Hi Sam,
Thank you for the patch.
On Fri, Jul 03, 2020 at 09:24:03PM +0200, Sam Ravnborg wrote:
> Prepare the bridge driver for chained operation by adding
> support for the detect operation.
>
> Signed-off-by: Sam Ravnborg
> Cc: Andrzej Hajda
> Cc: Neil Armstrong
> Cc: Laurent Pinchart
> Cc: Jonas Karlman
> Cc: Jernej Skrabec
> ---
> drivers/gpu/drm/bridge/tc358767.c | 16 +---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358767.c
> b/drivers/gpu/drm/bridge/tc358767.c
> index 08d483664258..85973ae728db 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -1353,10 +1353,9 @@ static const struct drm_connector_helper_funcs
> tc_connector_helper_funcs = {
> .get_modes = tc_connector_get_modes,
> };
>
> -static enum drm_connector_status tc_connector_detect(struct drm_connector
> *connector,
> - bool force)
> +static enum drm_connector_status tc_bridge_detect(struct drm_bridge *bridge)
> {
> - struct tc_data *tc = connector_to_tc(connector);
> + struct tc_data *tc = bridge_to_tc(bridge);
> bool conn;
> u32 val;
> int ret;
> @@ -1380,6 +1379,14 @@ static enum drm_connector_status
> tc_connector_detect(struct drm_connector *conne
> return connector_status_disconnected;
> }
>
> +static enum drm_connector_status
> +tc_connector_detect(struct drm_connector *connector, bool force)
> +{
> + struct tc_data *tc = connector_to_tc(connector);
> +
> + return tc_bridge_detect(>bridge);
> +}
> +
> static const struct drm_connector_funcs tc_connector_funcs = {
> .detect = tc_connector_detect,
> .fill_modes = drm_helper_probe_single_connector_modes,
> @@ -1444,6 +1451,7 @@ static const struct drm_bridge_funcs tc_bridge_funcs = {
> .enable = tc_bridge_enable,
> .disable = tc_bridge_disable,
> .mode_fixup = tc_bridge_mode_fixup,
> + .detect = tc_bridge_detect,
> };
>
> static bool tc_readable_reg(struct device *dev, unsigned int reg)
> @@ -1677,6 +1685,8 @@ static int tc_probe(struct i2c_client *client, const
> struct i2c_device_id *id)
> return ret;
>
> tc->bridge.funcs = _bridge_funcs;
> + tc->bridge.ops = DRM_BRIDGE_OP_DETECT;
I think you should set DRM_BRIDGE_OP_DETECT only when tc->hpd_pin is
valid. I would also move the if (tc->hpd_pin < 0) case from
tc_bridge_detect to +tc_connector_detect.
> +
> tc->bridge.of_node = dev->of_node;
> drm_bridge_add(>bridge);
>
--
Regards,
Laurent Pinchart
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
