Re: [EXT] Re: [PATCH v2 1/2] dt-bindings: display: panel: Add support for Raydium RM67191 panel
On Mi, 2019-06-19 at 10:21 -0300, Fabio Estevam wrote: > Caution: EXT Email > > Hi Robert, > > On Tue, Jun 18, 2019 at 10:33 AM Robert Chiras > wrote: > > > > > +Optional properties: > > +- reset-gpios: a GPIO spec for the RST_B GPIO pin > > +- pinctrl-0phandle to the pin settings for the reset > > pin > > +- width-mm:physical panel width [mm] > > +- height-mm: physical panel height [mm] > > +- display-timings: timings for the connected panel according > > to [1] > Still not convinced we need the 'display-timings' property, even as > an > optional property. My understanding is that passing display timings > in > the devicetree is not encouraged. > > Last time you said you need to pass ''display-timings' to workaround > the problem of connecting this panel to mx8m DCSS or eLCDIF. > > The panel timings come from the LCD manufacturer and it is agnostic > to > what display controller interface it is connected to. > > So I suggest making sure the timings passed in the driver are correct > as per the vendor datasheet. If they are correct and one specific > interface is not able to drive it, then probably it is a bug in this > specific display controller interface or in the SoC clock driver. I understand. I will remove the display-timings from dt and also from driver. Currently, this panel works in this form with both LCDIF and DCSS on our 8M SoC so, as you said, probably the issue we were seeing in our tree was coming from elsewhere.
Re: [PATCH v2 1/2] dt-bindings: display: panel: Add support for Raydium RM67191 panel
Hi Robert, On Tue, Jun 18, 2019 at 10:33 AM Robert Chiras wrote: > +Optional properties: > +- reset-gpios: a GPIO spec for the RST_B GPIO pin > +- pinctrl-0phandle to the pin settings for the reset pin > +- width-mm:physical panel width [mm] > +- height-mm: physical panel height [mm] > +- display-timings: timings for the connected panel according to [1] Still not convinced we need the 'display-timings' property, even as an optional property. My understanding is that passing display timings in the devicetree is not encouraged. Last time you said you need to pass ''display-timings' to workaround the problem of connecting this panel to mx8m DCSS or eLCDIF. The panel timings come from the LCD manufacturer and it is agnostic to what display controller interface it is connected to. So I suggest making sure the timings passed in the driver are correct as per the vendor datasheet. If they are correct and one specific interface is not able to drive it, then probably it is a bug in this specific display controller interface or in the SoC clock driver.
Re: [PATCH v2 1/2] dt-bindings: display: panel: Add support for Raydium RM67191 panel
Hi Robert.
Thanks for the contribution.
On Tue, Jun 18, 2019 at 04:30:45PM +0300, Robert Chiras wrote:
> Add dt-bindings documentation for Raydium RM67191 DSI panel.
>
> Signed-off-by: Robert Chiras
> ---
> .../bindings/display/panel/raydium,rm67191.txt | 43
> ++
> 1 file changed, 43 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> new file mode 100644
> index 000..0952610
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> @@ -0,0 +1,43 @@
> +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
> +
> +Required properties:
> +- compatible:"raydium,rm67191"
> +- reg: virtual channel for MIPI-DSI protocol
> + must be <0>
> +- dsi-lanes: number of DSI lanes to be used
> + must be <3> or <4>
> +- port: input port node with endpoint definition as
> + defined in Documentation/devicetree/bindings/graph.txt;
> + the input port should be connected to a MIPI-DSI device
> + driver
> +
> +Optional properties:
> +- reset-gpios: a GPIO spec for the RST_B GPIO pin
> +- pinctrl-0 phandle to the pin settings for the reset pin
pinctrl is not included in bindings, they are implicit.
> +- width-mm: physical panel width [mm]
> +- height-mm: physical panel height [mm]
Please refer to panel-common.txt for the above.
> +- display-timings: timings for the connected panel according to [1]
> +- video-mode:0 - burst-mode
> + 1 - non-burst with sync event
> + 2 - non-burst with sync pulse
> +
> +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
> +
> +Example:
> +
> + panel@0 {
> + compatible = "raydium,rm67191";
> + reg = <0>;
> + pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
> + pinctrl-names = "default";
> + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> + dsi-lanes = <4>;
> + width-mm = <68>;
> + height-mm = <121>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&mipi_out>;
> + };
> + };
> + };
With the above fixed:
Signed-off-by: Sam Ravnborg
Note: You need r-b from DT maintainer before we can apply it.
Sam
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v2 1/2] dt-bindings: display: panel: Add support for Raydium RM67191 panel
Add dt-bindings documentation for Raydium RM67191 DSI panel.
Signed-off-by: Robert Chiras
---
.../bindings/display/panel/raydium,rm67191.txt | 43 ++
1 file changed, 43 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
diff --git
a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
new file mode 100644
index 000..0952610
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
@@ -0,0 +1,43 @@
+Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+Required properties:
+- compatible: "raydium,rm67191"
+- reg: virtual channel for MIPI-DSI protocol
+ must be <0>
+- dsi-lanes: number of DSI lanes to be used
+ must be <3> or <4>
+- port:input port node with endpoint definition as
+ defined in Documentation/devicetree/bindings/graph.txt;
+ the input port should be connected to a MIPI-DSI device
+ driver
+
+Optional properties:
+- reset-gpios: a GPIO spec for the RST_B GPIO pin
+- pinctrl-0phandle to the pin settings for the reset pin
+- width-mm:physical panel width [mm]
+- height-mm: physical panel height [mm]
+- display-timings: timings for the connected panel according to [1]
+- video-mode: 0 - burst-mode
+ 1 - non-burst with sync event
+ 2 - non-burst with sync pulse
+
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
+
+Example:
+
+ panel@0 {
+ compatible = "raydium,rm67191";
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ dsi-lanes = <4>;
+ width-mm = <68>;
+ height-mm = <121>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_out>;
+ };
+ };
+ };
--
2.7.4
