[PATCH AUTOSEL 5.2 41/76] drm/msm/dpu: Correct dpu encoder spinlock initialization
From: Shubhashree Dhar [ Upstream commit 2e7b801eadbf327bf61041c943e5c44a5de4b0e5 ] dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of modeset init. Signed-off-by: Shubhashree Dhar [seanpaul resolved conflict in old init removal and revised the commit message] Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/1561357632-15361-1-git-send-email-d...@codeaurora.org Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 0ea1501966594..c62f7abcf509c 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2226,8 +2226,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout_ms, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2281,6 +2279,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base; -- 2.20.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: drm/msm/dpu: Correct dpu encoder spinlock initialization
On Mon, Jun 24, 2019 at 11:57:12AM +0530, Shubhashree Dhar wrote: > dpu encoder spinlock should be initialized during dpu encoder > init instead of dpu encoder setup which is part of commit. > There are chances that vblank control uses the uninitialized > spinlock if not initialized during encoder init. > > Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e > Signed-off-by: Shubhashree Dhar Thanks for your patch. I've resolved the conflict and tweaked the commit message a bit to reflect current reality. Applied to drm-misc-fixes for 5.3 Sean > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index 5f085b5..22938c7 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct > drm_encoder *enc, > if (ret) > goto fail; > > - spin_lock_init(&dpu_enc->enc_spinlock); > - > atomic_set(&dpu_enc->frame_done_timeout, 0); > timer_setup(&dpu_enc->frame_done_timer, > dpu_encoder_frame_done_timeout, 0); > @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device > *dev, > > drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); > > + spin_lock_init(&dpu_enc->enc_spinlock); > dpu_enc->enabled = false; > > return &dpu_enc->base; > -- > 1.9.1 > -- Sean Paul, Software Engineer, Google / Chromium OS
Re: drm/msm/dpu: Correct dpu encoder spinlock initialization
On 2019-07-02 11:21, Jeykumar Sankaran wrote: On 2019-07-01 03:29, d...@codeaurora.org wrote: On 2019-06-26 03:10, Jeykumar Sankaran wrote: On 2019-06-24 22:44, d...@codeaurora.org wrote: On 2019-06-25 03:56, Jeykumar Sankaran wrote: On 2019-06-23 23:27, Shubhashree Dhar wrote: dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of commit. There are chances that vblank control uses the uninitialized spinlock if not initialized during encoder init. Not much can be done if someone is performing a vblank operation before encoder_setup is done. Can you point to the path where this lock is acquired before the encoder_setup? Thanks Jeykumar S. When running some dp usecase, we are hitting this callstack. Process kworker/u16:8 (pid: 215, stack limit = 0xdf9dd930) Call trace: spin_dump+0x84/0x8c spin_dump+0x0/0x8c do_raw_spin_lock+0x80/0xb0 _raw_spin_lock_irqsave+0x34/0x44 dpu_encoder_toggle_vblank_for_crtc+0x8c/0xe8 dpu_crtc_vblank+0x168/0x1a0 dpu_kms_enable_vblank+0[ 11.648998] vblank_ctrl_worker+0x3c/0x60 process_one_work+0x16c/0x2d8 worker_thread+0x1d8/0x2b0 kthread+0x124/0x134 Looks like vblank is getting enabled earlier causing this issue and we are using the spinlock without initializing it. Thanks, Shubhashree DP calls into set_encoder_mode during hotplug before even notifying the u/s. Can you trace out the original caller of this stack? Even though the patch is harmless, I am not entirely convinced to move this initialization. Any call which acquires the lock before encoder_setup will be a no-op since there will not be any physical encoder to work with. Thanks and Regards, Jeykumar S. Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e Signed-off-by: Shubhashree Dhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 5f085b5..22938c7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base; In dpu_crtc_vblank(), we are looping through all the encoders in the present mode_config: https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/msm/disp/dpu 1/dpu_crtc.c#L1082 and hence calling dpu_encoder_toggle_vblank_for_crtc() for all the encoders. But in dpu_encoder_toggle_vblank_for_crtc(), after acquiring the spinlock, we will do a early return for the encoders which are not currently assigned to our crtc: https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/msm/disp/dpu 1/dpu_encoder.c#L1318. Since the encoder_setup for the secondary encoder(dp encoder in this case) is not called until dp hotplug, we are hitting kernel panic while acquiring the lock. This is the sequence in which the events are expected to happen: 1) DP connector is instantiated with an inactive state 2) Hot plug on DP 3) DP connector is activated 4) User space attaches a CRTC to the activated connector 5) CRTC is enabled 6) CRTC_VBLANK_ON is called 7) dpu_crtc_vblank is called. So can you help tracing out why dpu_crtc_vblank is called when the connector is not activated yet (no hotplug)? Overlooked the loop which iterates through *all* the encoders irrespective of their activated status. Reviewed-by: Jeykumar Sankaran ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: drm/msm/dpu: Correct dpu encoder spinlock initialization
On 2019-07-01 03:29, d...@codeaurora.org wrote: On 2019-06-26 03:10, Jeykumar Sankaran wrote: On 2019-06-24 22:44, d...@codeaurora.org wrote: On 2019-06-25 03:56, Jeykumar Sankaran wrote: On 2019-06-23 23:27, Shubhashree Dhar wrote: dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of commit. There are chances that vblank control uses the uninitialized spinlock if not initialized during encoder init. Not much can be done if someone is performing a vblank operation before encoder_setup is done. Can you point to the path where this lock is acquired before the encoder_setup? Thanks Jeykumar S. When running some dp usecase, we are hitting this callstack. Process kworker/u16:8 (pid: 215, stack limit = 0xdf9dd930) Call trace: spin_dump+0x84/0x8c spin_dump+0x0/0x8c do_raw_spin_lock+0x80/0xb0 _raw_spin_lock_irqsave+0x34/0x44 dpu_encoder_toggle_vblank_for_crtc+0x8c/0xe8 dpu_crtc_vblank+0x168/0x1a0 dpu_kms_enable_vblank+0[ 11.648998] vblank_ctrl_worker+0x3c/0x60 process_one_work+0x16c/0x2d8 worker_thread+0x1d8/0x2b0 kthread+0x124/0x134 Looks like vblank is getting enabled earlier causing this issue and we are using the spinlock without initializing it. Thanks, Shubhashree DP calls into set_encoder_mode during hotplug before even notifying the u/s. Can you trace out the original caller of this stack? Even though the patch is harmless, I am not entirely convinced to move this initialization. Any call which acquires the lock before encoder_setup will be a no-op since there will not be any physical encoder to work with. Thanks and Regards, Jeykumar S. Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e Signed-off-by: Shubhashree Dhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 5f085b5..22938c7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base; In dpu_crtc_vblank(), we are looping through all the encoders in the present mode_config: https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/msm/disp/dpu 1/dpu_crtc.c#L1082 and hence calling dpu_encoder_toggle_vblank_for_crtc() for all the encoders. But in dpu_encoder_toggle_vblank_for_crtc(), after acquiring the spinlock, we will do a early return for the encoders which are not currently assigned to our crtc: https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/msm/disp/dpu 1/dpu_encoder.c#L1318. Since the encoder_setup for the secondary encoder(dp encoder in this case) is not called until dp hotplug, we are hitting kernel panic while acquiring the lock. This is the sequence in which the events are expected to happen: 1) DP connector is instantiated with an inactive state 2) Hot plug on DP 3) DP connector is activated 4) User space attaches a CRTC to the activated connector 5) CRTC is enabled 6) CRTC_VBLANK_ON is called 7) dpu_crtc_vblank is called. So can you help tracing out why dpu_crtc_vblank is called when the connector is not activated yet (no hotplug)? -- Jeykumar S ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: drm/msm/dpu: Correct dpu encoder spinlock initialization
On 2019-06-26 03:10, Jeykumar Sankaran wrote: On 2019-06-24 22:44, d...@codeaurora.org wrote: On 2019-06-25 03:56, Jeykumar Sankaran wrote: On 2019-06-23 23:27, Shubhashree Dhar wrote: dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of commit. There are chances that vblank control uses the uninitialized spinlock if not initialized during encoder init. Not much can be done if someone is performing a vblank operation before encoder_setup is done. Can you point to the path where this lock is acquired before the encoder_setup? Thanks Jeykumar S. When running some dp usecase, we are hitting this callstack. Process kworker/u16:8 (pid: 215, stack limit = 0xdf9dd930) Call trace: spin_dump+0x84/0x8c spin_dump+0x0/0x8c do_raw_spin_lock+0x80/0xb0 _raw_spin_lock_irqsave+0x34/0x44 dpu_encoder_toggle_vblank_for_crtc+0x8c/0xe8 dpu_crtc_vblank+0x168/0x1a0 dpu_kms_enable_vblank+0[ 11.648998] vblank_ctrl_worker+0x3c/0x60 process_one_work+0x16c/0x2d8 worker_thread+0x1d8/0x2b0 kthread+0x124/0x134 Looks like vblank is getting enabled earlier causing this issue and we are using the spinlock without initializing it. Thanks, Shubhashree DP calls into set_encoder_mode during hotplug before even notifying the u/s. Can you trace out the original caller of this stack? Even though the patch is harmless, I am not entirely convinced to move this initialization. Any call which acquires the lock before encoder_setup will be a no-op since there will not be any physical encoder to work with. Thanks and Regards, Jeykumar S. Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e Signed-off-by: Shubhashree Dhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 5f085b5..22938c7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base; In dpu_crtc_vblank(), we are looping through all the encoders in the present mode_config: https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c#L1082 and hence calling dpu_encoder_toggle_vblank_for_crtc() for all the encoders. But in dpu_encoder_toggle_vblank_for_crtc(), after acquiring the spinlock, we will do a early return for the encoders which are not currently assigned to our crtc: https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L1318. Since the encoder_setup for the secondary encoder(dp encoder in this case) is not called until dp hotplug, we are hitting kernel panic while acquiring the lock.
