[Dx4win] CQ DX Field Submittal
I expanded the QSO window using F5. I have grid AH confirmed QSO's for SSB, Digital, and 10M. I next made sure there were no award flags for any grid AH QSO - used F8 to sort this. I put S in the mode box for 5W0TR, a 15m ssb contact. I put S in the band box for K8T, a 10M SSB contact. I put S in the mode box for 5W0DP, a 17M RTTY contact. I confirmed that no other qso with a grid of AH had any set flags in the CQ DX Field submissions box. I deselected in the Award box the checkmarks for both Band and Mode but left the checkmark next to Mixed so that I would print out only a Mixed submission. I next printed the mixed submittal and darn it but there were three duplicate entries for grid AH Mixed. All three of the above QSO's, where I put an S, showed up counting for Grid AH Mixed. Only one should have shown up in this Mixed Award printout. Note that none of the three had an S flag in the Mixed column. I next wanted to see what would appear in the SSB mode printout. I selected only Mode in the Award box. I selected PHO in the Modes box and All Bands in the Bands box. The Phone printout had two entries for GRID AH. They were the two SSB contacts above having an S in the award flag for mode. One was intended for SSB mode and the other intended to count for 10M. I've done these submittals many times in the past with earlier versions of DX4WIN. This one is not working correctly. Or, I'm not doing something correctly for this version. I cannot go any further with this Submission until I know how to use it properly. It works perfectly if I don't try to select specific Grid QSO's. But I need to do that because some QSO's that DX4WIN selected are near the boundaries of two Grids and the QSL doesn't give a LAT or LON or Grid location. I have alternate QSL's that are clearly within the boundaries of a grid or so state that on the QSL card. But DX4WIN won't let me make any changes and still print out properly without having more than one entry per mode or band. I tried to give my exact procedure above and in my prior email. What am I doing wrong? Thanks for your patience and help! 73, Bud W3LL w...@arrl.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] LOGPlus! conversion
LOGPlus! logbooks are in Dbase-III format. Steve K6UM pointed out that these files can be read into Excel. I tried and sure enough, Excel 2003 can read the logbook! It can only handle 65K QSOs (lines) at a time, however, so you need some way to split the log if it's too big. You can at least save the log in some other ASCII format (like .CSV), then there might be an easier path to import into DX4WIN. From what I recall, there are at least two different formats of the .DBF file from LOGPlus! 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win
I meant this url: http://dx4win.ad1c.us/ Sorry! On Fri, Oct 30, 2009 at 5:17 PM, Jim Reisert AD1C wrote: > Go to http://www.dx4win.ad1c > > Find the Application Note, "Working with LoTW" > > The instructions are slightly different for 8.0x, you export to LoTW > and import from LoTW via the LoTW menu in the QSO window. > > 73 - Jim AD1C > > On Fri, Oct 30, 2009 at 2:50 PM, wrote: >> Hi , >> Trying to do another upload to lotw with no luck. >> >> I have uploaded previously and now want to do again without including >> previously upladed qsos. >> I am getting a popup say warning setting upload field and no qso filter >> active. do you want to procede, yes or no I hit yes >> >> then it tells me no qso changed >> >> I have the upload flag set to Y in the box, >> >> what am I doing wrong? >> >> 73 tnx, >> Steve W1DXH -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win
Go to http://www.dx4win.ad1c Find the Application Note, "Working with LoTW" The instructions are slightly different for 8.0x, you export to LoTW and import from LoTW via the LoTW menu in the QSO window. 73 - Jim AD1C On Fri, Oct 30, 2009 at 2:50 PM, wrote: > Hi , > Trying to do another upload to lotw with no luck. > > I have uploaded previously and now want to do again without including > previously upladed qsos. > I am getting a popup say warning setting upload field and no qso filter > active. do you want to procede, yes or no I hit yes > > then it tells me no qso changed > > I have the upload flag set to Y in the box, > > what am I doing wrong? > > 73 tnx, > Steve W1DXH -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win
I am not sure but if there is an upload date these qsos are not affected to upload agn. So choose the qsos you want, go to LotW, clear upload dates and after that set upload flags 73 Kostas SV1DPI - Original Message - From: "Jim Reisert AD1C" To: "DX4WIN Reflector" Cc: Sent: Friday, October 30, 2009 10:53 PM Subject: Re: [Dx4win] dx4win > Forwarded to DX4WIN reflector. > > On Fri, Oct 30, 2009 at 2:50 PM, wrote: >> Hi , >> Trying to do another upload to lotw with no luck. >> >> I have uploaded previously and now want to do again without including >> previously upladed qsos. >> I am getting a popup say warning setting upload field and no qso filter >> active. do you want to procede, yes or no I hit yes >> >> then it tells me no qso changed >> >> I have the upload flag set to Y in the box, >> >> what am I doing wrong? >> >> 73 tnx, >> Steve W1DXH > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win
It sounds like the flag is already set? Also, if you want to re-upload you also have to clear the LotW upload date. Jim Reisert AD1C wrote: > Forwarded to DX4WIN reflector. > > On Fri, Oct 30, 2009 at 2:50 PM, wrote: >> Hi , >> Trying to do another upload to lotw with no luck. >> >> I have uploaded previously and now want to do again without including >> previously upladed qsos. >> I am getting a popup say warning setting upload field and no qso filter >> active. do you want to procede, yes or no I hit yes >> >> then it tells me no qso changed >> >> I have the upload flag set to Y in the box, >> >> what am I doing wrong? >> >> 73 tnx, >> Steve W1DXH > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Country windows
In qso window under window>Country This way you will have the country window on. Now if you want only rtty and psk qsos are included under digital, go to File>awards>dxcc and choose like Valid modes only ssb, cw, rtty, psk 73 Kostas sv1dpi - Original Message - From: "ik1MDF" To: Sent: Friday, October 30, 2009 7:37 PM Subject: [Dx4win] Country windows > hello, > I need to have on COUNTRY WINDOWS: > PHONE together with DIGITAL (RTTY, PSK31) in order to check my digital > status. > > How can i do it? On release 7 I found it ... on 8,xx not ... > > > thanks 73 ik1mdf > > - Original Message - > From: > To: > Sent: Friday, October 30, 2009 5:00 PM > Subject: Dx4win Digest, Vol 66, Issue 33 > > >> Send Dx4win mailing list submissions to >> dx4win@mailman.qth.net >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://mailman.qth.net/mailman/listinfo/dx4win >> or, via email, send a message with subject or body 'help' to >> dx4win-requ...@mailman.qth.net >> >> You can reach the person managing the list at >> dx4win-ow...@mailman.qth.net >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Dx4win digest..." >> >> >> Today's Topics: >> >> 1. Priority/Colours in Spotting Window (David Gould) >> 2. Re: Priority/Colours in Spotting Window (Jim Reisert AD1C) >> 3. Re: Printing group names (Jim Reisert AD1C) >> 4. Re: Printing group names (Kostas Stamatis) >> 5. Re: Filtered Log (Jerry Plemmons) >> >> >> -- >> >> Message: 1 >> Date: Thu, 29 Oct 2009 17:32:59 + >> From: David Gould >> Subject: [Dx4win] Priority/Colours in Spotting Window >> To: dx4win@mailman.qth.net >> Message-ID: >> <20091029173300.fqn2093.aamtaout03-winn.ispmail.ntl@g3ueg.g3ueg.co.uk> >> >> Content-Type: text/plain; charset="us-ascii"; format=flowed >> >> This seems like a very basic question to which I should be able to >> work out the answer, but having read the help several times and >> investigated several callsigns I can't work out the logic. >> >> I understand Priority 1 (New country) >> I understand the unconfirmed variations of the other priorities.. >> >> The award is set up for DXCC >> The **only** mode specified is SSB >> >> Could someone please explain the difference between.. >> priority 3 - new award band. >> and priority 6 new band mode. >> >> I am missing F on 10m and a spot shows RED (Priority 3) >> I am missing ON on 15m and a spot shows GREEN (priority 6) >> >> I must be missing something!! >> >> 73, >> Dave, G3UEG >> >> >> >> -- >> >> Message: 2 >> Date: Thu, 29 Oct 2009 11:49:58 -0600 >> From: Jim Reisert AD1C >> Subject: Re: [Dx4win] Priority/Colours in Spotting Window >> To: David Gould >> Cc: dx4win@mailman.qth.net >> Message-ID: >> <806a89db0910291049xde721dew97ed4132e4a5d...