[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2004-10-15 19:00 --- Workaround committed, please report any further problems. -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-14 19:13 --- dbg = 0x6 fixes this on my box as well. It doesn't seem to effect any games I've tried (including darkplaces and quake3) so can this be committed to cvs? -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-10 15:58 --- Created an attachment (id=1083) -- (https://freedesktop.org/bugzilla/attachment.cgi?id=1083action=view) dbg = 0x6 setting Off of clean CVS I could get a lockup in under 30 seconds. Changing dbg = 0x0 to 0x6 cleared it up. Do we know what exactly dbg = 0x6 does? Are there significant downsides? -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-07 12:17 --- I think I made a mistake with my original testing. It seems to only trigger when it wants too. Heavily loading the card will always make it trigger if I set anisotropy, but heavily loading the card without setting anisotropy OR not heavily loading the card and setting it won't trigger it. I'm really confused, and I'm wondering if it might me some hardware issue (ie, the radeon is overheating a little and anisotropy is causing it to crash). So, unless I go play a game for awhile (with anisotropy not set) and then try the test, it won't trigger. What gives? -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-07 14:54 --- (In reply to comment #6) I'm really confused, and I'm wondering if it might me some hardware issue (ie, the radeon is overheating a little and anisotropy is causing it to crash). I doubt it's a hardware issue (could be of course). I'd suggest you try a newer snapshot, some state emit changes were commited after the snapshot you're using, which could potentially fix occasional lockups. -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-06 02:18 --- Are you sure it does not lockup if you simply omit the aniso tex parameter call? I can't see any reason why setting it to 1 would be any different than not calling it at all. I've tried the test case and as expected it did not lock up (rv250) (for 5 minutes). Yes, I'm quite sure. I ran it with anisotropy not set at all, and it ran for over a half hour with no lock ups, but testing it with 1 caused it to lock up within 5 minutes, and setting it above one (the highest setting, 16, in this case) causes it to lock up. Could it be a hardware bug that was fixed in rv250/280 series cards? Because I have a true R200. Additional notes: I originally came across this bug when playing with DarkPlaces, a very popular Quake engine fork. It locked up every once in awhile, and I couldn't understand why. So, one day, I decided to figure what did it. I turned off all the GL extensions using command line flags, and slowly turned each GL extension on until I found which one was crashing. The last on the long list was the anisotropy extention, which would cause it to lock up. Then, I built this little test to make sure it was that, and as you can see, that is in fact whats doing it. Even More Info: I'm currently on a Pentium 3 system, which uses a 82443BX/ZX/DX (rev 03) AGP controller. My card identifies itself as a Radeon R200 QM. I'm using Felix Kuehling's 20041002 cvs snapshot on 2.6.8.1. -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-06 17:03 --- (In reply to comment #4) Are you sure it does not lockup if you simply omit the aniso tex parameter call? I can't see any reason why setting it to 1 would be any different than not calling it at all. I've tried the test case and as expected it did not lock up (rv250) (for 5 minutes). Yes, I'm quite sure. I ran it with anisotropy not set at all, and it ran for over a half hour with no lock ups, but testing it with 1 caused it to lock up within 5 minutes, and setting it above one (the highest setting, 16, in this case) causes it to lock up. I don't doubt that aniso could cause lockups. But setting it to 1 will do absolutely nothing (as it's the default value), and in fact the code for setting aniso and the filter parameters is the same in the r200 driver - I just can't see a reason why it would make a difference if you call it (it will execute exactly the same code again as it did when you changed the filter parameter). Could it be a hardware bug that was fixed in rv250/280 series cards? Because I have a true R200. Possible, yes. You could try experimenting what combinations make it lockup (MIN filter might make a difference, especially if it uses mip maps or not). -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-05 17:31 --- Created an attachment (id=1020) -- (https://freedesktop.org/bugzilla/attachment.cgi?id=1020action=view) patch which changes tam emit order Are you sure it does not lockup if you simply omit the aniso tex parameter call? I can't see any reason why setting it to 1 would be any different than not calling it at all. I've tried the test case and as expected it did not lock up (rv250) (for 5 minutes). You could try the attached patch (emit the tam after the tex state atoms - this is just a shot in the dark). You could also enable the debug printf at the bottom of r200_texstate.c to see if the hang workaround code really gets triggered (as far as I can see, it should if you use aniso 1). -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-05 18:18 --- (In reply to comment #2) You could also enable the debug printf at the bottom of r200_texstate.c to see if the hang workaround code really gets triggered (as far as I can see, it should if you use aniso 1). Scrap that. The LRU hang workaround will only get triggered if you don't use mipmaps at all. -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
[Bug 1519] Enabling Anisotropy Locks r200 Driver
Please do not reply to this email: if you want to comment on the bug, go to the URL shown below and enter yourcomments there. https://freedesktop.org/bugzilla/show_bug.cgi?id=1519 --- Additional Comments From [EMAIL PROTECTED] 2004-10-03 18:53 --- Created an attachment (id=999) -- (https://freedesktop.org/bugzilla/attachment.cgi?id=999action=view) Test Case -- Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are the assignee for the bug, or are watching the assignee. --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- ___ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel