Re: [PATCH 0/3] drm: tinydrm driver for adafruit PiTFT 3.5" touchscreen
Den 25.10.2018 18.29, skrev Eric Anholt: Eric Anholt writes: I was going to start working on making the vc4 driver work with tinydrm panels, but it turned out tinydrm didn't have the panel I had previously bought. So, last night I ported the fbtft staging driver over to DRM. It seems to work (with DT at https://github.com/anholt/linux/commits/drm-misc-next-hx8357d) -- fbdev works great including rotated, and so does modetest. However, when X11 comes up at 16bpp, I get: https://photos.app.goo.gl/8tuhzPFFoDGamEfk8 If I have tinydrm set a preferred bpp of 24, X looks great. Noralf, any ideas? Also, with these patches and the format modifier patch I just sent, mesa with vc4 is now working with this driver on this branch: https://gitlab.freedesktop.org/anholt/mesa/commits/kmsro Now I wonder how we can improve performance of the SPI updates. I just remembered that tinydrm does a full flush on page flips. And if the dirtyfb ioctl is also used you end up with two flushes. This could explain bad performance. I have been waiting for the dirtyfb through atomic work to come to fruition, but nothing merged yet. That would give dirty tracking on page flips. Noralf. ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 0/3] drm: tinydrm driver for adafruit PiTFT 3.5" touchscreen
Den 26.10.2018 21.16, skrev Noralf Trønnes: Den 26.10.2018 04.30, skrev Eric Anholt: Noralf Trønnes writes: Den 25.10.2018 18.29, skrev Eric Anholt: Eric Anholt writes: I was going to start working on making the vc4 driver work with tinydrm panels, but it turned out tinydrm didn't have the panel I had previously bought. So, last night I ported the fbtft staging driver over to DRM. It seems to work (with DT at https://github.com/anholt/linux/commits/drm-misc-next-hx8357d) -- fbdev works great including rotated, and so does modetest. However, when X11 comes up at 16bpp, I get: https://photos.app.goo.gl/8tuhzPFFoDGamEfk8 If I have tinydrm set a preferred bpp of 24, X looks great. Noralf, any ideas? Also, with these patches and the format modifier patch I just sent, mesa with vc4 is now working with this driver on this branch: https://gitlab.freedesktop.org/anholt/mesa/commits/kmsro Ah, nice to see this happening! Getting hw rendering was one of the advantages I saw DRM could provide over fbdev on these displays. Little did I know how complicated graphics was outside fbdev, so I was unable to realise this myself. The current solution to get hw rendering is to have a userspace process that continously copies the framebuffer: https://github.com/tasanakorn/rpi-fbcp It's used by some of the small DIY handheld game consoles that run emulators which requires hw rendering. Now I wonder how we can improve performance of the SPI updates. At what SPI speed are you running? The datasheet for most of these display controllers list the max speed as 10MHz, but almost all of them can go faster. Some are reported going as high as 70-80MHz. That's for the pixel data transfer, not the commands. tinydrm/mipi-dbi.c sends commands at 10MHz and pixels at full speed (mipi_dbi_spi_cmd_max_speed()). Most panels I have run at 32MHz or 48MHz. I copied the DT from the adafruit tree, which has it at 32mhz. System performance seems to be limited by the copy and format conversion I think -- in particular, I wonder if we shouldn't be doing our dirty copies in our own workqueue. I haven't managed to get any really good profiling data yet, though. glxgears at 128x128 is nice and smooth, and at 480x320 it's 6fps. That's not filling 32mhz of SPI. On the other hand, I would have expected the uncached reads for the 4-to-2 swapped conversion to be able to go faster than 3.5mb/sec. If it's the uncached reads, we could at least use NEON for the copy to cached, and probably even do the whole conversion in NEON with a bit more thought. Another option: use a vc4 RCL to do RGBA to RGB565, since that will be less pressure on the bus. But then, I suppose I should just figure out what's going on that makes X11 at RGBA break, and fix that so we don't even have to do that conversion. I keep hoping there's some way we could feed output from the DISPSLAVE HVS register directly to the SPI master -- FIFO32 gets us close (two 16-bit pixels packed next to each other, leftmost in the lower 2 bytes), but the need for byte swapping (as opposed to R/B swapping) I think makes it impossible. I just did some speed tests on a 320x240 display at 3 different speeds. I also tried with byteswapping disabled. Only full updates will benefit from passing the buffer straight through to SPI. This is because partial updates are copied to a transfer buffer anyways to minimize SPI transfer time. No need to transfer things that haven't changed and a memory copy is far