Re: [Dx4win] VUCC totals not accurate

2022-07-29 Thread Paul van der Eijk 
David,

You can email your log to me and I will have a look,

--Paul, KK4HD

On Fri, Jul 29, 2022 at 5:03 PM David Perry, N4QS  wrote:

> Mike,
>
> Thanks for suggestion, but that did not fix the problem.  No matter how I
> set the award flags under the VUCC tab, a confirmed CW contact with AB0S in
> EM09 shows W in the VUCC window and on the VUCC report listing.  Can anyone
> else see what I am talking about?
>
> Thank you.  73,  Dave, N4QS
>
>
>
> -Original Message-
> From: Mike Cizek W0VTT 
> Sent: Friday, July 29, 2022 3:30 PM
> To: 'David Perry, N4QS' ; dx4win@mailman.qth.net
> Subject: RE: [Dx4win] VUCC totals not accurate
>
> Hello Dave,
>
> There is one more place to check.  Starting with the menu bar up at the
> top:
> File > Awards > VUCC Grid
> Make sure you have the proper boxes checked under Confirmation, Mode group,
> Valid modes, Valid bands, and Award bands.  Under Awards, only the Mode box
> should be checked.
>
> 
> 73,
> Mike Cizek W0VTT
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net  On
> Behalf Of David Perry, N4QS
> Sent: Friday, 29 July, 2022 15:04
> To: dx4win@mailman.qth.net
> Subject: [Dx4win] VUCC totals not accurate
>
> After all these years, I am just starting to focus on VUCC and FFMA awards
> for six meters.  For VUCC, my confirmed totals in DX4WIN are about 70 less
> that my totals showing on LOTW.  (I have very few grids confirmed via QSL
> card.)  When I open the VUCC window, it is also apparent that confirmations
> for CW and SSB are not showing as C.  Under Reports, Awards, VUCC tab, I
> have all modes selected.  The same thing happens when I run a VUCC report
> listing - confirmations for CW and SSB on 6 meters do not show up as
> confirmed.
>
>
>
> For example, for EM09 in Kansas, LOTW shows that grid was confirmed with
> AB0S.  When I look up that QSO in DX4WIN, the Confirm LOTW box is set for Y
> - so it is marked as confirmed in DX4WIN.  But in the VUCC window, EM09
> only
> shows a W in the CW and SSB boxes-there should be a C in the CW box.  If I
> double click on the 6 at the top, all of my QSOs with EM09 on 6 meters are
> shown, and AB0S clearly shows that it was confirmed via LOTW.
>
>
>
> So why are these CW and SSB confirmations not showing up in the VUCC window
> and on the VUCC reports?
>
>
>
> 73,
>
>
>
> Dave
>
>
>
> David Perry, N4QS
>
>
>
> 3600 Savoy Circle
>
> Paducah, KY  42001
>
>
>
> n...@vci.net 
>
>
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


-- 
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Packet Connection

2022-07-29 Thread abwltrs 
Hello,

 

I am unable to connect with any spotting network using DX4WIN although all
is Okay using N1MM.  My settings in Packet 1 are Regular and TCP/IP.
Cluster node auto connect is LOCAL>cc User, localhost:7300. Callsign K5NOF.
Keep alive 90.  My call appears in the Packet Window but nothing.  No
connection.  So next I try selecting K5DX>Houston-TX from the cluster menu.
My call appears in the Packed Window but no connection.  Additionally, I
have tried to launch the band map (DX Spots Sorted by Time/right click/Band
Map and nothing.

 

In desperation, wondering if a near-by lightning strike could have damaged
the basic code, I copied my original save director to an off board hard
drive, deleted c:\dx4w903 and then downloaded a fresh install, dropped my
license into the folder, replaced the default save directory with my old
save directory, and after a bunch of agony, have all running again except
for the packet connection and the band map window. 

 

Again, all is normal using N1MM.  Any help would be appreciated.

 

Al Walters - K5NOF

 

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VUCC totals not accurate

2022-07-29 Thread David Perry, N4QS 
Mike,

Thanks for suggestion, but that did not fix the problem.  No matter how I
set the award flags under the VUCC tab, a confirmed CW contact with AB0S in
EM09 shows W in the VUCC window and on the VUCC report listing.  Can anyone
else see what I am talking about?

Thank you.  73,  Dave, N4QS



-Original Message-
From: Mike Cizek W0VTT  
Sent: Friday, July 29, 2022 3:30 PM
To: 'David Perry, N4QS' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] VUCC totals not accurate

Hello Dave,

There is one more place to check.  Starting with the menu bar up at the top:
File > Awards > VUCC Grid
Make sure you have the proper boxes checked under Confirmation, Mode group,
Valid modes, Valid bands, and Award bands.  Under Awards, only the Mode box
should be checked.


73,
Mike Cizek W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of David Perry, N4QS
Sent: Friday, 29 July, 2022 15:04
To: dx4win@mailman.qth.net
Subject: [Dx4win] VUCC totals not accurate

After all these years, I am just starting to focus on VUCC and FFMA awards
for six meters.  For VUCC, my confirmed totals in DX4WIN are about 70 less
that my totals showing on LOTW.  (I have very few grids confirmed via QSL
card.)  When I open the VUCC window, it is also apparent that confirmations
for CW and SSB are not showing as C.  Under Reports, Awards, VUCC tab, I
have all modes selected.  The same thing happens when I run a VUCC report
listing - confirmations for CW and SSB on 6 meters do not show up as
confirmed.

 

For example, for EM09 in Kansas, LOTW shows that grid was confirmed with
AB0S.  When I look up that QSO in DX4WIN, the Confirm LOTW box is set for Y
- so it is marked as confirmed in DX4WIN.  But in the VUCC window, EM09 only
shows a W in the CW and SSB boxes-there should be a C in the CW box.  If I
double click on the 6 at the top, all of my QSOs with EM09 on 6 meters are
shown, and AB0S clearly shows that it was confirmed via LOTW.

 

So why are these CW and SSB confirmations not showing up in the VUCC window
and on the VUCC reports?

 

73,

 

Dave

 

David Perry, N4QS

 

3600 Savoy Circle

Paducah, KY  42001

 

n...@vci.net  

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX4WIN.CTY country file Release #22.27 - 29 July 2022

2022-07-29 Thread Jim Reisert AD1C 
DX4WIN country file release #22.27 is now available from:

https://www.country-files.com/dx4win-info/

You can read the release notes at:

https://www.country-files.com/dx4win-cty-22.27-29-july-2022/

DX4WIN 9 users should use Help | Check for Updates from the main menu.
Note that there may be a delay between this announcement and when the
updated country file is actually available.

Users of older versions of DX4WIN should use the DX4WIN Data Updater:

https://ad1c.us/dx4win/updater/

Please inform me of any corrections.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , https://ad1c.us



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VUCC totals not accurate

2022-07-29 Thread Mike Cizek W0VTT 
Hello Dave,

There is one more place to check.  Starting with the menu bar up at the top:
File > Awards > VUCC Grid
Make sure you have the proper boxes checked under Confirmation, Mode group,
Valid modes, Valid bands, and Award bands.  Under Awards, only the Mode box
should be checked.


73,
Mike Cizek W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of David Perry, N4QS
Sent: Friday, 29 July, 2022 15:04
To: dx4win@mailman.qth.net
Subject: [Dx4win] VUCC totals not accurate

After all these years, I am just starting to focus on VUCC and FFMA awards
for six meters.  For VUCC, my confirmed totals in DX4WIN are about 70 less
that my totals showing on LOTW.  (I have very few grids confirmed via QSL
card.)  When I open the VUCC window, it is also apparent that confirmations
for CW and SSB are not showing as C.  Under Reports, Awards, VUCC tab, I
have all modes selected.  The same thing happens when I run a VUCC report
listing - confirmations for CW and SSB on 6 meters do not show up as
confirmed.

 

For example, for EM09 in Kansas, LOTW shows that grid was confirmed with
AB0S.  When I look up that QSO in DX4WIN, the Confirm LOTW box is set for Y
- so it is marked as confirmed in DX4WIN.  But in the VUCC window, EM09 only
shows a W in the CW and SSB boxes-there should be a C in the CW box.  If I
double click on the 6 at the top, all of my QSOs with EM09 on 6 meters are
shown, and AB0S clearly shows that it was confirmed via LOTW.

 

So why are these CW and SSB confirmations not showing up in the VUCC window
and on the VUCC reports?

 

73,

 

Dave

 

David Perry, N4QS

 

3600 Savoy Circle

Paducah, KY  42001

 

n...@vci.net  

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] VUCC totals not accurate

2022-07-29 Thread David Perry, N4QS 
After all these years, I am just starting to focus on VUCC and FFMA awards
for six meters.  For VUCC, my confirmed totals in DX4WIN are about 70 less
that my totals showing on LOTW.  (I have very few grids confirmed via QSL
card.)  When I open the VUCC window, it is also apparent that confirmations
for CW and SSB are not showing as C.  Under Reports, Awards, VUCC tab, I
have all modes selected.  The same thing happens when I run a VUCC report
listing - confirmations for CW and SSB on 6 meters do not show up as
confirmed.

 

For example, for EM09 in Kansas, LOTW shows that grid was confirmed with
AB0S.  When I look up that QSO in DX4WIN, the Confirm LOTW box is set for Y
- so it is marked as confirmed in DX4WIN.  But in the VUCC window, EM09 only
shows a W in the CW and SSB boxes-there should be a C in the CW box.  If I
double click on the 6 at the top, all of my QSOs with EM09 on 6 meters are
shown, and AB0S clearly shows that it was confirmed via LOTW.

 

So why are these CW and SSB confirmations not showing up in the VUCC window
and on the VUCC reports?

 

73,

 

Dave

 

David Perry, N4QS

 

3600 Savoy Circle

Paducah, KY  42001

 

n...@vci.net  

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] All my windows are off screen except for the main window.

2022-07-29 Thread David Gould 
I am in the middle of trying to get a second monitor working on new W10 
machine.   I have what seems to be a common (but not universal problem) 
for any windows open on the second monitor move to the first monitor 
when the screen wakes up from screen save mode. (OK when I minimize / 
maximise or close / open)   Does anyone have a fix for this on W10.   I 
understand W11 has fixed this problem.


Anyway while I have been trying various things, all my DX4Win windows 
went off screen. There was a tiny fragment of the main window showing, 
so I have managed to drag that window back into view.       Is there a 
way I can get all the other open windows back into view somewhere?


73,

Dave   G3UEG
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html