[Dx4win] V7 MMTTY Window Problem
I agree with Les, the disappearing RTTY control window is a nuisance. I created a small peep hole by moving and re-sizing varous open windows and park the RTTY control panel there. Most of it disappears behind the DX4WIN windows, but the peep hole allows me to see the Scope. Everything else seems to be working fine. 73, Jim, K0JUH - Original Message - From: Les Kalmus [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Wednesday, June 01, 2005 3:02 PM Subject: [Dx4win] V7 MMTTY Window Problem In V7, the MMTTY window opens OK along with the RTTY control window. However, the control window opens as a separate window outside of DX4WIN. It will not stay visible upon clicking in any other window including typing in the MMTTY window. It can be brought to the front by clicking on an exposed portion of it or on its icon in the windows task bar. Once visible, clicking inside the control window on almost any button causes it to hide behind other DX4WIN windows, although the key click is accepted. I would expect it to behave in the same manner as the other DX4WIN windows and stay put unless another window overlapping it received the focus. Is there a setup item to control this or is this a bug? 73, Les W2LK ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.4.0 - Release Date: 6/1/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.5.2 - Release Date: 6/3/2005
[Dx4win] RTTY function keys (7.01)
Hy everybody. After having set al the RTTY (MMTTY) macro I founded that something is wrong with the label of each macro. The orizontal available space (from left to right) is less than half of the screen and while you can change the width of each key you can't modify the overall length. It is something that should be happened many hears ago with the packet or cw window, just can't remember. It is happening just to me (Athlon 1GHz + 640RAM +win XP) or is a bug? After that I re-email my problem with the qso input window when I am connected with the cluster: I have no answer about that. Is it possible I am alone??? I'm running a TS2000X controlled by the ARCP software. (dx4win is not engaged to control the radio being the ARCP much more versatile than dx4win on this regard) The band and /or mode change any time I receive a spot via the cluster and it drive me creazy tring to run the contest or even searching and pounching on the band. Each time I must check that all is ok. Some time after having properly set the mode, tring to set the band, receiving a spot I must return to set again the band. Band an mode are stable only if I insert a callsign in the call field. Tibor, IK2SAI
[Dx4win] RTTY function keys (7.01)
Bandswitching problem when spots arrive === You're not alone having this problem Tibor, I reported this to Paul Last week and got confirmation that this will be fixed next 7.0x release 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tibor M. Blum - IK2SAI Sent: Friday, June 03, 2005 3:58 PM To: dx4win@mailman.qth.net Subject: [Dx4win] RTTY function keys (7.01) Hy everybody. After having set al the RTTY (MMTTY) macro I founded that something is wrong with the label of each macro. The orizontal available space (from left to right) is less than half of the screen and while you can change the width of each key you can't modify the overall length. It is something that should be happened many hears ago with the packet or cw window, just can't remember. It is happening just to me (Athlon 1GHz + 640RAM +win XP) or is a bug? After that I re-email my problem with the qso input window when I am connected with the cluster: I have no answer about that. Is it possible I am alone??? I'm running a TS2000X controlled by the ARCP software. (dx4win is not engaged to control the radio being the ARCP much more versatile than dx4win on this regard) The band and /or mode change any time I receive a spot via the cluster and it drive me creazy tring to run the contest or even searching and pounching on the band. Each time I must check that all is ok. Some time after having properly set the mode, tring to set the band, receiving a spot I must return to set again the band. Band an mode are stable only if I insert a callsign in the call field. Tibor, IK2SAI ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] BV7: Direct printing on QSL cards
I just did 6800 QSOs worth, directly on cards, 4 to a sheet, with DX4WIN 6.03; from an economic standpoint it is certainly worth the initial effort. 73, Pete N4ZR At 05:27 PM 6/3/2005, Radivoj KAR wrote: Hi Gerben, Thanks for the info. My label position is different and it takes too much cut-and-try to set it a the right place of the QSL card ! I have given up and will stick the labels :) ! Best 73, Radi F6GNZ -Original Message- From: Gerben A.Menting [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 03, 2005 7:43 PM To: [EMAIL PROTECTED] Cc: dx4win@mailman.qth.net Subject:RE: [Dx4win] BV7: Direct printing on QSL cards Radi/Rog, I'm printing directly from DX4WIN to my qsl cards using a Epson Stylus C84. My setting for the paper size is still on A4. Details of the 'Print QSL label' window are: Label width: 70 mm Label height: 32 mm Horz.pitch: 0.00 Vert.pitch: 0.00 Spacing left: 70 mm Spacing top: 132 mm Horz.shift: 0.00 Vert.shift: 0.00 Nr across: 1 Nr down: 1 Paper size: A4 Portrait: not selected Printer properties: Landscape Paper size: A4 I'm using qsl cards that have about one quarter of the surface reserved for printing the qso data (right top corner). Next I put the cards in portrait position in the printer with the 'printable area' in the left-top corner. Perhaps you can use the same approach for the settings in BV7. It works very fine here. Using alternative ink cartridges of just about 12.50 Euro. I bought this Epson printer just because they are cheap and work fine with alternative cartridges. Regards, Gerben - PG5M [EMAIL PROTECTED] www.dx.to -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Radivoj KAR Sent: Tuesday, May 03, 2005 18:25 To: 'Roger Borowski' Cc: DX4WIN Reflector (E-mail) Subject: RE: [Dx4win] BV7: Direct printing on QSL cards Hi Rog, I questioned the author of BV software: he suggested to use inkjet Epson printer which can be set for the required paper size :)! But, for printing several thousands of DX-ped QSL cards it is a bit slow and expensive solution! As sticking labels in such situation is also too time consuming, I guess the only solution is to chose the smallest standard paper size (like DL envelope), stick a QSL in the middle and on right side of the envelope, and measure margins as it was on the envelope one wish to print. This will allow using our fast and high-capacity ink cartridge Laserjet printer. This is the way I figured-out that may solve the issue. Have a try 73, Radi F6GNZ -Original Message- From: Roger Borowski [mailto:[EMAIL PROTECTED] Sent: Sunday, April 24, 2005 8:25 PM To: [EMAIL PROTECTED] Subject:Re: [Dx4win] BV7: Direct printing on QSL cards I'm also using a HP 4000, Radi. If you hear of any solutions, please share them with me. I have not found any but gave up rather easily. Thanks 73, Rog-K9RB [EMAIL PROTECTED] - Original Message - From: Radivoj KAR [EMAIL PROTECTED] To: DX4WIN Reflector (E-mail) dx4win@mailman.qth.net Sent: Sunday, April 24, 2005 1:36 PM Subject: [Dx4win] BV7: Direct printing on QSL cards Trying to print directly to reserved space on 140x90 cm QSL cards using DF3CB BV7 software. My HP Laserjet 4000 printer doesn't support this paper size so using any other standard format changes all my prepared label position and margin parameters. Has anybody solved this problem and how? 73, Radi F6GNZ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] BV7: Direct printing on QSL cards
Hello Pete, Can you publish your VADE-MECUM on this subject. Sure a lot of people would appreciate. See you later Alligator Jos on4kj -Message d'origine- De?: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Pete Smith Envoy??: vendredi 3 juin 2005 22:47 ??: [EMAIL PROTECTED]; 'Gerben A.Menting'; [EMAIL PROTECTED] Cc?: dx4win@mailman.qth.net Objet?: RE: [Dx4win] BV7: Direct printing on QSL cards I just did 6800 QSOs worth, directly on cards, 4 to a sheet, with DX4WIN 6.03; from an economic standpoint it is certainly worth the initial effort. 73, Pete N4ZR At 05:27 PM 6/3/2005, Radivoj KAR wrote: Hi Gerben, Thanks for the info. My label position is different and it takes too much cut-and-try to set it a the right place of the QSL card ! I have given up and will stick the labels :) ! Best 73, Radi F6GNZ -Original Message- From: Gerben A.Menting [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 03, 2005 7:43 PM To: [EMAIL PROTECTED] Cc: dx4win@mailman.qth.net Subject:RE: [Dx4win] BV7: Direct printing on QSL cards Radi/Rog, I'm printing directly from DX4WIN to my qsl cards using a Epson Stylus C84. My setting for the paper size is still on A4. Details of the 'Print QSL label' window are: Label width: 70 mm Label height: 32 mm Horz.pitch: 0.00 Vert.pitch: 0.00 Spacing left: 70 mm Spacing top: 132 mm Horz.shift: 0.00 Vert.shift: 0.00 Nr across: 1 Nr down: 1 Paper size: A4 Portrait: not selected Printer properties: Landscape Paper size: A4 I'm using qsl cards that have about one quarter of the surface reserved for printing the qso data (right top corner). Next I put the cards in portrait position in the printer with the 'printable area' in the left-top corner. Perhaps you can use the same approach for the settings in BV7. It works very fine here. Using alternative ink cartridges of just about 12.50 Euro. I bought this Epson printer just because they are cheap and work fine with alternative cartridges. Regards, Gerben - PG5M [EMAIL PROTECTED] www.dx.to -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Radivoj KAR Sent: Tuesday, May 03, 2005 18:25 To: 'Roger Borowski' Cc: DX4WIN Reflector (E-mail) Subject: RE: [Dx4win] BV7: Direct printing on QSL cards Hi Rog, I questioned the author of BV software: he suggested to use inkjet Epson printer which can be set for the required paper size :)! But, for printing several thousands of DX-ped QSL cards it is a bit slow and expensive solution! As sticking labels in such situation is also too time consuming, I guess the only solution is to chose the smallest standard paper size (like DL envelope), stick a QSL in the middle and on right side of the envelope, and measure margins as it was on the envelope one wish to print. This will allow using our fast and high-capacity ink cartridge Laserjet printer. This is the way I figured-out that may solve the issue. Have a try 73, Radi F6GNZ -Original Message- From: Roger Borowski [mailto:[EMAIL PROTECTED] Sent: Sunday, April 24, 2005 8:25 PM To: [EMAIL PROTECTED] Subject:Re: [Dx4win] BV7: Direct printing on QSL cards I'm also using a HP 4000, Radi. If you hear of any solutions, please share them with me. I have not found any but gave up rather easily. Thanks 73, Rog-K9RB [EMAIL PROTECTED] - Original Message - From: Radivoj KAR [EMAIL PROTECTED] To: DX4WIN Reflector (E-mail) dx4win@mailman.qth.net Sent: Sunday, April 24, 2005 1:36 PM Subject: [Dx4win] BV7: Direct printing on QSL cards Trying to print directly to reserved space on 140x90 cm QSL cards using DF3CB BV7 software. My HP Laserjet 4000 printer doesn't support this paper size so using any other standard format changes all my prepared label position and margin parameters. Has anybody solved this problem and how? 73, Radi F6GNZ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win