Re: [PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm
Hi Benoit,
On Tue, Sep 24, 2013 at 11:29:51AM +0200, Benoit Cousson wrote:
> Hi Benoit,
>
> On 03/09/2013 16:55, Benoit Parrot wrote:
> >Hi,
> >
> >I have not received any feedback on this patch.
> >It has been pending since the end of June (first post).
> >Can I get an estimate when it will be included/accepted?
>
> It looks good to me beside a minor comment below.
>
> Could you just rebase it on my lastest
> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
> for_3.13/dts branch because it conflicts with the cleanup done by
> Javier.
>
I was going to rebase it to your for_3.13/dts branch, but Joel Frenandez has
already included this patch as part of his most recent submission.
(http://marc.info/?l=devicetree&m=138014654925217&w=2) so I guess there is no
need to duplicate the work now.
Let me know if this causes any issue.
Thanks,
Benoit
> >
> >On Fri, Aug 23, 2013 at 11:13:56AM -0500, Benoit Parrot wrote:
> >>Add LCDC device node in DT for am33xx
> >>Add LCDC and Panel info in DT for am335x-evm
> >>
> >>Changes in v3:
> >>- rebase to 3.11-rc6
> >>
> >>Changes in v2:
> >>- remove redundant/unnecessary SoC specific setting in the board dts
> >>
> >>Signed-off-by: Benoit Parrot
> >>---
> >> arch/arm/boot/dts/am335x-evm.dts | 72
> >> ++
> >> arch/arm/boot/dts/am33xx.dtsi|9 +
> >> 2 files changed, 81 insertions(+)
> >>
> >>diff --git a/arch/arm/boot/dts/am335x-evm.dts
> >>b/arch/arm/boot/dts/am335x-evm.dts
> >>index 3aee1a4..b0703f1 100644
> >>--- a/arch/arm/boot/dts/am335x-evm.dts
> >>+++ b/arch/arm/boot/dts/am335x-evm.dts
> >>@@ -149,6 +149,40 @@
> >>0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> >>>;
> >>};
> >>+
> >>+ lcd_pins_s0: lcd_pins_s0 {
> >>+ pinctrl-single,pins = <
> >>+ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT
> >>| MODE1 */
> >>+ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT
> >>| MODE1 */
> >>+ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT
> >>| MODE1 */
> >>+ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT
> >>| MODE1 */
> >>+ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT
> >>| MODE1 */
> >>+ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT
> >>| MODE1 */
> >>+ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT
> >>| MODE1 */
> >>+ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT
> >>| MODE1 */
> >>+ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT
> >>| MODE0 */
> >>+ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT
> >>| MODE0 */
> >>+ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT
> >>| MODE0 */
> >>+ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT
> >>| MODE0 */
> >>+ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT
> >>| MODE0 */
> >>+ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT
> >>| MODE0 */
> >>+ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT
> >>| MODE0 */
> >>+ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT
> >>| MODE0 */
> >>+ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT
> >>| MODE0 */
> >>+ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT
> >>| MODE0 */
> >>+ 0xc8 0x00 /* lcd_data10.lcd_data10,
> >>OUTPUT | MODE0 */
> >>+ 0xcc 0x00 /* lcd_data11.lcd_data11,
> >>OUTPUT | MODE0 */
> >>+ 0xd0 0x00 /* lcd_data12.lcd_data12,
> >>OUTPUT | MODE0 */
> >>+ 0xd4 0x00 /* lcd_data13.lcd_data13,
> >>OUTPUT | MODE0 */
> >>+ 0xd8 0x00 /* lcd_data14.lcd_data14,
> >>OUTPUT | MODE0 */
> >>+ 0xdc 0x00 /* lcd_data15.lcd_data15,
> >>OUTPUT | MODE0 */
> >>+ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT
> >>| MODE0 */
> >>+ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT
> >>| MODE0 */
> >>+ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT |
> >>MODE0 */
> >>+ 0xec 0x00 /*
> >>lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
> >>+ >;
> >>+ };
> >>+
> >>};
> >>
> >>ocp {
> >>@@ -311,6 +345,10 @@
> >>};
> >>};
> >>};
> >>+
> >>+ lcdc: lcdc@4830e000 {
> >>+ status = "okay";
> >>+ };
> >>};
> >>
> >>vbat: fixedregulator@0 {
> >>@@ -374,6 +412,40 @@
> >>brightness-levels = <0 51 53 56 62 75 101 152 255>;
> >
Re: [PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm
Hi Benoit,
On 03/09/2013 16:55, Benoit Parrot wrote:
Hi,
I have not received any feedback on this patch.
