[v7 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845
Add interconnect properties such as interconnect provider specifier , the edge source and destination ports which are required by the interconnect API to configure interconnect path for MDSS. Changes in v2: - None Changes in v3: - Remove common property definitions (Rob Herring) Changes in v4: - Use port macros and change port string names (Georgi Djakov) Changes in v5-v7: - None Signed-off-by: Sravanthi Kollukuduru Signed-off-by: Jayant Shekhar --- Documentation/devicetree/bindings/display/msm/dpu.txt | 10 ++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index ad2e883..a61dd40 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -28,6 +28,11 @@ Required properties: - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. +- interconnects : interconnect path specifier for MDSS according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be + 2 paths corresponding to 2 AXI ports. +- interconnect-names : MDSS will have 2 port names to differentiate between the + 2 interconnect paths defined with interconnect specifier. Optional properties: - assigned-clocks: list of clock specifiers for clocks needing rate assignment @@ -86,6 +91,11 @@ Example: interrupt-controller; #interrupt-cells = <1>; + interconnects = <_hlos MASTER_MDP0 _hlos SLAVE_EBI1>, + <_hlos MASTER_MDP1 _hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <_iommu 0>; #address-cells = <2>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v7 2/3] drm/msm/dpu: Integrate interconnect API in MDSS
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)
Changes in v6:
- Change to new icc_set API's (Doug Anderson)
Changes in v7:
- Fixed a typo
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
index 38576f8..38daf8a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -4,11 +4,15 @@
*/
#include "dpu_kms.h"
+#include
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
#define HW_INTR_STATUS 0x0010
+/* Max BW defined in KBps */
+#define MAX_BW 680
+
struct dpu_mdss {
struct msm_mdss base;
void __iomem *mmio;
@@ -16,8 +20,30 @@ struct dpu_mdss {
u32 hwversion;
struct dss_module_power mp;
struct dpu_irq_controller irq_controller;
+ struct icc_path *path[2];
+ u32 num_paths;
};
+static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
+ struct dpu_mdss *dpu_mdss)
+{
+ struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ dpu_mdss->path[0] = path0;
+ dpu_mdss->num_paths = 1;
+
+ if (!IS_ERR(path1)) {
+ dpu_mdss->path[1] = path1;
+ dpu_mdss->num_paths++;
+ }
+
+ return 0;
+}
+
static irqreturn_t dpu_mdss_irq(int irq, void *arg)
{
struct dpu_mdss *dpu_mdss = arg;
@@ -127,7 +153,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
+ u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
+
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (ret)
@@ -140,12 +170,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
if (ret)
DPU_ERROR("clock disable failed, ret:%d\n", ret);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], 0, 0);
+
return ret;
}
@@ -155,6 +188,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
struct msm_drm_private *priv = dev->dev_private;
struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
struct dss_module_power *mp = _mdss->mp;
+ int i;
pm_runtime_disable(dev->dev);
_dpu_mdss_irq_domain_fini(dpu_mdss);
@@ -162,6 +196,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
msm_dss_put_clk(mp->clk_config, mp->num_clk);
devm_kfree(>dev, mp->clk_config);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_put(dpu_mdss->path[i]);
+
if (dpu_mdss->mmio)
devm_iounmap(>dev, dpu_mdss->mmio);
dpu_mdss->mmio = NULL;
@@ -200,6 +237,10 @@ int dpu_mdss_init(struct drm_device *dev)
}
dpu_mdss->mmio_len = resource_size(res);
+ ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
+ if (ret)
+ return ret;
+
mp = _mdss->mp;
ret = msm_dss_parse_clock(pdev, mp);
if (ret) {
@@ -221,14 +262,14 @@ int dpu_mdss_init(struct drm_device *dev)
goto irq_error;
}
+ priv->mdss = _mdss->base;
+
pm_runtime
[v7 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling
Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.
Changes in v2:
- Fixed build error due to partial clean up
Changes in v3:
- Condense multiple lines into a single line (Sean Paul)
Changes in v4-v7:
- None
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c| 174 +--
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h| 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 -
drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h| 22 +--
6 files changed, 89 insertions(+), 239 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 22e84b3..c75536e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -84,7 +84,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
struct dpu_core_perf_params *perf)
{
struct dpu_crtc_state *dpu_cstate;
- int i;
if (!kms || !kms->catalog || !crtc || !state || !perf) {
DPU_ERROR("invalid parameters\n");
@@ -95,35 +94,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
+ perf->bw_ctl = kms->catalog->perf.max_bw_high *
1000ULL;
- perf->max_per_pipe_ib[i] = perf->bw_ctl[i];
- }
+ perf->max_per_pipe_ib = perf->bw_ctl;
perf->core_clk_rate = kms->perf.max_core_clk_rate;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = 0;
- perf->max_per_pipe_ib[i] = 0;
- }
+ perf->bw_ctl = 0;
+ perf->max_per_pipe_ib = 0;
perf->core_clk_rate = 0;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->perf.fix_core_ab_vote;
- perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote;
- }
+ perf->bw_ctl = kms->perf.fix_core_ab_vote;
+ perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
perf->core_clk_rate = kms->perf.fix_core_clk_rate;
}
DPU_DEBUG(
- "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu
llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n",
+ "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
crtc->base.id, perf->core_clk_rate,
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]);
+ perf->max_per_pipe_ib, perf->bw_ctl);
}
int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
@@ -136,7 +124,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
struct dpu_crtc_state *dpu_cstate;
struct drm_crtc *tmp_crtc;
struct dpu_kms *kms;
- int i;
if (!crtc || !state) {
DPU_ERROR("invalid crtc\n");
@@ -158,31 +145,25 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
/* obtain new values */
_dpu_core_perf_calc_crtc(kms, crtc, state, _cstate->new_perf);
- for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
- i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i];
- curr_client_type = dpu_crtc_get_client_type(crtc);
+ bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
+ curr_client_type = dpu_crtc_get_client_type(crtc);
- drm_for_each_crtc(tmp_crtc, crtc->dev) {
- if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
- (dpu_crtc_get_client_type(tmp_crtc) ==
- c
[v7 0/3] Use interconnect API in MDSS on SDM845
The interconnect API provides an interface for consumer drivers to express their bandwidth needs in the SoC. This data is aggregated and the on-chip interconnect hardware is configured to the appropriate power/performance profile. MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirements for the given interconnected path. Subsequently, there is a clean up patch to remove all the references of the DPU custom bus scaling. There is corresponding DT patch with the source and destination ports defined for display driver which will be sent separately. Changes in v2: - Remove error log and unnecessary check (Jordan Crouse) - Fixed build error due to partial clean up Changes in v3: - Remove common property definitions (Rob Herring) - Code clean up involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke) - Condense multiple lines into a single line (Sean Paul) Changes in v4: - Add comments, spacings, tabs, proper port name and icc macro - Use port macros and change port string names (Georgi Djakov) Changes in v5: - Updated commit text and parenthesis alignment (Georgi Djakov) Changes in v6: - Change icc_set to icc_set_bw (Doug Anderson) Changes in v7: - Fixed a typo Jayant Shekhar (3): drm/msm/dpu: clean up references of DPU custom bus scaling drm/msm/dpu: Integrate interconnect API in MDSS dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845 .../devicetree/bindings/display/msm/dpu.txt| 10 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 174 - drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +- drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 22 +-- 8 files changed, 144 insertions(+), 243 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v1] drm/msm: Remove clock and bandwidth votes in mdss pm suspend
MDSS PM suspend is dependent on runtime suspend for disabling
clocks and removing bandwidth votes. In case of pm_suspend
triggered, dpm_prepare hold a refcount on power usage of device
and hence runtime suspend is never triggered during pm_suspend.
As runtime suspend is not triggered, clocks and bandwidth votes
remain. Hence explicitly trigger mdss disable in msm_pm_suspend
to disable clocks and remove the votes.
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/msm_drv.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 5c60bb3..ffe3a25 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1068,12 +1068,16 @@ static int msm_pm_suspend(struct device *dev)
{
struct drm_device *ddev = dev_get_drvdata(dev);
struct msm_drm_private *priv = ddev->dev_private;
+ struct msm_mdss *mdss = priv->mdss;
if (!IS_ERR_OR_NULL(priv->pm_state))
return 0;
priv->pm_state = drm_atomic_helper_suspend(ddev);
+ if (mdss && mdss->funcs)
+ mdss->funcs->disable(mdss);
+
return IS_ERR(priv->pm_state) ? PTR_ERR(priv->pm_state) : 0;
}
@@ -1081,11 +1085,15 @@ static int msm_pm_resume(struct device *dev)
{
struct drm_device *ddev = dev_get_drvdata(dev);
struct msm_drm_private *priv = ddev->dev_private;
+ struct msm_mdss *mdss = priv->mdss;
int ret;
if (IS_ERR_OR_NULL(priv->pm_state))
return 0;
+ if (mdss && mdss->funcs)
+ mdss->funcs->enable(mdss);
+
ret = drm_atomic_helper_resume(ddev, priv->pm_state);
if (ret == 0)
priv->pm_state = NULL;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v6 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845
Add interconnect properties such as interconnect provider specifier , the edge source and destination ports which are required by the interconnect API to configure interconnect path for MDSS. Changes in v2: - none Changes in v3: - Remove common property definitions (Rob Herring) Changes in v4: - Use port macros and change port string names (Georgi Djakov) Changes in v5: - None Changes in v6: - None Signed-off-by: Sravanthi Kollukuduru Signed-off-by: Jayant Shekhar --- Documentation/devicetree/bindings/display/msm/dpu.txt | 10 ++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index ad2e883..a61dd40 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -28,6 +28,11 @@ Required properties: - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. +- interconnects : interconnect path specifier for MDSS according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be + 2 paths corresponding to 2 AXI ports. +- interconnect-names : MDSS will have 2 port names to differentiate between the + 2 interconnect paths defined with interconnect specifier. Optional properties: - assigned-clocks: list of clock specifiers for clocks needing rate assignment @@ -86,6 +91,11 @@ Example: interrupt-controller; #interrupt-cells = <1>; + interconnects = <_hlos MASTER_MDP0 _hlos SLAVE_EBI1>, + <_hlos MASTER_MDP1 _hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <_iommu 0>; #address-cells = <2>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v6 2/3] drm/msm/dpu: Integrate interconnect API in MDSS
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)
Changes in v6:
- Change to new icc_set API's (Doug Anderson)
Signed-off-by: Sravanthi Kollukuduru1
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
index 38576f8..38daf8a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -4,11 +4,15 @@
*/
#include "dpu_kms.h"
+#include
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
#define HW_INTR_STATUS 0x0010
+/* Max BW defined in KBps */
+#define MAX_BW 680
+
struct dpu_mdss {
struct msm_mdss base;
void __iomem *mmio;
@@ -16,8 +20,30 @@ struct dpu_mdss {
u32 hwversion;
struct dss_module_power mp;
struct dpu_irq_controller irq_controller;
+ struct icc_path *path[2];
+ u32 num_paths;
};
+static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
+ struct dpu_mdss *dpu_mdss)
+{
+ struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ dpu_mdss->path[0] = path0;
+ dpu_mdss->num_paths = 1;
+
+ if (!IS_ERR(path1)) {
+ dpu_mdss->path[1] = path1;
+ dpu_mdss->num_paths++;
+ }
+
+ return 0;
+}
+
static irqreturn_t dpu_mdss_irq(int irq, void *arg)
{
struct dpu_mdss *dpu_mdss = arg;
@@ -127,7 +153,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
+ u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
+
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (ret)
@@ -140,12 +170,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
if (ret)
DPU_ERROR("clock disable failed, ret:%d\n", ret);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], 0, 0);
+
return ret;
}
@@ -155,6 +188,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
struct msm_drm_private *priv = dev->dev_private;
struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
struct dss_module_power *mp = _mdss->mp;
+ int i;
pm_runtime_disable(dev->dev);
_dpu_mdss_irq_domain_fini(dpu_mdss);
@@ -162,6 +196,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
msm_dss_put_clk(mp->clk_config, mp->num_clk);
devm_kfree(>dev, mp->clk_config);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_put(dpu_mdss->path[i]);
+
if (dpu_mdss->mmio)
devm_iounmap(>dev, dpu_mdss->mmio);
dpu_mdss->mmio = NULL;
@@ -200,6 +237,10 @@ int dpu_mdss_init(struct drm_device *dev)
}
dpu_mdss->mmio_len = resource_size(res);
+ ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
+ if (ret)
+ return ret;
+
mp = _mdss->mp;
ret = msm_dss_parse_clock(pdev, mp);
if (ret) {
@@ -221,14 +262,14 @@ int dpu_mdss_init(struct drm_device *dev)
goto irq_error;
}
+ priv->mdss = _mdss->base;
+
pm_runtime_enable(dev->dev);
pm_ru
[v6 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling
Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.
Changes in v2:
- Fixed build error due to partial clean up
Changes in v3:
- Condense multiple lines into a single line (Sean Paul)
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- None
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c| 174 +--
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h| 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 -
drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h| 22 +--
6 files changed, 89 insertions(+), 239 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 22e84b3..c75536e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -84,7 +84,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
struct dpu_core_perf_params *perf)
{
struct dpu_crtc_state *dpu_cstate;
- int i;
if (!kms || !kms->catalog || !crtc || !state || !perf) {
DPU_ERROR("invalid parameters\n");
@@ -95,35 +94,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
+ perf->bw_ctl = kms->catalog->perf.max_bw_high *
1000ULL;
- perf->max_per_pipe_ib[i] = perf->bw_ctl[i];
- }
+ perf->max_per_pipe_ib = perf->bw_ctl;
perf->core_clk_rate = kms->perf.max_core_clk_rate;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = 0;
- perf->max_per_pipe_ib[i] = 0;
- }
+ perf->bw_ctl = 0;
+ perf->max_per_pipe_ib = 0;
perf->core_clk_rate = 0;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->perf.fix_core_ab_vote;
- perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote;
- }
+ perf->bw_ctl = kms->perf.fix_core_ab_vote;
+ perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
perf->core_clk_rate = kms->perf.fix_core_clk_rate;
}
DPU_DEBUG(
- "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu
llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n",
+ "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
crtc->base.id, perf->core_clk_rate,
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]);
+ perf->max_per_pipe_ib, perf->bw_ctl);
}
int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
@@ -136,7 +124,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
struct dpu_crtc_state *dpu_cstate;
struct drm_crtc *tmp_crtc;
struct dpu_kms *kms;
- int i;
if (!crtc || !state) {
DPU_ERROR("invalid crtc\n");
@@ -158,31 +145,25 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
/* obtain new values */
_dpu_core_perf_calc_crtc(kms, crtc, state, _cstate->new_perf);
- for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
- i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i];
- curr_client_type = dpu_crtc_get_client_type(crtc);
+ bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
+ curr_client_type = dpu_crtc_get_client_type(crtc);
- drm_for_each_crtc(tmp_crtc, crtc->dev) {
- if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
- (dpu_crtc_get_client_typ
[v6 0/3] Use interconnect API in MDSS on SDM845
The interconnect API provides an interface for consumer drivers to express their bandwidth needs in the SoC. This data is aggregated and the on-chip interconnect hardware is configured to the appropriate power/performance profile. MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirements for the given interconnected path. Subsequently, there is a clean up patch to remove all the references of the DPU custom bus scaling. There is corresponding DT patch with the source and destination ports defined for display driver which will be sent separately. Changes in v2: - Remove error log and unnecessary check (Jordan Crouse) - Fixed build error due to partial clean up Changes in v3: - Remove common property definitions (Rob Herring) - Code clean up involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke) - Condense multiple lines into a single line (Sean Paul) Changes in v4: - Add comments, spacings, tabs, proper port name and icc macro - Use port macros and change port string names (Georgi Djakov) Changes in v5: - Updated commit text and parenthesis alignment (Georgi Djakov) Changes in v6: - Change icc_set to icc_set_bw (Doug Anderson) Jayant Shekhar (3): drm/msm/dpu: clean up references of DPU custom bus scaling drm/msm/dpu: Integrate interconnect API in MDSS dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845 .../devicetree/bindings/display/msm/dpu.txt| 10 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 174 - drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +- drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 22 +-- 8 files changed, 144 insertions(+), 243 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v6 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845
Add interconnect properties such as interconnect provider specifier , the edge source and destination ports which are required by the interconnect API to configure interconnect path for MDSS. Changes in v2: - none Changes in v3: - Remove common property definitions (Rob Herring) Changes in v4: - Use port macros and change port string names (Georgi Djakov) Changes in v5: - None Changes in v6: -None Signed-off-by: Sravanthi Kollukuduru Signed-off-by: Jayant Shekhar --- Documentation/devicetree/bindings/display/msm/dpu.txt | 10 ++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index ad2e883..a61dd40 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -28,6 +28,11 @@ Required properties: - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. +- interconnects : interconnect path specifier for MDSS according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be + 2 paths corresponding to 2 AXI ports. +- interconnect-names : MDSS will have 2 port names to differentiate between the + 2 interconnect paths defined with interconnect specifier. Optional properties: - assigned-clocks: list of clock specifiers for clocks needing rate assignment @@ -86,6 +91,11 @@ Example: interrupt-controller; #interrupt-cells = <1>; + interconnects = <_hlos MASTER_MDP0 _hlos SLAVE_EBI1>, + <_hlos MASTER_MDP1 _hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <_iommu 0>; #address-cells = <2>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v6 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling
Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.
Changes in v2:
- Fixed build error due to partial clean up
Changes in v3:
- Condense multiple lines into a single line (Sean Paul)
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
-None
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c| 174 +--
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h| 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 -
drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h| 22 +--
6 files changed, 89 insertions(+), 239 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 22e84b3..c75536e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -84,7 +84,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
struct dpu_core_perf_params *perf)
{
struct dpu_crtc_state *dpu_cstate;
- int i;
if (!kms || !kms->catalog || !crtc || !state || !perf) {
DPU_ERROR("invalid parameters\n");
@@ -95,35 +94,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
+ perf->bw_ctl = kms->catalog->perf.max_bw_high *
1000ULL;
- perf->max_per_pipe_ib[i] = perf->bw_ctl[i];
- }
+ perf->max_per_pipe_ib = perf->bw_ctl;
perf->core_clk_rate = kms->perf.max_core_clk_rate;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = 0;
- perf->max_per_pipe_ib[i] = 0;
- }
+ perf->bw_ctl = 0;
+ perf->max_per_pipe_ib = 0;
perf->core_clk_rate = 0;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->perf.fix_core_ab_vote;
- perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote;
- }
+ perf->bw_ctl = kms->perf.fix_core_ab_vote;
+ perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
perf->core_clk_rate = kms->perf.fix_core_clk_rate;
}
DPU_DEBUG(
- "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu
llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n",
+ "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
crtc->base.id, perf->core_clk_rate,
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]);
+ perf->max_per_pipe_ib, perf->bw_ctl);
}
int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
@@ -136,7 +124,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
struct dpu_crtc_state *dpu_cstate;
struct drm_crtc *tmp_crtc;
struct dpu_kms *kms;
- int i;
if (!crtc || !state) {
DPU_ERROR("invalid crtc\n");
@@ -158,31 +145,25 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
/* obtain new values */
_dpu_core_perf_calc_crtc(kms, crtc, state, _cstate->new_perf);
- for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
- i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i];
- curr_client_type = dpu_crtc_get_client_type(crtc);
+ bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
+ curr_client_type = dpu_crtc_get_client_type(crtc);
- drm_for_each_crtc(tmp_crtc, crtc->dev) {
- if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
- (dpu_crtc_get_client_typ
[v6 0/3] Use interconnect API in MDSS on SDM845
The interconnect API provides an interface for consumer drivers to express their bandwidth needs in the SoC. This data is aggregated and the on-chip interconnect hardware is configured to the appropriate power/performance profile. MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirements for the given interconnected path. Subsequently, there is a clean up patch to remove all the references of the DPU custom bus scaling. There is corresponding DT patch with the source and destination ports defined for display driver which will be sent separately. Changes in v2: - Remove error log and unnecessary check (Jordan Crouse) - Fixed build error due to partial clean up Changes in v3: - Remove common property definitions (Rob Herring) - Code clean up involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke) - Condense multiple lines into a single line (Sean Paul) Changes in v4: - Add comments, spacings, tabs, proper port name and icc macro - Use port macros and change port string names (Georgi Djakov) Changes in v5: - Updated commit text and parenthesis alignment (Georgi Djakov) Changes in v6: - Change icc_set to icc_set_bw (Doug Anderson) Jayant Shekhar (3): drm/msm/dpu: clean up references of DPU custom bus scaling drm/msm/dpu: Integrate interconnect API in MDSS dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845 .../devicetree/bindings/display/msm/dpu.txt| 10 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 174 - drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +- drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 22 +-- 8 files changed, 144 insertions(+), 243 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v6 2/3] drm/msm/dpu: Integrate interconnect API in MDSS
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)
Changes in v6:
- Change to new icc_set API's (Doug Anderson)
Signed-off-by: Sravanthi Kollukuduru1
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
index 38576f8..38daf8a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -4,11 +4,15 @@
*/
#include "dpu_kms.h"
+#include
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
#define HW_INTR_STATUS 0x0010
+/* Max BW defined in KBps */
+#define MAX_BW 680
+
struct dpu_mdss {
struct msm_mdss base;
void __iomem *mmio;
@@ -16,8 +20,30 @@ struct dpu_mdss {
u32 hwversion;
struct dss_module_power mp;
struct dpu_irq_controller irq_controller;
+ struct icc_path *path[2];
+ u32 num_paths;
};
+static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
+ struct dpu_mdss *dpu_mdss)
+{
+ struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ dpu_mdss->path[0] = path0;
+ dpu_mdss->num_paths = 1;
+
+ if (!IS_ERR(path1)) {
+ dpu_mdss->path[1] = path1;
+ dpu_mdss->num_paths++;
+ }
+
+ return 0;
+}
+
static irqreturn_t dpu_mdss_irq(int irq, void *arg)
{
struct dpu_mdss *dpu_mdss = arg;
@@ -127,7 +153,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
+ u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
+
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (ret)
@@ -140,12 +170,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
if (ret)
DPU_ERROR("clock disable failed, ret:%d\n", ret);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], 0, 0);
+
return ret;
}
@@ -155,6 +188,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
struct msm_drm_private *priv = dev->dev_private;
struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
struct dss_module_power *mp = _mdss->mp;
+ int i;
pm_runtime_disable(dev->dev);
_dpu_mdss_irq_domain_fini(dpu_mdss);
@@ -162,6 +196,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
msm_dss_put_clk(mp->clk_config, mp->num_clk);
devm_kfree(>dev, mp->clk_config);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_put(dpu_mdss->path[i]);
+
if (dpu_mdss->mmio)
devm_iounmap(>dev, dpu_mdss->mmio);
dpu_mdss->mmio = NULL;
@@ -200,6 +237,10 @@ int dpu_mdss_init(struct drm_device *dev)
}
dpu_mdss->mmio_len = resource_size(res);
+ ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
+ if (ret)
+ return ret;
+
mp = _mdss->mp;
ret = msm_dss_parse_clock(pdev, mp);
if (ret) {
@@ -221,14 +262,14 @@ int dpu_mdss_init(struct drm_device *dev)
goto irq_error;
}
+ priv->mdss = _mdss->base;
+
pm_runtime_enable(dev->dev);
pm_ru
[v5 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845
From: Sravanthi Kollukuduru Add interconnect properties such as interconnect provider specifier , the edge source and destination ports which are required by the interconnect API to configure interconnect path for MDSS. Changes in v2: - none Changes in v3: - Remove common property definitions (Rob Herring) Changes in v4: - Use port macros and change port string names (Georgi Djakov) Changes in v5: - None Signed-off-by: Sravanthi Kollukuduru Signed-off-by: Jayant Shekhar --- Documentation/devicetree/bindings/display/msm/dpu.txt | 10 ++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index ad2e883..a61dd40 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -28,6 +28,11 @@ Required properties: - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. +- interconnects : interconnect path specifier for MDSS according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be + 2 paths corresponding to 2 AXI ports. +- interconnect-names : MDSS will have 2 port names to differentiate between the + 2 interconnect paths defined with interconnect specifier. Optional properties: - assigned-clocks: list of clock specifiers for clocks needing rate assignment @@ -86,6 +91,11 @@ Example: interrupt-controller; #interrupt-cells = <1>; + interconnects = <_hlos MASTER_MDP0 _hlos SLAVE_EBI1>, + <_hlos MASTER_MDP1 _hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <_iommu 0>; #address-cells = <2>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v5 2/3] drm/msm/dpu: Integrate interconnect API in MDSS
From: Sravanthi Kollukuduru
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
index 38576f8..b8fb197 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -4,11 +4,15 @@
*/
#include "dpu_kms.h"
+#include
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
#define HW_INTR_STATUS 0x0010
+/* Max BW defined in KBps */
+#define MAX_BW 680
+
struct dpu_mdss {
struct msm_mdss base;
void __iomem *mmio;
@@ -16,8 +20,30 @@ struct dpu_mdss {
u32 hwversion;
struct dss_module_power mp;
struct dpu_irq_controller irq_controller;
+ struct icc_path *path[2];
+ u32 num_paths;
};
+static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
+ struct dpu_mdss *dpu_mdss)
+{
+ struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ dpu_mdss->path[0] = path0;
+ dpu_mdss->num_paths = 1;
+
+ if (!IS_ERR(path1)) {
+ dpu_mdss->path[1] = path1;
+ dpu_mdss->num_paths++;
+ }
+
+ return 0;
+}
+
static irqreturn_t dpu_mdss_irq(int irq, void *arg)
{
struct dpu_mdss *dpu_mdss = arg;
@@ -127,7 +153,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
+ u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
+
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (ret)
@@ -140,12 +170,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
if (ret)
DPU_ERROR("clock disable failed, ret:%d\n", ret);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set(dpu_mdss->path[i], 0, 0);
+
return ret;
}
@@ -155,6 +188,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
struct msm_drm_private *priv = dev->dev_private;
struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
struct dss_module_power *mp = _mdss->mp;
+ int i;
pm_runtime_disable(dev->dev);
_dpu_mdss_irq_domain_fini(dpu_mdss);
@@ -162,6 +196,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
msm_dss_put_clk(mp->clk_config, mp->num_clk);
devm_kfree(>dev, mp->clk_config);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_put(dpu_mdss->path[i]);
+
if (dpu_mdss->mmio)
devm_iounmap(>dev, dpu_mdss->mmio);
dpu_mdss->mmio = NULL;
@@ -200,6 +237,10 @@ int dpu_mdss_init(struct drm_device *dev)
}
dpu_mdss->mmio_len = resource_size(res);
+ ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
+ if (ret)
+ return ret;
+
mp = _mdss->mp;
ret = msm_dss_parse_clock(pdev, mp);
if (ret) {
@@ -221,14 +262,14 @@ int dpu_mdss_init(struct drm_device *dev)
goto irq_error;
}
+ priv->mdss = _mdss->base;
+
pm_runtime_enable(dev->dev);
pm_runtime_get_sync(dev->dev);
dpu_mdss->hwve
[v5 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling
From: Sravanthi Kollukuduru
Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.
Changes in v2:
- Fixed build error due to partial clean up
Changes in v3:
- Condense multiple lines into a single line (Sean Paul)
Changes in v4:
- None
Changes in v5:
- None
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c| 174 +--
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h| 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 -
drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h| 22 +--
6 files changed, 89 insertions(+), 239 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 22e84b3..c75536e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -84,7 +84,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
struct dpu_core_perf_params *perf)
{
struct dpu_crtc_state *dpu_cstate;
- int i;
if (!kms || !kms->catalog || !crtc || !state || !perf) {
DPU_ERROR("invalid parameters\n");
@@ -95,35 +94,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
+ perf->bw_ctl = kms->catalog->perf.max_bw_high *
1000ULL;
- perf->max_per_pipe_ib[i] = perf->bw_ctl[i];
- }
+ perf->max_per_pipe_ib = perf->bw_ctl;
perf->core_clk_rate = kms->perf.max_core_clk_rate;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = 0;
- perf->max_per_pipe_ib[i] = 0;
- }
+ perf->bw_ctl = 0;
+ perf->max_per_pipe_ib = 0;
perf->core_clk_rate = 0;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->perf.fix_core_ab_vote;
- perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote;
- }
+ perf->bw_ctl = kms->perf.fix_core_ab_vote;
+ perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
perf->core_clk_rate = kms->perf.fix_core_clk_rate;
}
DPU_DEBUG(
- "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu
llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n",
+ "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
crtc->base.id, perf->core_clk_rate,
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]);
+ perf->max_per_pipe_ib, perf->bw_ctl);
}
int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
@@ -136,7 +124,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
struct dpu_crtc_state *dpu_cstate;
struct drm_crtc *tmp_crtc;
struct dpu_kms *kms;
- int i;
if (!crtc || !state) {
DPU_ERROR("invalid crtc\n");
@@ -158,31 +145,25 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
/* obtain new values */
_dpu_core_perf_calc_crtc(kms, crtc, state, _cstate->new_perf);
- for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
- i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i];
- curr_client_type = dpu_crtc_get_client_type(crtc);
+ bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
+ curr_client_type = dpu_crtc_get_client_type(crtc);
- drm_for_each_crtc(tmp_crtc, crtc->dev) {
- if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
- (dpu_crtc_get_client_typ
[v5 0/3] Use interconnect API in MDSS on SDM845
The interconnect API provides an interface for consumer drivers to express their bandwidth needs in the SoC. This data is aggregated and the on-chip interconnect hardware is configured to the appropriate power/performance profile. MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirements for the given interconnected path. Subsequently, there is a clean up patch to remove all the references of the DPU custom bus scaling. There is corresponding DT patch with the source and destination ports defined for display driver which will be sent separately. Changes in v2: - Remove error log and unnecessary check (Jordan Crouse) - Fixed build error due to partial clean up Changes in v3: - Remove common property definitions (Rob Herring) - Code clean up involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke) - Condense multiple lines into a single line (Sean Paul) Changes in v4: - Add comments, spacings, tabs, proper port name and icc macro - Use port macros and change port string names (Georgi Djakov) Changes in v5: - Updated commit text and parenthesis alignment (Georgi Djakov) Sravanthi Kollukuduru (3): drm/msm/dpu: clean up references of DPU custom bus scaling drm/msm/dpu: Integrate interconnect API in MDSS dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845 .../devicetree/bindings/display/msm/dpu.txt| 10 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 174 - drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +- drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 22 +-- 8 files changed, 144 insertions(+), 243 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v1] arm64: dts: sdm845: add interconnect DT entries for MDSS on SDM845
Add interconnect properties such as the source and the destination ports for MDSS on SDM845. Signed-off-by: Jayant Shekhar --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 5 + 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0ded68c..ba97547 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2120,6 +2120,11 @@ interrupt-controller; #interrupt-cells = <1>; + interconnects = <_hlos MASTER_MDP0 _hlos SLAVE_EBI1>, + <_hlos MASTER_MDP1 _hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <_smmu 0x880 0x8>, <_smmu 0xc80 0x8>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v4 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling
From: Sravanthi Kollukuduru
Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.
Changes in v2:
- Fixed build error due to partial clean up
Changes in v3:
- Condense multiple lines into a single line (Sean Paul)
Changes in v4:
- None
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c| 174 +--
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h| 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 -
drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h| 22 +--
6 files changed, 89 insertions(+), 239 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 22e84b3..c75536e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -84,7 +84,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
struct dpu_core_perf_params *perf)
{
struct dpu_crtc_state *dpu_cstate;
- int i;
if (!kms || !kms->catalog || !crtc || !state || !perf) {
DPU_ERROR("invalid parameters\n");
@@ -95,35 +94,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
+ perf->bw_ctl = kms->catalog->perf.max_bw_high *
1000ULL;
- perf->max_per_pipe_ib[i] = perf->bw_ctl[i];
- }
+ perf->max_per_pipe_ib = perf->bw_ctl;
perf->core_clk_rate = kms->perf.max_core_clk_rate;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = 0;
- perf->max_per_pipe_ib[i] = 0;
- }
+ perf->bw_ctl = 0;
+ perf->max_per_pipe_ib = 0;
perf->core_clk_rate = 0;
} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
- for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- perf->bw_ctl[i] = kms->perf.fix_core_ab_vote;
- perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote;
- }
+ perf->bw_ctl = kms->perf.fix_core_ab_vote;
+ perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
perf->core_clk_rate = kms->perf.fix_core_clk_rate;
}
DPU_DEBUG(
- "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu
llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n",
+ "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
crtc->base.id, perf->core_clk_rate,
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
- perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI],
- perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]);
+ perf->max_per_pipe_ib, perf->bw_ctl);
}
int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
@@ -136,7 +124,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
struct dpu_crtc_state *dpu_cstate;
struct drm_crtc *tmp_crtc;
struct dpu_kms *kms;
- int i;
if (!crtc || !state) {
DPU_ERROR("invalid crtc\n");
@@ -158,31 +145,25 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
/* obtain new values */
_dpu_core_perf_calc_crtc(kms, crtc, state, _cstate->new_perf);
- for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
- i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
- bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i];
- curr_client_type = dpu_crtc_get_client_type(crtc);
+ bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
+ curr_client_type = dpu_crtc_get_client_type(crtc);
- drm_for_each_crtc(tmp_crtc, crtc->dev) {
- if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
- (dpu_crtc_get_client_typ
[PATCH v4 2/3] drm/msm/dpu: Integrate interconnect API in MDSS
From: Sravanthi Kollukuduru
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth/latency/QoS requirements for the given
interconnected path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Signed-off-by: Sravanthi Kollukuduru
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
index 38576f8..fcaa71f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -4,11 +4,15 @@
*/
#include "dpu_kms.h"
+#include
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
#define HW_INTR_STATUS 0x0010
+/* Max BW defined in KBps */
+#define MAX_BW 680
+
struct dpu_mdss {
struct msm_mdss base;
void __iomem *mmio;
@@ -16,8 +20,30 @@ struct dpu_mdss {
u32 hwversion;
struct dss_module_power mp;
struct dpu_irq_controller irq_controller;
+ struct icc_path *path[2];
+ u32 num_paths;
};
+static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
+ struct dpu_mdss *dpu_mdss)
+{
+ struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ dpu_mdss->path[0] = path0;
+ dpu_mdss->num_paths = 1;
+
+ if (!IS_ERR(path1)) {
+ dpu_mdss->path[1] = path1;
+ dpu_mdss->num_paths++;
+ }
+
+ return 0;
+}
+
static irqreturn_t dpu_mdss_irq(int irq, void *arg)
{
struct dpu_mdss *dpu_mdss = arg;
@@ -127,7 +153,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
+ u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
+
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (ret)
@@ -140,12 +170,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = _mdss->mp;
- int ret;
+ int ret, i;
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
if (ret)
DPU_ERROR("clock disable failed, ret:%d\n", ret);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set(dpu_mdss->path[i], 0, 0);
+
return ret;
}
@@ -155,6 +188,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
struct msm_drm_private *priv = dev->dev_private;
struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
struct dss_module_power *mp = _mdss->mp;
+ int i;
pm_runtime_disable(dev->dev);
_dpu_mdss_irq_domain_fini(dpu_mdss);
@@ -162,6 +196,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
msm_dss_put_clk(mp->clk_config, mp->num_clk);
devm_kfree(>dev, mp->clk_config);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_put(dpu_mdss->path[i]);
+
if (dpu_mdss->mmio)
devm_iounmap(>dev, dpu_mdss->mmio);
dpu_mdss->mmio = NULL;
@@ -200,6 +237,10 @@ int dpu_mdss_init(struct drm_device *dev)
}
dpu_mdss->mmio_len = resource_size(res);
+ ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
+ if (ret)
+ return ret;
+
mp = _mdss->mp;
ret = msm_dss_parse_clock(pdev, mp);
if (ret) {
@@ -221,14 +262,14 @@ int dpu_mdss_init(struct drm_device *dev)
goto irq_error;
}
+ priv->mdss = _mdss->base;
+
pm_runtime_enable(dev->dev);
pm_runtime_get_sync(dev->dev);
dpu_mdss->hwversion = readl_relaxed(dpu_mdss->mmio);
pm_runtime_put_sync(dev->dev);
- p
[PATCH v4 0/3] Use interconnect API in MDSS on SDM845
The interconnect API provides an interface for consumer drivers to express their bandwidth needs in the SoC. This data is aggregated and the on-chip interconnect hardware is configured to the appropriate power/performance profile. MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirements for the given interconnected path. Subsequently, there is a clean up patch to remove all the references of the DPU custom bus scaling. There is corresponding DT patch with the source and destination ports defined for display driver which will be sent separately. Changes in v2: - Remove error log and unnecessary check (Jordan Crouse) - Fixed build error due to partial clean up Changes in v3: - Remove common property definitions (Rob Herring) - Code clean up involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke) - Condense multiple lines into a single line (Sean Paul) Changes in v4: - Add comments, spacings, tabs, proper port name and icc macro - Use port macros and change port string names (Georgi Djakov) Sravanthi Kollukuduru (3): drm/msm/dpu: clean up references of DPU custom bus scaling drm/msm/dpu: Integrate interconnect API in MDSS dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845 .../devicetree/bindings/display/msm/dpu.txt| 10 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 174 - drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +- drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 22 +-- 8 files changed, 144 insertions(+), 243 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v4 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845
From: Sravanthi Kollukuduru Add interconnect properties such as interconnect provider specifier , the edge source and destination ports which are required by the interconnect API to configure interconnect path for MDSS. Changes in v2: - none Changes in v3: - Remove common property definitions (Rob Herring) Changes in v4: - Use port macros and change port string names (Georgi Djakov) Signed-off-by: Sravanthi Kollukuduru Signed-off-by: Jayant Shekhar --- Documentation/devicetree/bindings/display/msm/dpu.txt | 10 ++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index ad2e883..a61dd40 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -28,6 +28,11 @@ Required properties: - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. +- interconnects : interconnect path specifier for MDSS according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be + 2 paths corresponding to 2 AXI ports. +- interconnect-names : MDSS will have 2 port names to differentiate between the + 2 interconnect paths defined with interconnect specifier. Optional properties: - assigned-clocks: list of clock specifiers for clocks needing rate assignment @@ -86,6 +91,11 @@ Example: interrupt-controller; #interrupt-cells = <1>; + interconnects = <_hlos MASTER_MDP0 _hlos SLAVE_EBI1>, + <_hlos MASTER_MDP1 _hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <_iommu 0>; #address-cells = <2>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v1] drm/msm/dpu: Remove unused enum and comment from dpu mdss
Remove enum dpu_iommu_domain from dpu mdss as its unused.
Remove unnecessary comment for variable which is already
removed.
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 7 ---
1 file changed, 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index 68c54d2..1ab8d4a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -258,12 +258,6 @@ enum dpu_vbif {
VBIF_NRT = VBIF_1
};
-enum dpu_iommu_domain {
- DPU_IOMMU_DOMAIN_UNSECURE,
- DPU_IOMMU_DOMAIN_SECURE,
- DPU_IOMMU_DOMAIN_MAX
-};
-
/**
* DPU HW,Component order color map
*/
@@ -358,7 +352,6 @@ enum dpu_3d_blend_mode {
* @alpha_enable: whether the format has an alpha channel
* @num_planes: number of planes (including meta data planes)
* @fetch_mode: linear, tiled, or ubwc hw fetch behavior
- * @is_yuv: is format a yuv variant
* @flag: usage bit flags
* @tile_width: format tile width
* @tile_height: format tile height
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v1] drm/msm/dpu: Cleanup dpu plane interface
Remove unused functions from dpu plane interface
and unused variables from dpu plane state structure.
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 27 ---
1 file changed, 27 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index 7fed0b6..0e6063a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -28,23 +28,18 @@
/**
* struct dpu_plane_state: Define dpu extension of drm plane state object
* @base: base drm plane state object
- * @property_state: Local storage for msm_prop properties
- * @property_values: cached plane property values
* @aspace:pointer to address space for input/output buffers
- * @input_fence: dereferenced input fence pointer
* @stage: assigned by crtc blender
* @multirect_index: index of the rectangle of SSPP
* @multirect_mode: parallel or time multiplex multirect mode
* @pending: whether the current update is still pending
* @scaler3_cfg: configuration data for scaler3
* @pixel_ext: configuration data for pixel extensions
- * @scaler_check_state: indicates status of user provided pixel extension data
* @cdp_cfg: CDP configuration
*/
struct dpu_plane_state {
struct drm_plane_state base;
struct msm_gem_address_space *aspace;
- void *input_fence;
enum dpu_stage stage;
uint32_t multirect_index;
uint32_t multirect_mode;
@@ -107,12 +102,6 @@ void dpu_plane_get_ctl_flush(struct drm_plane *plane,
struct dpu_hw_ctl *ctl,
void dpu_plane_flush(struct drm_plane *plane);
/**
- * dpu_plane_kickoff - final plane operations before commit kickoff
- * @plane: Pointer to drm plane structure
- */
-void dpu_plane_kickoff(struct drm_plane *plane);
-
-/**
* dpu_plane_set_error: enable/disable error condition
* @plane: pointer to drm_plane structure
*/
@@ -147,14 +136,6 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
void dpu_plane_clear_multirect(const struct drm_plane_state *drm_state);
/**
- * dpu_plane_wait_input_fence - wait for input fence object
- * @plane: Pointer to DRM plane object
- * @wait_ms: Wait timeout value
- * Returns: Zero on success
- */
-int dpu_plane_wait_input_fence(struct drm_plane *plane, uint32_t wait_ms);
-
-/**
* dpu_plane_color_fill - enables color fill on plane
* @plane: Pointer to DRM plane object
* @color: RGB fill color value, [23..16] Blue, [15..8] Green, [7..0] Red
@@ -164,12 +145,4 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
int dpu_plane_color_fill(struct drm_plane *plane,
uint32_t color, uint32_t alpha);
-/**
- * dpu_plane_set_revalidate - sets revalidate flag which forces a full
- * validation of the plane properties in the next atomic check
- * @plane: Pointer to DRM plane object
- * @enable: Boolean to set/unset the flag
- */
-void dpu_plane_set_revalidate(struct drm_plane *plane, bool enable);
-
#endif /* _DPU_PLANE_H_ */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
[v3] drm/msm/dpu: Clean up dpu hw interrupts
Remove unused functions and macros from files handling
dpu hardware interrupts.
