[Dx4win] QSL Printing Directly to Cards
I guess there is still something that I am not expressing or that does not work. I was told by one person to try print Labels | QSL Labels in Sequence: This equals 0 Paul suggested Labels Print QSL Labels | Print | Preview. This will show me what is there is 154 cards out of all of my QSOs. When I look at one specific card, I have 61 cards and only 1 is there. I have another that shows 1 and none print. So what ever is going on.. it is not right. At this point, I am getting real frustrated with DX4Win. TNX for any suggestions!! Will NA2NA - Original Message - From: "Paul van der Eijk" <[EMAIL PROTECTED]> To: "William Liporace - NA2NA" <[EMAIL PROTECTED]>; "DX4WIN POSTINGS" Sent: Thursday, April 10, 2003 10:54 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards > Will, > > When you do an EDIT | Preview, you get enough to see what is going on > using dummy data. > > When you PRINT, you can also select a preview, which will use all available > real data to show what will happen. > > Does that explain what you observe? > > Paul > > At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: > >Hi Folks, > >I have not done much QSLing in a long time. I am home for a few days and > >wanted to get caught back up. I have used the same QSL Cards and printer for > >a long time. I have the same paper definition for the QSL card. When I go > >into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one > >that has 61 QSOs listed, but it only prints one card. The one that has 1 > >does not print the card. I did not want to do my buro list (way too many, > >but I will print them this weekend..maybe) yet. > >When I go to Edit | Preview and print, the demo two cards work just fine. > >The menu on the Top says # of QSOs, but I do not seem to get all of the > >cards to show up in the print preview. > >What am I doing wrong?? > > > >TNX Will NA2NA > > > >___ > >Dx4win mailing list > >Dx4win@mailman.qth.net > >http://mailman.qth.net/mailman/listinfo/dx4win > > > Paul van der Eijk (KK4HD) > [EMAIL PROTECTED] > http://www.dx4win.com > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Can't Spot A QSX Freq On IC-756Pro2
Maybe generic to recent Icoms. My old IC-765 doesn't exhibit this behavior. K8AC - Original Message - From: "Jim Reisert AD1C" <[EMAIL PROTECTED]> To: "Toby and Ira Stoler" <[EMAIL PROTECTED]>; Sent: Friday, April 11, 2003 6:23 AM Subject: Re: [Dx4win] Can't Spot A QSX Freq On IC-756Pro2 > At 08:22 PM 4/10/2003 -0700, Ira Stoler K2RD wrote: > > >Anyone have any ideas? I cannot get the radio (IC756Pro2) to spot a qsx > >frequency when operating split. As you can see from the paste below, the > >program doesn't seem to be able to read the sub-vfo. If a spot has a qsx it > >loads both vfos and sets split properly, just not when I spot while split. > >QSX frequency is blank (0) and spot frequency is shown as which ever vfo is > >currently selected. By the way, problem appears the same with V5 or V6. > > This is a generic problem with ICOM radios. CT has had this problem for > years. There is NO software bit you can read inside the radio to determine > whether the SPLIT button is on or off. > > 73 - Jim AD1C > > > -- > Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 > USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com > PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
[Dx4win] QSL Printing Directly to Cards
But the card counts do not match!! In the Directs I have 61 cards according to the top count, when I preview or print I have only 6. Hell I have more than that stateside When I open Print QSLs and change nothing it shows me 2075 cards, when I do a Print | Preview it only gives me 154... Will - Original Message - From: "Paul van der Eijk" <[EMAIL PROTECTED]> To: "William Liporace - NA2NA" <[EMAIL PROTECTED]>; "DX4WIN POSTINGS" Sent: Thursday, April 10, 2003 10:54 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards > Will, > > When you do an EDIT | Preview, you get enough to see what is going on > using dummy data. > > When you PRINT, you can also select a preview, which will use all available > real data to show what will happen. > > Does that explain what you observe? > > Paul > > At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: > >Hi Folks, > >I have not done much QSLing in a long time. I am home for a few days and > >wanted to get caught back up. I have used the same QSL Cards and printer for > >a long time. I have the same paper definition for the QSL card. When I go > >into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one > >that has 61 QSOs listed, but it only prints one card. The one that has 1 > >does not print the card. I did not want to do my buro list (way too many, > >but I will print them this weekend..maybe) yet. > >When I go to Edit | Preview and print, the demo two cards work just fine. > >The menu on the Top says # of QSOs, but I do not seem to get all of the > >cards to show up in the print preview. > >What am I doing wrong?? > > > >TNX Will NA2NA > > > >___ > >Dx4win mailing list > >Dx4win@mailman.qth.net > >http://mailman.qth.net/mailman/listinfo/dx4win > > > Paul van der Eijk (KK4HD) > [EMAIL PROTECTED] > http://www.dx4win.com >
[Dx4win] Can't Spot A QSX Freq On IC-756Pro2
At 08:22 PM 4/10/2003 -0700, Ira Stoler K2RD wrote: >Anyone have any ideas? I cannot get the radio (IC756Pro2) to spot a qsx >frequency when operating split. As you can see from the paste below, the >program doesn't seem to be able to read the sub-vfo. If a spot has a qsx it >loads both vfos and sets split properly, just not when I spot while split. >QSX frequency is blank (0) and spot frequency is shown as which ever vfo is >currently selected. By the way, problem appears the same with V5 or V6. This is a generic problem with ICOM radios. CT has had this problem for years. There is NO software bit you can read inside the radio to determine whether the SPLIT button is on or off. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC