Re: [Dx4win] Version 9.05 available

[exbpi]

I assume you mean the country band window and have gone to "Window" - "Country"

It could also be hiding behind another window.

GL 

Mike
K7PI

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Tim moore
Sent: Tuesday, June 18, 2019 21:02
To: n...@vci.net
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] Version 9.05 available

Funny, after updating, my Band Map won't even come up anymore. I don't see it 
anymore. Used to work perfectly. Now, it's missing...

K4TK



Tim Moore
PMP


On Mon, Jun 17, 2019 at 3:45 PM  wrote:

> Dick,
>
>
>
> There are a couple ways that I adjust the frequency range to keep the 
> red arrow visible.  First, you can click on the checkmark on the 
> bottom.  That re-centers the bandmap and makes the whole band visible.  
> You can also hit the plus or minus signs at the bottom until you see the red 
> arrow again.
> But if you tune the radio off the top or bottom of the scale, my 
> version will automatically move the scale up or down to follow the red arrow.
>
>
>
> Dave, N4QS
>
>
>
> From: Tom Doligalski 
> Sent: Monday, June 17, 2019 3:34 PM
> To: Dick Grolleman ; n...@vci.net
> Cc: DX4WIN Reflector 
> Subject: RE: [Dx4win] Version 9.05 available
>
>
>
> Aha. That’s exactly what mine does. However I have a pretty large 
> window open for the bandmap, so I rarely “loose” the red arrow.
>
>
>
> Tom W4KX
>
>
>
> Sent from Mail   for 
> Windows 10
>
>
>
> From: Dick Grolleman 
> Sent: Monday, June 17, 2019 4:10 PM
> To: n...@vci.net 
> Cc: DX4WIN Reflector 
> Subject: Re: [Dx4win] Version 9.05 available
>
>
>
> Hi Dave,
>
>
>
> Yes it is checked for follow Radio,
>
>
>
> The red arrow moves, but disappears from the map, as the map is not 
> moving anywhere. I have to use the slider to see the red arrow again. 
> Been that wat since version 8.
>
> I did ask questions then, but never got an answer, or any help.
>
> I have been a DX4WIN user from the start, but this is the only thing 
> that never worked for me.
>
>
>
> 73 Dick PA3FQA
>
>
>
> -Oorspronkelijk bericht-
>
> Van: n...@vci.net    n...@vci.net> >
>
> Verzonden: maandag 17 juni 2019 22:04
>
> Aan: 'Dick Grolleman' mailto:pa3...@outlook.com> 
> >; 'Paul van der Eijk'  
> >
>
> CC: 'DX4WIN Reflector'  dx4win@mailman.qth.net> >
>
> Onderwerp: RE: [Dx4win] Version 9.05 available
>
>
>
> Dick,
>
>
>
> Do you have Follow Radio checked at the bottom of the DX4WIN bandmap?  
> You may have to open the bandmap window all the way from top to bottom 
> so that you can see the bottom section.  When you do that, it should 
> follow your K3.  The red arrow moves up and down as you tune and it 
> automatically updates with new spot info when your radio changes to a 
> different band.
>
>
>
> 73,
>
>
>
> Dave, N4QS
>
>
>
> -Original Message-
>
> From: dx4win-boun...@mailman.qth.net  dx4win-boun...@mailman.qth.net>   dx4win-boun...@mailman.qth.net> > On Behalf Of Dick Grolleman
>
> Sent: Monday, June 17, 2019 12:13 PM
>
> To: Paul van der Eijk  
> >
>
> Cc: DX4WIN Reflector  dx4win@mailman.qth.net> >
>
> Subject: Re: [Dx4win] Version 9.05 available
>
>
>
> Pity Still having problems with the band map not following the radio. 
> This was the case in version 8, and still is not working in version 9.  
> The radio is a elecraft K3, I own it since 2008 and never operated 
> with any of the band maps in DX4WIN. It does work with Wintest 
> however. DX4WIN reads the radio ok. The top of the band map shows the 
> frequency, but the map is not moving as I turn the VFO. Well some 
> people never turn the VFO anyway, they stick to the FT8/ FT4 QRGs. 
>
>
>
> 73 de  Dick PA3FQA
>
>
>
>
>
>
>
> -Oorspronkelijk bericht-
>
> Van: dx4win-boun...@mailman.qth.net 
> 
>   > Namens Paul van der Eijk
>
> Verzonden: zondag 16 juni 2019 22:50
>
> Aan: DX4WIN Reflector  dx4win@mailman.qth.net> >
>
> Onderwerp: [Dx4win] Version 9.05 available
>
>
>
> When doing Help | Check for Updates you will find a new version for 
> the executable and other files.
>
>
>
> This is the change log:
>
>
>
> When editing a QSO, do not reset county if state changed and county is 
> still valid
>
>
>
> Error message when country database cannot be found
>
>
>
> Added more satellites
>
>
>
> Made Winkey interface compatible with newer versions
>
>
>
> Redid IOTA checking; changes made are applied to the QSO. Values that 
> were replaced are shown in the QSO Notes
>
>
>
> Added MFSK sub-modes FT4 and JS8
>
>
>
> During import, check for a valid island code
>
>
>
> Multiple QSO operations will now remove multiple import messages
>
>
>
> Custom award check did not mark QSO as changed when award was changed; 
> Report the count of the number of 

Re: [Dx4win] winkey

[Joe Subich, W4TV]

What are your Winkey settings in the CW Keyboard/WinKey settings?

The settings shown in the example configuration for MK II and Dx4Win
work properly with the demo (9.0.5.1221) and both MK II (Winkey v.10)
and MK III (WinKey v.30).

73,

   ... Joe, W4TV


On 2019-06-18 8:01 PM, Courtney Judd wrote:
upgraded to latest 9.05 and the winkeyer doesn't work. I am using FT5000 
with microKeyer2. Everything worked in previous version but now radio 
keys up and it acts like it is sending but nothing happening. Checked 
both dx4win and microham software but don't see what needs to be 
adjusted... radio and PTT is on com5 and winkeyer on com4 any ideas? 
73's Cort K4WI


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4win / WINKEY interface still apparently broken

[Artek Manuals]

I have a different version of the problem

The short version is that when sending CW from DX4win using WINKEY ( 
ALT-K) the DOT and DASH are reversed?


 I was using DX4WIN 9.03 and Winkey Firmware 30.1 ( Firmware 31.2 would 
not work with DX4WIN 9.03...known bug)


Today I upgraded DX4WIN to 9.05 now NEITHER version of Winkey Firmware ( 
30.1 nor 31.2) work correctly with DX4WIN ... 8^(


WINKEY still works correctly with other programs, most notably N1MM with 
both versions of the Winkey firmware. So PAUL I assume the bug is still 
resides on your side of the aisle


Dave
NR1DX


On 6/18/2019 8:01 PM, Courtney Judd wrote:
upgraded to latest 9.05 and the winkeyer doesn't work. I am using 
FT5000 with microKeyer2. Everything worked in previous version but now 
radio keys up and it acts like it is sending but nothing happening. 
Checked both dx4win and microham software but don't see what needs to 
be adjusted... radio and PTT is on com5 and winkeyer on com4 any 
ideas? 73's Cort K4WI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



--
Dave
manu...@artekmanuals.com
www.ArtekManuals.com


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] winkey

[Courtney Judd]

upgraded to latest 9.05 and the winkeyer doesn't work. I am using FT5000 
with microKeyer2. Everything worked in previous version but now radio 
keys up and it acts like it is sending but nothing happening. Checked 
both dx4win and microham software but don't see what needs to be 
adjusted... radio and PTT is on com5 and winkeyer on com4 any ideas? 
73's Cort K4WI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] 9.0.5.1221

[William Osborne]

I my just be getting old, but it seems to me the colors and alerts in this 
version are very different from the old ones.  Issues I have:

* After hitting f9 I think the square in the country window stayed on the 
country/mode of the spot? Mine now goes to that place then returns to the 
current freq/mode of the radio.
* The announcements seem to be for the lowest level award the spot satisfies.  
I have mine set to announce "new award mode" and it still announces new award 
bands?  What if it is a new country will it still announce as a new award 
band
* Same with the colors."new award mode" is listed in the documentation as a 
higher ranked even (2 vs3) than "new award band" but for spots that are both 
mine colors  the spot as a new band.
All I want is for CW and Digital spots to be announced if they are new or 
unconfirmed, but I simply cannot seem to be able to do this.  Any help would be 
appreciated.

Best 73,Bill--K5ZQ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Printer "setup" problem in v9.05?

[Lee Hallin]

Running on a PC running Windows 7 Pro.

I don't know if this a general problem or one related to, perhaps, my printer 
(HP LJ 4000, parallel port connected).

If I click WINDOWS -> Logbook
Then Right click and click PRINT, then click Setup -> Landscape -> OK, then OK 
to actually print, I get the Logbook printed in "Portrait" instead of Landscape.

I did it twice and the same behavior.

For grins, I tried the same scenario using DX4WIN v9.01 on a different PC and a 
different printer and it printed in landscape.  Don't know if it printed in 
Landscape because there is an issue with Setup on my HP LJ 4000?  Or if it is 
related to the DX4WIN version 0.05 vs v9.01.

Has anyone else seen this behavior?

73,
Lee  N7NU

P.S.  I upgraded from v9.04 to 9.05.  DX4WIN restarted and I did the above 
scenario.  I did NOT re-boot between the upgrade and running the above 
scenario.  I'll reboot the PC tonight (when I get home) and see if that makes a 
difference.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html