Re: [Drakelist] Drakelist Digest,Drake B line Twins No output

2012-01-01 Thread FJMelick
Well, the earlier problem with the spot frequency function  not working has 
lead to no output at all from the transmitter. It shows idle  current only 
when you go to tune or hold the PTT on the mic. 
 
Any ideas where to start. Tubes or power supply?  Power supply rebuilt 3 or 
4 years ago .After rebuilt it always had a 60  cycle hum on 40 meters. You 
could feel the cabinet vibrating. 

Thanks 
 
73 de Fred WD8ADG ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] Drakelist Digest,Drake B line Twins No output

2012-01-02 Thread Ron
Fred,
>From previous threads, I suspicion not, but.
In tune, does drive cause current to increase? Or in PTT, drive and whistle 
increase current?   If so, look at the relay contacts.  

73,
Ron WD8SBB

--- On Sun, 1/1/12, fjmel...@aol.com  wrote:

From: fjmel...@aol.com 
Subject: Re: [Drakelist] Drakelist Digest,Drake B line Twins No output
To: drakelist@zerobeat.net
Date: Sunday, January 1, 2012, 11:52 PM



 

Well, the earlier problem with the spot frequency function 
not working has lead to no output at all from the transmitter. It shows idle 
current only when you go to tune or hold the PTT on the mic. 
 
Any ideas where to start. Tubes or power supply? 
 Power supply rebuilt 3 or 4 years ago .After rebuilt it always had a 60 
cycle hum on 40 meters. You could feel the cabinet vibrating. 

Thanks 
 
73 de Fred WD8ADG 
-Inline Attachment Follows-

___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] Drakelist Digest,Drake B line Twins No output

2012-01-02 Thread Garey Barrell

Fred -

All bands??

NOT a power supply problem.

IF you key the transmitter can you hear it in a nearby receiver where it 
'should' be?

If you're set up for transceive with the R-4B, does it work in TRANSCEIVE under 
RCVR control?

The power supply hum may be the result of transmitter bolts loosening.  Some hum is normal, would 
NOT be related to a particular band(s).


73, Garey - K4OAH
Glen Allen, VA

Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs



fjmel...@aol.com wrote:
/Well, the earlier problem with the spot frequency function not working has lead to no output at 
all from the transmitter. It shows idle current only when you go to tune or hold the PTT on the mic. /

//
/Any ideas where to start. Tubes or power supply?  Power supply rebuilt 3 or 4 years ago .After 
rebuilt it always had a 60 cycle hum on 40 meters. You could feel the cabinet vibrating. /

//
/Thanks /
//
/73 de Fred WD8ADG /


___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist