Re: [PATCH v4 3/5] dt-bindings: display: ti, j721e-dss: Add dt-schema yaml binding
Hi, On Thu, Dec 19, 2019 at 04:01:58PM +0200, Jyri Sarha wrote: > On 19/12/2019 10:38, Maxime Ripard wrote: > > On Thu, Dec 19, 2019 at 10:23:17AM +0200, Jyri Sarha wrote: > >> Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone > >> Display SubSystem. > >> > >> Version history: > >> > >> v2: no change > >> > >> v3: - reg-names: "wp" -> "wb" > >> - Add ports node > >> - Add includes to dts example > >> - reindent dts example > >> > >> v4: - Add descriptions to reg, clocks, and interrups properties > >> - Remove minItems when its value is the same as maxItems value > >> > >> Signed-off-by: Jyri Sarha > >> --- > >> .../bindings/display/ti/ti,j721e-dss.yaml | 209 ++ > >> 1 file changed, 209 insertions(+) > >> create mode 100644 > >> Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > >> > >> diff --git > >> a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > >> b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > >> new file mode 100644 > >> index ..cd68c4294f9a > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > >> @@ -0,0 +1,209 @@ > >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > >> +# Copyright 2019 Texas Instruments Incorporated > >> +%YAML 1.2 > >> +--- > >> +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#; > >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#; > >> + > >> +title: Texas Instruments J721E Display Subsystem > >> + > >> +maintainers: > >> + - Jyri Sarha > >> + - Tomi Valkeinen > >> + > >> +description: | > >> + The J721E TI Keystone Display SubSystem with four output ports and > >> + four video planes. There is two full video planes and two "lite > >> + planes" without scaling support. The video ports can be connected to > >> + the SoC's DPI pins or to integrated display bridges on the SoC. > >> + > >> +properties: > >> + compatible: > >> +const: ti,j721e-dss > >> + > >> + reg: > >> +maxItems: 17 > >> +description: | > >> + Addresses to each DSS memory region described in the SoC's TRM. > >> + The reg-names refer to memory regions as follows: > >> + reg-names: Region Name in TRM: Description: > >> + common_m DSS0_DISPC_0_COMMON_M DSS Master common register area > >> + common_s0 DSS0_DISPC_0_COMMON_SO DSS Shared common register area 0 > >> + common_s1 DSS0_DISPC_0_COMMON_S1 DSS Shared common register area 1 > >> + common_s2 DSS0_DISPC_0_COMMON_S2 DSS Shared common register area 2 > >> + vidl1 DSS0_VIDL1 VIDL1 light video plane 1 > >> + vidl2 DSS0_VIDL2 VIDL2 light video plane 2 > >> + vid1 DSS0_VID1 VID1 video plane 1 > >> + vid2 DSS0_VID2 VID1 video plane 2 > >> + ovr1 DSS0_OVR1 OVR1 overlay manager for vp1 > >> + ovr2 DSS0_OVR2 OVR2 overlay manager for vp2 > >> + ovr3 DSS0_OVR3 OVR1 overlay manager for vp3 > >> + ovr4 DSS0_OVR4 OVR2 overlay manager for vp4 > >> + vp1DSS0_VP1VP1 video port 1 > >> + vp2DSS0_VP2VP1 video port 2 > >> + vp3DSS0_VP3VP1 video port 3 > >> + vp4DSS0_VP4VP1 video port 4 > >> + wp DSS0_WB Write Back registers > > > > I guess it applies to all your schemas in that patch series, but you > > could just do something like > > > > reg: > > items: > > - description: DSS Master common register area > > - description: DSS Shared common register area 0 > > - description: DSS Shared common register area 1 > > > > Ok, thanks. I was not sure if you can do that (still a newbie with > yaml). What do you think about Peter Ujfalusi's suggestion of putting > the descriptions to reg-names (and clock-names and interrupt-names)? > e.g. something like this: > > reg-names: > items: > - const: common_m > - description: DSS Master common register area > - const: common_s0 > - description: DSS Master common register area No, you can't really intertwin them like this, this would mean that you would expect twice the number of items. You could do something like this: reg-names: items: - const: common_m description: DSS Master common register area - const: common_s0 description: DSS Master common register area But on a more fundamental level, the register area is stored under regs, while reg-names is just a label for that area, so having the description under reg, and the labels under reg-names makes more sense (well, to me at least :)) Maxiem signature.asc Description: PGP signature ___ dri-devel mailing list dri-devel@lists.freedesktop.org
Re: [PATCH v4 3/5] dt-bindings: display: ti, j721e-dss: Add dt-schema yaml binding
Hi, On Thu, Dec 19, 2019 at 10:23:17AM +0200, Jyri Sarha wrote: > Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone > Display SubSystem. > > Version history: > > v2: no change > > v3: - reg-names: "wp" -> "wb" > - Add ports node > - Add includes to dts example > - reindent dts example > > v4: - Add descriptions to reg, clocks, and interrups properties > - Remove minItems when its value is the same as maxItems value > > Signed-off-by: Jyri Sarha > --- > .../bindings/display/ti/ti,j721e-dss.yaml | 209 ++ > 1 file changed, 209 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > > diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > new file mode 100644 > index ..cd68c4294f9a > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > @@ -0,0 +1,209 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 Texas Instruments Incorporated > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#; > + > +title: Texas Instruments J721E Display Subsystem > + > +maintainers: > + - Jyri Sarha > + - Tomi Valkeinen > + > +description: | > + The J721E TI Keystone Display SubSystem with four output ports and > + four video planes. There is two full video planes and two "lite > + planes" without scaling support. The video ports can be connected to > + the SoC's DPI pins or to integrated display bridges on the SoC. > + > +properties: > + compatible: > +const: ti,j721e-dss > + > + reg: > +maxItems: 17 > +description: | > + Addresses to each DSS memory region described in the SoC's TRM. > + The reg-names refer to memory regions as follows: > + reg-names: Region Name in TRM: Description: > + common_m DSS0_DISPC_0_COMMON_M DSS Master common register area > + common_s0 DSS0_DISPC_0_COMMON_SO DSS Shared common register area 0 > + common_s1 DSS0_DISPC_0_COMMON_S1 DSS Shared common register area 1 > + common_s2 DSS0_DISPC_0_COMMON_S2 DSS Shared common register area 2 > + vidl1 DSS0_VIDL1 VIDL1 light video plane 1 > + vidl2 DSS0_VIDL2 VIDL2 light video plane 2 > + vid1 DSS0_VID1 VID1 video plane 1 > + vid2 DSS0_VID2 VID1 video plane 2 > + ovr1 DSS0_OVR1 OVR1 overlay manager for vp1 > + ovr2 DSS0_OVR2 OVR2 overlay manager for vp2 > + ovr3 DSS0_OVR3 OVR1 overlay manager for vp3 > + ovr4 DSS0_OVR4 OVR2 overlay manager for vp4 > + vp1DSS0_VP1VP1 video port 1 > + vp2DSS0_VP2VP1 video port 2 > + vp3DSS0_VP3VP1 video port 3 > + vp4DSS0_VP4VP1 video port 4 > + wp DSS0_WB Write Back registers I guess it applies to all your schemas in that patch series, but you could just do something like reg: items: - description: DSS Master common register area - description: DSS Shared common register area 0 - description: DSS Shared common register area 1 ... That way, you wouldn't have to worry about the maxItems, and you end up doing pretty much that already in the description > + reg-names: > +items: > + - const: common_m > + - const: common_s0 > + - const: common_s1 > + - const: common_s2 > + - const: vidl1 > + - const: vidl2 > + - const: vid1 > + - const: vid2 > + - const: ovr1 > + - const: ovr2 > + - const: ovr3 > + - const: ovr4 > + - const: vp1 > + - const: vp2 > + - const: vp3 > + - const: vp4 > + - const: wb > + > + clocks: > +maxItems: 5 > +description: > + phandles to clock nodes for DSS functional clock (fck) and video > + port 1, 2, 3 and 4 pixel clocks (vp1, vp2, vp3, vp4). > + > + clock-names: > +items: > + - const: fck > + - const: vp1 > + - const: vp2 > + - const: vp3 > + - const: vp4 > + > + interrupts: > +maxItems: 4 > +description: > + Interrupt descriptions for common irq registers in common_m, > + common_m0, common_m1, and common_m2, sections. Same story here, but the names don't match interrupt-names. I guess describing what those interrupts actually are would be great: you just define how the driver calls them, but not what they are actually doing or representing. I'm guessing that would end up in something like that: interrupts: items: - description: DSS Master interrupt - description: DSS Shared 0 interrupt - description: DSS Shared 1 interrupt - description: DSS Shared 2
Re: [PATCH v4 3/5] dt-bindings: display: ti, j721e-dss: Add dt-schema yaml binding
On 19/12/2019 16:01, Jyri Sarha wrote: > On 19/12/2019 10:38, Maxime Ripard wrote: >> Hi, >> >> On Thu, Dec 19, 2019 at 10:23:17AM +0200, Jyri Sarha wrote: >>> Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone >>> Display SubSystem. >>> >>> Version history: >>> >>> v2: no change >>> >>> v3: - reg-names: "wp" -> "wb" >>> - Add ports node >>> - Add includes to dts example >>> - reindent dts example >>> >>> v4: - Add descriptions to reg, clocks, and interrups properties >>> - Remove minItems when its value is the same as maxItems value >>> >>> Signed-off-by: Jyri Sarha >>> --- >>> .../bindings/display/ti/ti,j721e-dss.yaml | 209 ++ >>> 1 file changed, 209 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >>> >>> diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >>> b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >>> new file mode 100644 >>> index ..cd68c4294f9a >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >>> @@ -0,0 +1,209 @@ >>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >>> +# Copyright 2019 Texas Instruments Incorporated >>> +%YAML 1.2 >>> +--- >>> +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#; >>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#; >>> + >>> +title: Texas Instruments J721E Display Subsystem >>> + >>> +maintainers: >>> + - Jyri Sarha >>> + - Tomi Valkeinen >>> + >>> +description: | >>> + The J721E TI Keystone Display SubSystem with four output ports and >>> + four video planes. There is two full video planes and two "lite >>> + planes" without scaling support. The video ports can be connected to >>> + the SoC's DPI pins or to integrated display bridges on the SoC. >>> + >>> +properties: >>> + compatible: >>> +const: ti,j721e-dss >>> + >>> + reg: >>> +maxItems: 17 >>> +description: | >>> + Addresses to each DSS memory region described in the SoC's TRM. >>> + The reg-names refer to memory regions as follows: >>> + reg-names: Region Name in TRM: Description: >>> + common_m DSS0_DISPC_0_COMMON_M DSS Master common register area >>> + common_s0 DSS0_DISPC_0_COMMON_SO DSS Shared common register area 0 >>> + common_s1 DSS0_DISPC_0_COMMON_S1 DSS Shared common register area 1 >>> + common_s2 DSS0_DISPC_0_COMMON_S2 DSS Shared common register area 2 >>> + vidl1 DSS0_VIDL1 VIDL1 light video plane 1 >>> + vidl2 DSS0_VIDL2 VIDL2 light video plane 2 >>> + vid1 DSS0_VID1 VID1 video plane 1 >>> + vid2 DSS0_VID2 VID1 video plane 2 >>> + ovr1 DSS0_OVR1 OVR1 overlay manager for vp1 >>> + ovr2 DSS0_OVR2 OVR2 overlay manager for vp2 >>> + ovr3 DSS0_OVR3 OVR1 overlay manager for vp3 >>> + ovr4 DSS0_OVR4 OVR2 overlay manager for vp4 >>> + vp1DSS0_VP1VP1 video port 1 >>> + vp2DSS0_VP2VP1 video port 2 >>> + vp3DSS0_VP3VP1 video port 3 >>> + vp4DSS0_VP4VP1 video port 4 >>> + wp DSS0_WB Write Back registers >> I guess it applies to all your schemas in that patch series, but you >> could just do something like >> >> reg: >> items: >> - description: DSS Master common register area >> - description: DSS Shared common register area 0 >> - description: DSS Shared common register area 1 >> > Ok, thanks. I was not sure if you can do that (still a newbie with > yaml). What do you think about Peter Ujfalusi's suggestion of putting > the descriptions to reg-names (and clock-names and interrupt-names)? > e.g. something like this: > > reg-names: > items: > - const: common_m > - description: DSS Master common register area > - const: common_s0 > - description: DSS Master common register area > ... > > Or is that even allowed? > Hmmm, it looks like make dt_binding_check does not like that. I guess I go with your suggestion, but with reg-name reference in the description. Best regards, Jyri -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4 3/5] dt-bindings: display: ti, j721e-dss: Add dt-schema yaml binding
On 19/12/2019 10:38, Maxime Ripard wrote: > Hi, > > On Thu, Dec 19, 2019 at 10:23:17AM +0200, Jyri Sarha wrote: >> Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone >> Display SubSystem. >> >> Version history: >> >> v2: no change >> >> v3: - reg-names: "wp" -> "wb" >> - Add ports node >> - Add includes to dts example >> - reindent dts example >> >> v4: - Add descriptions to reg, clocks, and interrups properties >> - Remove minItems when its value is the same as maxItems value >> >> Signed-off-by: Jyri Sarha >> --- >> .../bindings/display/ti/ti,j721e-dss.yaml | 209 ++ >> 1 file changed, 209 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >> >> diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >> b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >> new file mode 100644 >> index ..cd68c4294f9a >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml >> @@ -0,0 +1,209 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +# Copyright 2019 Texas Instruments Incorporated >> +%YAML 1.2 >> +--- >> +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#; >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#; >> + >> +title: Texas Instruments J721E Display Subsystem >> + >> +maintainers: >> + - Jyri Sarha >> + - Tomi Valkeinen >> + >> +description: | >> + The J721E TI Keystone Display SubSystem with four output ports and >> + four video planes. There is two full video planes and two "lite >> + planes" without scaling support. The video ports can be connected to >> + the SoC's DPI pins or to integrated display bridges on the SoC. >> + >> +properties: >> + compatible: >> +const: ti,j721e-dss >> + >> + reg: >> +maxItems: 17 >> +description: | >> + Addresses to each DSS memory region described in the SoC's TRM. >> + The reg-names refer to memory regions as follows: >> + reg-names: Region Name in TRM: Description: >> + common_m DSS0_DISPC_0_COMMON_M DSS Master common register area >> + common_s0 DSS0_DISPC_0_COMMON_SO DSS Shared common register area 0 >> + common_s1 DSS0_DISPC_0_COMMON_S1 DSS Shared common register area 1 >> + common_s2 DSS0_DISPC_0_COMMON_S2 DSS Shared common register area 2 >> + vidl1 DSS0_VIDL1 VIDL1 light video plane 1 >> + vidl2 DSS0_VIDL2 VIDL2 light video plane 2 >> + vid1 DSS0_VID1 VID1 video plane 1 >> + vid2 DSS0_VID2 VID1 video plane 2 >> + ovr1 DSS0_OVR1 OVR1 overlay manager for vp1 >> + ovr2 DSS0_OVR2 OVR2 overlay manager for vp2 >> + ovr3 DSS0_OVR3 OVR1 overlay manager for vp3 >> + ovr4 DSS0_OVR4 OVR2 overlay manager for vp4 >> + vp1DSS0_VP1VP1 video port 1 >> + vp2DSS0_VP2VP1 video port 2 >> + vp3DSS0_VP3VP1 video port 3 >> + vp4DSS0_VP4VP1 video port 4 >> + wp DSS0_WB Write Back registers > > I guess it applies to all your schemas in that patch series, but you > could just do something like > > reg: > items: > - description: DSS Master common register area > - description: DSS Shared common register area 0 > - description: DSS Shared common register area 1 > Ok, thanks. I was not sure if you can do that (still a newbie with yaml). What do you think about Peter Ujfalusi's suggestion of putting the descriptions to reg-names (and clock-names and interrupt-names)? e.g. something like this: reg-names: items: - const: common_m - description: DSS Master common register area - const: common_s0 - description: DSS Master common register area ... Or is that even allowed? > ... > > That way, you wouldn't have to worry about the maxItems, and you end > up doing pretty much that already in the description > >> + reg-names: >> +items: >> + - const: common_m >> + - const: common_s0 >> + - const: common_s1 >> + - const: common_s2 >> + - const: vidl1 >> + - const: vidl2 >> + - const: vid1 >> + - const: vid2 >> + - const: ovr1 >> + - const: ovr2 >> + - const: ovr3 >> + - const: ovr4 >> + - const: vp1 >> + - const: vp2 >> + - const: vp3 >> + - const: vp4 >> + - const: wb >> + >> + clocks: >> +maxItems: 5 >> +description: >> + phandles to clock nodes for DSS functional clock (fck) and video >> + port 1, 2, 3 and 4 pixel clocks (vp1, vp2, vp3, vp4). >> + >> + clock-names: >> +items: >> + - const: fck >> + - const: vp1 >> + - const: vp2 >> + - const: vp3 >> + - const: vp4 >> + >> + interrupts:
Re: [PATCH v4 3/5] dt-bindings: display: ti, j721e-dss: Add dt-schema yaml binding
Hi Jyri, On 19/12/2019 10.23, Jyri Sarha wrote: > Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone > Display SubSystem. > > Version history: > > v2: no change > > v3: - reg-names: "wp" -> "wb" > - Add ports node > - Add includes to dts example > - reindent dts example > > v4: - Add descriptions to reg, clocks, and interrups properties > - Remove minItems when its value is the same as maxItems value > > Signed-off-by: Jyri Sarha > --- > .../bindings/display/ti/ti,j721e-dss.yaml | 209 ++ > 1 file changed, 209 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > > diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > new file mode 100644 > index ..cd68c4294f9a > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > @@ -0,0 +1,209 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 Texas Instruments Incorporated > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#; > + > +title: Texas Instruments J721E Display Subsystem > + > +maintainers: > + - Jyri Sarha > + - Tomi Valkeinen > + > +description: | > + The J721E TI Keystone Display SubSystem with four output ports and > + four video planes. There is two full video planes and two "lite > + planes" without scaling support. The video ports can be connected to > + the SoC's DPI pins or to integrated display bridges on the SoC. > + > +properties: > + compatible: > +const: ti,j721e-dss > + > + reg: > +maxItems: 17 > +description: | > + Addresses to each DSS memory region described in the SoC's TRM. > + The reg-names refer to memory regions as follows: > + reg-names: Region Name in TRM: Description: > + common_m DSS0_DISPC_0_COMMON_M DSS Master common register area > + common_s0 DSS0_DISPC_0_COMMON_SO DSS Shared common register area 0 > + common_s1 DSS0_DISPC_0_COMMON_S1 DSS Shared common register area 1 > + common_s2 DSS0_DISPC_0_COMMON_S2 DSS Shared common register area 2 > + vidl1 DSS0_VIDL1 VIDL1 light video plane 1 > + vidl2 DSS0_VIDL2 VIDL2 light video plane 2 > + vid1 DSS0_VID1 VID1 video plane 1 > + vid2 DSS0_VID2 VID1 video plane 2 > + ovr1 DSS0_OVR1 OVR1 overlay manager for vp1 > + ovr2 DSS0_OVR2 OVR2 overlay manager for vp2 > + ovr3 DSS0_OVR3 OVR1 overlay manager for vp3 > + ovr4 DSS0_OVR4 OVR2 overlay manager for vp4 > + vp1DSS0_VP1VP1 video port 1 > + vp2DSS0_VP2VP1 video port 2 > + vp3DSS0_VP3VP1 video port 3 > + vp4DSS0_VP4VP1 video port 4 > + wp DSS0_WB Write Back registers 'wp' is back ;) > + > + reg-names: > +items: > + - const: common_m > + - const: common_s0 > + - const: common_s1 > + - const: common_s2 > + - const: vidl1 > + - const: vidl2 > + - const: vid1 > + - const: vid2 > + - const: ovr1 > + - const: ovr2 > + - const: ovr3 > + - const: ovr4 > + - const: vp1 > + - const: vp2 > + - const: vp3 > + - const: vp4 > + - const: wb imho the description you put under the 'reg' would be more natural here, where you actually specifying the names of the register ranges. > + > + clocks: > +maxItems: 5 > +description: > + phandles to clock nodes for DSS functional clock (fck) and video > + port 1, 2, 3 and 4 pixel clocks (vp1, vp2, vp3, vp4). > + > + clock-names: > +items: > + - const: fck > + - const: vp1 > + - const: vp2 > + - const: vp3 > + - const: vp4 Same comment, it is more natural to have the description coupled with what you are describing. > + > + interrupts: > +maxItems: 4 > +description: > + Interrupt descriptions for common irq registers in common_m, > + common_m0, common_m1, and common_m2, sections. > + > + interrupt-names: > +items: > + - const: common_m > + - const: common_s0 > + - const: common_s1 > + - const: common_s2 > + > + power-domains: > +maxItems: 1 > +description: phandle to the associated power domain > + > + ports: > +type: object > +description: > + Ports as described in Documentation/devictree/bindings/graph.txt > +properties: > + "#address-cells": > +const: 1 > + > + "#size-cells": > +const: 0 > + > + port@0: > +type: object > +description: > + The output port node form video port 1 > +