@mail.gmail.com> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> On Thu, Oct 29, 2009 at 11:32 AM, David Gould wrote: >> >>> This seems like a very basic question to which I should be able to >>> work out the answer, but having read the help several times and >>> investigated several callsigns I can't work out the logic. >>> >>> I understand Priority 1 (New country) >>> I understand the unconfirmed variations of the other priorities.. >>> >>> The award is set up for DXCC >>> The **only** mode specified is SSB >>> >>> Could someone please explain the difference between.. >>> priority 3 - new award band. >>> and priority 6 new band mode. >>> >>> I am missing F on 10m and a spot shows RED (Priority 3) >>> I am missing ON on 15m and a spot shows GREEN (priority 6) >> >> Green means never worked on this particular band/mode combination >> (i.e. 15 Phone). You must have ON confirmed on 15m CW or RTTY, but >> never worked on 15m phone. >> >> 73- Jim AD1C >> >> -- >> Jim Reisert AD1C, , http://www.ad1c.us >> >> >> -- >> >> Message: 3 >> Date: Thu, 29 Oct 2009 11:51:43 -0600 >> From: Jim Reisert AD1C >> Subject: Re: [Dx4win] Printing group names >> To: "Gerben A.Menting - PG5M" >> Cc: dx4win@mailman.qth.net >> Message-ID: >> <806a89db0910291051g62435470pe41b62220c891...@mail.gmail.com> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> On Thu, Oct 29, 2009 at 12:06 AM, Gerben A.Menting - PG5M >> wrote: >> >>> Have recently upgraded to 8.02 and now need to print labels in this >>> version >>> for the first time. Problem is that I have checked to print group names >>> but >>> they don't appear on the labels. Any idea how I can solve this? I have >>> checked 1900 QSO of different DXCC entities (3D2, T30 and T2) and need >>> to >>> print group names for further processing. >> >> In the program help, look for this section: >> >>Preferences | Labels >> >> 73 - Jim AD1C >> >> -- >> Jim Reisert AD1C, , http://www.ad1c.us >> >> >> -- >> >> Message: 4 >> Date: Thu, 29 Oct 2009 21:24:34 +0200 >> Fro
Re: [Dx4win] CQ DX Field Submittal
You must put an S only in Mixed mode If you check once the mode and in the other qso the mixed both qsos are submitted Kostas sv1dpi - Original Message - From: "Bud Governale, W3LL" To: Sent: Friday, October 30, 2009 9:31 PM Subject: [Dx4win] CQ DX Field Submittal > I'm getting ready to do a CQ DX Field Submission using V8.02 > Since there are separate awards for Mixed, Phone, Digital and certain > selected bands, I put a check mark in Mixed, Band > and Mode in the CQ Field Award choices. > > The Submission printouts for Mixed, Phone, Digital, 10M, 40M and 80M are > all ok with one entry for each grid. > > However, I now want to choose specific QSL's to make the submission > easier. > If countries located within a single grid field are selected (identified > in the application literature) and they are > confirmed by a national organization (such as LOTW) then a submitted QSL > is not required. > > Here's an example of my problem: > > Grid AG is only confirmed by two QSO's with ZL8R. One for 40M SSB and one > for 15M RTTY. > > In the ZL8R 40M SSB QSO window, in the CQFld column, I put an S > (submitted) in the Mode column (for SSB) and one S in > the Band column (for 40M). > > In the ZL8R 15M RTTY QSO window, in the CQFld column, I put an S in the > Mixed column ( RTTY now adds a Mixed mode to the > previous SSB QSO) and one in the Mode column (for RTTY). > > Problem: Now when I print out the mixed submission listing (selecting > award CQ DX Field, Checking only Mixed award, > Selecting All Bands and All Modes) the printout has two entries for Grid > AG. One for SSB and one for RTTY QSO's. Only > one entry should be listed for each of the Grids for the mixed mode > submission. In this case only the RTTY QSO should > have been listed since it was the only one selected (S) for Mixed Mode. > > The above is just one example. I've done this for other grids that have > the similar QSO combinations. Now my Mixed > submission printout has many duplicate grid confirmations in it. > > How am I supposed to accomplish this? > > 73, > > Bud W3LL > w...@arrl.net > > > > > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win
Forwarded to DX4WIN reflector. On Fri, Oct 30, 2009 at 2:50 PM, wrote: > Hi , > Trying to do another upload to lotw with no luck. > > I have uploaded previously and now want to do again without including > previously upladed qsos. > I am getting a popup say warning setting upload field and no qso filter > active. do you want to procede, yes or no I hit yes > > then it tells me no qso changed > > I have the upload flag set to Y in the box, > > what am I doing wrong? > > 73 tnx, > Steve W1DXH __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CQ DX Field Submittal
Hi Bud, If you want to pick specific QSLs, expand the QSO window using the F5 key until you see the award flags at the bottom. You must "unsubmit" the QSO you do not want to submit and "submit" the QSO you do want to submit. Change the award flags(s) to "--" and "S", respectively (make sure to pay attention to mixed/band/mode award flags, change all the are necessary). When you are done, re-run the submission report. This is just like every other award. 73 - JIm AD1C On Fri, Oct 30, 2009 at 1:31 PM, Bud Governale, W3LL wrote: > I'm getting ready to do a CQ DX Field Submission using V8.02 > Since there are separate awards for Mixed, Phone, Digital and certain > selected bands, I put a check mark in Mixed, Band > and Mode in the CQ Field Award choices. > > The Submission printouts for Mixed, Phone, Digital, 10M, 40M and 80M are all > ok with one entry for each grid. > > However, I now want to choose specific QSL's to make the submission easier. > If countries located within a single grid field are selected (identified in > the application literature) and they are > confirmed by a national organization (such as LOTW) then a submitted QSL is > not required. > > Here's an example of my problem: > > Grid AG is only confirmed by two QSO's with ZL8R. One for 40M SSB and one for > 15M RTTY. > > In the ZL8R 40M SSB QSO window, in the CQFld column, I put an S (submitted) > in the Mode column (for SSB) and one S in > the Band column (for 40M). > > In the ZL8R 15M RTTY QSO window, in the CQFld column, I put an S in the Mixed > column ( RTTY now adds a Mixed mode to the > previous SSB QSO) and one in the Mode column (for RTTY). > > Problem: Now when I print out the mixed submission listing (selecting award > CQ DX Field, Checking only Mixed award, > Selecting All Bands and All Modes) the printout has two entries for Grid AG. > One for SSB and one for RTTY QSO's. Only > one entry should be listed for each of the Grids for the mixed mode > submission. In this case only the RTTY QSO should > have been listed since it was the only one selected (S) for Mixed Mode. > > The above is just one example. I've done this for other grids that have the > similar QSO combinations. Now my Mixed > submission printout has many duplicate grid confirmations in it. > > How am I supposed to accomplish this? -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] CQ DX Field Submittal
I'm getting ready to do a CQ DX Field Submission using V8.02 Since there are separate awards for Mixed, Phone, Digital and certain selected bands, I put a check mark in Mixed, Band and Mode in the CQ Field Award choices. The Submission printouts for Mixed, Phone, Digital, 10M, 40M and 80M are all ok with one entry for each grid. However, I now want to choose specific QSL's to make the submission easier. If countries located within a single grid field are selected (identified in the application literature) and they are confirmed by a national organization (such as LOTW) then a submitted QSL is not required. Here's an example of my problem: Grid AG is only confirmed by two QSO's with ZL8R. One for 40M SSB and one for 15M RTTY. In the ZL8R 40M SSB QSO window, in the CQFld column, I put an S (submitted) in the Mode column (for SSB) and one S in the Band column (for 40M). In the ZL8R 15M RTTY QSO window, in the CQFld column, I put an S in the Mixed column ( RTTY now adds a Mixed mode to the previous SSB QSO) and one in the Mode column (for RTTY). Problem: Now when I print out the mixed submission listing (selecting award CQ DX Field, Checking only Mixed award, Selecting All Bands and All Modes) the printout has two entries for Grid AG. One for SSB and one for RTTY QSO's. Only one entry should be listed for each of the Grids for the mixed mode submission. In this case only the RTTY QSO should have been listed since it was the only one selected (S) for Mixed Mode. The above is just one example. I've done this for other grids that have the similar QSO combinations. Now my Mixed submission printout has many duplicate grid confirmations in it. How am I supposed to accomplish this? 73, Bud W3LL w...@arrl.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filtered Log
On Fri, Oct 30, 2009 at 8:51 AM, Jerry Plemmons wrote: > BTW, what is a file with the extension " ~xl " and how can I recover it? > Also, when I click on "Backup" from the drop down menu, where is that back > up file saved and what name is it given? Jerry go to: http://dx4win.ad1c.us/ Find the application note called "Data Protection Strategies". 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Country windows
hello, I need to have on COUNTRY WINDOWS: PHONE together with DIGITAL (RTTY, PSK31) in order to check my digital status. How can i do it? On release 7 I found it ... on 8,xx not ... thanks 73 ik1mdf - Original Message - From: To: Sent: Friday, October 30, 2009 5:00 PM Subject: Dx4win Digest, Vol 66, Issue 33 > Send Dx4win mailing list submissions to > dx4win@mailman.qth.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://mailman.qth.net/mailman/listinfo/dx4win > or, via email, send a message with subject or body 'help' to > dx4win-requ...@mailman.qth.net > > You can reach the person managing the list at > dx4win-ow...@mailman.qth.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Dx4win digest..." > > > Today's Topics: > > 1. Priority/Colours in Spotting Window (David Gould) > 2. Re: Priority/Colours in Spotting Window (Jim Reisert AD1C) > 3. Re: Printing group names (Jim Reisert AD1C) > 4. Re: Printing group names (Kostas Stamatis) > 5. Re: Filtered Log (Jerry Plemmons) > > > -- > > Message: 1 > Date: Thu, 29 Oct 2009 17:32:59 + > From: David Gould > Subject: [Dx4win] Priority/Colours in Spotting Window > To: dx4win@mailman.qth.net > Message-ID: > <20091029173300.fqn2093.aamtaout03-winn.ispmail.ntl@g3ueg.g3ueg.co.uk> > > Content-Type: text/plain; charset="us-ascii"; format=flowed > > This seems like a very basic question to which I should be able to > work out the answer, but having read the help several times and > investigated several callsigns I can't work out the logic. > > I understand Priority 1 (New country) > I understand the unconfirmed variations of the other priorities.. > > The award is set up for DXCC > The **only** mode specified is SSB > > Could someone please explain the difference between.. > priority 3 - new award band. > and priority 6 new band mode. > > I am missing F on 10m and a spot shows RED (Priority 3) > I am missing ON on 15m and a spot shows GREEN (priority 6) > > I must be missing something!! > > 73, > Dave, G3UEG > > > > -- > > Message: 2 > Date: Thu, 29 Oct 2009 11:49:58 -0600 > From: Jim Reisert AD1C > Subject: Re: [Dx4win] Priority/Colours in Spotting Window > To: David Gould > Cc: dx4win@mailman.qth.net > Message-ID: > <806a89db0910291049xde721dew97ed4132e4a5d...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On Thu, Oct 29, 2009 at 11:32 AM, David Gould wrote: > >> This seems like a very basic question to which I should be able to >> work out the answer, but having read the help several times and >> investigated several callsigns I can't work out the logic. >> >> I understand Priority 1 (New country) >> I understand the unconfirmed variations of the other priorities.. >> >> The award is set up for DXCC >> The **only** mode specified is SSB >> >> Could someone please explain the difference between.. >> priority 3 - new award band. >> and priority 6 new band mode. >> >> I am missing F on 10m and a spot shows RED (Priority 3) >> I am missing ON on 15m and a spot shows GREEN (priority 6) > > Green means never worked on this particular band/mode combination > (i.e. 15 Phone). You must have ON confirmed on 15m CW or RTTY, but > never worked on 15m phone. > > 73- Jim AD1C > > -- > Jim Reisert AD1C, , http://www.ad1c.us > > > -- > > Message: 3 > Date: Thu, 29 Oct 2009 11:51:43 -0600 > From: Jim Reisert AD1C > Subject: Re: [Dx4win] Printing group names > To: "Gerben A.Menting - PG5M" > Cc: dx4win@mailman.qth.net > Message-ID: > <806a89db0910291051g62435470pe41b62220c891...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On Thu, Oct 29, 2009 at 12:06 AM, Gerben A.Menting - PG5M > wrote: > >> Have recently upgraded to 8.02 and now need to print labels in this >> version >> for the first time. Problem is that I have checked to print group names >> but >> they don't appear on the labels. Any idea how I can solve this? I have >> checked 1900 QSO of different DXCC entities (3D2, T30 and T2) and need to >> print group names for further processing. > > In the program help, look for this section: > >Preferences | Labels > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, , http://www.ad1c.us > > > -- > > Message: 4 > Date: Thu, 29 Oct 2009 21:24:34 +0200 > From: "Kostas Stamatis" > Subject: Re: [Dx4win] Printing group names > To: "REFLECTOR dx4win" > Message-ID: <0acd4d8d387c4e24905de61f1db0c...@sv1dpimain> > Content-Type: text/plain; format=flowed; charset="ISO-8859-1"; > reply-type=original > > Yoy must put %% in file>preferences>Rep/labels (the last choice) > When you go to Qso window>QSLs>Print qsl labels don't forget to check the > "print the group names" > I usually forget it (hi hi) so i suppose this is your mistake. > > Kostas sv1dpi > > - Original Message - > From:
Re: [Dx4win] Filtered Log
Mel and Tom: Thanks for the prompt responses. I did something wrong in trying to print a range of dates (the CQWWDX2009SSB contest) QSOs. I used the filter command to separate them out, then printed. But I didn't use F9 to cancel the filter, although using the drop down I did cancel the filter there. Lo and behold, the contest QSOs had disappeared, not to be found again. I tried your suggestions, but couldn't find it. So I just gritted my teeth and re-entered the 240 contacts (from the printed pages). Some day I'll play with it again to see what I did wrong, but this time with a "practice" QSO file. BTW, what is a file with the extension" ~xl " and how can I recover it? Also, when I click on "Backup" from the drop down menu, where is that back up file saved and what name is it given? Jerry, K6JRY Wickford, Rhode Island - Original Message - From: "Mel" To: "Jerry Plemmons" Cc: "DX4WIN" Sent: Wednesday, October 28, 2009 9:21 AM Subject: Re: [Dx4win] Filtered Log > There is no way that printing your log has any bearing on the data loss. > > What is your "master log"? Are you keeping more than one? Were the QSOs > logged in the "master log" or another DX4Win log... or perhaps a different > logging program? > > Mel... > > Jerry Plemmons wrote: >> Hi guys and gals: >> >> I worked the CQWWDX contest this past week-end using DX4WIN 8.02, as >> usual. I wanted to print out the log for the two days so used the Filter >> function, asking for the entries logged 10/24 and 10/25. All printed >> just fine. The heading on the print out is: >> >> "LogBook sorted by Date (Filter Active) October 27, 2009" >> >> However. >> >> Now the QSOs logged are no where to be found in my master log. What did >> I do wrong? >> >> Jerry, K6JRY >> __ >> Dx4win mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dx4win@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
