[PATCH] ARM: dts: imx6sl: Add vivante gpu nodes
The imx6sl soc has gpu_2d and gpu_vg, no 3d support: etnaviv-gpu 220.gpu: model: GC320, revision: 5007 etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 The IP blocks are close enough to supported hardware that they "just work" with etnaviv and x11. Signed-off-by: Leonard Crestez --- arch/arm/boot/dts/imx6sl.dtsi | 20 1 file changed, 20 insertions(+) Tested by using yocto fsl community bsp built in "mainline" mode. This patch makes x11 start up and turning on drm.debug shows that the etnaviv driver is being used. I don't know if such a patch requires much more testing: all it really does is "describe the hardware". Patch is against shawguo/imx/dt, it depends on newly accepted commit 13211eec7b0e ("ARM: dts: imx6sl: Convert gpc to new bindings") This is only because of the way it references the PU power domain. diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index a6bc21433839..49a56b4fd393 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -130,10 +130,30 @@ cache-level = <2>; arm,tag-latency = <4 2 3>; arm,data-latency = <4 2 3>; }; + gpu_2d: gpu@220 { + compatible = "vivante,gc"; + reg = <0x0220 0x4000>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = < IMX6SL_CLK_MMDC_ROOT>, +< IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <_pu>; + }; + + gpu_vg: gpu@2204000 { + compatible = "vivante,gc"; + reg = <0x02204000 0x4000>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = < IMX6SL_CLK_MMDC_ROOT>, +< IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <_pu>; + }; + aips1: aips-bus@200 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x0200 0x10>; -- 2.17.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] ARM: dts: imx6sl: Add vivante gpu nodes
Am Donnerstag, den 12.07.2018, 16:37 +0300 schrieb Leonard Crestez: > The imx6sl soc has gpu_2d and gpu_vg, no 3d support: > > etnaviv-gpu 220.gpu: model: GC320, revision: 5007 > etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 > > The IP blocks are close enough to supported hardware that they "just > work" with etnaviv and x11. According to the kernel log above, they aren't just close enough, but actually the same revision as the cores on the i.MX6Q. > Signed-off-by: Leonard Crestez I think this DT is ordered by unit address, so both GPU nodes should move to the end of the dts file, right? With this fixed: Reviewed-by: Lucas Stach > > --- > arch/arm/boot/dts/imx6sl.dtsi | 20 > 1 file changed, 20 insertions(+) > > Tested by using yocto fsl community bsp built in "mainline" mode. > This > patch makes x11 start up and turning on drm.debug shows that the > etnaviv > driver is being used. > > I don't know if such a patch requires much more testing: all it > really > does is "describe the hardware". > > Patch is against shawguo/imx/dt, it depends on newly accepted > commit 13211eec7b0e ("ARM: dts: imx6sl: Convert gpc to new bindings") > This is only because of the way it references the PU power domain. > > diff --git a/arch/arm/boot/dts/imx6sl.dtsi > b/arch/arm/boot/dts/imx6sl.dtsi > index a6bc21433839..49a56b4fd393 100644 > --- a/arch/arm/boot/dts/imx6sl.dtsi > +++ b/arch/arm/boot/dts/imx6sl.dtsi > @@ -130,10 +130,30 @@ > cache-level = <2>; > arm,tag-latency = <4 2 3>; > arm,data-latency = <4 2 3>; > }; > > + gpu_2d: gpu@220 { > + compatible = "vivante,gc"; > + reg = <0x0220 0x4000>; > + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; > + clocks = < IMX6SL_CLK_MMDC_ROOT>, > + < IMX6SL_CLK_GPU2D_OVG>; > + clock-names = "bus", "core"; > + power-domains = <_pu>; > + }; > + > + gpu_vg: gpu@2204000 { > + compatible = "vivante,gc"; > + reg = <0x02204000 0x4000>; > + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; > + clocks = < IMX6SL_CLK_MMDC_ROOT>, > + < IMX6SL_CLK_GPU2D_OVG>; > + clock-names = "bus", "core"; > + power-domains = <_pu>; > + }; > + > aips1: aips-bus@200 { > compatible = "fsl,aips-bus", "simple-bus"; > #address-cells = <1>; > #size-cells = <1>; > reg = <0x0200 0x10>; ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] ARM: dts: imx6sl: Add vivante gpu nodes
Hi Leonard, On Thu, Jul 12, 2018 at 10:37 AM, Leonard Crestez wrote: > diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi > index a6bc21433839..49a56b4fd393 100644 > --- a/arch/arm/boot/dts/imx6sl.dtsi > +++ b/arch/arm/boot/dts/imx6sl.dtsi > @@ -130,10 +130,30 @@ > cache-level = <2>; > arm,tag-latency = <4 2 3>; > arm,data-latency = <4 2 3>; > }; > > + gpu_2d: gpu@220 { > + compatible = "vivante,gc"; > + reg = <0x0220 0x4000>; > + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; > + clocks = < IMX6SL_CLK_MMDC_ROOT>, > +< IMX6SL_CLK_GPU2D_OVG>; > + clock-names = "bus", "core"; > + power-domains = <_pu>; > + }; > + > + gpu_vg: gpu@2204000 { > + compatible = "vivante,gc"; > + reg = <0x02204000 0x4000>; > + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; > + clocks = < IMX6SL_CLK_MMDC_ROOT>, > +< IMX6SL_CLK_GPU2D_OVG>; > + clock-names = "bus", "core"; > + power-domains = <_pu>; > + }; > + > aips1: aips-bus@200 { We try to keep the peripherals sorted by address range in dtsi, so please put the gpu nodes below aips2. ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel