[drakelist] L4B Plate tuning red pointer
Hi Evan: Sorry I took so long to answer. On both of my amps, per the manual, I loaded up the amp at 21.225 and held the knob and rotated the pointer to 15 meters. than I loaded up at 7.225 and the plate knob pointer on both amps was to the left of the thick 40 meter rectangle, about half way between the 80 and 40 setting. Too bad I can't draw a picture. What do you think? Where is the pointer on your amp? 73's Al kc9ys.
[drakelist] L4B Plate tuning red pointer
Hi Evan: Sorry I took so long to answer. On both of my amps, per the manual, I loaded up the amp at 21.225 and held the knob and rotated the pointer to 15 meters. than I loaded up at 7.225 and the plate knob pointer on both amps was to the left of the thick 40 meter rectangle, about half way between the 80 and 40 setting. Too bad I can't draw a picture. What do you think? Where is the pointer on your amp? 73's Al kc9ys.
Re: [drakelist] 2008 Hamvention Drake Forum
Evan: Sounds great! Hopefully, I'll be able to attend my first hamvention. I plan on bringing some new B line main tuning knobs as well. 73's Alan. [EMAIL PROTECTED] wrote: Fellow Drake Enthusiasts, Listed below is the agenda for this year's Drake Forum. Friday, May 16, Room 2, 230-345. Introduction. Resources for Drake Enthusiasts. Keep Your Cool: Cooling Options for Drake Equipment. Drake Roofing Filters-Ahead of Their Time by Rob Sherwood NC0C. Ask the Experts-Question and Answer Session, Mark WB0IQK, Gary W8PU, and Jeff WA8SAJ. Wrap-up and Close. I'd like to invite you to attend this forum and enjoy the presentations tailored specifically to you, the Drake community. And if you have any questions, comments, ideas, opinions, etc., the Drake Forum Team would like to hear from you. Enjoy the Forum, enjoy the Hamvention, and enjoy Drake equipment! 73, Evan, K9SQG - Get the MapQuest Toolbar, Maps, Traffic, Directions & More!
[drakelist] Still looking for a few 7-line items
[EMAIL PROTECTED] made an utterance to the drakelist gang -- Thanks to all list members who have responded thus far. I'm still after the following: MS7 WH7 DL1000 7077 Mic SL300/SL1000/SL1800 filters Reply off-list. Thanks! Fred, N8YX -- Submissions:[EMAIL PROTECTED] Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost:[EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net --
Re: [drakelist] DRAKE R-4C (4-NB Noise Blanker)
Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang -- Steve - I assume you have the shorting plug in the MUTE jack? :-) First lift up slightly on the Calibrator board. Sometimes the leads are left too long on the bottom of the board and short out to the chassis if it's pushed all the way down. There are fully annotated photos of the NB-4 on my C-Line CD, but Drake didn't provide any description or voltage information. I have a scan of the 34-PNB Noise Blanker on my TR-4 CDs, which are essentially the same circuit, and it has a circuit description included. That CD also has a separate set of photo's with voltage measurements for the 34-PNB. If you want the C-Line CD, I could include a copy of the 34-PNB manual and docs on it as well. 73, Garey - K4OAH Glen Allen, VA Drake 2-B, B & C-Line and TR-4/C Service Supplement CDs STEVE SCOGGINS wrote: STEVE SCOGGINS <[EMAIL PROTECTED]> made an utterance to the drakelist gang -- I have a Drake R-4C receiver with the 4-NB noise blanker that is not working. I have the 4-NB manual with schematic from the bama website. There is no receiver audio when switched to NB position. Using a scope I can see that the 7.935 Mhz oscillator in the NB is oscillating. Perhaps the FETs are blown in the NB. Does any one have a parts layout and theory of operation for this NB. This type of info. would be useful for troubleshooting. 73 Steve KE7RR -- Submissions:[EMAIL PROTECTED] Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost:[EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net --
[drakelist] DRAKE R-4C (4-NB Noise Blanker)
STEVE SCOGGINS <[EMAIL PROTECTED]> made an utterance to the drakelist gang -- I have a Drake R-4C receiver with the 4-NB noise blanker that is not working. I have the 4-NB manual with schematic from the bama website. There is no receiver audio when switched to NB position. Using a scope I can see that the 7.935 Mhz oscillator in the NB is oscillating. Perhaps the FETs are blown in the NB. Does any one have a parts layout and theory of operation for this NB. This type of info. would be useful for troubleshooting. 73 Steve KE7RR Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ -- Submissions:[EMAIL PROTECTED] Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost:[EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net --
Re: [drakelist] 2008 Hamvention Drake Forum
The agenda looks great! I am looking forward to it. Terry, W8NJR In a message dated 4/14/2008 10:23:04 A.M. Eastern Daylight Time, [EMAIL PROTECTED] writes: Fellow Drake Enthusiasts, Listed below is the agenda for this year's Drake Forum. Friday, May 16, Room 2, 230-345. Introduction. Resources for Drake Enthusiasts. Keep Your Cool: Cooling Options for Drake Equipment. Drake Roofing Filters-Ahead of Their Time by Rob Sherwood NC0C. Ask the Experts-Question and Answer Session, Mark WB0IQK, Gary W8PU, and Jeff WA8SAJ. Wrap-up and Close. I'd like to invite you to attend this forum and enjoy the presentations tailored specifically to you, the Drake community. And if you have any questions, comments, ideas, opinions, etc., the Drake Forum Team would like to hear from you. Enjoy the Forum, enjoy the Hamvention, and enjoy Drake equipment! 73, Evan, K9SQG Get the _MapQuest Toolbar_ (http://www.mapquest.com/toolbar?NCID=mpqmap000303) , Maps, Traffic, Directions & More! **It's Tax Time! Get tips, forms and advice on AOL Money & Finance. (http://money.aol.com/tax?NCID=aolcmp0030002850)
[drakelist] 2008 Hamvention Drake Forum
Fellow Drake Enthusiasts, Listed below is the agenda for this year's Drake Forum. Friday, May 16, Room 2, 230-345. Introduction. Resources for Drake Enthusiasts. Keep Your Cool:? Cooling Options for Drake Equipment. Drake Roofing Filters-Ahead of Their Time by Rob Sherwood NC0C. Ask the Experts-Question and Answer Session, Mark WB0IQK, Gary W8PU, and Jeff WA8SAJ. Wrap-up and Close. I'd like to invite you to attend this forum and enjoy the presentations tailored specifically to you, the Drake community.? And if you have any questions, comments, ideas, opinions, etc., the Drake Forum Team would like to hear from you.? Enjoy the Forum, enjoy the Hamvention, and enjoy Drake equipment! 73, Evan, K9SQG