Re: drm/msm/dpu: Correct dpu encoder spinlock initialization
On 2019-06-24 22:44, d...@codeaurora.org wrote: On 2019-06-25 03:56, Jeykumar Sankaran wrote: On 2019-06-23 23:27, Shubhashree Dhar wrote: dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of commit. There are chances that vblank control uses the uninitialized spinlock if not initialized during encoder init. Not much can be done if someone is performing a vblank operation before encoder_setup is done. Can you point to the path where this lock is acquired before the encoder_setup? Thanks Jeykumar S. When running some dp usecase, we are hitting this callstack. Process kworker/u16:8 (pid: 215, stack limit = 0xdf9dd930) Call trace: spin_dump+0x84/0x8c spin_dump+0x0/0x8c do_raw_spin_lock+0x80/0xb0 _raw_spin_lock_irqsave+0x34/0x44 dpu_encoder_toggle_vblank_for_crtc+0x8c/0xe8 dpu_crtc_vblank+0x168/0x1a0 dpu_kms_enable_vblank+0[ 11.648998] vblank_ctrl_worker+0x3c/0x60 process_one_work+0x16c/0x2d8 worker_thread+0x1d8/0x2b0 kthread+0x124/0x134 Looks like vblank is getting enabled earlier causing this issue and we are using the spinlock without initializing it. Thanks, Shubhashree DP calls into set_encoder_mode during hotplug before even notifying the u/s. Can you trace out the original caller of this stack? Even though the patch is harmless, I am not entirely convinced to move this initialization. Any call which acquires the lock before encoder_setup will be a no-op since there will not be any physical encoder to work with. Thanks and Regards, Jeykumar S. Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e Signed-off-by: Shubhashree Dhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 5f085b5..22938c7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base; -- Jeykumar S
Re: drm/msm/dpu: Correct dpu encoder spinlock initialization
On 2019-06-25 03:56, Jeykumar Sankaran wrote: On 2019-06-23 23:27, Shubhashree Dhar wrote: dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of commit. There are chances that vblank control uses the uninitialized spinlock if not initialized during encoder init. Not much can be done if someone is performing a vblank operation before encoder_setup is done. Can you point to the path where this lock is acquired before the encoder_setup? Thanks Jeykumar S. When running some dp usecase, we are hitting this callstack. Process kworker/u16:8 (pid: 215, stack limit = 0xdf9dd930) Call trace: spin_dump+0x84/0x8c spin_dump+0x0/0x8c do_raw_spin_lock+0x80/0xb0 _raw_spin_lock_irqsave+0x34/0x44 dpu_encoder_toggle_vblank_for_crtc+0x8c/0xe8 dpu_crtc_vblank+0x168/0x1a0 dpu_kms_enable_vblank+0[ 11.648998] vblank_ctrl_worker+0x3c/0x60 process_one_work+0x16c/0x2d8 worker_thread+0x1d8/0x2b0 kthread+0x124/0x134 Looks like vblank is getting enabled earlier causing this issue and we are using the spinlock without initializing it. Thanks, Shubhashree Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e Signed-off-by: Shubhashree Dhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 5f085b5..22938c7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base;
Re: drm/msm/dpu: Correct dpu encoder spinlock initialization
On 2019-06-23 23:27, Shubhashree Dhar wrote: dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of commit. There are chances that vblank control uses the uninitialized spinlock if not initialized during encoder init. Not much can be done if someone is performing a vblank operation before encoder_setup is done. Can you point to the path where this lock is acquired before the encoder_setup? Thanks Jeykumar S. Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e Signed-off-by: Shubhashree Dhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 5f085b5..22938c7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base; -- Jeykumar S
drm/msm/dpu: Correct dpu encoder spinlock initialization
dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of commit. There are chances that vblank control uses the uninitialized spinlock if not initialized during encoder init. Change-Id: I5a18b95fa47397c834a266b22abf33a517b03a4e Signed-off-by: Shubhashree Dhar --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 5f085b5..22938c7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2195,8 +2195,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, if (ret) goto fail; - spin_lock_init(&dpu_enc->enc_spinlock); - atomic_set(&dpu_enc->frame_done_timeout, 0); timer_setup(&dpu_enc->frame_done_timer, dpu_encoder_frame_done_timeout, 0); @@ -2250,6 +2248,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs); + spin_lock_init(&dpu_enc->enc_spinlock); dpu_enc->enabled = false; return &dpu_enc->base; -- 1.9.1