[Dri-devel] mach64 binary snapshots: little bug in install.sh
Hi all I think it if for Jose. One little bug in the install.sh. It runs ldconfig even if /usr/X11R6/lib is in ld.so.conf. So probably ldconfig should be put together with adding /usr/X11R6/lib to ld.so.conf (i.e. inside if statement). Not really a bug, just annoying thing (to wait for ldconfig to complete). Cheers, Sergey ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
Re: [Dri-devel] Mach64: Artefacts on the right and bottom edge ofthe screen
On Fri, 29 Mar 2002, Felix Kühling wrote: Only 16 and 32 bit depths are currently supported. 32 bit is mostly untested, I think. I'm suprised you actually get direct rendering with 15 or 24, I thought it would be disabled. It was slower than 16 bit with both 15 and 24 bits, but still a lot faster than indirect rendering. Strange, when I try to start the xserver with 32 bits I get the following messages in the end of XFree86.0.log: (EE) ATI(0): Driver does not support depth 32 at fbbpp 32. (II) UnloadModule: ati (II) UnloadModule: atimisc (II) Unloading /usr/X11R6-mach64003/lib/modules/drivers/atimisc_drv.o (EE) Screen(s) found, but none have a usable configuration. OK, here's what I've found out. The DDX driver doesn't support depth 32 at fbbpp 32, but depth 24 at fbbpp 32 is supported, so using a depth of 24 in XF86Config should work. I just discovered that the problem with depth 24 is with the depth buffer. I should have that fixed soon. Running at depth 15 should disable direct rendering right now. The problem was that the framebuffer bpp is still 16 with depth 15, and the driver was looking at the framebuffer bpp, so direct rendering wasn't being disabled. -- Leif Delgass http://www.retinalburn.net ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Dri-devel] Radeon Converted to DrmCommand Interface
I've checked into the drmcommand-0-0-1-branch the complete conversion of the Radeon driver suite to the drmCommand interface. Take a look, and let me know if you see any problems, or if you have any questions. If anyone is interested in converting any of the other drivers, please let me know and we'll coordinate the work. I won't be able to get to any of the other drivers until sometime next week. Regards, Jens -- /\ Jens Owen/ \/\ _ [EMAIL PROTECTED] /\ \ \ Steamboat Springs, Colorado ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Dri-devel] Have Great Sex bwg
To be removed from future mailings CLICK HERE uowtmctwjvghuykclglpevyvv ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel