Re: [PATCH v11] drm/bridge: add it6505 driver
On Fri, 14 Jan 2022 at 10:29, allen wrote: > > This adds support for the iTE IT6505. > This device can convert DPI signal to DP output. > > From: Allen Chen > Tested-by: Hsin-yi Wang > Signed-off-by: Hermes Wu > Signed-off-by: Allen Chen > --- > v10 -> v11 : remove drm_bridge_new_crtc_state > --- > drivers/gpu/drm/bridge/Kconfig |8 + > drivers/gpu/drm/bridge/Makefile |1 + > drivers/gpu/drm/bridge/ite-it6505.c | 3352 +++ > 3 files changed, 3361 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/ite-it6505.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index 61db5a66b4934..f667fdd87a2cb 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -74,6 +74,14 @@ config DRM_DISPLAY_CONNECTOR > on ARM-based platforms. Saying Y here when this driver is not needed > will not cause any issue. > > +config DRM_ITE_IT6505 > +tristate "ITE IT6505 DisplayPort bridge" > +depends on OF > +select DRM_KMS_HELPER > +select EXTCON > +help > + ITE IT6505 DisplayPort bridge chip driver. > + > config DRM_LONTIUM_LT8912B > tristate "Lontium LT8912B DSI/HDMI bridge" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index f2c73683cfcb7..425844c304953 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o > obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > +obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o > obj-$(CONFIG_DRM_LONTIUM_LT9611UXC) += lontium-lt9611uxc.o > diff --git a/drivers/gpu/drm/bridge/ite-it6505.c > b/drivers/gpu/drm/bridge/ite-it6505.c > new file mode 100644 > index 0..f47cf134e7900 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/ite-it6505.c > @@ -0,0 +1,3352 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +/* > + * Copyright (c) 2020, The Linux Foundation. All rights reserved. > + */ > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > + > +#include > +#include > +#include > +#include > +#include This include has changed location, I manually fixed this in this in the patch. > +#include > +#include > +#include > +#include > + > +#include > + > +#define REG_IC_VER 0x04 > + > +#define REG_RESET_CTRL 0x05 > +#define VIDEO_RESET BIT(0) > +#define AUDIO_RESET BIT(1) > +#define ALL_LOGIC_RESET BIT(2) > +#define AUX_RESET BIT(3) > +#define HDCP_RESET BIT(4) > + > +#define INT_STATUS_01 0x06 > +#define INT_MASK_01 0x09 > +#define INT_HPD_CHANGE 0 > +#define INT_RECEIVE_HPD_IRQ 1 > +#define INT_SCDT_CHANGE 2 > +#define INT_HDCP_FAIL 3 > +#define INT_HDCP_DONE 4 > +#define BIT_OFFSET(x) (((x) - INT_STATUS_01) * BITS_PER_BYTE) > +#define BIT_INT_HPD INT_HPD_CHANGE > +#define BIT_INT_HPD_IRQ INT_RECEIVE_HPD_IRQ > +#define BIT_INT_SCDT INT_SCDT_CHANGE > +#define BIT_INT_HDCP_FAIL INT_HDCP_FAIL > +#define BIT_INT_HDCP_DONE INT_HDCP_DONE > + > +#define INT_STATUS_02 0x07 > +#define INT_MASK_02 0x0A > +#define INT_AUX_CMD_FAIL 0 > +#define INT_HDCP_KSV_CHECK 1 > +#define INT_AUDIO_FIFO_ERROR 2 > +#define