It has been pending since the end of June (first post).
Can I get an estimate when it will be included/accepted?
It looks good to me beside a minor comment below.
Could you just rebase it on my lastest
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.13/dts branch because it conflicts with the cleanup done by Javier.
On Fri, Aug 23, 2013 at 11:13:56AM -0500, Benoit Parrot wrote:
Add LCDC device node in DT for am33xx
Add LCDC and Panel info in DT for am335x-evm
Changes in v3:
- rebase to 3.11-rc6
Changes in v2:
- remove redundant/unnecessary SoC specific setting in the board dts
Signed-off-by: Benoit Parrot
---
arch/arm/boot/dts/am335x-evm.dts | 72 ++
arch/arm/boot/dts/am33xx.dtsi|9 +
2 files changed, 81 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3aee1a4..b0703f1 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -149,6 +149,40 @@
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
+
+ lcd_pins_s0: lcd_pins_s0 {
+ pinctrl-single,pins = <
+ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT
| MODE1 */
+ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT
| MODE1 */
+ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT
| MODE1 */
+ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT
| MODE1 */
+ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT
| MODE1 */
+ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT
| MODE1 */
+ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT
| MODE1 */
+ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT
| MODE1 */
+ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT
| MODE0 */
+ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT
| MODE0 */
+ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT
| MODE0 */
+ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT
| MODE0 */
+ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT
| MODE0 */
+ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT
| MODE0 */
+ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT
| MODE0 */
+ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT
| MODE0 */
+ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT
| MODE0 */
+ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT
| MODE0 */
+ 0xc8 0x00 /* lcd_data10.lcd_data10,
OUTPUT | MODE0 */
+ 0xcc 0x00 /* lcd_data11.lcd_data11,
OUTPUT | MODE0 */
+ 0xd0 0x00 /* lcd_data12.lcd_data12,
OUTPUT | MODE0 */
+ 0xd4 0x00 /* lcd_data13.lcd_data13,
OUTPUT | MODE0 */
+ 0xd8 0x00 /* lcd_data14.lcd_data14,
OUTPUT | MODE0 */
+ 0xdc 0x00 /* lcd_data15.lcd_data15,
OUTPUT | MODE0 */
+ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT
| MODE0 */
+ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT
| MODE0 */
+ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT |
MODE0 */
+ 0xec 0x00 /*
lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+ >;
+ };
+
};
ocp {
@@ -311,6 +345,10 @@
};
};
};
+
+ lcdc: lcdc@4830e000 {
+ status = "okay";
+ };
};
vbat: fixedregulator@0 {
@@ -374,6 +412,40 @@
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
+
+ panel {
+ compatible = "ti,tilcdc,panel";
Nit: There are a lots of TI here :-)
Could you just name it: ti,lcdc,panel ?
Thanks,
Benoit
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm
Hi,
I have not received any feedback on this patch.
It has been pending since the end of June (first post).
Can I get an estimate when it will be included/accepted?
Thanks,
Benoit
On Fri, Aug 23, 2013 at 11:13:56AM -0500, Benoit Parrot wrote:
> Add LCDC device node in DT for am33xx
> Add LCDC and Panel info in DT for am335x-evm
>
> Changes in v3:
> - rebase to 3.11-rc6
>
> Changes in v2:
> - remove redundant/unnecessary SoC specific setting in the board dts
>
> Signed-off-by: Benoit Parrot
> ---
> arch/arm/boot/dts/am335x-evm.dts | 72
> ++
> arch/arm/boot/dts/am33xx.dtsi|9 +
> 2 files changed, 81 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts
> b/arch/arm/boot/dts/am335x-evm.dts
> index 3aee1a4..b0703f1 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -149,6 +149,40 @@
> 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> >;
> };
> +
> + lcd_pins_s0: lcd_pins_s0 {
> + pinctrl-single,pins = <
> + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT
> | MODE1 */
> + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT
> | MODE1 */
> + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT
> | MODE1 */
> + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT
> | MODE1 */
> + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT
> | MODE1 */
> + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT
> | MODE1 */
> + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT
> | MODE1 */
> + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT
> | MODE1 */
> + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT
> | MODE0 */
> + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT
> | MODE0 */
> + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT
> | MODE0 */
> + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT
> | MODE0 */
> + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT
> | MODE0 */
> + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT
> | MODE0 */
> + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT
> | MODE0 */
> + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT
> | MODE0 */
> + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT
> | MODE0 */
> + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT
> | MODE0 */
> + 0xc8 0x00 /* lcd_data10.lcd_data10,
> OUTPUT | MODE0 */
> + 0xcc 0x00 /* lcd_data11.lcd_data11,
> OUTPUT | MODE0 */
> + 0xd0 0x00 /* lcd_data12.lcd_data12,
> OUTPUT | MODE0 */
> + 0xd4 0x00 /* lcd_data13.lcd_data13,
> OUTPUT | MODE0 */
> + 0xd8 0x00 /* lcd_data14.lcd_data14,
> OUTPUT | MODE0 */
> + 0xdc 0x00 /* lcd_data15.lcd_data15,
> OUTPUT | MODE0 */
> + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT
> | MODE0 */
> + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT
> | MODE0 */
> + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT |
> MODE0 */
> + 0xec 0x00 /*
> lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
> + >;
> + };
> +
> };
>
> ocp {
> @@ -311,6 +345,10 @@
> };
> };
> };
> +
> + lcdc: lcdc@4830e000 {
> + status = "okay";
> + };
> };
>
> vbat: fixedregulator@0 {
> @@ -374,6 +412,40 @@
> brightness-levels = <0 51 53 56 62 75 101 152 255>;
> default-brightness-level = <8>;
> };
> +
> + panel {
> + compatible = "ti,tilcdc,panel";
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&lcd_pins_s0>;
> + panel-info {
> + ac-bias = <255>;
> + ac-bias-intrpt= <0>;
> + dma-burst-sz = <16>;
> + bpp = <32>;
> + fdd = <0x80>;
> + sync-edge = <0>;
> + sync-ctrl = <1>;
> + raster-order = <0>;
> + fifo-th = <0>;
> + };
> +
> + display-timings {
> + 800x480p62 {
> +
[PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm
Add LCDC device node in DT for am33xx
Add LCDC and Panel info in DT for am335x-evm
Changes in v3:
- rebase to 3.11-rc6
Changes in v2:
- remove redundant/unnecessary SoC specific setting in the board dts
Signed-off-by: Benoit Parrot
---
arch/arm/boot/dts/am335x-evm.dts | 72 ++
arch/arm/boot/dts/am33xx.dtsi|9 +
2 files changed, 81 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3aee1a4..b0703f1 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -149,6 +149,40 @@
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
+
+ lcd_pins_s0: lcd_pins_s0 {
+ pinctrl-single,pins = <
+ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT
| MODE1 */
+ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT
| MODE1 */
+ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT
| MODE1 */
+ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT
| MODE1 */
+ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT
| MODE1 */
+ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT
| MODE1 */
+ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT
| MODE1 */
+ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT
| MODE1 */
+ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT
| MODE0 */
+ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT
| MODE0 */
+ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT
| MODE0 */
+ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT
| MODE0 */
+ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT
| MODE0 */
+ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT
| MODE0 */
+ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT
| MODE0 */
+ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT
| MODE0 */
+ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT
| MODE0 */
+ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT
| MODE0 */
+ 0xc8 0x00 /* lcd_data10.lcd_data10,
OUTPUT | MODE0 */
+ 0xcc 0x00 /* lcd_data11.lcd_data11,
OUTPUT | MODE0 */
+ 0xd0 0x00 /* lcd_data12.lcd_data12,
OUTPUT | MODE0 */
+ 0xd4 0x00 /* lcd_data13.lcd_data13,
OUTPUT | MODE0 */
+ 0xd8 0x00 /* lcd_data14.lcd_data14,
OUTPUT | MODE0 */
+ 0xdc 0x00 /* lcd_data15.lcd_data15,
OUTPUT | MODE0 */
+ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT
| MODE0 */
+ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT
| MODE0 */
+ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT |
MODE0 */
+ 0xec 0x00 /*
lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+ >;
+ };
+
};
ocp {
@@ -311,6 +345,10 @@
};
};
};
+
+ lcdc: lcdc at 4830e000 {
+ status = "okay";
+ };
};
vbat: fixedregulator at 0 {
@@ -374,6 +412,40 @@
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_s0>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt= <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ display-timings {
+ 800x480p62 {
+ clock-frequency = <3000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <39>;
+ hback-porch = <39>;
+ hsync-len = <47>;
+ vback-porch = <29>;
+
[PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm
Add LCDC device node in DT for am33xx
Add LCDC and Panel info in DT for am335x-evm
Changes in v3:
- rebase to 3.11-rc6
Changes in v2:
- remove redundant/unnecessary SoC specific setting in the board dts
Signed-off-by: Benoit Parrot
---
arch/arm/boot/dts/am335x-evm.dts | 72 ++
arch/arm/boot/dts/am33xx.dtsi|9 +
2 files changed, 81 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3aee1a4..b0703f1 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -149,6 +149,40 @@
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
+
+ lcd_pins_s0: lcd_pins_s0 {
+ pinctrl-single,pins = <
+ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT
| MODE1 */
+ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT
| MODE1 */
+ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT
| MODE1 */
+ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT
| MODE1 */
+ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT
| MODE1 */
+ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT
| MODE1 */
+ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT
| MODE1 */
+ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT
| MODE1 */
+ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT
| MODE0 */
+ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT
| MODE0 */
+ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT
| MODE0 */
+ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT
| MODE0 */
+ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT
| MODE0 */
+ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT
| MODE0 */
+ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT
| MODE0 */
+ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT
| MODE0 */
+ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT
| MODE0 */
+ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT
| MODE0 */
+ 0xc8 0x00 /* lcd_data10.lcd_data10,
OUTPUT | MODE0 */
+ 0xcc 0x00 /* lcd_data11.lcd_data11,
OUTPUT | MODE0 */
+ 0xd0 0x00 /* lcd_data12.lcd_data12,
OUTPUT | MODE0 */
+ 0xd4 0x00 /* lcd_data13.lcd_data13,
OUTPUT | MODE0 */
+ 0xd8 0x00 /* lcd_data14.lcd_data14,
OUTPUT | MODE0 */
+ 0xdc 0x00 /* lcd_data15.lcd_data15,
OUTPUT | MODE0 */
+ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT
| MODE0 */
+ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT
| MODE0 */
+ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT |
MODE0 */
+ 0xec 0x00 /*
lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+ >;
+ };
+
};
ocp {
@@ -311,6 +345,10 @@
};
};
};
+
+ lcdc: lcdc@4830e000 {
+ status = "okay";
+ };
};
vbat: fixedregulator@0 {
@@ -374,6 +412,40 @@
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_s0>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt= <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ display-timings {
+ 800x480p62 {
+ clock-frequency = <3000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <39>;
+ hback-porch = <39>;
+ hsync-len = <47>;
+ vback-porch = <29>;
+
