[PATCH v8 0/2] Add Rockchip Inno-HDMI driver
Hi Mark, Thanks for your apply ;) - Yakir On 02/18/2016 02:12 PM, Mark yao wrote: > On 2016å¹´01æ29æ¥ 14:42, Yakir Yang wrote: >> Here are a brief introduction to Innosilicon HDMI IP: >>- Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant >> transmitter >>- Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec >>- Digital video interface supports a pixel size of 24, 30, 36, >> 48bits color depth in RGB >>- S/PDIF output supports PCM, Dolby Digital, DTS digital audio >> transmission >> (32-192kHz Fs) using IEC60958 and IEC 61937 >>- The EDID and CEC function are also supported by Innosilicon HDMI >> Transmitter Controlle >> >> Changes in v8: >> - Don't check whether encoder output format is RGB colorspace, cause >> driver >>default configure the output colorspace to RGB. (ZhengYang) >> - Correct the check condition in inno_hdmi_config_video_csc() >> (ZhengYang) >> - if (data->enc_out_format == data->enc_out_format) { >> + if (data->enc_in_format == data->enc_out_format) { >> >> Changes in v7: >> - Correct the module licnese statement (Paul) >> - MODULE_LICENSE("GPL"); >> + MODULE_LICENSE("GPLv2"); >> - Start indentation with tabs and fix the misspell in Kconfig (Paul) >> - Carry the lost device-binding document (Heiko) >> >> Changes in v6: >> - Rebase the Makefile/Kconfig files which add by Chris's >> rockchip-mipi driver (Caeser) >> >> Changes in v5: >> - Use hdmi_infoframe helper functions to packed the infoframe (Russell) >> - Remove the unused double wait_for_completion_timeout for ddc >> transfer (Russell) >> - Remove the unused local variable in "inno_hdmi_i2c_write()" >> function (Russell) >> >> Changes in v4: >> - Modify the commit title "drm/rockchip: hdmi: ..." (Mark) >> - Correct the "DKMS" to "DPMS" (Mark) >> - Fix over 80 characters problems (Mark) >> - Remove encoder .prepare/.commit helper functions, and move the vop >> mode >> configure function into encoder .enable helper functions. (Mark) >> >> Changes in v3: >> - Use encoder enable/disable function, and remove the encoder DPMS >> function >> - Keep HDMI PLL power on in standby mode >> >> Changes in v2: >> - Using DRM atomic helper functions for connector init (Mark) >> - Remove "hdmi->connector.encoder = encoder;" (Mark) >> - Add the Acked-by tags from Rob >> - Correct the misspell "rk3036-dw-hdmi" (Heiko) >> >> Yakir Yang (2): >>drm/rockchip: hdmi: add Innosilicon HDMI support >>dt-bindings: add document for Innosilicon HDMI on Rockchip platform >> >> .../display/rockchip/inno_hdmi-rockchip.txt| 50 ++ >> drivers/gpu/drm/rockchip/Kconfig | 8 + >> drivers/gpu/drm/rockchip/Makefile | 1 + >> drivers/gpu/drm/rockchip/inno_hdmi.c | 939 >> + >> drivers/gpu/drm/rockchip/inno_hdmi.h | 362 >> 5 files changed, 1360 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt >> create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c >> create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h >> > > Applied to my branch :-) . > > Thanks. >
[PATCH v8 0/2] Add Rockchip Inno-HDMI driver
On 2016å¹´01æ29æ¥ 14:42, Yakir Yang wrote: > Here are a brief introduction to Innosilicon HDMI IP: >- Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter >- Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec >- Digital video interface supports a pixel size of 24, 30, 36, 48bits > color depth in RGB >- S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission > (32-192kHz Fs) using IEC60958 and IEC 61937 >- The EDID and CEC function are also supported by Innosilicon HDMI > Transmitter Controlle > > Changes in v8: > - Don't check whether encoder output format is RGB colorspace, cause driver >default configure the output colorspace to RGB. (ZhengYang) > - Correct the check condition in inno_hdmi_config_video_csc() (ZhengYang) > - if (data->enc_out_format == data->enc_out_format) { > + if (data->enc_in_format == data->enc_out_format) { > > Changes in v7: > - Correct the module licnese statement (Paul) > - MODULE_LICENSE("GPL"); > + MODULE_LICENSE("GPLv2"); > - Start indentation with tabs and fix the misspell in Kconfig (Paul) > - Carry the lost device-binding document (Heiko) > > Changes in v6: > - Rebase the Makefile/Kconfig files which add by Chris's rockchip-mipi driver > (Caeser) > > Changes in v5: > - Use hdmi_infoframe helper functions to packed the infoframe (Russell) > - Remove the unused double wait_for_completion_timeout for ddc transfer > (Russell) > - Remove the unused local variable in "inno_hdmi_i2c_write()" function > (Russell) > > Changes in v4: > - Modify the commit title "drm/rockchip: hdmi: ..." (Mark) > - Correct the "DKMS" to "DPMS" (Mark) > - Fix over 80 characters problems (Mark) > - Remove encoder .prepare/.commit helper functions, and move the vop mode > configure function into encoder .enable helper functions. (Mark) > > Changes in v3: > - Use encoder enable/disable function, and remove the encoder DPMS function > - Keep HDMI PLL power on in standby mode > > Changes in v2: > - Using DRM atomic helper functions for connector init (Mark) > - Remove "hdmi->connector.encoder = encoder;" (Mark) > - Add the Acked-by tags from Rob > - Correct the misspell "rk3036-dw-hdmi" (Heiko) > > Yakir Yang (2): >drm/rockchip: hdmi: add Innosilicon HDMI support >dt-bindings: add document for Innosilicon HDMI on Rockchip platform > > .../display/rockchip/inno_hdmi-rockchip.txt| 50 ++ > drivers/gpu/drm/rockchip/Kconfig | 8 + > drivers/gpu/drm/rockchip/Makefile | 1 + > drivers/gpu/drm/rockchip/inno_hdmi.c | 939 > + > drivers/gpu/drm/rockchip/inno_hdmi.h | 362 > 5 files changed, 1360 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt > create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c > create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h > Applied to my branch :-) . Thanks. -- ï¼ark Yao
[PATCH v8 0/2] Add Rockchip Inno-HDMI driver
Hi Mark, Am Dienstag, 16. Februar 2016, 08:44:41 schrieb Mark yao: > Ping, it seems inno hdmi driver is ready, So I'd like to merge it into > drm/rockchip if there is no doubt these days. I think you can just go ahead with picking them up, I think they have ripened enough :-) Heiko
[PATCH v8 0/2] Add Rockchip Inno-HDMI driver
Hi Ping, it seems inno hdmi driver is ready, So I'd like to merge it into drm/rockchip if there is no doubt these days. Thanks. Mark On 2016å¹´01æ29æ¥ 14:42, Yakir Yang wrote: > Here are a brief introduction to Innosilicon HDMI IP: >- Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter >- Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec >- Digital video interface supports a pixel size of 24, 30, 36, 48bits > color depth in RGB >- S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission > (32-192kHz Fs) using IEC60958 and IEC 61937 >- The EDID and CEC function are also supported by Innosilicon HDMI > Transmitter Controlle > > Changes in v8: > - Don't check whether encoder output format is RGB colorspace, cause driver >default configure the output colorspace to RGB. (ZhengYang) > - Correct the check condition in inno_hdmi_config_video_csc() (ZhengYang) > - if (data->enc_out_format == data->enc_out_format) { > + if (data->enc_in_format == data->enc_out_format) { > > Changes in v7: > - Correct the module licnese statement (Paul) > - MODULE_LICENSE("GPL"); > + MODULE_LICENSE("GPLv2"); > - Start indentation with tabs and fix the misspell in Kconfig (Paul) > - Carry the lost device-binding document (Heiko) > > Changes in v6: > - Rebase the Makefile/Kconfig files which add by Chris's rockchip-mipi driver > (Caeser) > > Changes in v5: > - Use hdmi_infoframe helper functions to packed the infoframe (Russell) > - Remove the unused double wait_for_completion_timeout for ddc transfer > (Russell) > - Remove the unused local variable in "inno_hdmi_i2c_write()" function > (Russell) > > Changes in v4: > - Modify the commit title "drm/rockchip: hdmi: ..." (Mark) > - Correct the "DKMS" to "DPMS" (Mark) > - Fix over 80 characters problems (Mark) > - Remove encoder .prepare/.commit helper functions, and move the vop mode > configure function into encoder .enable helper functions. (Mark) > > Changes in v3: > - Use encoder enable/disable function, and remove the encoder DPMS function > - Keep HDMI PLL power on in standby mode > > Changes in v2: > - Using DRM atomic helper functions for connector init (Mark) > - Remove "hdmi->connector.encoder = encoder;" (Mark) > - Add the Acked-by tags from Rob > - Correct the misspell "rk3036-dw-hdmi" (Heiko) > > Yakir Yang (2): >drm/rockchip: hdmi: add Innosilicon HDMI support >dt-bindings: add document for Innosilicon HDMI on Rockchip platform > > .../display/rockchip/inno_hdmi-rockchip.txt| 50 ++ > drivers/gpu/drm/rockchip/Kconfig | 8 + > drivers/gpu/drm/rockchip/Makefile | 1 + > drivers/gpu/drm/rockchip/inno_hdmi.c | 939 > + > drivers/gpu/drm/rockchip/inno_hdmi.h | 362 > 5 files changed, 1360 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt > create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c > create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h >
[PATCH v8 0/2] Add Rockchip Inno-HDMI driver
Hi Mark, Am Freitag, 29. Januar 2016, 14:42:48 schrieb Yakir Yang: > Here are a brief introduction to Innosilicon HDMI IP: > - Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter > - Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec > - Digital video interface supports a pixel size of 24, 30, 36, 48bits > color depth in RGB - S/PDIF output supports PCM, Dolby Digital, DTS digital > audio transmission (32-192kHz Fs) using IEC60958 and IEC 61937 > - The EDID and CEC function are also supported by Innosilicon HDMI > Transmitter Controlle do you plan on picking up this two patches soon? It seems there were no further objections. Caesar submitted the dts parts but I need to hold off on them until you took the driver part :-) . Thanks Heiko
[PATCH v8 0/2] Add Rockchip Inno-HDMI driver
Here are a brief introduction to Innosilicon HDMI IP: - Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter - Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec - Digital video interface supports a pixel size of 24, 30, 36, 48bits color depth in RGB - S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission (32-192kHz Fs) using IEC60958 and IEC 61937 - The EDID and CEC function are also supported by Innosilicon HDMI Transmitter Controlle Changes in v8: - Don't check whether encoder output format is RGB colorspace, cause driver default configure the output colorspace to RGB. (ZhengYang) - Correct the check condition in inno_hdmi_config_video_csc() (ZhengYang) - if (data->enc_out_format == data->enc_out_format) { + if (data->enc_in_format == data->enc_out_format) { Changes in v7: - Correct the module licnese statement (Paul) - MODULE_LICENSE("GPL"); + MODULE_LICENSE("GPLv2"); - Start indentation with tabs and fix the misspell in Kconfig (Paul) - Carry the lost device-binding document (Heiko) Changes in v6: - Rebase the Makefile/Kconfig files which add by Chris's rockchip-mipi driver (Caeser) Changes in v5: - Use hdmi_infoframe helper functions to packed the infoframe (Russell) - Remove the unused double wait_for_completion_timeout for ddc transfer (Russell) - Remove the unused local variable in "inno_hdmi_i2c_write()" function (Russell) Changes in v4: - Modify the commit title "drm/rockchip: hdmi: ..." (Mark) - Correct the "DKMS" to "DPMS" (Mark) - Fix over 80 characters problems (Mark) - Remove encoder .prepare/.commit helper functions, and move the vop mode configure function into encoder .enable helper functions. (Mark) Changes in v3: - Use encoder enable/disable function, and remove the encoder DPMS function - Keep HDMI PLL power on in standby mode Changes in v2: - Using DRM atomic helper functions for connector init (Mark) - Remove "hdmi->connector.encoder = encoder;" (Mark) - Add the Acked-by tags from Rob - Correct the misspell "rk3036-dw-hdmi" (Heiko) Yakir Yang (2): drm/rockchip: hdmi: add Innosilicon HDMI support dt-bindings: add document for Innosilicon HDMI on Rockchip platform .../display/rockchip/inno_hdmi-rockchip.txt| 50 ++ drivers/gpu/drm/rockchip/Kconfig | 8 + drivers/gpu/drm/rockchip/Makefile | 1 + drivers/gpu/drm/rockchip/inno_hdmi.c | 939 + drivers/gpu/drm/rockchip/inno_hdmi.h | 362 5 files changed, 1360 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h -- 1.9.1