BIT_INT_AUX_CMD_FAIL (BIT_OFFSET(0x07) + INT_AUX_CMD_FAIL) > +#define BIT_INT_HDCP_KSV_CHECK (BIT_OFFSET(0x07) + INT_HDCP_KSV_CHECK) > +#define BIT_INT_AUDIO_FIFO_ERROR (BIT_OFFSET(0x07) + INT_AUDIO_FIFO_ERROR) > + > +#define INT_STATUS_03 0x08 > +#define INT_MASK_03 0x0B > +#define INT_LINK_TRAIN_FAIL 4 > +#define INT_VID_FIFO_ERROR 5 > +#define INT_IO_LATCH_FIFO_OVERFLOW 7 > +#define BIT_INT_LINK_TRAIN_FAIL (BIT_OFFSET(0x08) + INT_LINK_TRAIN_FAIL) > +#define BIT_INT_VID_FIFO_ERROR (BIT_OFFSET(0x08) + INT_VID_FIFO_ERROR) > +#define BIT_INT_IO_FIFO_OVERFLOW (BIT_OFFSET(0x08) + > INT_IO_LATCH_FIFO_OVERFLOW) > + > +#define REG_SYSTEM_STS 0x0D > +#define INT_STS BIT(0) > +#define HPD_STS BIT(1) > +#define VIDEO_STB BIT(2) > + > +#define REG_LINK_TRAIN_STS 0x0E > +#define LINK_STATE_CR BIT(2) > +#define LINK_STATE_EQ BIT(3) > +#define LINK_STATE_NORP BIT(4) > + > +#define REG_BANK_SEL 0x0F > +#define REG_CLK_CTRL0 0x10 > +#define M_PCLK_DELAY 0x03 > + > +#define REG_AUX_OPT 0x11 > +#define AUX_AUTO_RST BIT(0) > +#define AUX_FIX_FREQ BIT(3) > + > +#define REG_DATA_CTRL0 0x12 > +#define VIDEO_LATCH_EDGE BIT(4) > +#define ENABLE_PCLK_COUNTER BIT(7) > + > +#define REG_PCLK_COUNTER_VALUE 0x13 > + > +#define REG_501_FIFO_CTRL 0x15 > +#define RST_501_FIFO BIT(1) > + > +#define REG_TRAIN_CTRL0 0x16 > +#define FORCE_LBR BIT(0) > +#de
Re: [PATCH v11] drm/bridge: add it6505 driver
Il 31/01/22 19:36, Robert Foss ha scritto:
On Mon, 31 Jan 2022 at 17:55, Hsin-Yi Wang wrote:
On Tue, Feb 1, 2022 at 12:37 AM Robert Foss wrote:
On Thu, 20 Jan 2022 at 16:25, AngeloGioacchino Del Regno
wrote:
Il 14/01/22 10:14, allen ha scritto:
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Tested-by: Hsin-yi Wang
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
v10 -> v11 : remove drm_bridge_new_crtc_state
---
drivers/gpu/drm/bridge/Kconfig |8 +
drivers/gpu/drm/bridge/Makefile |1 +
drivers/gpu/drm/bridge/ite-it6505.c | 3352 +++
3 files changed, 3361 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/ite-it6505.c
...snip...
+static const struct of_device_id it6505_of_match[] = {
+ { .compatible = "ite,it6505" },
+ { }
+};
If you want to have a DT compatible and DT properties, you have to also add
dt-bindings (yaml) for this driver, otherwise, any SoC/device DT will fail
the dt binding check So, please, add that.
Let me second this. A dt-binding is needed for this driver to be
complete, it functions as both documentation and a way to test the DTS
that use this device, so it is really important.
The binding seems to be accepted before the driver:
https://elixir.bootlin.com/linux/v5.16.4/source/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
I completely missed that. In that case we're only missing the
reviewed-by tag from someone.
You have mine... the intention was to give a Reviewed-by, not a Acked-by - I'm
sorry for that, I was sending more than one email and the wrong tag slipped
through.
So, please change my Acked-by tag to
Reviewed-by: AngeloGioacchino Del Regno
For the driver by itself, though:
Acked-by: AngeloGioacchino Del Regno
+
+static struct i2c_driver it6505_i2c_driver = {
+ .driver = {
+ .name = "it6505",
+ .of_match_table = it6505_of_match,
+ .pm = &it6505_bridge_pm_ops,
+ },
+ .probe = it6505_i2c_probe,
+ .remove = it6505_i2c_remove,
+ .shutdown = it6505_shutdown,
+ .id_table = it6505_id,
+};
+
+module_i2c_driver(it6505_i2c_driver);
+
+MODULE_AUTHOR("Allen Chen ");
+MODULE_DESCRIPTION("IT6505 DisplayPort Transmitter driver");
+MODULE_LICENSE("GPL v2");
Re: [PATCH v11] drm/bridge: add it6505 driver
On Mon, 31 Jan 2022 at 17:55, Hsin-Yi Wang wrote:
>
> On Tue, Feb 1, 2022 at 12:37 AM Robert Foss wrote:
> >
> > On Thu, 20 Jan 2022 at 16:25, AngeloGioacchino Del Regno
> > wrote:
> > >
> > > Il 14/01/22 10:14, allen ha scritto:
> > > > This adds support for the iTE IT6505.
> > > > This device can convert DPI signal to DP output.
> > > >
> > > > From: Allen Chen
> > > > Tested-by: Hsin-yi Wang
> > > > Signed-off-by: Hermes Wu
> > > > Signed-off-by: Allen Chen
> > > > ---
> > > > v10 -> v11 : remove drm_bridge_new_crtc_state
> > > > ---
> > > > drivers/gpu/drm/bridge/Kconfig |8 +
> > > > drivers/gpu/drm/bridge/Makefile |1 +
> > > > drivers/gpu/drm/bridge/ite-it6505.c | 3352 +++
> > > > 3 files changed, 3361 insertions(+)
> > > > create mode 100644 drivers/gpu/drm/bridge/ite-it6505.c
> > > >
> > >
> > > ...snip...
> > >
> > > > +static const struct of_device_id it6505_of_match[] = {
> > > > + { .compatible = "ite,it6505" },
> > > > + { }
> > > > +};
> > >
> > > If you want to have a DT compatible and DT properties, you have to also
> > > add
> > > dt-bindings (yaml) for this driver, otherwise, any SoC/device DT will fail
> > > the dt binding check So, please, add that.
> >
> > Let me second this. A dt-binding is needed for this driver to be
> > complete, it functions as both documentation and a way to test the DTS
> > that use this device, so it is really important.
> >
> The binding seems to be accepted before the driver:
> https://elixir.bootlin.com/linux/v5.16.4/source/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
I completely missed that. In that case we're only missing the
reviewed-by tag from someone.
>
> > >
> > > For the driver by itself, though:
> > >
> > > Acked-by: AngeloGioacchino Del Regno
> > >
> > >
> > > > +
> > > > +static struct i2c_driver it6505_i2c_driver = {
> > > > + .driver = {
> > > > + .name = "it6505",
> > > > + .of_match_table = it6505_of_match,
> > > > + .pm = &it6505_bridge_pm_ops,
> > > > + },
> > > > + .probe = it6505_i2c_probe,
> > > > + .remove = it6505_i2c_remove,
> > > > + .shutdown = it6505_shutdown,
> > > > + .id_table = it6505_id,
> > > > +};
> > > > +
> > > > +module_i2c_driver(it6505_i2c_driver);
> > > > +
> > > > +MODULE_AUTHOR("Allen Chen ");
> > > > +MODULE_DESCRIPTION("IT6505 DisplayPort Transmitter driver");
> > > > +MODULE_LICENSE("GPL v2");
> > > >
> > >
Re: [PATCH v11] drm/bridge: add it6505 driver
On Tue, Feb 1, 2022 at 12:37 AM Robert Foss wrote:
>
> On Thu, 20 Jan 2022 at 16:25, AngeloGioacchino Del Regno
> wrote:
> >
> > Il 14/01/22 10:14, allen ha scritto:
> > > This adds support for the iTE IT6505.
> > > This device can convert DPI signal to DP output.
> > >
> > > From: Allen Chen
> > > Tested-by: Hsin-yi Wang
> > > Signed-off-by: Hermes Wu
> > > Signed-off-by: Allen Chen
> > > ---
> > > v10 -> v11 : remove drm_bridge_new_crtc_state
> > > ---
> > > drivers/gpu/drm/bridge/Kconfig |8 +
> > > drivers/gpu/drm/bridge/Makefile |1 +
> > > drivers/gpu/drm/bridge/ite-it6505.c | 3352 +++
> > > 3 files changed, 3361 insertions(+)
> > > create mode 100644 drivers/gpu/drm/bridge/ite-it6505.c
> > >
> >
> > ...snip...
> >
> > > +static const struct of_device_id it6505_of_match[] = {
> > > + { .compatible = "ite,it6505" },
> > > + { }
> > > +};
> >
> > If you want to have a DT compatible and DT properties, you have to also add
> > dt-bindings (yaml) for this driver, otherwise, any SoC/device DT will fail
> > the dt binding check So, please, add that.
>
> Let me second this. A dt-binding is needed for this driver to be
> complete, it functions as both documentation and a way to test the DTS
> that use this device, so it is really important.
>
The binding seems to be accepted before the driver:
https://elixir.bootlin.com/linux/v5.16.4/source/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> >
> > For the driver by itself, though:
> >
> > Acked-by: AngeloGioacchino Del Regno
> >
> >
> > > +
> > > +static struct i2c_driver it6505_i2c_driver = {
> > > + .driver = {
> > > + .name = "it6505",
> > > + .of_match_table = it6505_of_match,
> > > + .pm = &it6505_bridge_pm_ops,
> > > + },
> > > + .probe = it6505_i2c_probe,
> > > + .remove = it6505_i2c_remove,
> > > + .shutdown = it6505_shutdown,
> > > + .id_table = it6505_id,
> > > +};
> > > +
> > > +module_i2c_driver(it6505_i2c_driver);
> > > +
> > > +MODULE_AUTHOR("Allen Chen ");
> > > +MODULE_DESCRIPTION("IT6505 DisplayPort Transmitter driver");
> > > +MODULE_LICENSE("GPL v2");
> > >
> >
Re: [PATCH v11] drm/bridge: add it6505 driver
On Thu, 20 Jan 2022 at 16:25, AngeloGioacchino Del Regno
wrote:
>
> Il 14/01/22 10:14, allen ha scritto:
> > This adds support for the iTE IT6505.
> > This device can convert DPI signal to DP output.
> >
> > From: Allen Chen
> > Tested-by: Hsin-yi Wang
> > Signed-off-by: Hermes Wu
> > Signed-off-by: Allen Chen
> > ---
> > v10 -> v11 : remove drm_bridge_new_crtc_state
> > ---
> > drivers/gpu/drm/bridge/Kconfig |8 +
> > drivers/gpu/drm/bridge/Makefile |1 +
> > drivers/gpu/drm/bridge/ite-it6505.c | 3352 +++
> > 3 files changed, 3361 insertions(+)
> > create mode 100644 drivers/gpu/drm/bridge/ite-it6505.c
> >
>
> ...snip...
>
> > +static const struct of_device_id it6505_of_match[] = {
> > + { .compatible = "ite,it6505" },
> > + { }
> > +};
>
> If you want to have a DT compatible and DT properties, you have to also add
> dt-bindings (yaml) for this driver, otherwise, any SoC/device DT will fail
> the dt binding check So, please, add that.
Let me second this. A dt-binding is needed for this driver to be
complete, it functions as both documentation and a way to test the DTS
that use this device, so it is really important.
>
> For the driver by itself, though:
>
> Acked-by: AngeloGioacchino Del Regno
>
> > +
> > +static struct i2c_driver it6505_i2c_driver = {
> > + .driver = {
> > + .name = "it6505",
> > + .of_match_table = it6505_of_match,
> > + .pm = &it6505_bridge_pm_ops,
> > + },
> > + .probe = it6505_i2c_probe,
> > + .remove = it6505_i2c_remove,
> > + .shutdown = it6505_shutdown,
> > + .id_table = it6505_id,
> > +};
> > +
> > +module_i2c_driver(it6505_i2c_driver);
> > +
> > +MODULE_AUTHOR("Allen Chen ");
> > +MODULE_DESCRIPTION("IT6505 DisplayPort Transmitter driver");
> > +MODULE_LICENSE("GPL v2");
> >
>
Re: [PATCH v11] drm/bridge: add it6505 driver
Il 14/01/22 10:14, allen ha scritto:
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Tested-by: Hsin-yi Wang
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
v10 -> v11 : remove drm_bridge_new_crtc_state
---
drivers/gpu/drm/bridge/Kconfig |8 +
drivers/gpu/drm/bridge/Makefile |1 +
drivers/gpu/drm/bridge/ite-it6505.c | 3352 +++
3 files changed, 3361 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/ite-it6505.c
...snip...
+static const struct of_device_id it6505_of_match[] = {
+ { .compatible = "ite,it6505" },
+ { }
+};
If you want to have a DT compatible and DT properties, you have to also add
dt-bindings (yaml) for this driver, otherwise, any SoC/device DT will fail
the dt binding check So, please, add that.
For the driver by itself, though:
Acked-by: AngeloGioacchino Del Regno
+
+static struct i2c_driver it6505_i2c_driver = {
+ .driver = {
+ .name = "it6505",
+ .of_match_table = it6505_of_match,
+ .pm = &it6505_bridge_pm_ops,
+ },
+ .probe = it6505_i2c_probe,
+ .remove = it6505_i2c_remove,
+ .shutdown = it6505_shutdown,
+ .id_table = it6505_id,
+};
+
+module_i2c_driver(it6505_i2c_driver);
+
+MODULE_AUTHOR("Allen Chen ");
+MODULE_DESCRIPTION("IT6505 DisplayPort Transmitter driver");
+MODULE_LICENSE("GPL v2");
[PATCH v11] drm/bridge: add it6505 driver
This adds support for the iTE IT6505. This device can convert DPI signal to DP output. From: Allen Chen Tested-by: Hsin-yi Wang Signed-off-by: Hermes Wu Signed-off-by: Allen Chen --- v10 -> v11 : remove drm_bridge_new_crtc_state --- drivers/gpu/drm/bridge/Kconfig |8 + drivers/gpu/drm/bridge/Makefile |1 + drivers/gpu/drm/bridge/ite-it6505.c | 3352 +++ 3 files changed, 3361 insertions(+) create mode 100644 drivers/gpu/drm/bridge/ite-it6505.c diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 61db5a66b4934..f667fdd87a2cb 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -74,6 +74,14 @@ config DRM_DISPLAY_CONNECTOR on ARM-based platforms. Saying Y here when this driver is not needed will not cause any issue. +config DRM_ITE_IT6505 +tristate "ITE IT6505 DisplayPort bridge" +depends on OF +select DRM_KMS_HELPER +select EXTCON +help + ITE IT6505 DisplayPort bridge chip driver. + config DRM_LONTIUM_LT8912B tristate "Lontium LT8912B DSI/HDMI bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index