[dstar_digital] Re: D-STAR Field Day Update

2008-06-27 Thread txhemi57
Is there an acceptable range of frequencies for simplex?

[ED - Yes, don't use 146.52 (see the rules) and stay out of any repeater 
frequencies, satellite sub bands, cw/ssb segments ... other than that, have 
fun.  In many areas 145.67 mHz. is the D-STAR contact frequency, I'd start 
there.  In some areas there is little or no use of the bottom of 430 (91AD goes 
there, I would venture other D-STAR 70cm radios do as well.]


--- In dstar_digital@yahoogroups.com, Woodrick, Ed [EMAIL PROTECTED]
wrote:

 D-STAR Field Day Participants,

 With just over 24 hours before D-STAR Field Day begins, the
excitement is growing. Everyone is thinking about what they need to
pack. The generators have all had their oil changed and the games are
about to begin.

 A suggestion for reflector use. From what I've seen, the C modules
on the reflectors are where a number of repeaters are linked full
time. To keep from bothering these folks, why don't we try to stay
away from the C module. And we probably ought to stay off of the non-
North American Reflectors.

 Suggested Reflector Usage

 REF001A   Voice  Simultaneous Data
 REF001B   Data Only
 REF002A   Voice  Simultaneous Data
 REF002B   Data Only
 REF004A   Voice  Simultaneous Data
 REF004B   Data Only

 Simultaneous Data is those who are going for 3 point contacts,
where they can type and talk at the same time.

 If you've misplaced the D-STAR Field Day Rules or Update, you can
download them at www.DSTARINFO.comhttp://www.DSTARINFO.com, there's
even some sample logs.

 Don't forget that D-STAR Field Day goes the entire 27 hour period,
no matter when you start setup. Do some demonstrations before
everyone else starts!

 Ed WA4YIH


 p.s. I'll be W4GR 7A GA and will probably hang around either of the
REF002A or REF002B ports.

 Good Luck in the Contest!




 [Non-text portions of this message have been removed]





[dstar_digital] Re: Inside Chassis coax - lossy

2008-06-25 Thread txhemi57
I am wondering if anyone else has tried this? I sent this to the club
president and he liked the idea.

I am looking at a picture of the inside of the IC-RD200V. I can not
tell what type of connectors are on there, but you say that they are
Type-N. Would it be worth while to purchase a 6 or 10 foot cable with
Type-N on one end and a PL-259 on the other. I believe we have SO-239
on our waycom duplexers.

Thanks,

Lynn Gustafson KD5DZU