Re: [Dx4win] Print QSL Cards
I have done this. Not sure if this is the best way but here is what I did. I made a custom label the size of the card with nr across 1 nr down 1 Paper size Custom then adjusted the left and top spacing to put the printing where I wanted it. It actually worked quite well with an ink jet, BUT. A couple of thoughts on consumer grade printers. Ink jet printing is hopeless if it gets wet and I have had people request a replacement card because the postie dropped the letter in a puddle or something. Laser printers don't print very well on heavy card just not enough heat to fuse the toner properly, yes some have a setting for heavier paper. I'll let others decide if their laser fuses the toner good enough but I have gone back to labels and a laser printer. 73 John ZL1BYZ. -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of William Liporace Sent: Monday, 21 March 2016 14:01 To: Dan Violette; 'DX4WIN POSTINGS' Subject: Re: [Dx4win] Print QSL Cards I was hoping to print directly on the back of my pre printed QSL cards... This is my third call. I have three different cards (and styles). I can do labels for the other other two. My current printer is a Brother HL-5250. I also have a HP OfficeJet Pro 8610, but that has not as easy to setup (as I can tell). TNX Will WC2L On 3/20/2016 8:46 PM, Dan Violette wrote: > Will, Is this preprinted cards and you want to go in a blank spot > instead of sticking on a label (that is what I do)? What printer do you expect to use? > This will all help for replies since everyone is in a different > situation and lots of customizing needed. Dan KI6X > > -Original Message- > From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of > William Liporace > Sent: Sunday, March 20, 2016 5:07 PM > To: DX4WIN POSTINGS > Subject: [Dx4win] Print QSL Cards > > I was looking at testing printing directly to QSL cards. I am using > typical QSL card stock that is 3.5x5.5. Can someone tell me how to get > DX4WIN to print directly on the cards?? > > TNX Will > > -- > William Liporace WC2L > http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet > dxc.wc2l.com or 144.93 MHz w...@wc2l.com > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > > -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Print QSL Cards
I was hoping to print directly on the back of my pre printed QSL cards... This is my third call. I have three different cards (and styles). I can do labels for the other other two. My current printer is a Brother HL-5250. I also have a HP OfficeJet Pro 8610, but that has not as easy to setup (as I can tell). TNX Will WC2L On 3/20/2016 8:46 PM, Dan Violette wrote: Will, Is this preprinted cards and you want to go in a blank spot instead of sticking on a label (that is what I do)? What printer do you expect to use? This will all help for replies since everyone is in a different situation and lots of customizing needed. Dan KI6X -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of William Liporace Sent: Sunday, March 20, 2016 5:07 PM To: DX4WIN POSTINGS Subject: [Dx4win] Print QSL Cards I was looking at testing printing directly to QSL cards. I am using typical QSL card stock that is 3.5x5.5. Can someone tell me how to get DX4WIN to print directly on the cards?? TNX Will -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Print QSL Cards
Will, Is this preprinted cards and you want to go in a blank spot instead of sticking on a label (that is what I do)? What printer do you expect to use? This will all help for replies since everyone is in a different situation and lots of customizing needed. Dan KI6X -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of William Liporace Sent: Sunday, March 20, 2016 5:07 PM To: DX4WIN POSTINGS Subject: [Dx4win] Print QSL Cards I was looking at testing printing directly to QSL cards. I am using typical QSL card stock that is 3.5x5.5. Can someone tell me how to get DX4WIN to print directly on the cards?? TNX Will -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Print QSL Cards
I was looking at testing printing directly to QSL cards. I am using typical QSL card stock that is 3.5x5.5. Can someone tell me how to get DX4WIN to print directly on the cards?? TNX Will -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK and Comm Ports
I have been running a USB to Serial adapter to read my FT-857D data into DX4WIN 8.05. Now I am trying to hook up a RigBlaster Plus to run PSK31 and key the radio. I've had the RigBlaster for a while and haven't been able to get the rigblaster to go into the PTT / Tx mode. I now think my Prolific USB-Serial adapter is bad. Which leads to my question. I know how and where to set the Comm port to read the radio data into DX4WIN. Can I do both, read the radio data in and also run the PSK window or do I have to set up to run PSK with the second Radio preferences set to the different PSK Comm port? NS4Jay Bicycling is a big part of the future. It has to be. There's something wrong with a society that drives a car to workout in a gym. ~ Bill Nye the Science Guy __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN Award database release 16.3 - 20 March 2016
The DX4WIN Award database was updated on 20 March 2016. It contains 206 awards. This is a link to the release notes: http://dx4win.ad1c.us/awards/index.html#16.3 You can download a ZIP file of the database from: http://dx4win.ad1c.us/awards But it's easier to use the DX4WIN Data Updater: http://dx4win.ad1c.us/updater The ZIP file also contains a number of membership list files (plain-text files with a .list extension). These can be used to identify member calls in the DX Spots window. Please read the application note on Membership Lists for more information. Here are the changes: 16.3 - 20 March 2016 [30MDG] 30 Meter Digital Group (updated) [ANP16] ARRL National Parks on the Air (updated) [ARLHS] Amateur Radio Lighthouse Society (updated) [CAST] Diploma Castillos de Espa�a (updated) [CWOP] CW Operators' Club (updated) [DCI] Italian Castles Award (DCI) (updated) [DEE] Diploma Ermitas de Espa�a (updated) [DFB] Brazilian Lighthouses (DFB) (updated) [DFCF] French Forts and Castles (DFCF) (updated) [DIG] Diplom Interessen Gruppe (updated) [SDOK] German Sonder-DOK (updated) [DVGE] Diploma V�rtices Geod�sicos de Espa�a (updated) [FOC] First Class CW Operators' Club (updated) [INCA] Italian Navy Coastal Award (added) [NAQRP] North American QRP CW Club (updated) [OBLA] Russian Oblasts (updated) [P070] PODXS 070 Club (updated) [SKCC] Straight Key Century Club (updated) [SOTA] Summits on the Air (updated) [USIA] United States Islands Award (updated) [WADA] Worked Antarctic Directory Award (updated) [WAIL] Worked All Italian Lighthouses (added) [WFF] WorldWide Flora Fauna (updated) Please let me know if there are any problems. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN/CW Skimmer/SDR RX controlling "slave radio" TX frequency
Some time ago I was kicking my head how to listen permanently to DX-ped's frequency, while being able to select any QSX TX frequency by click on the Skimmer, even with QSX going beyond the +12kHz Skimmer's range. And just found a solution which I wish to share with anybody interested: I kept SDR RX controlled by DX4WIN and Skimmer via RCP1 and RCP2 of DDUtil, but instead of controlling 1000MP from the "slave radio" port of DDUtil, I have installed the DXLab's Commander and W3OA's Skimmer-to-Commander. I programmed Commander to control the FT1000MP via CAT1 port of the microHAM Router, and connected Skimmer-to Commander to Skimmer's Telnet Localport 701 (which was programmed in Skimmer's Telnet Tab, where also the "allow skimmer commands" was checked). Now, in Telnet-to-Commander window, I can select whether the click on Skimmer's frequency sets vfoA or vfoB of the 1000MP, so I can now permanently listen DX-ped frequency on Main RX vfoA and transmit on any QSX frequency selected on Skimmer via vfoB of the 1000MP ! The Commander and StC can be then left hidden on the Taskbar! Hope this may be useful for others. Best 73, Radi F6GNZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN.CTY country file Release #16.5 - 18 March 2016
The DX4WIN country file, DX4WIN.CTY Release #16.5 is now available from: http://www.country-files.com/dx4win-info/ You can read the release notes at: http://www.country-files.com/dx4win-cty-16.5-18-March-2016/ You can (and should) use the DX4WIN Data Updater to update the file: http://dx4win.ad1c.us/updater/ Please inform me of any corrections. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html