f2c73683cfcb7..425844c304953 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o +obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o obj-$(CONFIG_DRM_LONTIUM_LT9611UXC) += lontium-lt9611uxc.o diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c new file mode 100644 index 0..f47cf134e7900 --- /dev/null +++ b/drivers/gpu/drm/bridge/ite-it6505.c @@ -0,0 +1,3352 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define REG_IC_VER 0x04 + +#define REG_RESET_CTRL 0x05 +#define VIDEO_RESET BIT(0) +#define AUDIO_RESET BIT(1) +#define ALL_LOGIC_RESET BIT(2) +#define AUX_RESET BIT(3) +#define HDCP_RESET BIT(4) + +#define INT_STATUS_01 0x06 +#define INT_MASK_01 0x09 +#define INT_HPD_CHANGE 0 +#define INT_RECEIVE_HPD_IRQ 1 +#define INT_SCDT_CHANGE 2 +#define INT_HDCP_FAIL 3 +#define INT_HDCP_DONE 4 +#define BIT_OFFSET(x) (((x) - INT_STATUS_01) * BITS_PER_BYTE) +#define BIT_INT_HPD INT_HPD_CHANGE +#define BIT_INT_HPD_IRQ INT_RECEIVE_HPD_IRQ +#define BIT_INT_SCDT INT_SCDT_CHANGE +#define BIT_INT_HDCP_FAIL INT_HDCP_FAIL +#define BIT_INT_HDCP_DONE INT_HDCP_DONE + +#define INT_STATUS_02 0x07 +#define INT_MASK_02 0x0A +#define INT_AUX_CMD_FAIL 0 +#define INT_HDCP_KSV_CHECK 1 +#define INT_AUDIO_FIFO_ERROR 2 +#define BIT_INT_AUX_CMD_FAIL (BIT_OFFSET(0x07) + INT_AUX_CMD_FAIL) +#define BIT_INT_HDCP_KSV_CHECK (BIT_OFFSET(0x07) + INT_HDCP_KSV_CHECK) +#define BIT_INT_AUDIO_FIFO_ERROR (BIT_OFFSET(0x07) + INT_AUDIO_FIFO_ERROR) + +#define INT_STATUS_03 0x08 +#define INT_MASK_03 0x0B +#define INT_LINK_TRAIN_FAIL 4 +#define INT_VID_FIFO_ERROR 5 +#define INT_IO_LATCH_FIFO_OVERFLOW 7 +#define BIT_INT_LINK_TRAIN_FAIL (BIT_OFFSET(0x08) + INT_LINK_TRAIN_FAIL) +#define BIT_INT_VID_FIFO_ERROR (BIT_OFFSET(0x08) + INT_VID_FIFO_ERROR) +#define BIT_INT_IO_FIFO_OVERFLOW (BIT_OFFSET(0x08) + INT_IO_LATCH_FIFO_OVERFLOW) + +#define REG_SYSTEM_STS 0x0D +#define INT_STS BIT(0) +#define HPD_STS BIT(1) +#define VIDEO_STB BIT(2) + +#define REG_LINK_TRAIN_STS 0x0E +#define LINK_STATE_CR BIT(2) +#define LINK_STATE_EQ BIT(3) +#define LINK_STATE_NORP BIT(4) + +#define REG_BANK_SEL 0x0F +#define REG_CLK_CTRL0 0x10 +#define M_PCLK_DELAY 0x03 + +#define REG_AUX_OPT 0x11 +#define AUX_AUTO_RST BIT(0) +#define AUX_FIX_FREQ BIT(3) + +#define REG_DATA_CTRL0 0x12 +#define VIDEO_LATCH_EDGE BIT(4) +#define ENABLE_PCLK_COUNTER BIT(7) + +#define REG_PCLK_COUNTER_VALUE 0x13 + +#define REG_501_FIFO_CTRL 0x15 +#define RST_501_FIFO BIT(1) + +#define REG_TRAIN_CTRL0 0x16 +#define FORCE_LBR BIT(0) +#define LANE_COUNT_MASK 0x06 +#define LANE_SWAP BIT(3) +#define SPREAD_AMP_5 BIT(4) +#define FORCE_CR_DONE BIT(5) +#define FORCE_EQ_DONE BIT(6) + +#define REG_TRAIN_CTRL1 0x17 +#define AUTO_TRAIN BIT(0) +#define MANUAL_TRAIN BIT(1) +#define FORCE_RETRAIN BIT(2) + +#define REG_AUX_CTRL 0x23 +#define CLR_EDID_FIFO BIT(0) +#define AUX_USER_MODE BIT(1) +#define AUX_NO_SEGMENT_WR BIT(6) +#define AUX_EN_FIFO_READ BIT(7) + +#define REG_AUX_ADR_0_7 0x2
