[Dx4win] Problem with Filter selection
Jim It is a WinXP installation just like the one on which it ran fine. I have been unable to find any difference, apart from the greyed out menu items. Very frustrating. 73 Bob, 5B4AGN Late note... I have just reloaded DX4W and the items are now available. Much thanks for your help guys. On 3 December 2010 18:41, Jim Reisert AD1C wrote: > It sounds like you installed DX4WIN under C:\Program Files on a Vista > or Win7 operating system. You're running into Windows file protection > problems. > > Install it as C:\DX4W### instead. There is some information at > www.dx4win.com with installation tips for Vista/Win7 > > 73 - Jim AD1C > > On Fri, Dec 3, 2010 at 11:31 AM, Bob Henderson wrote: > > Hi Jim > > > > I have Expert mode enabled. I have also tried merging DX4WIN.ini from > the > > other computer but the items remain greyed out. Any other thoughts? > > > > Many thanks for helping. > > > > Bob, 5B4AGN > > > > On 3 December 2010 18:07, Jim Reisert AD1C > wrote: > >> > >> In your prefs, change to Export mode. > >> > >> You should have exported your prefs from the old computer to a .INI > >> file, then imported that .INI file on the new computer. > >> > >> - Jim > >> > >> On Fri, Dec 3, 2010 at 10:55 AM, Bob Henderson wrote: > >> > Hi guys > >> > > >> > I have needed to install DX4WIN on a different computer to the one I > >> > mostly > >> > use. The installation was successful but I find Files, Selection & > >> > Files, > >> > Edit Group Names to be both greyed out. No doubt there is some kind > of > >> > switch to enable these functions but despite a search I have failed to > >> > find > >> > it. The facility worked fine on my other computer. Reading the > >> > electronic > >> > manual hasn't so far led to a solution. As I have used multiple calls > >> > in > >> > one compound log, I need to filter on group names to make sense of > >> > cluster > >> > input. > >> > > >> > I would really appreciate some help in getting to the bottom of this. > >> > > >> > Many thanks. > >> > > >> > Bob, 5B4AGN > >> > __ > >> > Dx4win mailing list > >> > Home: http://mailman.qth.net/mailman/listinfo/dx4win > >> > Help: http://mailman.qth.net/mmfaq.htm > >> > Post: mailto:Dx4win@mailman.qth.net > >> > > >> > This list hosted by: http://www.qsl.net > >> > Please help support this email list: http://www.qsl.net/donate.html > >> > > >> > >> > >> > >> -- > >> Jim Reisert AD1C, , http://www.ad1c.us > >> > > > > > > > > -- > Jim Reisert AD1C, , http://www.ad1c.us > > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Printing QSL
The mode is the last parameter in pronting report. So probably you have large fonts and this is outside the label. Try use smaller fonts. If you double click where the fonts name is written, you can change them 73 kostas sv1dpi - Original Message - From: "ROBERT GARCEAU" To: Sent: Friday, December 03, 2010 11:12 PM Subject: [Dx4win] Printing QSL > How do you get the mode onto the QSL label? > > I print date, UTC Band and RST but no mode. > > Bob, W1EQ > > Using DYMO label machine > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Grid field problem
Turned out to be a corrupted QSO in the log, dxl file. Probably happened when I merged 2 DX4WIN files. Thanks for the help from Jim AD1C 73 N8DX Jack __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXSpots (Color)
On Fri, Dec 3, 2010 at 4:24 PM, Hugh Phillips - K7XM wrote: > > > I'm running ver 8.04 with Win XP. A problem has cropped up with the DX spots. > > All of my DX SPOTS are grayed out in the spot window, (NON ARE COLORED). > > In the preference selections > > Pkt 1 SH/Spot on task bar > Alert unconfirmed country > > The above are selected > > RTTY Check for DX spots > Use bell character > > The above are selected > > No other check boxes are selected. > > I can not find any info in the help files regarding (all) grayed out spots. Hugh, did it used to work? Had you made any changes to the preferences before the problem started? Note that a spot must have RTTY in the comment field for it to be considered RTTY. Also check the 2nd tab of your preferences and make sure Options for grayed-out spots is not set to anything. There's a possibility that your configuration file is corrupt. First, save your preferences to a .INI file. Close DX4WIN and navigate to your 8.04 SAVE directory. Find the DX4WIN.CFG file and rename it. Then restart DX4WIN and see if the colors return. Hopefully you have an older saved .INI file of your preferences somewhere that you can merge into the new (empty) configuration file. The one you just made may be corrupt also. You could try merging it and see what happens. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DXSpots (Color)
