Re: [PATCH v4] drm/exynos: prepare FIMD clocks
2013/4/23 myungjoo.ham myungjoo@samsung.com 2013/4/22 Inki Dae 2013/4/22 Rafael J. Wysocki r...@sisk.pl On Monday, April 22, 2013 12:37:36 PM Tomasz Figa wrote: On Monday 22 of April 2013 12:17:39 Sylwester Nawrocki wrote: On 04/22/2013 12:03 PM, Inki Dae wrote: Also looks good to me. But what if power domain was disabled without pm runtime? In this case, you must enable the power domain at machine code or bootloader somewhere. This way would not only need some hard codes to turn the power domain on but also not manage power management fully. This is same as only the use of pm runtime interface(needing some hard codes without pm runtime) so I don't prefer to add clk_enable/disable to fimd probe(). I quite tend to force only the use of pm runtime as possible. So please add the hard codes to machine code or bootloader like you did for power domain if you want to use drm fimd without pm runtime. That's not how the runtime PM, clock subsystems work: 1) When CONFIG_PM_RUNTIME is disabled, all the used hardware must be kept powered on all the time. 2) Common Clock Framework will always gate all clocks that have zero enable_count. Note that CCF support for Exynos is already merged for 3.10 and it will be the only available clock support method for Exynos. AFAIK, drivers must work correctly in both cases, with CONFIG_PM_RUNTIME enabled and disabled. Then is the driver worked correctly if the power domain to this device was disabled at bootloader without CONFIG_PM_RUNTIME and with clk_enable()? I think, in this case, the device wouldn't be worked correctly because the power of the device remains off. So you must enable the power domain somewhere. What is the difference between these two cases? How about making the driver dependant on PM_RUNTIME and making it always use pm_runtime_* API, regardless if the platform actually implements runtime PM or not ? Is there any issue in using the Runtime PM core always, rather than coding any workarounds in drivers when PM_RUNTIME is disabled ? I don't think this is a good idea. This would mean that any user that from some reasons don't want to use PM_RUNTIME, would not be able to use the driver anymore. Rafael, Kevin, do you have any opinion on this? I agree. Drivers should work for CONFIG_PM_RUNTIME unset too and static inline stubs for all runtime PM helpers are available in that case. Hi Rafael, The embedded system, at least Exynos SoC case, has the power domain device and this device could be enabled only by pm runtime interface. So the device couldn't be worked correctly without turning the power domain on only calling clk_enable(). In this case, the power domain must be enabled at machine code or bootloader. And the machine without CONFIG_PM_RUNTIME would assume that their own drivers always are enabled so the devices would be worked correctly. Is there any my missing point? - Power domain: not controlled if !CONFIG_PM_RUNTIME. Thus, we may assume that every power domain is kept ON from boot time if !CONFIG_PM_RUNTIME. If power domain is kept OFF from boot time (machine init code or bootloader) with !CONFIG_PM_RUNTIME, then it's simple a mistake at BSP writer. - Yes, the clock is still controlled while !CONFIG_PM_RUNTIME. My opinion is also to let probe do clk-enables though I don't want it to have #ifdef or clk_enable() in the probe function. Thus, implementing power_on()-like function in the driver and let probe() and runtime_pm_get callback call it seems appropriate to me. (that fimd_active(ctx, true) is power-on to itself, right?) I thought that it should assume the power domain and relevant clocks are enabled without CONFIG_PM_RUNTIME. So could anyone please tell me about that? If only the power domain , I think Tomasz's proposal is good solution. Thanks, Inki Dae Cheers, MyungJoo -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
RE: [PATCH v4] drm/exynos: prepare FIMD clocks
2013/4/22 Inki Dae 2013/4/22 Rafael J. Wysocki r...@sisk.pl On Monday, April 22, 2013 12:37:36 PM Tomasz Figa wrote: On Monday 22 of April 2013 12:17:39 Sylwester Nawrocki wrote: On 04/22/2013 12:03 PM, Inki Dae wrote: Also looks good to me. But what if power domain was disabled without pm runtime? In this case, you must enable the power domain at machine code or bootloader somewhere. This way would not only need some hard codes to turn the power domain on but also not manage power management fully. This is same as only the use of pm runtime interface(needing some hard codes without pm runtime) so I don't prefer to add clk_enable/disable to fimd probe(). I quite tend to force only the use of pm runtime as possible. So please add the hard codes to machine code or bootloader like you did for power domain if you want to use drm fimd without pm runtime. That's not how the runtime PM, clock subsystems work: 1) When CONFIG_PM_RUNTIME is disabled, all the used hardware must be kept powered on all the time. 2) Common Clock Framework will always gate all clocks that have zero enable_count. Note that CCF support for Exynos is already merged for 3.10 and it will be the only available clock support method for Exynos. AFAIK, drivers must work correctly in both cases, with CONFIG_PM_RUNTIME enabled and disabled. Then is the driver worked correctly if the power domain to this device was disabled at bootloader without CONFIG_PM_RUNTIME and with clk_enable()? I think, in this case, the device wouldn't be worked correctly because the power of the device remains off. So you must enable the power domain somewhere. What is the difference between these two cases? How about making the driver dependant on PM_RUNTIME and making it always use pm_runtime_* API, regardless if the platform actually implements runtime PM or not ? Is there any issue in using the Runtime PM core always, rather than coding any workarounds in drivers when PM_RUNTIME is disabled ? I don't think this is a good idea. This would mean that any user that from some reasons don't want to use PM_RUNTIME, would not be able to use the driver anymore. Rafael, Kevin, do you have any opinion on this? I agree. Drivers should work for CONFIG_PM_RUNTIME unset too and static inline stubs for all runtime PM helpers are available in that case. Hi Rafael, The embedded system, at least Exynos SoC case, has the power domain device and this device could be enabled only by pm runtime interface. So the device couldn't be worked correctly without turning the power domain on only calling clk_enable(). In this case, the power domain must be enabled at machine code or bootloader. And the machine without CONFIG_PM_RUNTIME would assume that their own drivers always are enabled so the devices would be worked correctly. Is there any my missing point? - Power domain: not controlled if !CONFIG_PM_RUNTIME. Thus, we may assume that every power domain is kept ON from boot time if !CONFIG_PM_RUNTIME. If power domain is kept OFF from boot time (machine init code or bootloader) with !CONFIG_PM_RUNTIME, then it's simple a mistake at BSP writer. - Yes, the clock is still controlled while !CONFIG_PM_RUNTIME. My opinion is also to let probe do clk-enables though I don't want it to have #ifdef or clk_enable() in the probe function. Thus, implementing power_on()-like function in the driver and let probe() and runtime_pm_get callback call it seems appropriate to me. (that fimd_active(ctx, true) is power-on to itself, right?) Cheers, MyungJoo ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
Hi Tomasz,
CCing Mr. Ham
2013/4/21 Tomasz Figa tomasz.f...@gmail.com
Hi Inki,
On Sunday 21 of April 2013 22:36:08 Inki Dae wrote:
2013/4/21 Tomasz Figa tomasz.f...@gmail.com
Hi,
On Monday 08 of April 2013 16:41:54 Viresh Kumar wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the
FIMD
clocks were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during
exit, since clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks
incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks down,
but calling clk_prepare() before clk_enable() is must now.. that's
it.. nothing more.
I fully agree.
The message should be something like:
Common Clock Framework introduced the need to prepare clocks before
enabling them, otherwise clk_enable() fails. This patch adds
clk_prepare calls to the driver.
and that's all.
What you are observing as CCF pulling clocks down is the fact that
clk_enable() fails if the clock is not prepared and so the clock is
not
enabled in result.
Another thing is that CCF is not pulling anything down. GPIO pins can
be pulled down (or up or not pulled), but clocks can be masked, gated
or simply disabled - this does not imply their signal level.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare()
in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare()
from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 9537761..aa22370
100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device
*pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
Why not just simply use clk_prepare_enable() instead of all calls to
clk_enable() in the driver?
Same goes for s/clk_disable/clk_disable_unprepare/ .
I agree with you. Using clk_prepare_enable() is more clear. Actually I
had already commented on this. Please see the patch v2. But this way
also looks good to me.
Well, both versions are technically correct and will have the same effect
for Exynos SoC clocks, since only enable/disable ops change hardware
state.
However if we look at general meaning of those generic ops, the clock will
remain prepared for all the time the driver is loaded, even if the device
Right, so I said previous one is more clear. I gonna revert current one and
then merge previous one(v3)
is runtime suspended. Again on Exynos SoCs this won't have any effect, but
I think we should respect general Common Clock Framework semantics anyway.
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device
*pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to
make
clk enabled
count zero...
Viresh is right again here.
Ok, you two guys say together this looks wrong so I'd like to take more
checking. I thought that clk-clk_enable is 1 at here and it would be 0
by pm_runtimg_put_sync(). Is there any my missing point?
You're reasoning is correct, but only assuming that runtime PM is
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On 21 April 2013 20:13, Tomasz Figa tomasz.f...@gmail.com wrote:
3) after those two changes, all that remains is to fix compliance with
Common Clock Framework, in other words:
s/clk_enable/clk_prepare_enable/
and
s/clk_disable/clk_disable_unprepare/
We don't have to call clk_{un}prepare() everytime for your platform as
you aren't doing anything in it. So just call them once at probe/remove and
call clk_enable/disable everywhere else.
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On Sunday 21 of April 2013 22:36:08 Inki Dae wrote:
2013/4/21 Tomasz Figa tomasz.f...@gmail.com
Hi,
On Monday 08 of April 2013 16:41:54 Viresh Kumar wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the
FIMD
clocks were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during
exit, since clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks
incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks down,
but calling clk_prepare() before clk_enable() is must now.. that's
it.. nothing more.
I fully agree.
The message should be something like:
Common Clock Framework introduced the need to prepare clocks before
enabling them, otherwise clk_enable() fails. This patch adds
clk_prepare calls to the driver.
and that's all.
What you are observing as CCF pulling clocks down is the fact that
clk_enable() fails if the clock is not prepared and so the clock is
not
enabled in result.
Another thing is that CCF is not pulling anything down. GPIO pins can
be pulled down (or up or not pulled), but clocks can be masked, gated
or simply disabled - this does not imply their signal level.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare()
in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare()
from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 9537761..aa22370
100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device
*pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
Why not just simply use clk_prepare_enable() instead of all calls to
clk_enable() in the driver?
Same goes for s/clk_disable/clk_disable_unprepare/ .
I agree with you. Using clk_prepare_enable() is more clear. Actually I
had already commented on this. Please see the patch v2. But this way
also looks good to me.
Well, both versions are technically correct and will have the same effect
for Exynos SoC clocks, since only enable/disable ops change hardware
state.
However if we look at general meaning of those generic ops, the clock will
remain prepared for all the time the driver is loaded, even if the device
Right, so I said previous one is more clear. I gonna revert current one
and then merge previous one(v3)
is runtime suspended. Again on Exynos SoCs this won't have any effect, but
I think we should respect general Common Clock Framework semantics anyway.
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device
*pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to
make
clk enabled
count zero...
Viresh is right again here.
Ok, you two guys say together this looks wrong so I'd like to take more
checking. I thought that clk-clk_enable is 1 at here and it would be 0
by pm_runtimg_put_sync(). Is there any my missing
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On Monday 22 of April 2013 10:44:00 Viresh Kumar wrote:
On 21 April 2013 20:13, Tomasz Figa tomasz.f...@gmail.com wrote:
3) after those two changes, all that remains is to fix compliance with
Common Clock Framework, in other words:
s/clk_enable/clk_prepare_enable/
and
s/clk_disable/clk_disable_unprepare/
We don't have to call clk_{un}prepare() everytime for your platform as
you aren't doing anything in it. So just call them once at probe/remove and
call clk_enable/disable everywhere else.
Can you assure that in future SoCs, on which this driver will be used, this
assumption will still hold true or even that in current Exynos driver this
behavior won't be changed?
Best regards,
--
Tomasz Figa
Samsung Poland RD Center
SW Solution Development, Kernel and System Framework
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
2013/4/22 Tomasz Figa t.f...@samsung.com
On Sunday 21 of April 2013 22:36:08 Inki Dae wrote:
2013/4/21 Tomasz Figa tomasz.f...@gmail.com
Hi,
On Monday 08 of April 2013 16:41:54 Viresh Kumar wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org
wrote:
While migrating to common clock framework (CCF), I found that
the
FIMD
clocks were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of
the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare()
during
exit, since clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks
incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks
down,
but calling clk_prepare() before clk_enable() is must now..
that's
it.. nothing more.
I fully agree.
The message should be something like:
Common Clock Framework introduced the need to prepare clocks before
enabling them, otherwise clk_enable() fails. This patch adds
clk_prepare calls to the driver.
and that's all.
What you are observing as CCF pulling clocks down is the fact
that
clk_enable() fails if the clock is not prepared and so the clock is
not
enabled in result.
Another thing is that CCF is not pulling anything down. GPIO pins
can
be pulled down (or up or not pulled), but clocks can be masked,
gated
or simply disabled - this does not imply their signal level.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and
clk_unprepare()
in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and
clk_disable_unprepare()
from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and
also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index
9537761..aa22370
100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct
platform_device
*pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
Why not just simply use clk_prepare_enable() instead of all calls
to
clk_enable() in the driver?
Same goes for s/clk_disable/clk_disable_unprepare/ .
I agree with you. Using clk_prepare_enable() is more clear. Actually
I
had already commented on this. Please see the patch v2. But this way
also looks good to me.
Well, both versions are technically correct and will have the same
effect
for Exynos SoC clocks, since only enable/disable ops change hardware
state.
However if we look at general meaning of those generic ops, the clock
will
remain prepared for all the time the driver is loaded, even if the
device
Right, so I said previous one is more clear. I gonna revert current one
and then merge previous one(v3)
is runtime suspended. Again on Exynos SoCs this won't have any effect,
but
I think we should respect general Common Clock Framework semantics
anyway.
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct
platform_device
*pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to
make
clk enabled
count zero...
Viresh is right again here.
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On 04/22/2013 11:56 AM, Tomasz Figa wrote:
On Monday 22 of April 2013 10:44:00 Viresh Kumar wrote:
On 21 April 2013 20:13, Tomasz Figa tomasz.f...@gmail.com wrote:
3) after those two changes, all that remains is to fix compliance with
Common Clock Framework, in other words:
s/clk_enable/clk_prepare_enable/
and
s/clk_disable/clk_disable_unprepare/
We don't have to call clk_{un}prepare() everytime for your platform as
you aren't doing anything in it. So just call them once at probe/remove and
call clk_enable/disable everywhere else.
Yes, I agree with that. Additionally clk_(un)prepare must not be called in
atomic context, so some drivers will have to work like this anyway.
Or the clocks could be prepared/unprepared in the device open/close file op
for instance.
Can you assure that in future SoCs, on which this driver will be used, this
assumption will still hold true or even that in current Exynos driver this
behavior won't be changed?
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On 04/22/2013 12:03 PM, Inki Dae wrote: Also looks good to me. But what if power domain was disabled without pm runtime? In this case, you must enable the power domain at machine code or bootloader somewhere. This way would not only need some hard codes to turn the power domain on but also not manage power management fully. This is same as only the use of pm runtime interface(needing some hard codes without pm runtime) so I don't prefer to add clk_enable/disable to fimd probe(). I quite tend to force only the use of pm runtime as possible. So please add the hard codes to machine code or bootloader like you did for power domain if you want to use drm fimd without pm runtime. That's not how the runtime PM, clock subsystems work: 1) When CONFIG_PM_RUNTIME is disabled, all the used hardware must be kept powered on all the time. 2) Common Clock Framework will always gate all clocks that have zero enable_count. Note that CCF support for Exynos is already merged for 3.10 and it will be the only available clock support method for Exynos. AFAIK, drivers must work correctly in both cases, with CONFIG_PM_RUNTIME enabled and disabled. Then is the driver worked correctly if the power domain to this device was disabled at bootloader without CONFIG_PM_RUNTIME and with clk_enable()? I think, in this case, the device wouldn't be worked correctly because the power of the device remains off. So you must enable the power domain somewhere. What is the difference between these two cases? How about making the driver dependant on PM_RUNTIME and making it always use pm_runtime_* API, regardless if the platform actually implements runtime PM or not ? Is there any issue in using the Runtime PM core always, rather than coding any workarounds in drivers when PM_RUNTIME is disabled ? Thanks, Sylwester ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On Monday 22 of April 2013 12:17:39 Sylwester Nawrocki wrote: On 04/22/2013 12:03 PM, Inki Dae wrote: Also looks good to me. But what if power domain was disabled without pm runtime? In this case, you must enable the power domain at machine code or bootloader somewhere. This way would not only need some hard codes to turn the power domain on but also not manage power management fully. This is same as only the use of pm runtime interface(needing some hard codes without pm runtime) so I don't prefer to add clk_enable/disable to fimd probe(). I quite tend to force only the use of pm runtime as possible. So please add the hard codes to machine code or bootloader like you did for power domain if you want to use drm fimd without pm runtime. That's not how the runtime PM, clock subsystems work: 1) When CONFIG_PM_RUNTIME is disabled, all the used hardware must be kept powered on all the time. 2) Common Clock Framework will always gate all clocks that have zero enable_count. Note that CCF support for Exynos is already merged for 3.10 and it will be the only available clock support method for Exynos. AFAIK, drivers must work correctly in both cases, with CONFIG_PM_RUNTIME enabled and disabled. Then is the driver worked correctly if the power domain to this device was disabled at bootloader without CONFIG_PM_RUNTIME and with clk_enable()? I think, in this case, the device wouldn't be worked correctly because the power of the device remains off. So you must enable the power domain somewhere. What is the difference between these two cases? How about making the driver dependant on PM_RUNTIME and making it always use pm_runtime_* API, regardless if the platform actually implements runtime PM or not ? Is there any issue in using the Runtime PM core always, rather than coding any workarounds in drivers when PM_RUNTIME is disabled ? I don't think this is a good idea. This would mean that any user that from some reasons don't want to use PM_RUNTIME, would not be able to use the driver anymore. Rafael, Kevin, do you have any opinion on this? Best regards, -- Tomasz Figa Samsung Poland RD Center SW Solution Development, Kernel and System Framework ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On 22 April 2013 15:26, Tomasz Figa t.f...@samsung.com wrote: Can you assure that in future SoCs, on which this driver will be used, this assumption will still hold true or even that in current Exynos driver this behavior won't be changed? Probably yes.. Registers for enabling/disabling these clocks should always be on AMBA bus and not on SPI/I2C, i.e. on-soc... and so this will hold true. ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On Monday, April 22, 2013 12:37:36 PM Tomasz Figa wrote: On Monday 22 of April 2013 12:17:39 Sylwester Nawrocki wrote: On 04/22/2013 12:03 PM, Inki Dae wrote: Also looks good to me. But what if power domain was disabled without pm runtime? In this case, you must enable the power domain at machine code or bootloader somewhere. This way would not only need some hard codes to turn the power domain on but also not manage power management fully. This is same as only the use of pm runtime interface(needing some hard codes without pm runtime) so I don't prefer to add clk_enable/disable to fimd probe(). I quite tend to force only the use of pm runtime as possible. So please add the hard codes to machine code or bootloader like you did for power domain if you want to use drm fimd without pm runtime. That's not how the runtime PM, clock subsystems work: 1) When CONFIG_PM_RUNTIME is disabled, all the used hardware must be kept powered on all the time. 2) Common Clock Framework will always gate all clocks that have zero enable_count. Note that CCF support for Exynos is already merged for 3.10 and it will be the only available clock support method for Exynos. AFAIK, drivers must work correctly in both cases, with CONFIG_PM_RUNTIME enabled and disabled. Then is the driver worked correctly if the power domain to this device was disabled at bootloader without CONFIG_PM_RUNTIME and with clk_enable()? I think, in this case, the device wouldn't be worked correctly because the power of the device remains off. So you must enable the power domain somewhere. What is the difference between these two cases? How about making the driver dependant on PM_RUNTIME and making it always use pm_runtime_* API, regardless if the platform actually implements runtime PM or not ? Is there any issue in using the Runtime PM core always, rather than coding any workarounds in drivers when PM_RUNTIME is disabled ? I don't think this is a good idea. This would mean that any user that from some reasons don't want to use PM_RUNTIME, would not be able to use the driver anymore. Rafael, Kevin, do you have any opinion on this? I agree. Drivers should work for CONFIG_PM_RUNTIME unset too and static inline stubs for all runtime PM helpers are available in that case. Thanks, Rafael -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
2013/4/22 Tomasz Figa t.f...@samsung.com On Monday 22 of April 2013 12:17:39 Sylwester Nawrocki wrote: On 04/22/2013 12:03 PM, Inki Dae wrote: Also looks good to me. But what if power domain was disabled without pm runtime? In this case, you must enable the power domain at machine code or bootloader somewhere. This way would not only need some hard codes to turn the power domain on but also not manage power management fully. This is same as only the use of pm runtime interface(needing some hard codes without pm runtime) so I don't prefer to add clk_enable/disable to fimd probe(). I quite tend to force only the use of pm runtime as possible. So please add the hard codes to machine code or bootloader like you did for power domain if you want to use drm fimd without pm runtime. That's not how the runtime PM, clock subsystems work: 1) When CONFIG_PM_RUNTIME is disabled, all the used hardware must be kept powered on all the time. 2) Common Clock Framework will always gate all clocks that have zero enable_count. Note that CCF support for Exynos is already merged for 3.10 and it will be the only available clock support method for Exynos. AFAIK, drivers must work correctly in both cases, with CONFIG_PM_RUNTIME enabled and disabled. Then is the driver worked correctly if the power domain to this device was disabled at bootloader without CONFIG_PM_RUNTIME and with clk_enable()? I think, in this case, the device wouldn't be worked correctly because the power of the device remains off. So you must enable the power domain somewhere. What is the difference between these two cases? How about making the driver dependant on PM_RUNTIME and making it always use pm_runtime_* API, regardless if the platform actually implements runtime PM or not ? Is there any issue in using the Runtime PM core always, rather than coding any workarounds in drivers when PM_RUNTIME is disabled ? I don't think this is a good idea. This would mean that any user that from some reasons don't want to use PM_RUNTIME, would not be able to use the driver anymore. Again. There is any case that the driver isn't worked correctly without CONFIG_PM_RUNTIME and with clk_enable(). Could you guarantee the driver to be worked correctly only adding clk_enable() to probe() without CONFIG_PM_RUNTIME? as I said before, what if the power domain to the device was disabled? Rafael, Kevin, do you have any opinion on this? Best regards, -- Tomasz Figa Samsung Poland RD Center SW Solution Development, Kernel and System Framework ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
2013/4/22 Rafael J. Wysocki r...@sisk.pl On Monday, April 22, 2013 12:37:36 PM Tomasz Figa wrote: On Monday 22 of April 2013 12:17:39 Sylwester Nawrocki wrote: On 04/22/2013 12:03 PM, Inki Dae wrote: Also looks good to me. But what if power domain was disabled without pm runtime? In this case, you must enable the power domain at machine code or bootloader somewhere. This way would not only need some hard codes to turn the power domain on but also not manage power management fully. This is same as only the use of pm runtime interface(needing some hard codes without pm runtime) so I don't prefer to add clk_enable/disable to fimd probe(). I quite tend to force only the use of pm runtime as possible. So please add the hard codes to machine code or bootloader like you did for power domain if you want to use drm fimd without pm runtime. That's not how the runtime PM, clock subsystems work: 1) When CONFIG_PM_RUNTIME is disabled, all the used hardware must be kept powered on all the time. 2) Common Clock Framework will always gate all clocks that have zero enable_count. Note that CCF support for Exynos is already merged for 3.10 and it will be the only available clock support method for Exynos. AFAIK, drivers must work correctly in both cases, with CONFIG_PM_RUNTIME enabled and disabled. Then is the driver worked correctly if the power domain to this device was disabled at bootloader without CONFIG_PM_RUNTIME and with clk_enable()? I think, in this case, the device wouldn't be worked correctly because the power of the device remains off. So you must enable the power domain somewhere. What is the difference between these two cases? How about making the driver dependant on PM_RUNTIME and making it always use pm_runtime_* API, regardless if the platform actually implements runtime PM or not ? Is there any issue in using the Runtime PM core always, rather than coding any workarounds in drivers when PM_RUNTIME is disabled ? I don't think this is a good idea. This would mean that any user that from some reasons don't want to use PM_RUNTIME, would not be able to use the driver anymore. Rafael, Kevin, do you have any opinion on this? I agree. Drivers should work for CONFIG_PM_RUNTIME unset too and static inline stubs for all runtime PM helpers are available in that case. Hi Rafael, The embedded system, at least Exynos SoC case, has the power domain device and this device could be enabled only by pm runtime interface. So the device couldn't be worked correctly without turning the power domain on only calling clk_enable(). In this case, the power domain must be enabled at machine code or bootloader. And the machine without CONFIG_PM_RUNTIME would assume that their own drivers always are enabled so the devices would be worked correctly. Is there any my missing point? Thanks, Inki Dae Thanks, Rafael -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On Monday 22 of April 2013 12:05:49 Sylwester Nawrocki wrote:
On 04/22/2013 11:56 AM, Tomasz Figa wrote:
On Monday 22 of April 2013 10:44:00 Viresh Kumar wrote:
On 21 April 2013 20:13, Tomasz Figa tomasz.f...@gmail.com wrote:
3) after those two changes, all that remains is to fix compliance with
Common Clock Framework, in other words:
s/clk_enable/clk_prepare_enable/
and
s/clk_disable/clk_disable_unprepare/
We don't have to call clk_{un}prepare() everytime for your platform as
you aren't doing anything in it. So just call them once at probe/remove
and
call clk_enable/disable everywhere else.
Yes, I agree with that. Additionally clk_(un)prepare must not be called in
atomic context, so some drivers will have to work like this anyway.
Or the clocks could be prepared/unprepared in the device open/close file op
for instance.
Well, I don't think drivers should make any assumptions how particular clk ops
are implemented on particular platform.
Instead, generic semantics of Common Clock Framework should be obeyed, which
AFAIK are:
1) Each clock must be prepared before enabling.
2) clk_prepare() can not be called from atomic contexts.
3) clk_prepare_enable() can be used instead of clk_prepare() + clk_enable()
when the driver does not need to enable the clock from atomic context.
Since the Exynos DRM FIMD driver does not need to do call any clock operations
in atomic contexts, the approach keeping the clock handling as simple as
possible would be to just replace all clk_{enable,disable} with
clk_{prepare_enable,disable_unprepare}, as I suggested.
CCing Mike, the maintainer of Common Clock Framework, since he's the right
person to pass any judgements when it is about clocks.
Best regards,
--
Tomasz Figa
Samsung Poland RD Center
SW Solution Development, Kernel and System Framework
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On Apr 20, 2013 8:56 PM, Inki Dae inki@samsung.com wrote:
2013/4/19 Vikas Sajjan vikas.saj...@linaro.org
Hi Inki Dae and Viresh,
On 8 April 2013 16:41, Viresh Kumar viresh.ku...@linaro.org wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the
FIMD clocks
were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during
exit, since
clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks down, but
calling clk_prepare() before clk_enable() is must now.. that's it..
nothing more.
what I noticed is the fimd_clock() which in turn calls clk_enable(),
will only be called if the RUNTIME PM is enabled. So the current patch
breaks and display won't appear, if we don't enable the RUNTIME PM. So it
becomes mandatory to enable RUNTIME PM, to FIMD to work.
Right, this is our intention.
I am NOT sure whether it is a good idea make FIMD work if and only if
RUMTIME PM is enabled.
Actually, fimd driver had used not only runtime pm interface but also
clk_enable() at fimd_probe(). But this had induced the reference count pair
issue to clock. The issue was that the clock takes two references with
runtime pm. One is by clk_enable and another is by pm_runtime_get_sync().
So we are forcing only using runtime pm interface.
I guess Mr. Inki Dae can throw more light on this.
Or else make it like the earlier V1 version where clk_prepare_enable()
was called in fimd_probe() itself.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare() in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare() from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 9537761..aa22370 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device
*pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device
*pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to make
clk enabled
count zero...
Viresh had an suggestion, that the original code had a call
clk_disable() in fimd_remove(), which is really NOT required as there is NO
clk_enable() in fimd_probe() and we can right away delete clk_disable()
from fimd_remove().
And also i think i should be breaking this patch into 2, 1st patch for
adding clk_prepare_enable() ( if we want remove dependency on RUNTIME PM )
in fimd_probe() for CCF migration another one for idea of replacing
clk_disable() with adding clk_disable_unprepare() (since we will be adding
clk_prepare_enable() in probe ) in fimd_remove() .
Mr. Inki Dae any thoughts on this.
Sorry for being late. I think clk_prepare/unprepare are nothing to do yet
in case of Exynos but those might be used for in the future so your patch
looks good to me as is.
Applied. :)
thanks Mr. Dae
Thanks,
Inki Dae
--
Thanks and Regards
Vikas Sajjan
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On 20 April 2013 20:56, Inki Dae inki@samsung.com wrote: Sorry for being late. I think clk_prepare/unprepare are nothing to do yet in case of Exynos but those might be used for in the future so your patch looks good to me as is. Applied. :) And you think the comments i gave were incorrect then? Why? ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
Hi,
On Monday 08 of April 2013 16:41:54 Viresh Kumar wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the FIMD
clocks were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during
exit, since clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks down, but
calling clk_prepare() before clk_enable() is must now.. that's it..
nothing more.
I fully agree.
The message should be something like:
Common Clock Framework introduced the need to prepare clocks before
enabling them, otherwise clk_enable() fails. This patch adds clk_prepare
calls to the driver.
and that's all.
What you are observing as CCF pulling clocks down is the fact that
clk_enable() fails if the clock is not prepared and so the clock is not
enabled in result.
Another thing is that CCF is not pulling anything down. GPIO pins can be
pulled down (or up or not pulled), but clocks can be masked, gated or
simply disabled - this does not imply their signal level.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare() in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare() from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 9537761..aa22370
100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device
*pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
Why not just simply use clk_prepare_enable() instead of all calls to
clk_enable() in the driver?
Same goes for s/clk_disable/clk_disable_unprepare/ .
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device
*pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to make
clk enabled
count zero...
Viresh is right again here.
Best regards,
Tomasz
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On Sunday 21 of April 2013 13:23:10 Viresh Kumar wrote: On 20 April 2013 20:56, Inki Dae inki@samsung.com wrote: Sorry for being late. I think clk_prepare/unprepare are nothing to do yet in case of Exynos but those might be used for in the future so your patch looks good to me as is. Applied. :) Hmm. Now, after searching for this thread in dri-devel archives, I'm wondering why I haven't received some of messages from this thread through linux-samsung-soc mailing list... I believe linux-samsung-soc list exists to collect all threads related to Samsung SoCs for people that don't want to subscribe to lists like dri- devel, on which there is a lot of threads irrelevant to them, with the risk of missing the important ones. Please always make sure that any discussion about Samsung SoCs (patches in particular) is going through linux-samsung-soc as well. Thanks in advance. Best regards, Tomasz ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
2013/4/21 Tomasz Figa tomasz.f...@gmail.com
Hi,
On Monday 08 of April 2013 16:41:54 Viresh Kumar wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the FIMD
clocks were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during
exit, since clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks down, but
calling clk_prepare() before clk_enable() is must now.. that's it..
nothing more.
I fully agree.
The message should be something like:
Common Clock Framework introduced the need to prepare clocks before
enabling them, otherwise clk_enable() fails. This patch adds clk_prepare
calls to the driver.
and that's all.
What you are observing as CCF pulling clocks down is the fact that
clk_enable() fails if the clock is not prepared and so the clock is not
enabled in result.
Another thing is that CCF is not pulling anything down. GPIO pins can be
pulled down (or up or not pulled), but clocks can be masked, gated or
simply disabled - this does not imply their signal level.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare() in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare() from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 9537761..aa22370
100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device
*pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
Why not just simply use clk_prepare_enable() instead of all calls to
clk_enable() in the driver?
Same goes for s/clk_disable/clk_disable_unprepare/ .
I agree with you. Using clk_prepare_enable() is more clear. Actually I had
already commented on this. Please see the patch v2. But this way also looks
good to me.
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device
*pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to make
clk enabled
count zero...
Viresh is right again here.
Ok, you two guys say together this looks wrong so I'd like to take more
checking. I thought that clk-clk_enable is 1 at here and it would be 0 by
pm_runtimg_put_sync(). Is there any my missing point?
Best regards,
Tomasz
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
Hi Inki, On Sunday 21 of April 2013 23:05:45 Inki Dae wrote: 2013/4/21 Tomasz Figa tomasz.f...@gmail.com On Sunday 21 of April 2013 13:23:10 Viresh Kumar wrote: On 20 April 2013 20:56, Inki Dae inki@samsung.com wrote: Sorry for being late. I think clk_prepare/unprepare are nothing to do yet in case of Exynos but those might be used for in the future so your patch looks good to me as is. Applied. :) Hmm. Now, after searching for this thread in dri-devel archives, I'm wondering why I haven't received some of messages from this thread through linux-samsung-soc mailing list... I believe linux-samsung-soc list exists to collect all threads related to Samsung SoCs for people that don't want to subscribe to lists like dri- devel, on which there is a lot of threads irrelevant to them, with the risk of missing the important ones. Please always make sure that any discussion about Samsung SoCs (patches in particular) is going through linux-samsung-soc as well. Thanks for your advice. As you said, some people might not want to subscribe to some mainling lists they don't want. And I think that the main mailing list on this patch is dri-devel so you must receive this email thread if you subscribed to the dri-devel. I agree that dri-devel is the target mailing list for DRM patches, but AFAIK all threads related to Samsung SoCs should be sent to linux-samsung- soc as well. For example, I don't subscribe dri-devel, but I do linux-samsung-soc, because all I want to follow is all the works related to Samsung SoCs. Remaining threads on dri-devel are outside of my competencies. Anyway it would be best to share this all mailing lists included in this email thread but if so, I have no doubt to receive email bumb. :( Hmm, you don't have to subscribe to a mailing list to post to it. Actually I'm wondering if the fact that your previous messages did not get to the linux-samsung-soc list was not caused by presence of HTML part in your messages, which is strongly discouraged on all mailing lists and actually blocked on vger.kernel.org where linux-samsung-soc is hosted. Best regards, Tomasz ___ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
Hi Inki,
On Sunday 21 of April 2013 22:36:08 Inki Dae wrote:
2013/4/21 Tomasz Figa tomasz.f...@gmail.com
Hi,
On Monday 08 of April 2013 16:41:54 Viresh Kumar wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the
FIMD
clocks were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during
exit, since clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks
incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks down,
but calling clk_prepare() before clk_enable() is must now.. that's
it.. nothing more.
I fully agree.
The message should be something like:
Common Clock Framework introduced the need to prepare clocks before
enabling them, otherwise clk_enable() fails. This patch adds
clk_prepare calls to the driver.
and that's all.
What you are observing as CCF pulling clocks down is the fact that
clk_enable() fails if the clock is not prepared and so the clock is
not
enabled in result.
Another thing is that CCF is not pulling anything down. GPIO pins can
be pulled down (or up or not pulled), but clocks can be masked, gated
or simply disabled - this does not imply their signal level.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare()
in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare()
from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 9537761..aa22370
100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device
*pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
Why not just simply use clk_prepare_enable() instead of all calls to
clk_enable() in the driver?
Same goes for s/clk_disable/clk_disable_unprepare/ .
I agree with you. Using clk_prepare_enable() is more clear. Actually I
had already commented on this. Please see the patch v2. But this way
also looks good to me.
Well, both versions are technically correct and will have the same effect
for Exynos SoC clocks, since only enable/disable ops change hardware
state.
However if we look at general meaning of those generic ops, the clock will
remain prepared for all the time the driver is loaded, even if the device
is runtime suspended. Again on Exynos SoCs this won't have any effect, but
I think we should respect general Common Clock Framework semantics anyway.
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device
*pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to
make
clk enabled
count zero...
Viresh is right again here.
Ok, you two guys say together this looks wrong so I'd like to take more
checking. I thought that clk-clk_enable is 1 at here and it would be 0
by pm_runtimg_put_sync(). Is there any my missing point?
You're reasoning is correct, but only assuming that runtime PM is enabled.
When it is disabled, pm_runtime_put_sync() is a no-op.
Well, after digging into the exynos_drm_fimd driver a bit more, it seems
like its power management code needs a serious rework, because I was able
to find more problems:
1) fimd_activate()
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
2013/4/19 Vikas Sajjan vikas.saj...@linaro.org
Hi Inki Dae and Viresh,
On 8 April 2013 16:41, Viresh Kumar viresh.ku...@linaro.org wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the FIMD
clocks
were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during
exit, since
clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks incorrect
to me.
This patch doesn't have anything to do with CCF pulling clocks down, but
calling clk_prepare() before clk_enable() is must now.. that's it..
nothing more.
what I noticed is the fimd_clock() which in turn calls clk_enable(),
will only be called if the RUNTIME PM is enabled. So the current patch
breaks and display won't appear, if we don't enable the RUNTIME PM. So it
becomes mandatory to enable RUNTIME PM, to FIMD to work.
Right, this is our intention.
I am NOT sure whether it is a good idea make FIMD work if and only if
RUMTIME PM is enabled.
Actually, fimd driver had used not only runtime pm interface but also
clk_enable() at fimd_probe(). But this had induced the reference count pair
issue to clock. The issue was that the clock takes two references with
runtime pm. One is by clk_enable and another is by pm_runtime_get_sync().
So we are forcing only using runtime pm interface.
I guess Mr. Inki Dae can throw more light on this.
Or else make it like the earlier V1 version where clk_prepare_enable() was
called in fimd_probe() itself.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare() in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare() from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also
replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 9537761..aa22370 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device *pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to make
clk enabled
count zero...
Viresh had an suggestion, that the original code had a call
clk_disable() in fimd_remove(), which is really NOT required as there is NO
clk_enable() in fimd_probe() and we can right away delete clk_disable()
from fimd_remove().
And also i think i should be breaking this patch into 2, 1st patch for
adding clk_prepare_enable() ( if we want remove dependency on RUNTIME PM )
in fimd_probe() for CCF migration another one for idea of replacing
clk_disable() with adding clk_disable_unprepare() (since we will be adding
clk_prepare_enable() in probe ) in fimd_remove() .
Mr. Inki Dae any thoughts on this.
Sorry for being late. I think clk_prepare/unprepare are nothing to do yet
in case of Exynos but those might be used for in the future so your patch
looks good to me as is.
Applied. :)
Thanks,
Inki Dae
--
Thanks and Regards
Vikas Sajjan
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
Hi Inki Dae and Viresh,
On 8 April 2013 16:41, Viresh Kumar viresh.ku...@linaro.org wrote:
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the FIMD
clocks
were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during exit,
since
clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks incorrect to
me.
This patch doesn't have anything to do with CCF pulling clocks down, but
calling clk_prepare() before clk_enable() is must now.. that's it..
nothing more.
what I noticed is the fimd_clock() which in turn calls clk_enable(),
will only be called if the RUNTIME PM is enabled. So the current patch
breaks and display won't appear, if we don't enable the RUNTIME PM. So it
becomes mandatory to enable RUNTIME PM, to FIMD to work.
I am NOT sure whether it is a good idea make FIMD work if and only if
RUMTIME PM is enabled.
I guess Mr. Inki Dae can throw more light on this.
Or else make it like the earlier V1 version where clk_prepare_enable() was
called in fimd_probe() itself.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare() in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare() from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 9537761..aa22370 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device *pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to make
clk enabled
count zero...
Viresh had an suggestion, that the original code had a call
clk_disable() in fimd_remove(), which is really NOT required as there is NO
clk_enable() in fimd_probe() and we can right away delete clk_disable()
from fimd_remove().
And also i think i should be breaking this patch into 2, 1st patch for
adding clk_prepare_enable() ( if we want remove dependency on RUNTIME PM )
in fimd_probe() for CCF migration another one for idea of replacing
clk_disable() with adding clk_disable_unprepare() (since we will be adding
clk_prepare_enable() in probe ) in fimd_remove() .
Mr. Inki Dae any thoughts on this.
--
Thanks and Regards
Vikas Sajjan
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v4] drm/exynos: prepare FIMD clocks
On 8 April 2013 16:37, Vikas Sajjan vikas.saj...@linaro.org wrote:
While migrating to common clock framework (CCF), I found that the FIMD clocks
were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also replaces clk_disable() with clk_unprepare() during exit, since
clk_prepare() is called in fimd_probe().
I asked you about fixing your commit log too.. It still looks incorrect to me.
This patch doesn't have anything to do with CCF pulling clocks down, but
calling clk_prepare() before clk_enable() is must now.. that's it..
nothing more.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
Changes since v3:
- added clk_prepare() in fimd_probe() and clk_unprepare() in
fimd_remove()
as suggested by Viresh Kumar viresh.ku...@linaro.org
Changes since v2:
- moved clk_prepare_enable() and clk_disable_unprepare() from
fimd_probe() to fimd_clock() as suggested by Inki Dae
inki@samsung.com
Changes since v1:
- added error checking for clk_prepare_enable() and also replaced
clk_disable() with clk_disable_unprepare() during exit.
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 9537761..aa22370 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -934,6 +934,16 @@ static int fimd_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare(ctx-bus_clk);
+ if (ret 0)
+ return ret;
+
+ ret = clk_prepare(ctx-lcd_clk);
+ if (ret 0) {
+ clk_unprepare(ctx-bus_clk);
+ return ret;
+ }
+
ctx-vidcon0 = pdata-vidcon0;
ctx-vidcon1 = pdata-vidcon1;
ctx-default_win = pdata-default_win;
@@ -981,8 +991,8 @@ static int fimd_remove(struct platform_device *pdev)
if (ctx-suspended)
goto out;
- clk_disable(ctx-lcd_clk);
- clk_disable(ctx-bus_clk);
+ clk_unprepare(ctx-lcd_clk);
+ clk_unprepare(ctx-bus_clk);
This looks wrong again.. You still need to call clk_disable() to make
clk enabled
count zero...
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
