Re: [Drakelist] TR7 refurb

2011-03-23 Thread Jim Shorney
On Wed, 23 Mar 2011 09:34:47 -0400 (EDT), RANDALL & EVELYN  PAYNE wrote:

>microphones 

http://www.mail-archive.com/search?q=microphone&l=drakelist%40zerobeat.net





--
Ham Radio NU0C
Lincoln, Nebraska, U.S.S.A.
TR7/RV7/R7A/L7, TR6/RV6, T4XC/R4C/L4B, NCL2000, SB104A, R390A, GT550A/RV550A, 
HyGain 3750, IBM PS/2 - all vintage, all the time!

"Give a man a URL, and he will learn for an hour; teach him to Google, and he 
will learn for a lifetime."

HyGain 3750 User's Group - http://groups.yahoo.com/group/HyGain_3750/
http://incolor.inetnebr.com/jshorney
http://www.nebraskaghosts.org



___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] R4C HYBRID

2011-03-23 Thread TIM TOMLJANOVICH

MY R4C HYBRID  #27948 HAS LOST ABOUT 20DB OF SIGNAL STRENGTH. IT SEEMS TO HEAR 
OK BUT THE S METER 
SHOWS ~20DB LOWER ALL THE TIME.  IT HAS 4 SOLID STATE TUBE REPLACEMENTS  FOR 
6EJ6 TUBES.
I HAVE SWAPPED THE TUBE REPLACEMENTS AROUND A FEW TIMES WITH NO CHANGE IN 
SIGNAL STRENGTH.
IS THEIR A WAY TO CHECK THESE SOLID STATE REPLACEMENTS?
CAN I REPLACE THE SOLID STATE TUBES  WITH REGULAR TUBES?
ANY SUGGESTIONS ON WHAT ELSE WILL CAUSE A 20BD LOSS OF SIGNAL STRENGTH?
 
TIM K9SB
 
  ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] F S R-4B Instruction Manual shipped $20 SOLD

2011-03-23 Thread Douglasnyman
The R-4B  Instruction Manual has been  SOLD.  Regards to the group.  Doug
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] F S R-4C New Old Stock top and bottom covers. $60. shipped lower 48

2011-03-23 Thread Douglasnyman
I have for sale New Old Stock top and bottom  covers for the R-4C. Top 
#480-9120A. Bottom #480-9140D. There is a slight  scratch and paint fading on 
the R/H side of the top cover. Feet included with  bottom cover. Never 
installed. Paint around all screw holes are untouched.  Pictures available. 
$60.00 
shipped lower 48. Personal Check or Money Order.  No Pay Pal.  Regards to 
the group.  Doug in St Paul,  MN 
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] Last few Drake items

2011-03-23 Thread tross
This is all that's left

FF-1 Fixed Frequency Adapter. average condition, as is.  45.00.  8.00 flat rate 
shipping

1-MS-4  45.00 can ship Flat Rate for 15.00

1-AC-4  75.00 can ship flat rate for 15.00 


73
Terry
W2TGR
WWW.3955.US___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] F S R-4B Instruction Manual $20.00 shipped lower 48

2011-03-23 Thread Douglasnyman
I have for sale an original R-4B Instruction  Manual in Good to Very Good 
condition. All pages present. A few pencil  marks. $20.00 shipped lower 48. 
Personal Check or Money Order. No Pay Pal.  Picture available.  Regards to 
the group.  Doug in St,  MN
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] TR7 refurb

2011-03-23 Thread LeeCraner
Randy,
 
If the "sticky paint" is the problem, give Claudio's (I4YHH) solution a  
try:
 
_http://www.wb4hfn.com/DRAKE/DrakeArticles/StickPaintFix.htm_ 
(http://www.wb4hfn.com/DRAKE/DrakeArticles/StickPaintFix.htm) 
 
It does actually work!
 
73
Lee WB6SSW
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] TR7 refurb

2011-03-23 Thread Don Cunningham
Randy,
I hope someone will chime in on the paint, but Mike March, K4QU,makes the 
plastic end caps FAR cheaper than I have seen them on Ebay.  He has three 
sizes, as I remember, to cover the TR7, accessories and the L7 amps.  Email him 
at mikek...@gmail.com .  No connection other than a VERY satisfied customer.  
Google March Magnetic Paddles and see some of his handywork!!
73,
Don, WB5HAKI ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] t4x cw problem

2011-03-23 Thread Garey Barrell

Bill -

Yes, a dried out (high ESR) electrolytic at C132 allows the SIDETONE 
from V9a AROUND the D8 keyer diode, and send it on to V11 via the B+ bus.


Nice when they're easy!  :-)

73, Garey - K4OAH
Glen Allen, VA

Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs



Bill Hendrickson wrote:


Garey...I think it was you who said c132 was giving me a sidetone 
problem on my t4you were right...replaced it and no more errant 
sidetone

73
Bill




___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] xtals SPR4

2011-03-23 Thread w6icm

WTB crystals for the SPR 4 Receiver.

Need  the Ham bands  crystals.

Please contact me directly:   w6icm   at4fast   dotnet.

73

Ozzie, w6icm





___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] t4x cw problem

2011-03-23 Thread Bill Hendrickson
Garey...I think it was you who said c132 was giving me a sidetone problem on
my t4you were right...replaced it and no more errant sidetone
73
Bill

sent via samsung android..
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] End of the Drake's UPDATE

2011-03-23 Thread tross

Spoken for, Thanks Kris KM2KM.  TR4C Chassis. No tubes, No front panel, no 
metal. otherwise complete. Was a working rig. 75.00  OBO. Have a mixed set top 
and bottom covers. Top needs to be repainted, bottom has been repainted. Looks 
extremely close to factory.
Also have a pretty decent front panel. Add 25 Bucks for the Metal and panel.

FF-1 Fixed Frequency Adapter. average condition, as is.  45.00 OBO

Spoken for. Thanks Ron. WB1HGA1- TR4 Very close to collectors quality. 
Comes with speaker, power supply and Ext. VFO.
Fully tested and is fully operational. Tubes tested, controls cleaned etc. NICE 
radio

1-TR-4 working but will need to be cleaned (controls etc). Tubes should be 
tested and may need alignment. This has speaker and power supply. Only thing 
tested was operation. It is working. Has newly redone top cover. 6 coats of 
Lacquer and the splatter finish.Sharp...
 200.00 OBO

1-TR4C NICE radio, tubes have been tested and bad ones replaced. Controls 
cleaned with De-oxit, should be aligned. Has speaker and power supply. The 
metal on this rig is close to perfect. 300.00 OBO

Spoken for. Thanks  John, KB9PBM1- Stock C-Line with power supply and 
speaker. This is a working station. Could use the usual cleaning ext. Station 
shows well and works the same.

Make me an offer on one or all.cash, trade dicker whatever.
After re-doing 12 or so of these stations I decided I don't need any more 
projects, so they gotta go.
Everything plus shipping.

73
Terry
W2TGR
WWW.3955.US___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] TR7 refurb

2011-03-23 Thread RANDALL & EVELYN PAYNE


Greetings to all, 

I just purchased a TR7 that needs some TLC.  Need recommendations on paint for 
the cabinet, source for plastic end caps (watching some on Ebay currently), 
microphones (yes, I realize a lot of personal preference is involved here).  
Wondering if anyone has adapted a computer/cell phone headset to the TR7? 

Thanks for the help.  Looking forward to getting this on the air. 

73, 

Randy K4EZM 


___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] L4B Question

2011-03-23 Thread Dino Papas
Woody - Well, it's been 32 years since I did the 10m mod on my new L-4B but as 
I recall you should be able to simply replace the LP filter with a straight 
piece of coax (can't help with the 10m input coil/cap procurement).  Once 
that's done you should have no problem putting the Soft-Start PCB in placeI 
just did it a couple of weeks ago.  Contrary to the instructions my amp 
actually had the terminal strip oriented such that I didn't have to move it...I 
THINK it was built that way to accommodate the LP filter box and thus no moving 
required.

Am sure one of the guys will chime in with info about the input components.  If 
you look at the front panel you'll probably see that there's a small spot of 
gray paint in the place where the "10" should be on the plate tuning and band 
switch.  Back in the day I took an eraser and gently removed that paint to 
reveal the numeralsYMMV.

Good luck!

73 - Dino KL0S

On Mar232011, at 0855 AM, Woody wrote:

> Hello, as you will be able to tell I'm not a tech, just a broke down Old 
> Vietnam Vet who loves Drakes and am lucky enough to have a good collection.
> My question is I am in the process of redoing a L4B, using the Harbach Mods, 
> soft start, soft key and power supply kit. I am having problems finding a 
> place to mount the soft start, there is a alu. box mounted under the bottom, 
> this is where the soft start needs too mount, can I remove this without any 
> problems? I was told it was a low pass filter,And also where can I get the 10 
> mtr tuned input so that it could be used on 10 if I ever wanted to? It 
> doesn't have the tuned input for 10, and the band sw has blue dots in that 
> position. Sorry for being so dumb.
> Thanks
> Woody (KO4BG)
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] L4B Question

2011-03-23 Thread Tom Delano
Hi Woody,

I added a Harbach Soft Start board to my L-4B about a year ago and I mounted
it exactly where the soft start instructions suggested and it works very
well. You will need to adjust slightly the binding post where the small
electrolytic cap is mounted, but that is all.

Good luck with your project and it is a very worthwhile mod to make.

73,

Tom, W1CC

On Wed, Mar 23, 2011 at 8:55 AM, Woody  wrote:

> *Hello, as you will be able to tell I'm not a tech, just a broke down Old
> Vietnam Vet who loves Drakes and am lucky enough to have a good collection.
> *
> *My question is I am in the process of redoing a L4B, using the Harbach
> Mods, soft start, soft key and power supply kit. I am having problems
> finding a place to mount the soft start, there is a alu. box mounted under
> the bottom, this is where the soft start needs too mount, can I remove this
> without any problems? I was told it was a low pass filter,And also where can
> I get the 10 mtr tuned input so that it could be used on 10 if I ever wanted
> to? It doesn't have the tuned input for 10, and the band sw has blue dots in
> that position. Sorry for being so dumb.*
> *Thanks*
> *Woody (KO4BG)*
>
> ___
> Drakelist mailing list
> Drakelist@zerobeat.net
> http://mailman.zerobeat.net/mailman/listinfo/drakelist
>
>


-- 
Please note the new email address: tom.del...@gmail.com
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


[Drakelist] L4B Question

2011-03-23 Thread Woody
*Hello, as you will be able to tell I'm not a tech, just a broke down Old
Vietnam Vet who loves Drakes and am lucky enough to have a good collection.*
*My question is I am in the process of redoing a L4B, using the Harbach
Mods, soft start, soft key and power supply kit. I am having problems
finding a place to mount the soft start, there is a alu. box mounted under
the bottom, this is where the soft start needs too mount, can I remove this
without any problems? I was told it was a low pass filter,And also where can
I get the 10 mtr tuned input so that it could be used on 10 if I ever wanted
to? It doesn't have the tuned input for 10, and the band sw has blue dots in
that position. Sorry for being so dumb.*
*Thanks*
*Woody (KO4BG)*
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist