[PATCH v4 1/6] drm/i915/skl: Add support for the SAGV, fix underrun hangs
Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Reviewed-by: Matt Roper Signed-off-by: Lyude Cc: Daniel Vetter Cc: Ville Syrjälä Cc: stable at vger.kernel.org --- drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/i915_reg.h | 5 ++ drivers/gpu/drm/i915/intel_display.c | 19 +++ drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_pm.c | 105 +++ 5 files changed, 133 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9f655e2..1f6fe8c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1962,6 +1962,8 @@ struct drm_i915_private { struct i915_suspend_saved_registers regfile; struct vlv_s0ix_state vlv_s0ix_state; + bool skl_sagv_enabled; + struct { /* * Raw watermark latency values: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9397dde..89d146f 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7166,6 +7166,11 @@ enum { #define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17 #define DISPLAY_IPS_CONTROL 0x19 #define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A +#define GEN9_PCODE_SAGV_CONTROL 0x21 +#define GEN9_SAGV_DISABLE 0x0 +#define GEN9_SAGV_LOW_FREQ 0x1 +#define GEN9_SAGV_HIGH_FREQ0x2 +#define GEN9_SAGV_DYNAMIC_FREQ 0x3 #define GEN6_PCODE_DATA_MMIO(0x138128) #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 78beb7e..b80c051 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4562,9 +4562,12 @@ static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state) { struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc); struct drm_atomic_state *old_state = old_crtc_state->base.state; + struct intel_atomic_state *old_intel_state = + to_intel_atomic_state(old_state); struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc->base.state); struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); struct drm_plane *primary = crtc->base.primary; struct drm_plane_state *old_pri_state = drm_atomic_get_existing_plane_state(old_state
[PATCH v4 1/6] drm/i915/skl: Add support for the SAGV, fix underrun hangs
On Tue, Jul 26, 2016 at 01:34:37PM -0400, Lyude wrote: > Since the watermark calculations for Skylake are still broken, we're apt > to hitting underruns very easily under multi-monitor configurations. > While it would be lovely if this was fixed, it's not. Another problem > that's been coming from this however, is the mysterious issue of > underruns causing full system hangs. An easy way to reproduce this with > a skylake system: > > - Get a laptop with a skylake GPU, and hook up two external monitors to > it > - Move the cursor from the built-in LCD to one of the external displays > as quickly as you can > - You'll get a few pipe underruns, and eventually the entire system will > just freeze. > > After doing a lot of investigation and reading through the bspec, I > found the existence of the SAGV, which is responsible for adjusting the > system agent voltage and clock frequencies depending on how much power > we need. According to the bspec: > > "The display engine access to system memory is blocked during the > adjustment time. SAGV defaults to enabled. Software must use the > GT-driver pcode mailbox to disable SAGV when the display engine is not > able to tolerate the blocking time." > > The rest of the bspec goes on to explain that software can simply leave > the SAGV enabled, and disable it when we use interlaced pipes/have more > then one pipe active. > > Sure enough, with this patchset the system hangs resulting from pipe > underruns on Skylake have completely vanished on my T460s. Additionally, > the bspec mentions turning off the SAGV with more then one pipe enabled > as a workaround for display underruns. While this patch doesn't entirely > fix that, it looks like it does improve the situation a little bit so > it's likely this is going to be required to make watermarks on Skylake > fully functional. > > Changes since v4: > - Use is_power_of_2 against active_crtcs to check whether we have > 1 >pipe enabled > - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 >enabled > - Call skl_sagv_enable/disable() from pre/post-plane updates > Changes since v3: > - Use time_before() to compare timeout to jiffies > Changes since v2: > - Really apply minor style nitpicks to patch this time > Changes since v1: > - Added comments about this probably being one of the requirements to >fixing Skylake's watermark issues > - Minor style nitpicks from Matt Roper > - Disable these functions on Broxton, since it doesn't have an SAGV > > Reviewed-by: Matt Roper > Signed-off-by: Lyude > Cc: Daniel Vetter > Cc: Ville Syrjälä > Cc: stable at vger.kernel.org > --- > drivers/gpu/drm/i915/i915_drv.h | 2 + > drivers/gpu/drm/i915/i915_reg.h | 5 ++ > drivers/gpu/drm/i915/intel_display.c | 19 +++ > drivers/gpu/drm/i915/intel_drv.h | 2 + > drivers/gpu/drm/i915/intel_pm.c | 105 > +++ > 5 files changed, 133 insertions(+) > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h > index 9f655e2..1f6fe8c 100644 > --- a/drivers/gpu/drm/i915/i915_drv.h > +++ b/drivers/gpu/drm/i915/i915_drv.h > @@ -1962,6 +1962,8 @@ struct drm_i915_private { > struct i915_suspend_saved_registers regfile; > struct vlv_s0ix_state vlv_s0ix_state; > > + bool skl_sagv_enabled; > + > struct { > /* >* Raw watermark latency values: > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index 9397dde..89d146f 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -7166,6 +7166,11 @@ enum { > #define HSW_PCODE_DE_WRITE_FREQ_REQ0x17 > #define DISPLAY_IPS_CONTROL0x19 > #defineHSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A > +#define GEN9_PCODE_SAGV_CONTROL0x21 > +#define GEN9_SAGV_DISABLE0x0 > +#define GEN9_SAGV_LOW_FREQ 0x1 > +#define GEN9_SAGV_HIGH_FREQ 0x2 > +#define GEN9_SAGV_DYNAMIC_FREQ 0x3 > #define GEN6_PCODE_DATA _MMIO(0x138128) > #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 > #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 > diff --git a/drivers/gpu/drm/i915/intel_display.c > b/drivers/gpu/drm/i915/intel_display.c > index 78beb7e..b80c051 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -4562,9 +4562,12 @@ static void intel_post_plane_update(struct > intel_crtc_state *old_crtc_state) > { > struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc); > struct drm_atomic_state *old_state = old_crtc_state->base.state; > + struct intel_atomic_state *old_intel_state = > + to_intel_atomic_state(old_state); > struct intel_crtc_state *pipe_config = > to_intel_crtc_state(crtc->base.state); >