changes in v2:
Removed clear_interrupt_status (Jordan Crouse)
changes in v3:
Changed commit text
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 44 ---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 44 ---
2 files changed, 88 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index c0b7f00..8a28a03 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -170,10 +170,6 @@
/**
* AD4 interrupt status bit definitions
*/
-#define DPU_INTR_BRIGHTPR_UPDATED BIT(4)
-#define DPU_INTR_DARKENH_UPDATED BIT(3)
-#define DPU_INTR_STREN_OUTROI_UPDATED BIT(2)
-#define DPU_INTR_STREN_INROI_UPDATED BIT(1)
#define DPU_INTR_BACKLIGHT_UPDATED BIT(0)
/**
* struct dpu_intr_reg - array of DPU register sets
@@ -782,18 +778,6 @@ static int dpu_hw_intr_irqidx_lookup(enum dpu_intr_type
intr_type,
return -EINVAL;
}
-static void dpu_hw_intr_set_mask(struct dpu_hw_intr *intr, uint32_t reg_off,
- uint32_t mask)
-{
- if (!intr)
- return;
-
- DPU_REG_WRITE(>hw, reg_off, mask);
-
- /* ensure register writes go through */
- wmb();
-}
-
static void dpu_hw_intr_dispatch_irq(struct dpu_hw_intr *intr,
void (*cbfunc)(void *, int),
void *arg)
@@ -1004,18 +988,6 @@ static int dpu_hw_intr_disable_irqs(struct dpu_hw_intr
*intr)
return 0;
}
-static int dpu_hw_intr_get_valid_interrupts(struct dpu_hw_intr *intr,
- uint32_t *mask)
-{
- if (!intr || !mask)
- return -EINVAL;
-
- *mask = IRQ_SOURCE_MDP | IRQ_SOURCE_DSI0 | IRQ_SOURCE_DSI1
- | IRQ_SOURCE_HDMI | IRQ_SOURCE_EDP;
-
- return 0;
-}
-
static void dpu_hw_intr_get_interrupt_statuses(struct dpu_hw_intr *intr)
{
int i;
@@ -1065,19 +1037,6 @@ static void dpu_hw_intr_clear_intr_status_nolock(struct
dpu_hw_intr *intr,
wmb();
}
-static void dpu_hw_intr_clear_interrupt_status(struct dpu_hw_intr *intr,
- int irq_idx)
-{
- unsigned long irq_flags;
-
- if (!intr)
- return;
-
- spin_lock_irqsave(>irq_lock, irq_flags);
- dpu_hw_intr_clear_intr_status_nolock(intr, irq_idx);
- spin_unlock_irqrestore(>irq_lock, irq_flags);
-}
-
static u32 dpu_hw_intr_get_interrupt_status(struct dpu_hw_intr *intr,
int irq_idx, bool clear)
{
@@ -1113,16 +1072,13 @@ static u32 dpu_hw_intr_get_interrupt_status(struct
dpu_hw_intr *intr,
static void __setup_intr_ops(struct dpu_hw_intr_ops *ops)
{
- ops->set_mask = dpu_hw_intr_set_mask;
ops->irq_idx_lookup = dpu_hw_intr_irqidx_lookup;
ops->enable_irq = dpu_hw_intr_enable_irq;
ops->disable_irq = dpu_hw_intr_disable_irq;
ops->dispatch_irqs = dpu_hw_intr_dispatch_irq;
ops->clear_all_irqs = dpu_hw_intr_clear_irqs;
ops->disable_all_irqs = dpu_hw_intr_disable_irqs;
- ops->get_valid_interrupts = dpu_hw_intr_get_valid_interrupts;
ops->get_interrupt_statuses = dpu_hw_intr_get_interrupt_statuses;
- ops->clear_interrupt_status = dpu_hw_intr_clear_interrupt_status;
ops->clear_intr_status_nolock = dpu_hw_intr_clear_intr_status_nolock;
ops->get_interrupt_status = dpu_hw_intr_get_interrupt_status;
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 61e4cba..4d7a1c7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -20,13 +20,6 @@
#include "dpu_hw_util.h"
#include "dpu_hw_mdss.h"
-#define IRQ_SOURCE_MDP BIT(0)
-#define IRQ_SOURCE_DSI0BIT(4)
-#define IRQ_SOURCE_DSI1BIT(5)
-#define IRQ_SOURCE_HDMIBIT(8)
-#define IRQ_SOURCE_EDP BIT(12)
-#define IRQ_SOURCE_MHL BIT(16)
-
/**
* dpu_intr_type - HW Interrupt Type
* @DPU_IRQ_TYPE_WB_ROT_COMP: WB rotator done
@@ -96,18 +89,6 @@ enum dpu_intr_type {
*/
struct dpu_hw_intr_ops {
/**
-* set_mask - Programs the given interrupt register with the
-*given interrupt mask. Register value will get overwritten.
-* @intr: HW interrupt handle
-* @reg_off:MDSS HW register offset
-* @irqmask:IRQ mask value
-*/
- void (*set_mask)(
- struct dpu_hw_intr *intr,
- uint32_t reg,
- uint32_t irqmask);
-
- /**
* irq_idx_lookup - Lookup IRQ index on the HW interrupt type
* Used for all irq related ops
* @intr_type:
[DPU PATCH v2] drm/msm/dpu: Clean up dpu hw interrupts
Remove unused functions and macros from dpu hw interrupts
file.
changes in v2:
Removed clear_interrupt_status (Jordan Crouse)
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 44 ---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 44 ---
2 files changed, 88 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index c0b7f00..8a28a03 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -170,10 +170,6 @@
/**
* AD4 interrupt status bit definitions
*/
-#define DPU_INTR_BRIGHTPR_UPDATED BIT(4)
-#define DPU_INTR_DARKENH_UPDATED BIT(3)
-#define DPU_INTR_STREN_OUTROI_UPDATED BIT(2)
-#define DPU_INTR_STREN_INROI_UPDATED BIT(1)
#define DPU_INTR_BACKLIGHT_UPDATED BIT(0)
/**
* struct dpu_intr_reg - array of DPU register sets
@@ -782,18 +778,6 @@ static int dpu_hw_intr_irqidx_lookup(enum dpu_intr_type
intr_type,
return -EINVAL;
}
-static void dpu_hw_intr_set_mask(struct dpu_hw_intr *intr, uint32_t reg_off,
- uint32_t mask)
-{
- if (!intr)
- return;
-
- DPU_REG_WRITE(>hw, reg_off, mask);
-
- /* ensure register writes go through */
- wmb();
-}
-
static void dpu_hw_intr_dispatch_irq(struct dpu_hw_intr *intr,
void (*cbfunc)(void *, int),
void *arg)
@@ -1004,18 +988,6 @@ static int dpu_hw_intr_disable_irqs(struct dpu_hw_intr
*intr)
return 0;
}
-static int dpu_hw_intr_get_valid_interrupts(struct dpu_hw_intr *intr,
- uint32_t *mask)
-{
- if (!intr || !mask)
- return -EINVAL;
-
- *mask = IRQ_SOURCE_MDP | IRQ_SOURCE_DSI0 | IRQ_SOURCE_DSI1
- | IRQ_SOURCE_HDMI | IRQ_SOURCE_EDP;
-
- return 0;
-}
-
static void dpu_hw_intr_get_interrupt_statuses(struct dpu_hw_intr *intr)
{
int i;
@@ -1065,19 +1037,6 @@ static void dpu_hw_intr_clear_intr_status_nolock(struct
dpu_hw_intr *intr,
wmb();
}
-static void dpu_hw_intr_clear_interrupt_status(struct dpu_hw_intr *intr,
- int irq_idx)
-{
- unsigned long irq_flags;
-
- if (!intr)
- return;
-
- spin_lock_irqsave(>irq_lock, irq_flags);
- dpu_hw_intr_clear_intr_status_nolock(intr, irq_idx);
- spin_unlock_irqrestore(>irq_lock, irq_flags);
-}
-
static u32 dpu_hw_intr_get_interrupt_status(struct dpu_hw_intr *intr,
int irq_idx, bool clear)
{
@@ -1113,16 +1072,13 @@ static u32 dpu_hw_intr_get_interrupt_status(struct
dpu_hw_intr *intr,
static void __setup_intr_ops(struct dpu_hw_intr_ops *ops)
{
- ops->set_mask = dpu_hw_intr_set_mask;
ops->irq_idx_lookup = dpu_hw_intr_irqidx_lookup;
ops->enable_irq = dpu_hw_intr_enable_irq;
ops->disable_irq = dpu_hw_intr_disable_irq;
ops->dispatch_irqs = dpu_hw_intr_dispatch_irq;
ops->clear_all_irqs = dpu_hw_intr_clear_irqs;
ops->disable_all_irqs = dpu_hw_intr_disable_irqs;
- ops->get_valid_interrupts = dpu_hw_intr_get_valid_interrupts;
ops->get_interrupt_statuses = dpu_hw_intr_get_interrupt_statuses;
- ops->clear_interrupt_status = dpu_hw_intr_clear_interrupt_status;
ops->clear_intr_status_nolock = dpu_hw_intr_clear_intr_status_nolock;
ops->get_interrupt_status = dpu_hw_intr_get_interrupt_status;
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 61e4cba..4d7a1c7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -20,13 +20,6 @@
#include "dpu_hw_util.h"
#include "dpu_hw_mdss.h"
-#define IRQ_SOURCE_MDP BIT(0)
-#define IRQ_SOURCE_DSI0BIT(4)
-#define IRQ_SOURCE_DSI1BIT(5)
-#define IRQ_SOURCE_HDMIBIT(8)
-#define IRQ_SOURCE_EDP BIT(12)
-#define IRQ_SOURCE_MHL BIT(16)
-
/**
* dpu_intr_type - HW Interrupt Type
* @DPU_IRQ_TYPE_WB_ROT_COMP: WB rotator done
@@ -96,18 +89,6 @@ enum dpu_intr_type {
*/
struct dpu_hw_intr_ops {
/**
-* set_mask - Programs the given interrupt register with the
-*given interrupt mask. Register value will get overwritten.
