[PATCH v3 1/2] dt-bindings: tc358767: add DT documentation
Am Sonntag, den 17.07.2016, 13:55 +0530 schrieb Archit Taneja: > > On 7/17/2016 4:04 AM, Rob Herring wrote: > > On Wed, Jul 13, 2016 at 09:07:10AM +0200, Philipp Zabel wrote: > >> Add DT binding documentation for the Toshiba TC358767 eDP bridge. > >> > >> Signed-off-by: Philipp Zabel > >> --- > >> .../bindings/display/bridge/toshiba,tc358767.txt | 51 > >> ++ > >> 1 file changed, 51 insertions(+) > >> create mode 100644 > >> Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > >> > >> diff --git > >> a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > >> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > >> new file mode 100644 > >> index 000..05ada28 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > >> @@ -0,0 +1,51 @@ > >> +Toshiba TC358767 eDP bridge bindings > >> + > >> +Required properties: > >> + - compatible: "toshiba,tc358767" > >> + - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap > >> pins > >> + - clock-names: should be "ref" > >> + - clocks: OF device-tree clock specification for refclk input. The > >> reference > >> + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. > >> + > >> +Optional properties: > >> + - shutdown-gpios: OF device-tree gpio specification for SD pin > >> + (active high shutdown input) > >> + - reset-gpios: OF device-tree gpio specification for RSTX pin > >> +(active low system reset) > >> + - ports: the ports node can contain video interface port nodes to connect > >> + to a DPI/DSI source and to an eDP/DP sink according to [1][2]: > >> +- port at 0: DSI input port > >> +- port at 1: DPI input port > >> +- port at 2: eDP/DP output port > >> + > >> +[1]: Documentation/devicetree/bindings/graph.txt > >> +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt > >> + > >> +Example: > >> + edp-bridge at 68 { > >> + compatible = "toshiba,tc358767"; > >> + reg = <0x68>; > >> + shutdown-gpios = < 23 GPIO_ACTIVE_HIGH>; > >> + reset-gpios = < 24 GPIO_ACTIVE_LOW>; > >> + clock-names = "ref"; > >> + clocks = <_refclk>; > >> + > >> + ports { > > > > You are missing #size-cells and #address-cells here, otherwise: > > > > Acked-by: Rob Herring > > Thanks, I'll fix it up before sending a pull request. Thank you for the fixup. regards Philipp
[PATCH v3 1/2] dt-bindings: tc358767: add DT documentation
On 7/17/2016 4:04 AM, Rob Herring wrote: > On Wed, Jul 13, 2016 at 09:07:10AM +0200, Philipp Zabel wrote: >> Add DT binding documentation for the Toshiba TC358767 eDP bridge. >> >> Signed-off-by: Philipp Zabel >> --- >> .../bindings/display/bridge/toshiba,tc358767.txt | 51 >> ++ >> 1 file changed, 51 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt >> >> diff --git >> a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt >> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt >> new file mode 100644 >> index 000..05ada28 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt >> @@ -0,0 +1,51 @@ >> +Toshiba TC358767 eDP bridge bindings >> + >> +Required properties: >> + - compatible: "toshiba,tc358767" >> + - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins >> + - clock-names: should be "ref" >> + - clocks: OF device-tree clock specification for refclk input. The >> reference >> + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. >> + >> +Optional properties: >> + - shutdown-gpios: OF device-tree gpio specification for SD pin >> + (active high shutdown input) >> + - reset-gpios: OF device-tree gpio specification for RSTX pin >> +(active low system reset) >> + - ports: the ports node can contain video interface port nodes to connect >> + to a DPI/DSI source and to an eDP/DP sink according to [1][2]: >> +- port at 0: DSI input port >> +- port at 1: DPI input port >> +- port at 2: eDP/DP output port >> + >> +[1]: Documentation/devicetree/bindings/graph.txt >> +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt >> + >> +Example: >> +edp-bridge at 68 { >> +compatible = "toshiba,tc358767"; >> +reg = <0x68>; >> +shutdown-gpios = < 23 GPIO_ACTIVE_HIGH>; >> +reset-gpios = < 24 GPIO_ACTIVE_LOW>; >> +clock-names = "ref"; >> +clocks = <_refclk>; >> + >> +ports { > > You are missing #size-cells and #address-cells here, otherwise: > > Acked-by: Rob Herring Thanks, I'll fix it up before sending a pull request. Archit > >> +port at 1 { >> +reg = <1>; >> + >> +bridge_in: endpoint { >> +remote-endpoint = <_out>; >> +}; >> +}; >> + >> +port at 2 { >> +reg = <2>; >> + >> +bridge_out: endpoint { >> +remote-endpoint = <_in>; >> +}; >> +}; >> +}; >> +}; >> + >> -- >> 2.8.1 >> -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
[PATCH v3 1/2] dt-bindings: tc358767: add DT documentation
On Wed, Jul 13, 2016 at 09:07:10AM +0200, Philipp Zabel wrote: > Add DT binding documentation for the Toshiba TC358767 eDP bridge. > > Signed-off-by: Philipp Zabel > --- > .../bindings/display/bridge/toshiba,tc358767.txt | 51 > ++ > 1 file changed, 51 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > > diff --git > a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > new file mode 100644 > index 000..05ada28 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt > @@ -0,0 +1,51 @@ > +Toshiba TC358767 eDP bridge bindings > + > +Required properties: > + - compatible: "toshiba,tc358767" > + - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins > + - clock-names: should be "ref" > + - clocks: OF device-tree clock specification for refclk input. The reference > + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. > + > +Optional properties: > + - shutdown-gpios: OF device-tree gpio specification for SD pin > + (active high shutdown input) > + - reset-gpios: OF device-tree gpio specification for RSTX pin > +(active low system reset) > + - ports: the ports node can contain video interface port nodes to connect > + to a DPI/DSI source and to an eDP/DP sink according to [1][2]: > +- port at 0: DSI input port > +- port at 1: DPI input port > +- port at 2: eDP/DP output port > + > +[1]: Documentation/devicetree/bindings/graph.txt > +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt > + > +Example: > + edp-bridge at 68 { > + compatible = "toshiba,tc358767"; > + reg = <0x68>; > + shutdown-gpios = < 23 GPIO_ACTIVE_HIGH>; > + reset-gpios = < 24 GPIO_ACTIVE_LOW>; > + clock-names = "ref"; > + clocks = <_refclk>; > + > + ports { You are missing #size-cells and #address-cells here, otherwise: Acked-by: Rob Herring > + port at 1 { > + reg = <1>; > + > + bridge_in: endpoint { > + remote-endpoint = <_out>; > + }; > + }; > + > + port at 2 { > + reg = <2>; > + > + bridge_out: endpoint { > + remote-endpoint = <_in>; > + }; > + }; > + }; > + }; > + > -- > 2.8.1 >
[PATCH v3 1/2] dt-bindings: tc358767: add DT documentation
Add DT binding documentation for the Toshiba TC358767 eDP bridge. Signed-off-by: Philipp Zabel --- .../bindings/display/bridge/toshiba,tc358767.txt | 51 ++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt new file mode 100644 index 000..05ada28 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt @@ -0,0 +1,51 @@ +Toshiba TC358767 eDP bridge bindings + +Required properties: + - compatible: "toshiba,tc358767" + - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins + - clock-names: should be "ref" + - clocks: OF device-tree clock specification for refclk input. The reference + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. + +Optional properties: + - shutdown-gpios: OF device-tree gpio specification for SD pin + (active high shutdown input) + - reset-gpios: OF device-tree gpio specification for RSTX pin +(active low system reset) + - ports: the ports node can contain video interface port nodes to connect + to a DPI/DSI source and to an eDP/DP sink according to [1][2]: +- port at 0: DSI input port +- port at 1: DPI input port +- port at 2: eDP/DP output port + +[1]: Documentation/devicetree/bindings/graph.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + edp-bridge at 68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = < 23 GPIO_ACTIVE_HIGH>; + reset-gpios = < 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <_refclk>; + + ports { + port at 1 { + reg = <1>; + + bridge_in: endpoint { + remote-endpoint = <_out>; + }; + }; + + port at 2 { + reg = <2>; + + bridge_out: endpoint { + remote-endpoint = <_in>; + }; + }; + }; + }; + -- 2.8.1