cheaper than a SPI transfer. SPI at 48MHz: pi@pi2835:~$ od -An -vtu4 --endian=big /sys/bus/spi/devices/spi0.0/of_node/spi-max-frequency 4800 pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@XR24 -v setting mode 320x240-0Hz@XR24 on connectors 28, crtc 30 freq: 24.87Hz freq: 24.79Hz pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 26.33Hz freq: 26.30Hz disable byteswapping: pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 28.40Hz freq: 28.43Hz SPI at 64MHz (seems to work): pi@pi2835:~$ od -An -vtu4 --endian=big /sys/bus/spi/devices/spi0.0/of_node/spi-max-frequency 6400 pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@XR24 -v setting mode 320x240-0Hz@XR24 on connectors 28, crtc 30 freq: 32.74Hz freq: 32.69Hz pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 35.44Hz freq: 35.19Hz disabled byteswapping: pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 39.29Hz freq: 39.11Hz SPI at 128MHz (not at all as garbled as I expected): pi@pi2835:~$ od -An -vtu4 --endian=big /sys/bus/spi/devices/spi0.0/of_node/spi-max-frequency 128000
Re: [PATCH 0/3] drm: tinydrm driver for adafruit PiTFT 3.5" touchscreen
Den 26.10.2018 04.30, skrev Eric Anholt: Noralf Trønnes writes: Den 25.10.2018 18.29, skrev Eric Anholt: Eric Anholt writes: I was going to start working on making the vc4 driver work with tinydrm panels, but it turned out tinydrm didn't have the panel I had previously bought. So, last night I ported the fbtft staging driver over to DRM. It seems to work (with DT at https://github.com/anholt/linux/commits/drm-misc-next-hx8357d) -- fbdev works great including rotated, and so does modetest. However, when X11 comes up at 16bpp, I get: https://photos.app.goo.gl/8tuhzPFFoDGamEfk8 If I have tinydrm set a preferred bpp of 24, X looks great. Noralf, any ideas? Also, with these patches and the format modifier patch I just sent, mesa with vc4 is now working with this driver on this branch: https://gitlab.freedesktop.org/anholt/mesa/commits/kmsro Ah, nice to see this happening! Getting hw rendering was one of the advantages I saw DRM could provide over fbdev on these displays. Little did I know how complicated graphics was outside fbdev, so I was unable to realise this myself. The current solution to get hw rendering is to have a userspace process that continously copies the framebuffer: https://github.com/tasanakorn/rpi-fbcp It's used by some of the small DIY handheld game consoles that run emulators which requires hw rendering. Now I wonder how we can improve performance of the SPI updates. At what SPI speed are you running? The datasheet for most of these display controllers list the max speed as 10MHz, but almost all of them can go faster. Some are reported going as high as 70-80MHz. That's for the pixel data transfer, not the commands. tinydrm/mipi-dbi.c sends commands at 10MHz and pixels at full speed (mipi_dbi_spi_cmd_max_speed()). Most panels I have run at 32MHz or 48MHz. I copied the DT from the adafruit tree, which has it at 32mhz. System performance seems to be limited by the copy and format conversion I think -- in particular, I wonder if we shouldn't be doing our dirty copies in our own workqueue. I haven't managed to get any really good profiling data yet, though. glxgears at 128x128 is nice and smooth, and at 480x320 it's 6fps. That's not filling 32mhz of SPI. On the other hand, I would have expected the uncached reads for the 4-to-2 swapped conversion to be able to go faster than 3.5mb/sec. If it's the uncached reads, we could at least use NEON for the copy to cached, and probably even do the whole conversion in NEON with a bit more thought. Another option: use a vc4 RCL to do RGBA to RGB565, since that will be less pressure on the bus. But then, I suppose I should just figure out what's going on that makes X11 at RGBA break, and fix that so we don't even have to do that conversion. I keep hoping there's some way we could feed output from the DISPSLAVE HVS register directly to the SPI master -- FIFO32 gets us close (two 16-bit pixels packed next to each other, leftmost in the lower 2 bytes), but the need for byte swapping (as opposed to R/B swapping) I think makes it impossible. I just did some speed tests on a 320x240 display at 3 different speeds. I also tried with byteswapping disabled. Only full updates will benefit from passing the buffer straight through to SPI. This is because partial updates are copied to a transfer buffer anyways to minimize SPI transfer time. No need to transfer things that haven't changed and a memory copy is far cheaper than a SPI transfer. SPI at 48MHz: pi@pi2835:~$ od -An -vtu4 --endian=big /sys/bus/spi/devices/spi0.0/of_node/spi-max-frequency 4800 pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@XR24 -v setting mode 320x240-0Hz@XR24 on connectors 28, crtc 30 freq: 