-* @intr: HW interrupt handle
-* @reg_off:MDSS HW register offset
-* @irqmask:IRQ mask value
-*/
- void (*set_mask)(
- struct dpu_hw_intr *intr,
- uint32_t reg,
- uint32_t irqmask);
-
- /**
* irq_idx_lookup - Lookup IRQ index on the HW interrupt type
* Used for all irq related ops
* @intr_type: Interrupt type def
[DPU PATCH] drm/msm/dpu: Clean up dpu hw interrupts
Remove unused functions and macros from dpu hw interrupts
file.
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 30
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 34 ---
2 files changed, 64 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index c0b7f00..0f70cee 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -170,10 +170,6 @@
/**
* AD4 interrupt status bit definitions
*/
-#define DPU_INTR_BRIGHTPR_UPDATED BIT(4)
-#define DPU_INTR_DARKENH_UPDATED BIT(3)
-#define DPU_INTR_STREN_OUTROI_UPDATED BIT(2)
-#define DPU_INTR_STREN_INROI_UPDATED BIT(1)
#define DPU_INTR_BACKLIGHT_UPDATED BIT(0)
/**
* struct dpu_intr_reg - array of DPU register sets
@@ -782,18 +778,6 @@ static int dpu_hw_intr_irqidx_lookup(enum dpu_intr_type
intr_type,
return -EINVAL;
}
-static void dpu_hw_intr_set_mask(struct dpu_hw_intr *intr, uint32_t reg_off,
- uint32_t mask)
-{
- if (!intr)
- return;
-
- DPU_REG_WRITE(>hw, reg_off, mask);
-
- /* ensure register writes go through */
- wmb();
-}
-
static void dpu_hw_intr_dispatch_irq(struct dpu_hw_intr *intr,
void (*cbfunc)(void *, int),
void *arg)
@@ -1004,18 +988,6 @@ static int dpu_hw_intr_disable_irqs(struct dpu_hw_intr
*intr)
return 0;
}
-static int dpu_hw_intr_get_valid_interrupts(struct dpu_hw_intr *intr,
- uint32_t *mask)
-{
- if (!intr || !mask)
- return -EINVAL;
-
- *mask = IRQ_SOURCE_MDP | IRQ_SOURCE_DSI0 | IRQ_SOURCE_DSI1
- | IRQ_SOURCE_HDMI | IRQ_SOURCE_EDP;
-
- return 0;
-}
-
static void dpu_hw_intr_get_interrupt_statuses(struct dpu_hw_intr *intr)
{
int i;
@@ -1113,14 +1085,12 @@ static u32 dpu_hw_intr_get_interrupt_status(struct
dpu_hw_intr *intr,
static void __setup_intr_ops(struct dpu_hw_intr_ops *ops)
{
- ops->set_mask = dpu_hw_intr_set_mask;
ops->irq_idx_lookup = dpu_hw_intr_irqidx_lookup;
ops->enable_irq = dpu_hw_intr_enable_irq;
ops->disable_irq = dpu_hw_intr_disable_irq;
ops->dispatch_irqs = dpu_hw_intr_dispatch_irq;
ops->clear_all_irqs = dpu_hw_intr_clear_irqs;
ops->disable_all_irqs = dpu_hw_intr_disable_irqs;
- ops->get_valid_interrupts = dpu_hw_intr_get_valid_interrupts;
ops->get_interrupt_statuses = dpu_hw_intr_get_interrupt_statuses;
ops->clear_interrupt_status = dpu_hw_intr_clear_interrupt_status;
ops->clear_intr_status_nolock = dpu_hw_intr_clear_intr_status_nolock;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 61e4cba..985f873 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -20,13 +20,6 @@
#include "dpu_hw_util.h"
#include "dpu_hw_mdss.h"
-#define IRQ_SOURCE_MDP BIT(0)
-#define IRQ_SOURCE_DSI0BIT(4)
-#define IRQ_SOURCE_DSI1BIT(5)
-#define IRQ_SOURCE_HDMIBIT(8)
-#define IRQ_SOURCE_EDP BIT(12)
-#define IRQ_SOURCE_MHL BIT(16)
-
/**
* dpu_intr_type - HW Interrupt Type
* @DPU_IRQ_TYPE_WB_ROT_COMP: WB rotator done
@@ -96,18 +89,6 @@ enum dpu_intr_type {
*/
struct dpu_hw_intr_ops {
/**
-* set_mask - Programs the given interrupt register with the
-*given interrupt mask. Register value will get overwritten.
-* @intr: HW interrupt handle
-* @reg_off:MDSS HW register offset
-* @irqmask:IRQ mask value
-*/
- void (*set_mask)(
- struct dpu_hw_intr *intr,
- uint32_t reg,
- uint32_t irqmask);
-
- /**
* irq_idx_lookup - Lookup IRQ index on the HW interrupt type
* Used for all irq related ops
* @intr_type: Interrupt type defined in dpu_intr_type
@@ -206,21 +187,6 @@ struct dpu_hw_intr_ops {
struct dpu_hw_intr *intr,
int irq_idx,
bool clear);
-
- /**
-* get_valid_interrupts - Gets a mask of all valid interrupt sources
-*within DPU. These are actually status bits
-*within interrupt registers that specify the
-*source of the interrupt in IRQs. For example,
-*valid interrupt sources can be MDP, DSI,
-*HDMI etc.
-* @intr: HW interrupt handle
-* @mask: Returning the interrupt source MASK
-* @return:
[DPU PATCH] drm/msm/dpu: Fix vblank refcount mismatch
_dpu_crtc_vblank_enable_no_lock releases crtc_lock as
its needed for power handle operations. This opens up a
window where in a thread running dpu_crtc_disable and a thread
running dpu_crtc_vblank can race in using dpu_crtc->enabled.
dpu_crtc_disable will change the state, where as dpu_crtc_vblank
use the variable. The fix is to cache the crtc enabled state
while holding the lock and use it as a gate in calling
_dpu_crtc_vblank_enable_no_lock.
This issue was introduced with the commit cf871c48
(drm/msm/dpu: Remove suspend state tracking from crtc).
Below are stack traces of thread 1 and thread 2 in good case
and bad case:
Bad case:
-
Thread 1
dpu_encoder_phys_vid_control_vblank_irq+0xd0/0x170
dpu_encoder_register_vblank_callback+0xb8/0x100
_dpu_crtc_vblank_enable_no_lock+0x240/0x288
dpu_crtc_disable+0xc4/0x288
drm_atomic_helper_commit_modeset_disables+0x19c/0x350
msm_atomic_commit_tail+0x48/0x144
commit_tail+0x44/0x70
drm_atomic_helper_commit+0xf0/0xf8
drm_atomic_commit+0x40/0x4c
drm_mode_atomic_ioctl+0x374/0x90c
drm_ioctl_kernel+0xac/0xec
drm_ioctl+0x218/0x384
drm_compat_ioctl+0xd8/0xe8
Thread 2:
dpu_encoder_phys_vid_control_vblank_irq+0x74/0x170
dpu_encoder_register_vblank_callback+0xb8/0x100
_dpu_crtc_vblank_enable_no_lock+0x240/0x288
dpu_crtc_vblank+0xa8/0x118
dpu_kms_disable_vblank+0x20/0x2c
vblank_ctrl_worker+0xa0/0xe0
kthread_worker_fn+0xe4/0x1a4
kthread+0x11c/0x12c
ret_from_fork+0x10/0x18
Good case:
--
Thread 1:
dpu_encoder_phys_vid_control_vblank_irq+0xd0/0x170
dpu_encoder_phys_vid_irq_control+0xc8/0x110
_dpu_encoder_irq_control+0x48/0xa0
_dpu_encoder_resource_control_helper+0xb4/0x10c
dpu_encoder_resource_control+0x4e0/0x664
dpu_encoder_virt_enable+0xb8/0x120
dpu_kms_encoder_enable+0x34/0xcc
drm_atomic_helper_commit_modeset_enables+0x120/0x1b8
msm_atomic_commit_tail+0x5c/0x144
commit_tail+0x44/0x70
drm_atomic_helper_commit+0xf0/0xf8
drm_atomic_commit+0x40/0x4c
drm_mode_atomic_ioctl+0x374/0x90c
Thread 2:
dpu_crtc_vblank+0xc8/0x118
dpu_kms_disable_vblank+0x20/0x2c
vblank_ctrl_worker+0xa0/0xe0
kthread_worker_fn+0xe4/0x1a4
kthread+0x11c/0x12c
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 17 ++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 630cbaa..e81ad8c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -877,6 +877,7 @@ static void dpu_crtc_disable(struct drm_crtc *crtc)
struct drm_encoder *encoder;
struct msm_drm_private *priv;
unsigned long flags;
+ bool crtc_en;
if (!crtc || !crtc->dev || !crtc->dev->dev_private || !crtc->state) {
DPU_ERROR("invalid crtc\n");
@@ -901,11 +902,21 @@ static void dpu_crtc_disable(struct drm_crtc *crtc)
atomic_read(_crtc->frame_pending));
trace_dpu_crtc_disable(DRMID(crtc), false, dpu_crtc);
- if (dpu_crtc->enabled && dpu_crtc->vblank_requested) {
- _dpu_crtc_vblank_enable_no_lock(dpu_crtc, false);
- }
+
+ /*
+* Cache vblank enabled before calling _dpu_crtc_vblank_enable_no_lock,
+* because we release crtc_lock inside and acquire it back. While lock
+* is released, there are cases where dpu_crtc_vblank comes in between
+* while disable is going on. dpu_crtc_vblank further calls
+* _dpu_crtc_vblank_enable_no_lock which tries vblank disable again
+* resulting in refcount mismatch.
+*/
+ crtc_en = dpu_crtc->enabled;
dpu_crtc->enabled = false;
+ if (crtc_en && dpu_crtc->vblank_requested)
+ _dpu_crtc_vblank_enable_no_lock(dpu_crtc, false);
+
if (atomic_read(_crtc->frame_pending)) {
trace_dpu_crtc_disable_frame_pending(DRMID(crtc),
atomic_read(_crtc->frame_pending));
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
[DPU PATCH ] drm/msm/dpu: Fix clock issue after bind failure
In case of msm drm bind failure, pm runtime put sync is called from dsi driver which issues an asynchronous put on mdss device. Subsequently when dpu_mdss_destroy is triggered the change will make sure to put the mdss device in suspend and clearing pending work if not scheduled. Signed-off-by: Jayant Shekhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 2d66025..030229a 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -191,6 +191,7 @@ static void dpu_mdss_destroy(struct drm_device *dev) struct dss_module_power *mp = _mdss->mp; int i; + pm_runtime_suspend(dev->dev); pm_runtime_disable(dev->dev); _dpu_mdss_irq_domain_fini(dpu_mdss); free_irq(platform_get_irq(pdev, 0), dpu_mdss); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[DPU PATCH ] drm/msm/dpu: Ignore alpha for XBGR8888 format
Alpha enable in the pixel format will help in
selecting the blend rule. By keeping alpha enable
to true we are allowing foreground alpha to blend
with the layer. If alpha is don't care, then we
should not allow pixel alpha to be part of blend
equation.
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c
index bfcd165..d743e7c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c
@@ -216,7 +216,7 @@ struct dpu_media_color_map {
INTERLEAVED_RGB_FMT(XBGR,
COLOR_8BIT, COLOR_8BIT, COLOR_8BIT, COLOR_8BIT,
C2_R_Cr, C0_G_Y, C1_B_Cb, C3_ALPHA, 4,
- true, 4, 0,
+ false, 4, 0,
DPU_FETCH_LINEAR, 1),
INTERLEAVED_RGB_FMT(RGBA,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
[Patch v3 ] drm/msm/dpu: Correct dpu destroy and disable order
In case of msm drm bind failure, pm runtime put sync is called from dsi driver which issues an asynchronous put on mdss device. Subsequently when dpu_mdss_destroy is triggered the change will make sure to put the mdss device in suspend and clearing pending work if not scheduled. Changes in v2: - Removed double spacings [Jeykumar] Changes in v3: - Fix clock on issue during bootup [Rajendra] Signed-off-by: Jayant Shekhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 6 ++ 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index fd9c893..df8127b 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -156,18 +156,16 @@ static void dpu_mdss_destroy(struct drm_device *dev) struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss); struct dss_module_power *mp = _mdss->mp; + pm_runtime_suspend(dev->dev); + pm_runtime_disable(dev->dev); _dpu_mdss_irq_domain_fini(dpu_mdss); - free_irq(platform_get_irq(pdev, 0), dpu_mdss); - msm_dss_put_clk(mp->clk_config, mp->num_clk); devm_kfree(>dev, mp->clk_config); if (dpu_mdss->mmio) devm_iounmap(>dev, dpu_mdss->mmio); dpu_mdss->mmio = NULL; - - pm_runtime_disable(dev->dev); priv->mdss = NULL; } -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[[DPU PATCH]] drm/msm/dpu: Correct dpu destroy and disable order
In case of msm drm bind failure, dpu_mdss_destroy is triggered. In this function, resources are freed and pm runtime disable is called, which triggers dpu_mdss_disable. Now in dpu_mdss_disable, driver tries to access a memory which is already freed. This results in kernel panic. Fix this by ensuring proper sequence of dpu destroy and disable calls. Change-Id: Id6e01a537ae9c40789c5752dc28c397391ab7dfe Signed-off-by: Jayant Shekhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index fd9c893..cd9a6bd 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -156,6 +156,8 @@ static void dpu_mdss_destroy(struct drm_device *dev) struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss); struct dss_module_power *mp = _mdss->mp; + pm_runtime_disable(dev->dev); + _dpu_mdss_irq_domain_fini(dpu_mdss); free_irq(platform_get_irq(pdev, 0), dpu_mdss); @@ -167,7 +169,6 @@ static void dpu_mdss_destroy(struct drm_device *dev) devm_iounmap(>dev, dpu_mdss->mmio); dpu_mdss->mmio = NULL; - pm_runtime_disable(dev->dev); priv->mdss = NULL; } -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v2] drm/msm/dpu: Correct dpu destroy and disable order
In case of msm drm bind failure, dpu_mdss_destroy is triggered. In this function, resources are freed and pm runtime disable is called, which triggers dpu_mdss_disable. Now in dpu_mdss_disable, driver tries to access a memory which is already freed. This results in kernel panic. Fix this by ensuring proper sequence of dpu destroy and disable calls. Changes in v2: - Removed double spacings [Jeykumar] Signed-off-by: Jayant Shekhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 5 + 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index fd9c893..902bb4c 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -156,18 +156,15 @@ static void dpu_mdss_destroy(struct drm_device *dev) struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss); struct dss_module_power *mp = _mdss->mp; + pm_runtime_disable(dev->dev); _dpu_mdss_irq_domain_fini(dpu_mdss); - free_irq(platform_get_irq(pdev, 0), dpu_mdss); - msm_dss_put_clk(mp->clk_config, mp->num_clk); devm_kfree(>dev, mp->clk_config); if (dpu_mdss->mmio) devm_iounmap(>dev, dpu_mdss->mmio); dpu_mdss->mmio = NULL; - - pm_runtime_disable(dev->dev); priv->mdss = NULL; } -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
