. CPU is Intel® Core™ i7-3770 CPU @ 3.40GHz × 8 . > > The prerequisites were built by : > apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig g++ > \ > automake autoconf libtool python-dev libfftw3-dev \ > libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev fort77 > \ > libsdl1.2-dev python-wxgtk2.8 git-core \ > libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ > python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \ > libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 \ > cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf > r-base-dev > python-tk \ > liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 > > then I ran cmake, make and make test. > The following tests FAILED: > 1 - qa_volk_test_all (Failed) >85 - qa_freq_xlating_fir_filter (Failed) >93 - qa_fir_filter (Failed) > 167 - qa_codec2_vocoder (Failed) > So I ran: > ctest --output-on-failure -O ctest_log_file > Attached please find the log file. > > How to fix it? > > Best regards, > Damon Damon, Thanks for the detailed report. Can you try uninstalling ORC and rebuilding without it? It looks like those errors might be related to differences in precision/rounding with ORC. And ignore the codec2 problem, unless you specifically want to use codec2. It's a known problem, but we don't have a fix for it, yet. >>> Hi Tom, >>> >>> There are 2 orc installed: liborc-0.4-0 and liborc-0.4-dev. >>> I uninstalled liborc-0.4-dev, rebuilt gnuradio. The volk passed >>> test. But several tests failed: >>> >>> 85 - qa_freq_xlating_fir_filter (Failed) >>> 93 - qa_fir_filter (Failed) >>> 167 - qa_codec2_vocoder (Failed) >>> Attached please find the log file: ctest_log_file. >>> >>> In my another computer, I uninstalled both liborc-0.4-0 and >>> liborc-0.4-dev. >>> Then I rebuilt uhd and gnuradio v3.7.0. Three tests mentioned above >>> failed >>> too. >>> Attached please find the log file: ctest_log_file2. >>> >>> Any suggestions? >>> >>> Thanks, >>> Damon >>> >> So again, let's not worry about the codec2 failure; that's something >> different. The two filter failures are probably related to the same >> issue since one uses the other. >> >> Can you try running volk_profile to make sure you Volk config file is >> created correctly? Then rerun those filter tests. >> > Hi Tom, > > After I have run volk_profile, more tests failed: > > 76 - test_gr_filter (Failed) > 83 - qa_fft_filter (Failed) > 85 - qa_freq_xlating_fir_filter (Failed) > 89 - qa_adaptive_fir_filter (Failed) > 93 - qa_fir_filter (Failed) > 125 - qa_cma_equalizer (Failed) > 132 - qa_ofdm_sync_sc_cfb (Failed) > 135 - qa_lms_equalizer (Failed) > 150 - qa_ofdm_txrx (Failed) > 167 - qa_codec2_vocoder (Failed) > > Attached please find the volk_config file and ctest_log_file. > > Regards, > Damon Strange as it sounds, those results actually look better. I'm not sure about the divide by zero case for the fft_filters, but the other results you have are very close to what they should be. It almost looks like there is an off-by-1 indexing problem. Either that or your ALU is messed up. But there's something strange about the numbers you're showing. And you haven't changed any files in the source code (that is, 'git status' shows nothing)? -- Tom Visit us at GRCon13 Oct. 1 - 4 http://www.trondeau.com/grcon13 ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
On Tue, Aug 20, 2013 at 9:05 AM, Damon wrote: On Mon, Aug 19, 2013 at 8:29 AM, Damon wrote: Hi all, I tried installing GNUradio v3.7.1git. The build completed, but several of the build tests fail. The OS is Ubuntu 12.04 32bit, with kernel version Linux 3.2.0-51-generic-pae. CPU is Intel® Core™ i7-3770 CPU @ 3.40GHz × 8 . The prerequisites were built by : apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig g++ \ automake autoconf libtool python-dev libfftw3-dev \ libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev fort77 \ libsdl1.2-dev python-wxgtk2.8 git-core \ libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \ libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 \ cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf r-base-dev python-tk \ liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 then I ran cmake, make and make test. The following tests FAILED: 1 - qa_volk_test_all (Failed) 85 - qa_freq_xlating_fir_filter (Failed) 93 - qa_fir_filter (Failed) 167 - qa_codec2_vocoder (Failed) So I ran: ctest --output-on-failure -O ctest_log_file Attached please find the log file. How to fix it? Best regards, Damon Damon, Thanks for the detailed report. Can you try uninstalling ORC and rebuilding without it? It looks like those errors might be related to differences in precision/rounding with ORC. And ignore the codec2 problem, unless you specifically want to use codec2. It's a known problem, but we don't have a fix for it, yet. Hi Tom, There are 2 orc installed: liborc-0.4-0 and liborc-0.4-dev. I uninstalled liborc-0.4-dev, rebuilt gnuradio. The volk passed test. But several tests failed: 85 - qa_freq_xlating_fir_filter (Failed) 93 - qa_fir_filter (Failed) 167 - qa_codec2_vocoder (Failed) Attached please find the log file: ctest_log_file. In my another computer, I uninstalled both liborc-0.4-0 and liborc-0.4-dev. Then I rebuilt uhd and gnuradio v3.7.0. Three tests mentioned above failed too. Attached please find the log file: ctest_log_file2. Any suggestions? Thanks, Damon So again, let's not worry about the codec2 failure; that's something different. The two filter failures are probably related to the same issue since one uses the other. Can you try running volk_profile to make sure you Volk config file is created correctly? Then rerun those filter tests. Hi Tom, After I have run volk_profile, more tests failed: 76 - test_gr_filter (Failed) 83 - qa_fft_filter (Failed) 85 - qa_freq_xlating_fir_filter (Failed) 89 - qa_adaptive_fir_filter (Failed) 93 - qa_fir_filter (Failed) 125 - qa_cma_equalizer (Failed) 132 - qa_ofdm_sync_sc_cfb (Failed) 135 - qa_lms_equalizer (Failed) 150 - qa_ofdm_txrx (Failed) 167 - qa_codec2_vocoder (Failed) Attached please find the volk_config file and ctest_log_file. Regards, Damon [HANDLER_OUTPUT] Test project /root/gnuradio/build Start 1: qa_volk_test_all 1/176 Test #1: qa_volk_test_all . Passed0.71 sec Start 2: gr-runtime-test 2/176 Test #2: gr-runtime-test .. Passed3.03 sec Start 3: gr-pmt-test 3/176 Test #3: gr-pmt-test .. Passed1.02 sec Start 4: qa_feval 4/176 Test #4: qa_feval . Passed0.07 sec Start 5: qa_kludged_imports 5/176 Test #5: qa_kludged_imports ... Passed0.07 sec Start 6: qa_tag_utils 6/176 Test #6: qa_tag_utils . Passed0.07 sec Start 7: qa_pmt_to_python 7/176 Test #7: qa_pmt_to_python . Passed0.06 sec Start 8: qa_pmt 8/176 Test #8: qa_pmt ... Passed0.07 sec Start 9: test_gr_blocks 9/176 Test #9: test_gr_blocks ... Passed0.48 sec Start 10: qa_file_metadata 10/176 Test #10: qa_file_metadata . Passed0.15 sec Start 11: qa_moving_average 11/176 Test #11: qa_moving_average Passed0.20 sec Start 12: qa_sample_and_hold 12/176 Test #12: qa_sample_and_hold ... Passed0.12 sec Start 13: qa_skiphead 13/176 Test #13: qa_skiphead .. Passed0.27 sec Start 14: qa_keep_m_in_n 14/176 Test #14: qa_keep_m_in_n ... Passed0.12 sec Start 15: qa_vector_map 15/176 Test #15: qa_vector_map Passed0.14 sec Start 16: qa_transcendental 16/176 Test #16: qa_transcendental Passed0.14 sec Start 17: qa_copy 17/176 Test #17: qa_copy .. Passed0.13 sec Start 18: qa_vco 18/176 Test #18: qa_vco ... Passed0.1
Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
On Tue, Aug 20, 2013 at 9:05 AM, Damon wrote: >> On Mon, Aug 19, 2013 at 8:29 AM, Damon wrote: >>> >>> Hi all, >>> >>> I tried installing GNUradio v3.7.1git. The build completed, but several >>> of >>> the build tests fail. >>> >>> The OS is Ubuntu 12.04 32bit, with kernel version Linux >>> 3.2.0-51-generic-pae. CPU is Intel® Core™ i7-3770 CPU @ 3.40GHz × 8 . >>> >>> The prerequisites were built by : >>> apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig g++ \ >>> automake autoconf libtool python-dev libfftw3-dev \ >>> libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev fort77 \ >>> libsdl1.2-dev python-wxgtk2.8 git-core \ >>> libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ >>> python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \ >>> libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 \ >>> cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf >>> r-base-dev >>> python-tk \ >>> liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 >>> >>> then I ran cmake, make and make test. >>> The following tests FAILED: >>>1 - qa_volk_test_all (Failed) >>> 85 - qa_freq_xlating_fir_filter (Failed) >>> 93 - qa_fir_filter (Failed) >>> 167 - qa_codec2_vocoder (Failed) >>> So I ran: >>> ctest --output-on-failure -O ctest_log_file >>> Attached please find the log file. >>> >>> How to fix it? >>> >>> Best regards, >>> Damon >> >> Damon, >> >> Thanks for the detailed report. Can you try uninstalling ORC and >> rebuilding without it? It looks like those errors might be related to >> differences in precision/rounding with ORC. >> >> And ignore the codec2 problem, unless you specifically want to use >> codec2. It's a known problem, but we don't have a fix for it, yet. >> > > Hi Tom, > > There are 2 orc installed: liborc-0.4-0 and liborc-0.4-dev. > I uninstalled liborc-0.4-dev, rebuilt gnuradio. The volk passed > test. But several tests failed: > > 85 - qa_freq_xlating_fir_filter (Failed) > 93 - qa_fir_filter (Failed) > 167 - qa_codec2_vocoder (Failed) > Attached please find the log file: ctest_log_file. > > In my another computer, I uninstalled both liborc-0.4-0 and liborc-0.4-dev. > Then I rebuilt uhd and gnuradio v3.7.0. Three tests mentioned above failed > too. > Attached please find the log file: ctest_log_file2. > > Any suggestions? > > Thanks, > Damon > So again, let's not worry about the codec2 failure; that's something different. The two filter failures are probably related to the same issue since one uses the other. Can you try running volk_profile to make sure you Volk config file is created correctly? Then rerun those filter tests. -- Tom Visit us at GRCon13 Oct. 1 - 4 http://www.trondeau.com/grcon13 ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
On Mon, Aug 19, 2013 at 8:29 AM, Damon wrote: Hi all, I tried installing GNUradio v3.7.1git. The build completed, but several of the build tests fail. The OS is Ubuntu 12.04 32bit, with kernel version Linux 3.2.0-51-generic-pae. CPU is Intel® Core™ i7-3770 CPU @ 3.40GHz × 8 . The prerequisites were built by : apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig g++ \ automake autoconf libtool python-dev libfftw3-dev \ libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev fort77 \ libsdl1.2-dev python-wxgtk2.8 git-core \ libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \ libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 \ cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf r-base-dev python-tk \ liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 then I ran cmake, make and make test. The following tests FAILED: 1 - qa_volk_test_all (Failed) 85 - qa_freq_xlating_fir_filter (Failed) 93 - qa_fir_filter (Failed) 167 - qa_codec2_vocoder (Failed) So I ran: ctest --output-on-failure -O ctest_log_file Attached please find the log file. How to fix it? Best regards, Damon Damon, Thanks for the detailed report. Can you try uninstalling ORC and rebuilding without it? It looks like those errors might be related to differences in precision/rounding with ORC. And ignore the codec2 problem, unless you specifically want to use codec2. It's a known problem, but we don't have a fix for it, yet. Hi Tom, There are 2 orc installed: liborc-0.4-0 and liborc-0.4-dev. I uninstalled liborc-0.4-dev, rebuilt gnuradio. The volk passed test. But several tests failed: 85 - qa_freq_xlating_fir_filter (Failed) 93 - qa_fir_filter (Failed) 167 - qa_codec2_vocoder (Failed) Attached please find the log file: ctest_log_file. In my another computer, I uninstalled both liborc-0.4-0 and liborc-0.4-dev. Then I rebuilt uhd and gnuradio v3.7.0. Three tests mentioned above failed too. Attached please find the log file: ctest_log_file2. Any suggestions? Thanks, Damon [HANDLER_OUTPUT] Test project /root/gnuradio/build Start 1: qa_volk_test_all 1/176 Test #1: qa_volk_test_all . Passed0.76 sec Start 2: gr-runtime-test 2/176 Test #2: gr-runtime-test .. Passed3.07 sec Start 3: gr-pmt-test 3/176 Test #3: gr-pmt-test .. Passed1.02 sec Start 4: qa_feval 4/176 Test #4: qa_feval . Passed0.81 sec Start 5: qa_kludged_imports 5/176 Test #5: qa_kludged_imports ... Passed0.09 sec Start 6: qa_tag_utils 6/176 Test #6: qa_tag_utils . Passed0.09 sec Start 7: qa_pmt_to_python 7/176 Test #7: qa_pmt_to_python . Passed0.07 sec Start 8: qa_pmt 8/176 Test #8: qa_pmt ... Passed0.08 sec Start 9: test_gr_blocks 9/176 Test #9: test_gr_blocks ... Passed0.48 sec Start 10: qa_file_metadata 10/176 Test #10: qa_file_metadata . Passed0.22 sec Start 11: qa_moving_average 11/176 Test #11: qa_moving_average Passed0.22 sec Start 12: qa_sample_and_hold 12/176 Test #12: qa_sample_and_hold ... Passed0.13 sec Start 13: qa_skiphead 13/176 Test #13: qa_skiphead .. Passed0.28 sec Start 14: qa_keep_m_in_n 14/176 Test #14: qa_keep_m_in_n ... Passed0.14 sec Start 15: qa_vector_map 15/176 Test #15: qa_vector_map Passed0.14 sec Start 16: qa_transcendental 16/176 Test #16: qa_transcendental Passed0.14 sec Start 17: qa_copy 17/176 Test #17: qa_copy .. Passed0.15 sec Start 18: qa_vco 18/176 Test #18: qa_vco ... Passed0.14 sec Start 19: qa_interleave 19/176 Test #19: qa_interleave Passed0.13 sec Start 20: qa_add_mult_v 20/176 Test #20: qa_add_mult_v Passed0.29 sec Start 21: qa_packed_to_unpacked 21/176 Test #21: qa_packed_to_unpacked Passed0.20 sec Start 22: qa_burst_tagger 22/176 Test #22: qa_burst_tagger .. Passed0.13 sec Start 23: qa_multiply_conjugate 23/176 Test #23: qa_multiply_conjugate Passed0.13 sec Start 24: qa_max 24/176 Test #24: qa_max ... Passed0.14 sec Start 25: qa_file_source_sink 25/176 Test #25: qa_file_source_sink .. Passed0.29 sec Start 26: qa_keep_one_in_n 26/176 Test #26: qa_keep_one_in_n
Re: [Discuss-gnuradio] Make tests failed when Building for version 3.7.1git
On Mon, Aug 19, 2013 at 8:29 AM, Damon wrote: > Hi all, > > I tried installing GNUradio v3.7.1git. The build completed, but several of > the build tests fail. > > The OS is Ubuntu 12.04 32bit, with kernel version Linux > 3.2.0-51-generic-pae. CPU is Intel® Core™ i7-3770 CPU @ 3.40GHz × 8 . > > The prerequisites were built by : > apt-get install libfontconfig1-dev libxrender-dev libpulse-dev swig g++ \ > automake autoconf libtool python-dev libfftw3-dev \ > libcppunit-dev libboost1.48-all-dev libusb-dev libusb-1.0-0-dev fort77 \ > libsdl1.2-dev python-wxgtk2.8 git-core \ > libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ > python-cheetah python-lxml doxygen qt4-dev-tools libusb-1.0-0-dev \ > libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 \ > cmake git-core wget libxi-dev python-docutils gtk2-engines-pixbuf r-base-dev > python-tk \ > liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 > > then I ran cmake, make and make test. > The following tests FAILED: > 1 - qa_volk_test_all (Failed) > 85 - qa_freq_xlating_fir_filter (Failed) > 93 - qa_fir_filter (Failed) > 167 - qa_codec2_vocoder (Failed) > So I ran: > ctest --output-on-failure -O ctest_log_file > Attached please find the log file. > > How to fix it? > > Best regards, > Damon Damon, Thanks for the detailed report. Can you try uninstalling ORC and rebuilding without it? It looks like those errors might be related to differences in precision/rounding with ORC. And ignore the codec2 problem, unless you specifically want to use codec2. It's a known problem, but we don't have a fix for it, yet. -- Tom Visit us at GRCon13 Oct. 1 - 4 http://www.trondeau.com/grcon13 ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio