Rename CamelCase variables and function name.
Signed-off-by: navin patidar <navin.pati...@gmail.com>
---
drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c | 98 +++++++++--------------
1 file changed, 37 insertions(+), 61 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
index c33da36..89ec958 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
@@ -259,102 +259,78 @@ PHY_SetTxPowerLevel8188E(
rtl8188e_PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0],
&BW20PowerLevel[0], &BW40PowerLevel[0], channel);
}
-/*-----------------------------------------------------------------------------
- * Function: PHY_SetBWModeCallback8192C()
- *
- * Overview: Timer callback function for SetSetBWMode
- *
- * Input: PRT_TIMER pTimer
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Note: (1) We do not take j mode into consideration now
- * (2) Will two workitem of "switch channel" and "switch
channel bandwidth" run
- * concurrently?
- *---------------------------------------------------------------------------*/
-static void
-_PHY_SetBWMode92C(
- struct adapter *Adapter
-)
+static void phy_set_bw_mode_callback(struct adapter *adapt)
{
- struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
- u8 regBwOpMode;
- u8 regRRSR_RSC;
+ struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
+ u8 reg_bw_opmode;
+ u8 reg_prsr_rsc;
- if (pHalData->rf_chip == RF_PSEUDO_11N)
+ if (hal_data->rf_chip == RF_PSEUDO_11N)
return;
/* There is no 40MHz mode in RF_8225. */
- if (pHalData->rf_chip == RF_8225)
+ if (hal_data->rf_chip == RF_8225)
return;
- if (Adapter->bDriverStopped)
+ if (adapt->bDriverStopped)
return;
- /* 3 */
- /* 3<1>Set MAC register */
- /* 3 */
+ /* Set MAC register */
- regBwOpMode = usb_read8(Adapter, REG_BWOPMODE);
- regRRSR_RSC = usb_read8(Adapter, REG_RRSR+2);
+ reg_bw_opmode = usb_read8(adapt, REG_BWOPMODE);
+ reg_prsr_rsc = usb_read8(adapt, REG_RRSR+2);
- switch (pHalData->CurrentChannelBW) {
+ switch (hal_data->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
- regBwOpMode |= BW_OPMODE_20MHZ;
- /* 2007/02/07 Mark by Emily because we have not verify whether
this register works */
- usb_write8(Adapter, REG_BWOPMODE, regBwOpMode);
+ reg_bw_opmode |= BW_OPMODE_20MHZ;
+ usb_write8(adapt, REG_BWOPMODE, reg_bw_opmode);
break;
case HT_CHANNEL_WIDTH_40:
- regBwOpMode &= ~BW_OPMODE_20MHZ;
- /* 2007/02/07 Mark by Emily because we have not verify whether
this register works */
- usb_write8(Adapter, REG_BWOPMODE, regBwOpMode);
- regRRSR_RSC = (regRRSR_RSC&0x90) |
(pHalData->nCur40MhzPrimeSC<<5);
- usb_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
+ reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+ usb_write8(adapt, REG_BWOPMODE, reg_bw_opmode);
+ reg_prsr_rsc = (reg_prsr_rsc&0x90) |
+ (hal_data->nCur40MhzPrimeSC<<5);
+ usb_write8(adapt, REG_RRSR+2, reg_prsr_rsc);
break;
default:
break;
}
- /* 3 */
- /* 3 <2>Set PHY related register */
- /* 3 */
- switch (pHalData->CurrentChannelBW) {
- /* 20 MHz channel*/
+ /* Set PHY related register */
+ switch (hal_data->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
- phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x0);
- phy_set_bb_reg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0);
+ phy_set_bb_reg(adapt, rFPGA0_RFMOD, bRFMOD, 0x0);
+ phy_set_bb_reg(adapt, rFPGA1_RFMOD, bRFMOD, 0x0);
break;
- /* 40 MHz channel*/
case HT_CHANNEL_WIDTH_40:
- phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x1);
- phy_set_bb_reg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x1);
- /* Set Control channel to upper or lower. These settings are
required only for 40MHz */
- phy_set_bb_reg(Adapter, rCCK0_System, bCCKSideBand,
(pHalData->nCur40MhzPrimeSC>>1));
- phy_set_bb_reg(Adapter, rOFDM1_LSTF, 0xC00,
pHalData->nCur40MhzPrimeSC);
- phy_set_bb_reg(Adapter, 0x818, (BIT26 | BIT27),
- (pHalData->nCur40MhzPrimeSC ==
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
+ phy_set_bb_reg(adapt, rFPGA0_RFMOD, bRFMOD, 0x1);
+ phy_set_bb_reg(adapt, rFPGA1_RFMOD, bRFMOD, 0x1);
+ /* Set Control channel to upper or lower.
+ * These settings are required only for 40MHz
+ */
+ phy_set_bb_reg(adapt, rCCK0_System, bCCKSideBand,
+ (hal_data->nCur40MhzPrimeSC>>1));
+ phy_set_bb_reg(adapt, rOFDM1_LSTF, 0xC00,
+ hal_data->nCur40MhzPrimeSC);
+ phy_set_bb_reg(adapt, 0x818, (BIT26 | BIT27),
+ (hal_data->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER)
? 2 : 1);
break;
default:
break;
}
- /* Skip over setting of J-mode in BB register here. Default value is
"None J mode". Emily 20070315 */
- /* 3<3>Set RF related register */
- switch (pHalData->rf_chip) {
+ /* Set RF related register */
+ switch (hal_data->rf_chip) {
case RF_8225:
break;
case RF_8256:
- /* Please implement this function in Hal8190PciPhy8256.c */
break;
case RF_8258:
- /* Please implement this function in Hal8190PciPhy8258.c */
break;
case RF_PSEUDO_11N:
break;
case RF_6052:
- rtl8188e_PHY_RF6052SetBandwidth(Adapter,
pHalData->CurrentChannelBW);
+ rtl8188e_PHY_RF6052SetBandwidth(adapt,
hal_data->CurrentChannelBW);
break;
default:
break;
@@ -386,7 +362,7 @@ void PHY_SetBWMode8188E(struct adapter *Adapter, enum
ht_channel_width Bandwidth
pHalData->nCur40MhzPrimeSC = Offset;
if ((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved))
- _PHY_SetBWMode92C(Adapter);
+ phy_set_bw_mode_callback(Adapter);
else
pHalData->CurrentChannelBW = tmpBW;
}
--
1.7.10.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