I'm running ver 8.04 with Win XP. A problem has cropped up with the DX spots. All of my DX SPOTS are grayed out in the spot window, (NON ARE COLORED). In the preference selections Pkt 1 SH/Spot on task bar Alert unconfirmed country The above are selected RTTY Check for DX spots Use bell character The above are selected No other check boxes are selected. I can not find any info in the help files regarding (all) grayed out spots. TIA! Hugh, K7XM __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Printing QSL
How do you get the mode onto the QSL label? I print date, UTC Band and RST but no mode. Bob, W1EQ Using DYMO label machine __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Changing CW Speed using PK900 resolved
I finally figured out I don't have a "CW" window in DX4WIN. Because I'm using the PK900 as a dumb terminal in DX4WIN, it always is in "RTTY immediate mode". I have to type in "morse" in the command prompt to change CW and type "baudot" to go to RTTY. I looked in the PK900 parameters and found if I type in "MSPEED" at the cmd prompt that will change the CW speed. Sometime my brain functions pretty good . Thanks for all the replies - Happy Holidays! Bob WS1F __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Problem with Filter selection
Jim It is a WinXP installation just like the one on which it ran fine. I have been unable to find any difference, apart from the greyed out menu items. Very frustrating. 73 Bob, 5B4AGN On 3 December 2010 18:41, Jim Reisert AD1C wrote: > It sounds like you installed DX4WIN under C:\Program Files on a Vista > or Win7 operating system. You're running into Windows file protection > problems. > > Install it as C:\DX4W### instead. There is some information at > www.dx4win.com with installation tips for Vista/Win7 > > 73 - Jim AD1C > > On Fri, Dec 3, 2010 at 11:31 AM, Bob Henderson wrote: > > Hi Jim > > > > I have Expert mode enabled. I have also tried merging DX4WIN.ini from > the > > other computer but the items remain greyed out. Any other thoughts? > > > > Many thanks for helping. > > > > Bob, 5B4AGN > > > > On 3 December 2010 18:07, Jim Reisert AD1C > wrote: > >> > >> In your prefs, change to Export mode. > >> > >> You should have exported your prefs from the old computer to a .INI > >> file, then imported that .INI file on the new computer. > >> > >> - Jim > >> > >> On Fri, Dec 3, 2010 at 10:55 AM, Bob Henderson wrote: > >> > Hi guys > >> > > >> > I have needed to install DX4WIN on a different computer to the one I > >> > mostly > >> > use. The installation was successful but I find Files, Selection & > >> > Files, > >> > Edit Group Names to be both greyed out. No doubt there is some kind > of > >> > switch to enable these functions but despite a search I have failed to > >> > find > >> > it. The facility worked fine on my other computer. Reading the > >> > electronic > >> > manual hasn't so far led to a solution. As I have used multiple calls > >> > in > >> > one compound log, I need to filter on group names to make sense of > >> > cluster > >> > input. > >> > > >> > I would really appreciate some help in getting to the bottom of this. > >> > > >> > Many thanks. > >> > > >> > Bob, 5B4AGN > >> > __ > >> > Dx4win mailing list > >> > Home: http://mailman.qth.net/mailman/listinfo/dx4win > >> > Help: http://mailman.qth.net/mmfaq.htm > >> > Post: mailto:Dx4win@mailman.qth.net > >> > > >> > This list hosted by: http://www.qsl.net > >> > Please help support this email list: http://www.qsl.net/donate.html > >> > > >> > >> > >> > >> -- > >> Jim Reisert AD1C, , http://www.ad1c.us > >> > > > > > > > > -- > Jim Reisert AD1C, , http://www.ad1c.us > > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Problem with Filter selection
Hi Bob, I think it has to do with your "User Level". Go to File -> Preferences and look at the "User Level". It is likely Regular. Try Advanced or Expert. I think once you save the change, you need to exit DX4WIN and get back in for the change to take effect. 73, Lee N7NU >>> Bob Henderson 12/3/2010 9:55 AM >>> Hi guys I have needed to install DX4WIN on a different computer to the one I mostly use. The installation was successful but I find Files, Selection & Files, Edit Group Names to be both greyed out. No doubt there is some kind of switch to enable these functions but despite a search I have failed to find it. The facility worked fine on my other computer. Reading the electronic manual hasn't so far led to a solution. As I have used multiple calls in one compound log, I need to filter on group names to make sense of cluster input. I would really appreciate some help in getting to the bottom of this. Many thanks. Bob, 5B4AGN __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html !SIG:4cf92f2369562081415512! __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Problem with Filter selection
Hi guys I have needed to install DX4WIN on a different computer to the one I mostly use. The installation was successful but I find Files, Selection & Files, Edit Group Names to be both greyed out. No doubt there is some kind of switch to enable these functions but despite a search I have failed to find it. The facility worked fine on my other computer. Reading the electronic manual hasn't so far led to a solution. As I have used multiple calls in one compound log, I need to filter on group names to make sense of cluster input. I would really appreciate some help in getting to the bottom of this. Many thanks. Bob, 5B4AGN __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Special keys & Ctrl-Enter
Hey all, I find myself constantly looking trough the help file and manual to find a key associated with a particular function. They are called 'special keys.' Is there a summary of all of these special keys and their functions? Or a function and it's associated assigned key, if there is one. Second question: The return to last frequency function is defined as ctrl-Enter. I can't get this to work. Any tips or suggestions? Thanx for your time in reading this blurb. Regards, Walt Kornienko - K2WK k...@arrl.net k2wa...@gmail.com __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXCC Submissions and LoTW
Sorry, I didn't read all the way down. Yes, if a credit is already "Checked", I agree that it should remain checked (i.e. never needed to submit again) regardless of the settings of the QSL/LoTW/eQSL award flags. I believe I've also asked Paul for this before. 73 - Jim AD1C On Fri, Dec 3, 2010 at 10:25 AM, Jim Reisert AD1C wrote: > On Fri, Dec 3, 2010 at 8:46 AM, Dave Perry wrote: > >> No, unchecking Lotw will not work. The problem is with the Submissions >> report. If you uncheck Lotw, then the Submissions report includes cards for >> countries that were previously confirmed via Lotw confirmations. So the >> report becomes meaningless. This has been a shortcoming of the program for >> some time. I attempted to show Paul this problem at Dayton several years >> ago, but he did not understand the issue. > > You have to clear the submissions report and start all over. Once you > submit something, regardless of how it's confirmed, it will stay in > the report unless you start over. -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXCC Submissions and LoTW
On Fri, Dec 3, 2010 at 8:46 AM, Dave Perry wrote: > No, unchecking Lotw will not work. The problem is with the Submissions > report. If you uncheck Lotw, then the Submissions report includes cards for > countries that were previously confirmed via Lotw confirmations. So the > report becomes meaningless. This has been a shortcoming of the program for > some time. I attempted to show Paul this problem at Dayton several years > ago, but he did not understand the issue. You have to clear the submissions report and start all over. Once you submit something, regardless of how it's confirmed, it will stay in the report unless you start over. -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Time field question
On Fri, Dec 3, 2010 at 8:15 AM, Jack Shirley wrote: > Worked ZL8X on 17M RTTY using DX4WIN/MMTTY > Entered QSO... Didn't realize there was an error in the time field > until I uploaded to LOTW. > Somehow it recorded the time as ??:?? How can this happen? Why > wasn't there some type of error message? No idea how this can happen. > Also in the grid field , kP3APq ( AP is in red color fonts ) > sometime appears , without any other information entered into the > other blank fields. Is this coming from the Packet window ( ve7cc with > local host 7300 ) or ? It could be, if you are in real-time logging mode with a blank QSO. What node are you connected to? I could not find any such spots on VE7CC with that text in the spot comment field. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXCC Submissions and LoTW
