[Dx4win] xp cw drivers
Works fine here under XP... If you did an upgrade, I think you can re-install DX4WIN so that it installs the appropriate drivers... Or you can copy them manually... >From the Help file (did you read it?) == Port Driver The installation script installs a port access driver to support CW keying using a printer port and the generation of the CW side tone: for Win/95/98: Windows\System\Vichw11.vxd for Win/NT/2000/XP: WinNT\System32\Divers\Vichw11.sys The help file also tells you how to extract these files... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Webb Sent: February 22, 2003 9:50 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] xp cw drivers Help,upgraded from me to xp...no cw drivers...HELP,73 john ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] xp cw drivers
Help,upgraded from me to xp...no cw drivers...HELP,73 john
[Dx4win] Another DX spot window problem
Hi, I have another 6.02 version problem. In my log (contains over 16.000 QSO) I see I never worked SV/A on 160m. (No RTTY, NO CW, NO PHONE) The DX spot announce SY8A and 6.02 counts it for SY/A with priority 3. I make this PHONE QSO with SY8A and store it as SV/A (with ENTER). I found that SY8A is not a SV/A - Mt.Athos but SV - Greece. I overwrite the Prefix value of this QSO from the Prefix SV/A to Prefix SV and store it. The priority of SY8A in the DX spots window change from 3 to 5. But this is for sure wrong because SV (Greece) I have C - confirmed on CW and PHONE. After storing of another QSO (with IT9EQO) I see that the SY8A Priority in the DX spots window change now the priority 5 to priority 7 ! It must be a 6.02 problem I think, in the 5.03 was all OK. 73 Milan, OK1FM Milan GÜTTER http://www.ok1fm.com E-mail: [EMAIL PROTECTED]
[Dx4win] Using LPT1 with DX4WIN and Win2000
Does anyone have the LPT port working with DX4WIN v6.02 and Windows = 2000? I use Direct I/O = (http://www.direct-io.com/index.htm?http&&&www.direct-io.com/kb/q63.h= tm) to use the LPT port when using WriteLog for contesting (OS-Windows = 2000). It will appropriately switch between 2 radios using the Top Ten = Devices "DX Doubler" box and keys the appropriate radio when using CW. I have set up Direct I/O to use with DX4WIN v6.02 but have not been able = to get it to key CW or switch the DX Doubler box as it will with = WriteLog. I receive the following error messages: "Cannot find LPT1 for Radio 1/2 Switch" and "Cannot find LPT1 for Keying" Any help would be appreciated. 73, Jim Kauten, MD, W4TE James R. Kauten, MD, W4TE [EMAIL PROTECTED] [EMAIL PROTECTED] DXCC=20 ARRL Life Member AMSAT Life Member INDEXA Life Member Southeastern DX Club President (SEDXC) South East Contest Club Member (SECC) Buckhead Contest Club Life Member Northern California DX Foundation Member (NCDXF) This email was powered by MDaemon and scanned by AntiVirus Plug-in for = MDaemon. --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] Invalid QSO's and DX spots color/priority problem
Hello, in the 6.02 version I have a problem with the DX spots and their priority. >From the older DX4WIN versions I have in my log few QSO's which are set as "Invalid for DX" File "Valid DX" is set to "Invalid", or "rstR" set to "0" - invalid QSO This I use for called stations without reply, conditions watching, for not confirmed QSO's by DXpedition because NOT IN LOG, etc. I found, that the 6.02 DX spots window ignore this INVALID setting and counts this invalid QSO's as CONFIRMED. (DX spot window is set to DXCC colors) Any help or it is a 6.02 problem? 73 Milan, OK1FM Milan GÜTTER http://www.ok1fm.com E-mail: [EMAIL PROTECTED]
[Dx4win] Newbie Questions & Assistance Request!
Hello,
just wondering, at one moment when I played around with DX Spot Window and
reinstalled v 6.02, all of a sudden I couldn't see the last 10 or so QSOs
in the QSO window. This has never happened before and I am a DX4WIN addict
since version 1. I looked at the log window, no QSOs, I used CTRL+HOME and
CTRL+END, no QSOs. And so, all of a sudden, they were back. I don't know
what made them come back. Any ideas from the group? W98SE is used.
Erik
At 18:12 2003-02-21 -0600, you wrote:
>Hi
>
>de K9APW\\
>
>Using version 6.02 --
>
>New user as of this week --
>
>Entered MANUALLY ("off line") 800++ old entries -- but now find that only
>400 of them were actually 'saved' to the log file after exiting the system --
>
>Any idea where the other 400 entries not shown in the log book might have
>been saved to?? (I simply clicked on SAVE in the FILE menu??)
>
>How do I sort and view the logbook alphabetically by CALLSIGN??
>(All my cards are in alpha order but were not entered in that same order!!)
>
>Thanks for any help -- I have 5000++ manual entries to make and after spending
>all day today entering, I find that 400++ of those entries made apparently
>did not
>actually "save" -- they were appearing on the log on the screen as I
>entered them,
>but are not there after exiting and restarting the program???
>
>Thanks in advance --
>
>Dick, K9APW
>
>___
>Dx4win mailing list
>Dx4win@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win
Erik Hyllander, SM0LZT
e-mail: [EMAIL PROTECTED]
alt.: [EMAIL PROTECTED]
Packet: [EMAIL PROTECTED]
[Dx4win] Kenwood split frequency problem
Hello, just to make the picture more complete/complex (choose what you want :-)), I use TS440S and have no problem with split frequency using W98SE and DX4WIN v 6.02. 73 Erik At 13:49 2003-02-19 -0500, you wrote: >You wrote: > >Message: 3 >Date: Mon, 17 Feb 2003 16:10:31 -0800 (PST) >From: Tom LeClerc W1TJL <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: dx4win@mailman.qth.net >Cc: [EMAIL PROTECTED] >Subject: [Dx4win] Kenwood split frequency problem > >Hello Gentlemen, > >I noticed a problem with 6.02 tonight that has me puzzled. When double >clicking on a packet spot with a split the Kenwood TS-950SDX does not go >into >split mode. > >-- > >This has been reported in this forum as a 6.03 bug and appears to affect all >Kenwood transceivers. > >John, K2CIB > > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win Erik Hyllander, SM0LZT e-mail: [EMAIL PROTECTED] alt.: [EMAIL PROTECTED] Packet: [EMAIL PROTECTED]
[Dx4win] welcome to Dick K9APW
Just want to say "welcome" to the list to Dick Lust K9APW (All Points West), the helpful auctioneer=2E We bought a KLM 30 meter beam from him several years ago and got two hours of great stories along with it=2E Peg KB9LIE in SW Wisconsin mail2web - Check your email from the web at http://mail2web=2Ecom/ =2E
[Dx4win] Headed For Antarctica?
Are you headed to Antarctica? Know somebody who is? Here's a way you can help KC4AAA get on bands other than 20 meters. A thread on the [EMAIL PROTECTED] reflector addressed working KC4AAA on bands other than 20M. Antarctica on other bands would be a nice addition to a great many logs. Ford, N0FP suggested the SteppIR reflector members take up a collection to provide KC4AAA with a SteppIR antenna. Upon seeing this, John, WA7IR immediately offered to donate a 3 element plus 6M SteppIR to KC4AAA if the reflector members could find a way to get the antenna to Antarctica! So, we are looking for someone headed to Antarctica who will take the antenna, or who has a means of getting the antenna there please contact Ford, N0FP with a post to [EMAIL PROTECTED] Or contact me at [EMAIL PROTECTED] and I will forward. Thanks, Jerry K3BZ Also, please pass this message on to any other HF, antenna, or other amateur radio forums to which you may have access. Thanks and 73.
[Dx4win] Minor bug - Listen mode
When a station on the spot list is placed in Listen mode with control-L the radio indeed goes goes there but the spot window is placed in Holding mode. Larry Alkoff N2LA Larry Alkoff N2LA - Austin TX
