RE: [drakelist] Needed Crystal cover for R-4C

[n7ioh]

n7ioh <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
I have already checked with them.  I don't think the
Sherwood ones have the numbers on the cover and I was
hoping I could find an original.  If I am unable to
locate an original I will get one from Sherwood.  

 Al, N7IOH

--- Lanny Rathert <[EMAIL PROTECTED]> wrote:

> Can be purchased from Sherwood .check out WB4HFN's
> website.
> Lanny   N0JZ
> 
> 
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of n7ioh
> Sent: Tuesday, June 06, 2006 8:08 PM
> Subject: [drakelist] Needed Crystal cover for R-4C
> 
> 
> 
> n7ioh <[EMAIL PROTECTED]> made an utterance to
> the drakelist gang
>
--
> I am in need of the cover that goes over the
> crystals
> on the R-4C.  If anyone has an extra cover they can
> part with please contact me off list.  
> 
> Thanks, Al, n7ioh
>
--
> Submissions:drakelist@www.zerobeat.net
> Unsubscribe:[EMAIL PROTECTED] -
> unsubscribe drakelist in
> body
> Hopelessly Lost:[EMAIL PROTECTED] -
> help in body of message
> Zerobeat Web Page:  www.zerobeat.net - sponsored by
> www.tlchost.net
>
--
> 
> 

--
Submissions:drakelist@www.zerobeat.net
Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:[EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
--

[drakelist] Needed Crystal cover for R-4C

[n7ioh]

n7ioh <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
I am in need of the cover that goes over the crystals
on the R-4C.  If anyone has an extra cover they can
part with please contact me off list.  

Thanks, Al, n7ioh
--
Submissions:drakelist@www.zerobeat.net
Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:[EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
--

Re: [drakelist] AC-4 measured voltages

[n7ioh]

n7ioh <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
   Thanks guys for verifying the voltages are within
the acceptable range.

 Al, n7ioh 
--
Submissions:drakelist@www.zerobeat.net
Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:[EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
--

Re: [drakelist] AC-4 measured voltages

[Garey Barrell]

Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Al -

Sounds good for an unloaded supply.

73, Garey - K4OAH
Atlanta

Drake B & C-Line Service CDs




n7ioh wrote:

n7ioh <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Hi all, I just installed my 120-240 VAC switch in my
AC-4 and replaced R3 with a 100 ohm 10 watt resistor
(was burnt).  I wanted to be sure I did not have any
problems so I checked the voltages to be sure.  I
think all is OK but thought it wiser to ask those of
you with more experience then me if all is well.  I
just finished checking the voltages as described by
Mark Gilger WB0IQK in his AC-4 Trouble Shooting
article.  I did the test as he described but was
wondering if my voltages are close enough or typical
of a no load voltage readings at the AC-4 plug.  My
input voltage is 120VAC, the +650VDC reading is
715VDC, the +250VDC reading is 292VDC, my bias
adjusted fine and my filament voltage was 13.86VAC.  


   Thanks, Al, n7ioh

  

--
Submissions:drakelist@www.zerobeat.net
Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:[EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
--