24.87Hz freq: 24.79Hz pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 26.33Hz freq: 26.30Hz disable byteswapping: pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 28.40Hz freq: 28.43Hz SPI at 64MHz (seems to work): pi@pi2835:~$ od -An -vtu4 --endian=big /sys/bus/spi/devices/spi0.0/of_node/spi-max-frequency 6400 pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@XR24 -v setting mode 320x240-0Hz@XR24 on connectors 28, crtc 30 freq: 32.74Hz freq: 32.69Hz pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 35.44Hz freq: 35.19Hz disabled byteswapping: pi@pi2835:~$ ./libdrm/tests/modetest/modetest -M mi0283qt -s 28:320x240@RG16 -v setting mode 320x240-0Hz@RG16 on connectors 28, crtc 30 freq: 39.29Hz freq: 39.11Hz SPI at 128MHz (not at all as garbled as I expected): pi@pi2835:~$ od -An -vtu4 --endian=big /sys/bus/spi/devices/spi0.0/of_node/spi-max-frequency 12800 pi@pi2835:~$ ./libdrm/tests/modetest/modetest
Re: [PATCH 0/3] drm: tinydrm driver for adafruit PiTFT 3.5" touchscreen
Noralf Trønnes writes: > Den 25.10.2018 18.29, skrev Eric Anholt: >> Eric Anholt writes: >> >>> I was going to start working on making the vc4 driver work with >>> tinydrm panels, but it turned out tinydrm didn't have the panel I had >>> previously bought. So, last night I ported the fbtft staging >>> driver over to DRM. >>> >>> It seems to work (with DT at >>> https://github.com/anholt/linux/commits/drm-misc-next-hx8357d) -- >>> fbdev works great including rotated, and so does modetest. However, >>> when X11 comes up at 16bpp, I get: >>> >>> https://photos.app.goo.gl/8tuhzPFFoDGamEfk8 >>> >>> If I have tinydrm set a preferred bpp of 24, X looks great. Noralf, >>> any ideas? >> Also, with these patches and the format modifier patch I just sent, mesa >> with vc4 is now working with this driver on this branch: >> >> https://gitlab.freedesktop.org/anholt/mesa/commits/kmsro > > Ah, nice to see this happening! > Getting hw rendering was one of the advantages I saw DRM could provide > over fbdev on these displays. Little did I know how complicated graphics > was outside fbdev, so I was unable to realise this myself. > > The current solution to get hw rendering is to have a userspace process > that continously copies the framebuffer: > https://github.com/tasanakorn/rpi-fbcp > > It's used by some of the small DIY handheld game consoles that run > emulators which requires hw rendering. > >> Now I wonder how we can improve performance of the SPI updates. > > At what SPI speed are you running? The datasheet for most of these > display controllers list the max speed as 10MHz, but almost all of them > can go faster. Some are reported going as high as 70-80MHz. That's for > the pixel data transfer, not the commands. tinydrm/mipi-dbi.c sends > commands at 10MHz and pixels at full speed (mipi_dbi_spi_cmd_max_speed()). > Most panels I have run at 32MHz or 48MHz. I copied the DT from the adafruit tree, which has it at 32mhz. System performance seems to be limited by the copy and format conversion I think -- in particular, I wonder if we shouldn't be doing our dirty copies in our own workqueue. I haven't managed to get any really good profiling data yet, though. glxgears at 128x128 is nice and smooth, and at 480x320 it's 6fps. That's not filling 32mhz of SPI. On the other hand, I would have expected the uncached reads for the 4-to-2 swapped conversion to be able to go faster than 3.5mb/sec. If it's the uncached reads, we could at least use NEON for the copy to cached, and probably even do the whole conversion in NEON with a bit more thought. Another option: use a vc4 RCL to do RGBA to RGB565, since that will be less pressure on the bus. But then, I suppose I should just figure out what's going on that makes X11 at RGBA break, and fix that so we don't even have to do that conversion. I keep hoping there's some way we could feed output from the DISPSLAVE HVS register directly to the SPI master -- FIFO32 gets us close (two 16-bit pixels packed next to each other, leftmost in the lower 2 bytes), but the need for byte swapping (as opposed to R/B swapping) I think makes it impossible. > Almost all the time is spent in the SPI transfer, so every hz counts. On > the Pi there's byte swapping because the DMA capable SPI controller can't > do 16-bit (tinydrm_swab16()). If I remember correctly this has negligible > impact on performance. > > The SPI controller/driver on the Pi has some restrictions on the speeds > to choose from because the divisor has to be a multiple of two > (bcm2835_spi_transfer_one()). That's weird. My specs say CDIV must be a *power* of two, with lower values rounded down. I guess that means we might be running things fast, not slow, though (and at 32mhz out of 250, we should be getting the same CDIV). signature.asc Description: PGP signature ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 0/3] drm: tinydrm driver for adafruit PiTFT 3.5" touchscreen