[PATCH v4 3/5] dt-bindings: display: ti, j721e-dss: Add dt-schema yaml binding
Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone Display SubSystem. Version history: v2: no change v3: - reg-names: "wp" -> "wb" - Add ports node - Add includes to dts example - reindent dts example v4: - Add descriptions to reg, clocks, and interrups properties - Remove minItems when its value is the same as maxItems value Signed-off-by: Jyri Sarha --- .../bindings/display/ti/ti,j721e-dss.yaml | 209 ++ 1 file changed, 209 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml new file mode 100644 index ..cd68c4294f9a --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -0,0 +1,209 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#; +$schema: "http://devicetree.org/meta-schemas/core.yaml#; + +title: Texas Instruments J721E Display Subsystem + +maintainers: + - Jyri Sarha + - Tomi Valkeinen + +description: | + The J721E TI Keystone Display SubSystem with four output ports and + four video planes. There is two full video planes and two "lite + planes" without scaling support. The video ports can be connected to + the SoC's DPI pins or to integrated display bridges on the SoC. + +properties: + compatible: +const: ti,j721e-dss + + reg: +maxItems: 17 +description: | + Addresses to each DSS memory region described in the SoC's TRM. + The reg-names refer to memory regions as follows: + reg-names: Region Name in TRM: Description: + common_m DSS0_DISPC_0_COMMON_M DSS Master common register area + common_s0 DSS0_DISPC_0_COMMON_SO DSS Shared common register area 0 + common_s1 DSS0_DISPC_0_COMMON_S1 DSS Shared common register area 1 + common_s2 DSS0_DISPC_0_COMMON_S2 DSS Shared common register area 2 + vidl1 DSS0_VIDL1 VIDL1 light video plane 1 + vidl2 DSS0_VIDL2 VIDL2 light video plane 2 + vid1 DSS0_VID1 VID1 video plane 1 + vid2 DSS0_VID2 VID1 video plane 2 + ovr1 DSS0_OVR1 OVR1 overlay manager for vp1 + ovr2 DSS0_OVR2 OVR2 overlay manager for vp2 + ovr3 DSS0_OVR3 OVR1 overlay manager for vp3 + ovr4 DSS0_OVR4 OVR2 overlay manager for vp4 + vp1DSS0_VP1VP1 video port 1 + vp2DSS0_VP2VP1 video port 2 + vp3DSS0_VP3VP1 video port 3 + vp4DSS0_VP4VP1 video port 4 + wp DSS0_WB Write Back registers + + reg-names: +items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + - const: vidl1 + - const: vidl2 + - const: vid1 + - const: vid2 + - const: ovr1 + - const: ovr2 + - const: ovr3 + - const: ovr4 + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + - const: wb + + clocks: +maxItems: 5 +description: + phandles to clock nodes for DSS functional clock (fck) and video + port 1, 2, 3 and 4 pixel clocks (vp1, vp2, vp3, vp4). + + clock-names: +items: + - const: fck + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + + interrupts: +maxItems: 4 +description: + Interrupt descriptions for common irq registers in common_m, + common_m0, common_m1, and common_m2, sections. + + interrupt-names: +items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + + power-domains: +maxItems: 1 +description: phandle to the associated power domain + + ports: +type: object +description: + Ports as described in Documentation/devictree/bindings/graph.txt +properties: + "#address-cells": +const: 1 + + "#size-cells": +const: 0 + + port@0: +type: object +description: + The output port node form video port 1 + + port@1: +type: object +description: + The output port node from video port 2 + + port@2: +type: object +description: + The output port node from video port 3 + + port@3: +type: object +description: + The output port node from video port 4 + +required: + - "#address-cells" + - "#size-cells" + + max-memory-bandwidth: +$ref: /schemas/types.yaml#/definitions/uint32 +description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second +