No, unchecking Lotw will not work. The problem is with the Submissions report. If you uncheck Lotw, then the Submissions report includes cards for countries that were previously confirmed via Lotw confirmations. So the report becomes meaningless. This has been a shortcoming of the program for some time. I attempted to show Paul this problem at Dayton several years ago, but he did not understand the issue. The Submissions report for DXCC should be changed so that it takes into account both QSOs that were confirmed by either Lotw and/or card. If you are like me, I have almost 1,800 band/countries confirmed for the DXCC Challenge -- hundreds have been confirmed via Lotw and hundreds more by card. So unchecking Lotw as suggested by Paul and Jim will not work. If I do that, then the Submissions report tries to submit cards for countries that were previously confirmed by Lotw. So I have to keep Card and Lotw checked at all times in order for my DXCC statistics and submissions to make sense. What we need is a Submissions report that only lists Cards in Hand and will not attempt to submit a card for a country that was previously confirmed by Lotw and also checked by the DXCC desk. There is also a small wrinkle that occurs when I have confirmed a new country by card and by Lotw. In that case, I always submit that QSO to the ARRL via the online application process in Lotw. Why have a card checker check a card when I can have it automatically credited via Lotw? So the submissions report should allow the user to run it for "Cards in Hand" in which a Lotw confirmation is also not pending. In other words, when a country has been confirmed both ways, I want to use the Lotw confirmation -- and thus the card for that country should not be listed on the Submissions report. I have an elaborate routine by which I have to run the Submissions report, export the file, and then use Excel to delete the Lotw confirmations so that only Card in Hand QSOs (not previously confirmed by Lotw) are listed on the new Submissions report. I then have to clear all Submit flags in DX4WIN. Enter only the QSOs being confirmed via Lotw, rerun the Submissions report, export the file, and then use Excel to delete the Lotw confirmations so that the Excel report only shows "Cards in hand" that were not also confirmed by Lotw. A few simple changes to the Submissions report for DXCC would greatly automate and streamline the submission process. Again, simply unchecking Lotw under File, Awards will not work. I have to keep both Card and Lotw checked at all times in order for the DXCC records to make sense. Do others agree that this would be a valuable enhancement to the program? Dave, N4QS - Original Message - From: "F6EXV Paul" To: Sent: Friday, December 03, 2010 5:53 AM Subject: Re: [Dx4win] DXCC Submissions and LoTW Hello Under Files/Awards, uncheck "LoTW" in the "confirmation" box. 73 Paul F6EXV Le 03/12/2010 12:35, Rick Murphy a écrit : > Last night I found that I had a big problem with my log - I printed out a > submission report and started pulling cards and couldn't find cards for most > of the confirmations on the list. This seemed pretty odd until I noticed > that all of these were marked by DX4WIN as confirmed by LoTW, however when I > looked at the site there was no QSL. > > What apparently happened is that I downloaded a chunk of my log, used > LoTW/Import for LOTW to import those and DX4WIN didn't check if the contacts > were confirmed, setting the LoTW "Cnfm" flag for all QSOs. > > I was able to recover from this by clearing all of the LoTW confirm flags > (create a selection with Cnfm:Y in the LoTW column then "LoTW/Clear LoTW > confirmed" which cleared all of them. Downloaded QSLs (not QSOs!) from LoTW > from all of my calls and re-imported, now it looks correct. > I just wanted to warn anyone to be careful what you load into DX4WIN. > > Another issue is that the submission report includes all confirmations, > paper plus LoTW. This means that I can't just use it as is (i.e. hand it to > a field checker with my stack of cards) because the LoTW QSLs will need to > be deleted. > Is there a way that I can create a card-in-hand only submission report? > 73, > -Rick __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Time field question
Worked ZL8X on 17M RTTY using DX4WIN/MMTTY Entered QSO... Didn't realize there was an error in the time field until I uploaded to LOTW. Somehow it recorded the time as ??:?? How can this happen? Why wasn't there some type of error message? Also in the grid field , kP3APq ( AP is in red color fonts ) sometime appears , without any other information entered into the other blank fields. Is this coming from the Packet window ( ve7cc with local host 7300 ) or ? ver 7.07.02 I wanted to reload this version, but do not see it available for download. Jack N8DX __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] LoTW Confirmation flag set but no QSL?
On Thu, Dec 2, 2010 at 7:45 PM, Rick Murphy wrote: > First, how do I stop QSOs that are confirmed only on LoTW from showing up in > the DXCC submission report? As it is, I've got to download the report as CSV > and remove the LoTW QSLs by hand. If you are running 8.0x, go to File | Awards, click on the DXCC tab, then in the Confirmation box, uncheck LoTW. > More importantly, why do I seem to have hundreds of QSOs where DX4WIN says > "Cnfm: Y" on the LoTW row but where LoTW doesn't record a QSL? Is there some > way that I can clear all of the LoTW confirmation flags and re-import? There are options in the QSO window under LoTW for doing this. 73 - Jim aD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXCC Submissions and LoTW
On Fri, Dec 3, 2010 at 6:53 AM, F6EXV Paul wrote: > Hello > Under Files/Awards, uncheck "LoTW" in the "confirmation" box > Thanks, Paul. I'm glad it's that easy. 73, -Rick -- Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXCC Submissions and LoTW
Hello Under Files/Awards, uncheck "LoTW" in the "confirmation" box. 73 Paul F6EXV Le 03/12/2010 12:35, Rick Murphy a écrit : > Last night I found that I had a big problem with my log - I printed out a > submission report and started pulling cards and couldn't find cards for most > of the confirmations on the list. This seemed pretty odd until I noticed > that all of these were marked by DX4WIN as confirmed by LoTW, however when I > looked at the site there was no QSL. > > What apparently happened is that I downloaded a chunk of my log, used > LoTW/Import for LOTW to import those and DX4WIN didn't check if the contacts > were confirmed, setting the LoTW "Cnfm" flag for all QSOs. > > I was able to recover from this by clearing all of the LoTW confirm flags > (create a selection with Cnfm:Y in the LoTW column then "LoTW/Clear LoTW > confirmed" which cleared all of them. Downloaded QSLs (not QSOs!) from LoTW > from all of my calls and re-imported, now it looks correct. > I just wanted to warn anyone to be careful what you load into DX4WIN. > > Another issue is that the submission report includes all confirmations, > paper plus LoTW. This means that I can't just use it as is (i.e. hand it to > a field checker with my stack of cards) because the LoTW QSLs will need to > be deleted. > Is there a way that I can create a card-in-hand only submission report? > 73, > -Rick __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DXCC Submissions and LoTW
Last night I found that I had a big problem with my log - I printed out a submission report and started pulling cards and couldn't find cards for most of the confirmations on the list. This seemed pretty odd until I noticed that all of these were marked by DX4WIN as confirmed by LoTW, however when I looked at the site there was no QSL. What apparently happened is that I downloaded a chunk of my log, used LoTW/Import for LOTW to import those and DX4WIN didn't check if the contacts were confirmed, setting the LoTW "Cnfm" flag for all QSOs. I was able to recover from this by clearing all of the LoTW confirm flags (create a selection with Cnfm:Y in the LoTW column then "LoTW/Clear LoTW confirmed" which cleared all of them. Downloaded QSLs (not QSOs!) from LoTW from all of my calls and re-imported, now it looks correct. I just wanted to warn anyone to be careful what you load into DX4WIN. Another issue is that the submission report includes all confirmations, paper plus LoTW. This means that I can't just use it as is (i.e. hand it to a field checker with my stack of cards) because the LoTW QSLs will need to be deleted. Is there a way that I can create a card-in-hand only submission report? 73, -Rick -- Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html