Den 25.10.2018 18.29, skrev Eric Anholt: Eric Anholt writes: I was going to start working on making the vc4 driver work with tinydrm panels, but it turned out tinydrm didn't have the panel I had previously bought. So, last night I ported the fbtft staging driver over to DRM. It seems to work (with DT at https://github.com/anholt/linux/commits/drm-misc-next-hx8357d) -- fbdev works great including rotated, and so does modetest. However, when X11 comes up at 16bpp, I get: https://photos.app.goo.gl/8tuhzPFFoDGamEfk8 If I have tinydrm set a preferred bpp of 24, X looks great. Noralf, any ideas? Also, with these patches and the format modifier patch I just sent, mesa with vc4 is now working with this driver on this branch: https://gitlab.freedesktop.org/anholt/mesa/commits/kmsro Ah, nice to see this happening! Getting hw rendering was one of the advantages I saw DRM could provide over fbdev on these displays. Little did I know how complicated graphics was outside fbdev, so I was unable to realise this myself. The current solution to get hw rendering is to have a userspace process that continously copies the framebuffer: https://github.com/tasanakorn/rpi-fbcp It's used by some of the small DIY handheld game consoles that run emulators which requires hw rendering. Now I wonder how we can improve performance of the SPI updates. At what SPI speed are you running? The datasheet for most of these display controllers list the max speed as 10MHz, but almost all of them can go faster. Some are reported going as high as 70-80MHz. That's for the pixel data transfer, not the commands. tinydrm/mipi-dbi.c sends commands at 10MHz and pixels at full speed (mipi_dbi_spi_cmd_max_speed()). Most panels I have run at 32MHz or 48MHz. Almost all the time is spent in the SPI transfer, so every hz counts. On the Pi there's byte swapping because the DMA capable SPI controller can't do 16-bit (tinydrm_swab16()). If I remember correctly this has negligible impact on performance. The SPI controller/driver on the Pi has some restrictions on the speeds to choose from because the divisor has to be a multiple of two (bcm2835_spi_transfer_one()). A full update on a 320x480 RGB565 panel is 262.5kB, so it's a lot to push over SPI. A 2.8" 320x240 panel is more suitable for video fps, because of the lower resolution. I'll look at the patches during the weekend. Noralf. ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 0/3] drm: tinydrm driver for adafruit PiTFT 3.5" touchscreen
Eric Anholt writes: > I was going to start working on making the vc4 driver work with > tinydrm panels, but it turned out tinydrm didn't have the panel I had > previously bought. So, last night I ported the fbtft staging > driver over to DRM. > > It seems to work (with DT at > https://github.com/anholt/linux/commits/drm-misc-next-hx8357d) -- > fbdev works great including rotated, and so does modetest. However, > when X11 comes up at 16bpp, I get: > > https://photos.app.goo.gl/8tuhzPFFoDGamEfk8 > > If I have tinydrm set a preferred bpp of 24, X looks great. Noralf, > any ideas? Also, with these patches and the format modifier patch I just sent, mesa with vc4 is now working with this driver on this branch: https://gitlab.freedesktop.org/anholt/mesa/commits/kmsro Now I wonder how we can improve performance of the SPI updates. signature.asc Description: PGP signature ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH 0/3] drm: tinydrm driver for adafruit PiTFT 3.5" touchscreen
I was going to start working on making the vc4 driver work with tinydrm panels, but it turned out tinydrm didn't have the panel I had previously bought. So, last night I ported the fbtft staging driver over to DRM. It seems to work (with DT at https://github.com/anholt/linux/commits/drm-misc-next-hx8357d) -- fbdev works great including rotated, and so does modetest. However, when X11 comes up at 16bpp, I get: https://photos.app.goo.gl/8tuhzPFFoDGamEfk8 If I have tinydrm set a preferred bpp of 24, X looks great. Noralf, any ideas? Eric Anholt (3): dt-bindings: new binding for Himax HX8357D display panels drm: Add an hx8367d tinydrm driver. drm/tinydrm: Fix setting of the column/page end addresses. .../bindings/display/himax,hx8357d.txt| 25 ++ drivers/gpu/drm/tinydrm/Kconfig | 11 + drivers/gpu/drm/tinydrm/Makefile | 1 + drivers/gpu/drm/tinydrm/hx8357d.c | 262 ++ drivers/gpu/drm/tinydrm/hx8357d.h | 71 + drivers/gpu/drm/tinydrm/mipi-dbi.c| 4 +- 6 files changed, 372 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/himax,hx8357d.txt create mode 100644 drivers/gpu/drm/tinydrm/hx8357d.c create mode 100644 drivers/gpu/drm/tinydrm/hx8357d.h -- 2.19.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel