Re: [Dx4win] [WriteLog] Fwd: Re: new mystery

2016-07-19 Thread Joe Subich, W4TV 



SSB/vox works just fine. so went to options in mmtty and discovered
somehow under DEVICES it was showing -1, changed those to 1 and all
is back to normal again.


In the future, check the "SoundCard" tab in MMTTY | Config rather than
the Misc tab.  The SoundCard tab provides a list - with "radio" buttons
for selection - of available sound cards.

Device -1 in the "Misc" tab is the Windows Default card (which should
*never* point to either Line or Headset Mic inputs of microHAM CODEC).
1 is something else (the SoundCard tab will tell you).

In any case, follow the "Configuring microHAM CODEC" section of the
microKEYER II Users Manual and *don't* open the MMTTY (or PSK) Window
of DX4win while running phone (if you expect to be able to record DVK
messages).

73,

   ... Joe, W4TV

On 7/19/2016 9:22 AM, Courtney Judd wrote:


thanks for the response Joe everything was all ok with the
router spent a lot of time with it ended up deleting everything
and started over with new presets problem was still there. Thought
about this several times during the night and decided it had to be a
dx4win issue as that was the only time it showed up. So this morning I
was going over and over the preferences in dx4win and thought about the
rtty/mmtty window being open. I closed it and problem went away. SSB/vox
works just fine. so went to options in mmtty and discovered somehow
under DEVICES it was showing -1, changed those to 1 and all is back to
normal again.  Life was much simpler under XP... guess win 10 must have
changed those values. Took me over 5 hours to sort this out... but all
is good now! Thanks for all the suggestions! 73's Cort K4WI

microHAM Support (W4TV) 
Tuesday, July 19, 2016 8:03 AM


Is microHAM Router properly following the frequency and mode of your
transceiver?

What are the settings on the Audio Switching tab in microHAM Router?
Is the Voice/Digital settings selector set to "Use Voice Settings"?

Is "Computer generated audio fed to:" set to "Microphone jack, DVK
Control" for voice?

Your symptoms indicate the audio is set improperly with the mic
routed *through* the sound card/computer.  When MMTTY opens, the
sound card input is switched from mic to line disabling your audio.

73,

... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM

supp...@microham.com


This message, including any attachments, may contain proprietary,
confidential or privileged information for the sole use of the
specific individual(s) to whom it is addressed. You are hereby
notified that any disclosure, copying, distribution, or use of this
message is prohibited. If you have received this message in error,
please immediately notify the sender by reply e-mail and delete it.




___
WriteLog mailing list
write...@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Fwd: Re: new mystery

2016-07-19 Thread Courtney Judd 


thanks for the response Joe everything was all ok with the 
router spent a lot of time with it ended up deleting everything 
and started over with new presets problem was still there. Thought 
about this several times during the night and decided it had to be a 
dx4win issue as that was the only time it showed up. So this morning I 
was going over and over the preferences in dx4win and thought about the 
rtty/mmtty window being open. I closed it and problem went away. SSB/vox 
works just fine. so went to options in mmtty and discovered somehow 
under DEVICES it was showing -1, changed those to 1 and all is back to 
normal again.  Life was much simpler under XP... guess win 10 must have 
changed those values. Took me over 5 hours to sort this out... but all 
is good now! Thanks for all the suggestions! 73's Cort K4WI

microHAM Support (W4TV) 
Tuesday, July 19, 2016 8:03 AM


Is microHAM Router properly following the frequency and mode of your
transceiver?

What are the settings on the Audio Switching tab in microHAM Router?
Is the Voice/Digital settings selector set to "Use Voice Settings"?

Is "Computer generated audio fed to:" set to "Microphone jack, DVK 
Control" for voice?


Your symptoms indicate the audio is set improperly with the mic
routed *through* the sound card/computer.  When MMTTY opens, the
sound card input is switched from mic to line disabling your audio.

73,

... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM

supp...@microham.com


This message, including any attachments, may contain proprietary, 
confidential or privileged information for the sole use of the 
specific individual(s) to whom it is addressed. You are hereby 
notified that any disclosure, copying, distribution, or use of this 
message is prohibited. If you have received this message in error, 
please immediately notify the sender by reply e-mail and delete it.





__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Fwd: Re: new mystery

2016-07-19 Thread Joe Subich, W4TV 


Is microHAM Router properly following the frequency and mode of your
transceiver?

What are the settings on the Audio Switching tab in microHAM Router?
Is the Voice/Digital settings selector set to "Use Voice Settings"?

Is "Computer generated audio fed to:" set to "Microphone jack, DVK 
Control" for voice?


Your symptoms indicate the audio is set improperly with the mic
routed *through* the sound card/computer.  When MMTTY opens, the
sound card input is switched from mic to line disabling your audio.

73,

   ... Joe, W4TV

On 7/19/2016 8:26 AM, Courtney Judd wrote:


well, I found a partial solution to my new problem. Everything worked
fine with no program open, worked fine with writelog; but when I opened
DX4WIN I would lose the transmit audio, no vox, could manually key the
rig but no audio. I redid everything but no fix. Since this only showed
up under dx4win the problem had to be there. Normally, I have the
rtty/mmtty window open along with the rest of the windows... on a hunch
I closed them and voila SSB audio is back. So now the problem is
narrowed to the rtty settings... looked at them and all seems as usual
but something had to have changed... just have to find it! So far I have
at least 5 hours of time racked up messing with this! Life used to be
simple lol, thanks, Cort K4WI

*From:* kostas sv1dpi 
*Date:* Monday, July 18, 2016 11:57 PM
*To:* dx4win@mailman.qth.net
*Subject:* [Dx4win] new mystery
sometimes, windows "loose" the microham souncard. Check this and if
this is the problem, unplug the usb from microham and plug it again.

73 Kostas SV1DPI



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Fwd: Re: new mystery

2016-07-19 Thread Courtney Judd 


well, I found a partial solution to my new problem. Everything worked 
fine with no program open, worked fine with writelog; but when I opened 
DX4WIN I would lose the transmit audio, no vox, could manually key the 
rig but no audio. I redid everything but no fix. Since this only showed 
up under dx4win the problem had to be there. Normally, I have the 
rtty/mmtty window open along with the rest of the windows... on a hunch 
I closed them and voila SSB audio is back. So now the problem is 
narrowed to the rtty settings... looked at them and all seems as usual 
but something had to have changed... just have to find it! So far I have 
at least 5 hours of time racked up messing with this! Life used to be 
simple lol, thanks, Cort K4WI

*From:* kostas sv1dpi 
*Date:* Monday, July 18, 2016 11:57 PM
*To:* dx4win@mailman.qth.net
*Subject:* [Dx4win] new mystery
sometimes, windows "loose" the microham souncard. Check this and if 
this is the problem, unplug the usb from microham and plug it again.


73 Kostas SV1DPI



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html