Re: [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
On 26.10.2018 00:21, Douglas Anderson wrote: > As far as I can tell the bindings that were added in commit > 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel > bindings") weren't actually for Innolux TV123WAM but were actually for > Innolux P120ZDG-BF1. > > As far as I can tell the Innolux TV123WAM isn't a real panel and but > it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. > Let's unmosh. > > Here's my evidence: > > * Searching for TV123WAM on the Internet turns up a TI panel. While > it's possible that an Innolux panel has the same model number as the > TI Panel, it seems a little doubtful. Looking up the datasheet from > the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. > > * As far as I know, the patch adding the Innolux Panel was supposed to > be for the board that's sitting in front of me as I type this > (support for that board is not yet upstream). On the back of that > panel I see Innolux P120ZDZ-EZ1 rev B1. > > * Someone pointed me at a datasheet that's supposed to be for the > panel in front of me (sorry, I can't share the datasheet). That > datasheet has the string "p120zdg-bf1" > > * If I search for "P120ZDG-BF1" on the Internet I get hits for panels > that are 2160x1440. They don't have datasheets, but the fact that > the resolution matches is a good sign. > > While we doing the rename, also mention that no-hpd can be used with > this panel. See the previous patch in this series ("drm/panel: > simple: Add "no-hpd" delay for Innolux TV123WAM"). > > Fixes: 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel > bindings") > Signed-off-by: Douglas Anderson > Reviewed-by: Rob Herring > Cc: Sandeep Panda Grats for good deduction. Reviewed-by: Andrzej Hajda -- Regards Andrzej ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
Sean, On Fri, Oct 26, 2018 at 7:47 AM Sean Paul wrote: > > I didn't see your v2 when I replied to the v1 patch, so for the record, > > > > Reviewed-by: Sean Paul > > > > Also note to whoever applies this to -misc, v1 also had > > > > Reviewed-by: Abhinav Kumar > > And I just realized that patches 5 & 6 were swapped in v2. So nevermind this, > Doug's v2 tags are correct. > > Dear coffee, please kick in soon. Sorry about that--I should have mentioned it in the notes. I realized that the bindings were supposed to land before the code so I swapped them. Thanks for your review! -Doug ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
On Fri, Oct 26, 2018 at 10:43:56AM -0400, Sean Paul wrote: > On Thu, Oct 25, 2018 at 03:21:33PM -0700, Douglas Anderson wrote: > > As far as I can tell the bindings that were added in commit > > 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel > > bindings") weren't actually for Innolux TV123WAM but were actually for > > Innolux P120ZDG-BF1. > > > > As far as I can tell the Innolux TV123WAM isn't a real panel and but > > it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. > > Let's unmosh. > > > > Here's my evidence: > > > > * Searching for TV123WAM on the Internet turns up a TI panel. While > > it's possible that an Innolux panel has the same model number as the > > TI Panel, it seems a little doubtful. Looking up the datasheet from > > the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. > > > > * As far as I know, the patch adding the Innolux Panel was supposed to > > be for the board that's sitting in front of me as I type this > > (support for that board is not yet upstream). On the back of that > > panel I see Innolux P120ZDZ-EZ1 rev B1. > > > > * Someone pointed me at a datasheet that's supposed to be for the > > panel in front of me (sorry, I can't share the datasheet). That > > datasheet has the string "p120zdg-bf1" > > > > * If I search for "P120ZDG-BF1" on the Internet I get hits for panels > > that are 2160x1440. They don't have datasheets, but the fact that > > the resolution matches is a good sign. > > > > While we doing the rename, also mention that no-hpd can be used with > > this panel. See the previous patch in this series ("drm/panel: > > simple: Add "no-hpd" delay for Innolux TV123WAM"). > > > > Fixes: 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM > > panel bindings") > > Signed-off-by: Douglas Anderson > > Reviewed-by: Rob Herring > > I didn't see your v2 when I replied to the v1 patch, so for the record, > > Reviewed-by: Sean Paul > > Also note to whoever applies this to -misc, v1 also had > > Reviewed-by: Abhinav Kumar And I just realized that patches 5 & 6 were swapped in v2. So nevermind this, Doug's v2 tags are correct. Dear coffee, please kick in soon. Sean > > > Sean > > > Cc: Sandeep Panda > > --- > > > > Changes in v2: None > > > > .../{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt} | 8 +--- > > 1 file changed, 5 insertions(+), 3 deletions(-) > > rename > > Documentation/devicetree/bindings/display/panel/{innolux,tv123wam.txt => > > innolux,p120zdg-bf1.txt} (70%) > > > > diff --git > > a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt > > b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt > > similarity index 70% > > rename from > > Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt > > rename to > > Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt > > index a9b35265fa13..513f03466aba 100644 > > --- a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt > > +++ > > b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt > > @@ -1,20 +1,22 @@ > > -Innolux TV123WAM 12.3 inch eDP 2K display panel > > +Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel > > > > This binding is compatible with the simple-panel binding, which is > > specified > > in simple-panel.txt in this directory. > > > > Required properties: > > -- compatible: should be "innolux,tv123wam" > > +- compatible: should be "innolux,p120zdg-bf1" > > - power-supply: regulator to provide the supply voltage > > > > Optional properties: > > - enable-gpios: GPIO pin to enable or disable the panel > > - backlight: phandle of the backlight device attached to the panel > > +- no-hpd: If HPD isn't hooked up; add this property. > > > > Example: > > panel_edp: panel-edp { > > - compatible = "innolux,tv123wam"; > > + compatible = "innolux,p120zdg-bf1"; > > enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>; > > power-supply = <&pm8916_l2>; > > backlight = <&backlight>; > > + no-hpd; > > }; > > -- > > 2.19.1.568.g152ad8e336-goog > > > > -- > Sean Paul, Software Engineer, Google / Chromium OS -- Sean Paul, Software Engineer, Google / Chromium OS ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
On Thu, Oct 25, 2018 at 03:21:33PM -0700, Douglas Anderson wrote: > As far as I can tell the bindings that were added in commit > 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel > bindings") weren't actually for Innolux TV123WAM but were actually for > Innolux P120ZDG-BF1. > > As far as I can tell the Innolux TV123WAM isn't a real panel and but > it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. > Let's unmosh. > > Here's my evidence: > > * Searching for TV123WAM on the Internet turns up a TI panel. While > it's possible that an Innolux panel has the same model number as the > TI Panel, it seems a little doubtful. Looking up the datasheet from > the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. > > * As far as I know, the patch adding the Innolux Panel was supposed to > be for the board that's sitting in front of me as I type this > (support for that board is not yet upstream). On the back of that > panel I see Innolux P120ZDZ-EZ1 rev B1. > > * Someone pointed me at a datasheet that's supposed to be for the > panel in front of me (sorry, I can't share the datasheet). That > datasheet has the string "p120zdg-bf1" > > * If I search for "P120ZDG-BF1" on the Internet I get hits for panels > that are 2160x1440. They don't have datasheets, but the fact that > the resolution matches is a good sign. > > While we doing the rename, also mention that no-hpd can be used with > this panel. See the previous patch in this series ("drm/panel: > simple: Add "no-hpd" delay for Innolux TV123WAM"). > > Fixes: 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel > bindings") > Signed-off-by: Douglas Anderson > Reviewed-by: Rob Herring I didn't see your v2 when I replied to the v1 patch, so for the record, Reviewed-by: Sean Paul Also note to whoever applies this to -misc, v1 also had Reviewed-by: Abhinav Kumar Sean > Cc: Sandeep Panda > --- > > Changes in v2: None > > .../{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt} | 8 +--- > 1 file changed, 5 insertions(+), 3 deletions(-) > rename Documentation/devicetree/bindings/display/panel/{innolux,tv123wam.txt > => innolux,p120zdg-bf1.txt} (70%) > > diff --git > a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt > b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt > similarity index 70% > rename from > Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt > rename to > Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt > index a9b35265fa13..513f03466aba 100644 > --- a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt > +++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt > @@ -1,20 +1,22 @@ > -Innolux TV123WAM 12.3 inch eDP 2K display panel > +Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel > > This binding is compatible with the simple-panel binding, which is specified > in simple-panel.txt in this directory. > > Required properties: > -- compatible: should be "innolux,tv123wam" > +- compatible: should be "innolux,p120zdg-bf1" > - power-supply: regulator to provide the supply voltage > > Optional properties: > - enable-gpios: GPIO pin to enable or disable the panel > - backlight: phandle of the backlight device attached to the panel > +- no-hpd: If HPD isn't hooked up; add this property. > > Example: > panel_edp: panel-edp { > - compatible = "innolux,tv123wam"; > + compatible = "innolux,p120zdg-bf1"; > enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>; > power-supply = <&pm8916_l2>; > backlight = <&backlight>; > + no-hpd; > }; > -- > 2.19.1.568.g152ad8e336-goog > -- Sean Paul, Software Engineer, Google / Chromium OS ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel