SV: [Dx4win] TS-2000
Today I stared up my new TS2000 and could not get DX4WIN (5.03) to = exchange data with the rig. DX4WIN has been operational with my ICOM = rigs for two years without problems. I expect the cause to be the = incorrect .rig file as described. I do not have any idea how to change = that and would very much appreciate it if someone could mail the the = correct file or the information. 73 de Erik/SM0JCA - Ursprungligt meddelande -=20 Fr=E5n: "Charley Scarborough" <[EMAIL PROTECTED]> Till: ; <[EMAIL PROTECTED]> Skickat: den 24 februari 2002 15:27 =C4mne: Re: [Dx4win] TS-2000 The .rig file originally published for the TS-2000 had 2 errors in it. Someone published the corrections a few months ago, which cleared most = of my problems. If you haven't already corrected your .rig file that's = probably your next step. I've attached the corrected file. Hope this helps. 73, AC7LU Charley - Original Message - From: "Dani - EA5FV" <[EMAIL PROTECTED]> To: "DX4WIN" Sent: Sunday, February 24, 2002 2:34 AM Subject: [Dx4win] TS-2000 > HI, > I have installed my KENWOOD TS-2000 with DX4WIN, > when I itch with the mouse a spot in 50,144,432 Mhz, > DX4WIN responds this "bad frequency for radio." > Some solution?? > Thank you. > > > Adi=F3s por ahora. > Dani, (EA5FV) > Correo-E: [EMAIL PROTECTED] > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Help Importing Old Logs
I am consolidating a bunch of old electronic contest logs for NK7U into DX4WIN. I have got all of them done but a handful and could use some thoughts and advice on these last few. They were all created in 1990 and 1991 and are of two types: * .SAV files. This appears to be a binary file of some sort. I have no idea what contesting software it might be from and/or if an existing DX4WIN filter will work. * .NAF files. This is an ASCII file and may be from the old WJ2O program. The WJ2O filter does not import it and the file is not of the "one record per line" type where I could easity create my own filter. If anyone has any ideas on what I can do with these two I sure would appreciate it. Scott/K7ZO
SV: [Dx4win] TS-2000
Erik, I believe that the default baudrate for the TS-2000 is incorrect. (should be= 9600) You can either overwrite the bad default in the radio selection= screen, or modify the rig file with NotePad.exe Paul At 05:10 PM 3/9/02 +, [EMAIL PROTECTED] wrote: >Today I stared up my new TS2000 and could not get DX4WIN (5.03) to exchange= data with the rig. DX4WIN has been operational with my ICOM rigs for two= years without problems. I expect the cause to be the incorrect .rig file as= described. I do not have any idea how to change that and would very much= appreciate it if someone could mail the the correct file or the= information. > >73 de Erik/SM0JCA > > > > >- Ursprungligt meddelande -=20 >Fr=E5n: "Charley Scarborough" <[EMAIL PROTECTED]> >Till: ; <[EMAIL PROTECTED]> >Skickat: den 24 februari 2002 15:27 >=C4mne: Re: [Dx4win] TS-2000 > > >The .rig file originally published for the TS-2000 had 2 errors in it. >Someone published the corrections a few months ago, which cleared most of= my >problems. If you haven't already corrected your .rig file that's probably >your next step. I've attached the corrected file. Hope this helps. > >73, AC7LU Charley > >- Original Message - >From: "Dani - EA5FV" <[EMAIL PROTECTED]> >To: "DX4WIN" >Sent: Sunday, February 24, 2002 2:34 AM >Subject: [Dx4win] TS-2000 > > >> HI, >> I have installed my KENWOOD TS-2000 with DX4WIN, >> when I itch with the mouse a spot in 50,144,432 Mhz, >> DX4WIN responds this "bad frequency for radio." >> Some solution?? >> Thank you. >> >> >> Adi=F3s por ahora. >> Dani, (EA5FV) >> Correo-E: [EMAIL PROTECTED] >> >> ___ >> Dx4win mailing list >> Dx4win@mailman.qth.net >> http://mailman.qth.net/mailman/listinfo/dx4win > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win=20 Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] Can I shut off the sidetone?
Gene, In the CW keyboard window, do a right mouse click, and select settings. (Btw, Side tone is an entry in the help index) Paul - At 09:34 AM 3/9/02 -0800, Gene Alan Williamson wrote: >There must be a way to shut off the CW sidetone, but I can't find it in the >Help files or list archives. Anyone? > >Also, as long as you're here: when I set a frequency on my IC-756, it >switches to the narrow CW filter. Can anyone help there? > >73 Gene N7YW > > > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] TS-2000
Erik The TS200 Kenwood 2000.rig file included in version 5.03 has 2 errors in it. I've attached the corrected file. Hope this helps. I couldn't get anything on my rig to work until I fixed this. Charley - Original Message - From: <[EMAIL PROTECTED]> To: Cc: "Charley Scarborough" <[EMAIL PROTECTED]> Sent: Saturday, March 09, 2002 10:10 AM Subject: SV: [Dx4win] TS-2000 Today I stared up my new TS2000 and could not get DX4WIN (5.03) to exchange data with the rig. DX4WIN has been operational with my ICOM rigs for two years without problems. I expect the cause to be the incorrect .rig file as described. I do not have any idea how to change that and would very much appreciate it if someone could mail the the correct file or the information. 73 de Erik/SM0JCA - Ursprungligt meddelande - Från: "Charley Scarborough" <[EMAIL PROTECTED]> Till: ; <[EMAIL PROTECTED]> Skickat: den 24 februari 2002 15:27 Ämne: Re: [Dx4win] TS-2000 The .rig file originally published for the TS-2000 had 2 errors in it. Someone published the corrections a few months ago, which cleared most of my problems. If you haven't already corrected your .rig file that's probably your next step. I've attached the corrected file. Hope this helps. 73, AC7LU Charley - Original Message - From: "Dani - EA5FV" <[EMAIL PROTECTED]> To: "DX4WIN" Sent: Sunday, February 24, 2002 2:34 AM Subject: [Dx4win] TS-2000 > HI, > I have installed my KENWOOD TS-2000 with DX4WIN, > when I itch with the mouse a spot in 50,144,432 Mhz, > DX4WIN responds this "bad frequency for radio." > Some solution?? > Thank you. > > > Adiós por ahora. > Dani, (EA5FV) > Correo-E: [EMAIL PROTECTED] > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- StripMime Report -- processed MIME parts --- multipart/mixed text/plain (text body -- kept) application/octet-stream ---
[Dx4win] IOTA update
Here is update for DX4WIN5.03 IOTA Island data. You need copy island data and save as text file ,for example,"IOTA.txt" Then add it to DX4WIN usual way:File|Databases|IOTA then File|Import IOTA Data|open "IOTA.txt" Then SAY "NO" (VERY IMPORTANT SAY - NO) then OK and SAVE&EXIT. You can use DX4win manual for update of course. COPY THIS PART*** AF091,"Jendouba/Bizerte/Tunis/Nabeul", 9.000,37.000 AS157,"South China Sea Coast Centre group", 11.000,108.000 AS158,"Liaoning Province East group",39.000,123.000 AS159,"Black Sea Coast West group",41.500,32.000 AS160,"Shandong Province North West group",37.500,119.000 AS161,"KERALA STATE group ",09.000,075.500 EU188,"Pechorskoye Sea Coast West group",51.290,68.270 NA221,"Veracruz State North Group",21.000,-97.000 SA089,"Falcon State group (Venezuela)",11.000,-69.500 SA090,"Anzoategui State / Sucre State West gr",10.300,-64.000 SA091,"Magallanes & Antartica Chile Province ",-53.300,-58.000 STOP COPY Thanks George, UY5XE for help with correction of IOTA data. Please comments to [EMAIL PROTECTED] -- Best regards, Vlad UA6JD my photo http://hamgallery.com/gallery/U/
[Dx4win] Can I shut off the sidetone?
There must be a way to shut off the CW sidetone, but I can't find it in the Help files or list archives. Anyone? Also, as long as you're here: when I set a frequency on my IC-756, it switches to the narrow CW filter. Can anyone help there? 73 Gene N7YW
[Dx4win] Filter Selection
Hei Bob ! Thanks for the tip, I will try that as soon I get home. 73, >= Original Message From "Bob Henderson" <[EMAIL PROTECTED]> = >Carlos > >I think I have the answer to you questions > >You need to set up the Group number for the part of your Master Log you want >new QSOs to go into. You do this with File|Preferences|QSO|Defaults > >Whatever filter you have selected the Other QSO window shows all previous >QSOs in you Master Log but the spots window operates based upon the current >filter settings. This is the way I think it should be. > >I think all we need is to be able to choose our default filter selection on >start up. > >What about it Steve/Paul? > >Bob 5B4AGN Carlos Ferreira LA9PJA - JW9PJA Drammen, Norway Tel.mob.: +47 98-46 80 27 www.la9pja.com [EMAIL PROTECTED]
