[Dx4win] Version 7.01 Released
Yes, Version 7.01 was released at Dayton this weekend. I picked up my new version at their table along with the new key file. The big item in this release is the integration of MMTTY into DX4WIN, along with PSK. For us folks that like to work RTTY this is a big hit. I cannot wait to get back home and try it out. 73 Alan, N5PA
[Dx4win] Print on Back of QSL Card
I want to print the label directly on the back of my 5 1/2w x 3 1/2t QSL cards. I would like to be able to print 8 to 10 QSO's on each card. How can I set it up in a custom label to do this. One thing is that it tries to print SSB contacts on one label and CW on another and I do not want to separate them. 73's Alan, N5PA
[Dx4win] RigBlaster interface
I have a RigBlaster interfaced to my PC on COM3 and can operate PSK31 fine using WinPsk. How do I configure DX4WIN for PSK31 and RTTY? Alan Clark N5PA / 7Q7PA 4025 Craft Lane Laurel, MS 39440-1268 USA Phone: 601-426-0090 E-Mail: [EMAIL PROTECTED] URL: http://mywebpages.comcast.net/n5pa/
[Dx4win] Cable Modem Timeout
The LinkSys will time out because of the firewall features in DMZ Hosting. If you change the router where your PC is outside the firewall in the LinkSys it will stay connected continuously. At that point I would strongly suggest that you have Norton Security or some other type of software firewall running on your PC. 73's Alan, N5PA
[Dx4win] Cable Modem Timeout
The LinkSys will time out because of the firewall features in DMZ Hosting. If you change the router where your PC is outside the firewall in the LinkSys it will stay connected continuously. At that point I would strongly suggest that you have Norton Security or some other type of software firewall running on your PC. I have the 8 Port LinkSys Router/Switch/Firewall and this is what I had to do to maintain connections. 73's Alan, N5PA
[Dx4win] Cable Modem Timeout
The LinkSys will time out because of the firewall features in DMZ Hosting. If you change the router where your PC is outside the firewall in the LinkSys it will stay connected continuously. At that point I would strongly suggest that you have Norton Security or some other type of software firewall running on your PC. I have the 8 Port LinkSys Router/Switch/Firewall and this is what I had to do to maintain connections. 73's Alan, N5PA
[Dx4win] Cable Modem Answer
I have a Linksys Cable Modem, Router/Switch and NIC. I have the Linksys Model BEFSR81, EtherFast® Cable/DSL Router with 8-Port Switch. The answer was to change the Linksys DMZ Host feature to place the PC outside the router's firewall. With the firewall you have three regions, inside, outside and DMZ. With the PC outside the firewall all works well, but you must rely on the firewall software on the PC. Thanks for all the input. 73's Alan Clark N5PA / 7Q7PA / C6ALG
[Dx4win] Telnet via Cable Modem Timeout
I have recently converted from a dial-up to an ISP to get my DX Spots to a Cable Modem. Since converting to the cable modem I notice that it times out and goes off line without any notification. All I notice is that I am not getting spots any more. Works fine when I dial up the ISP, but with the cable modem it times out. Any insight to a solution? Alan, N5PA
[Dx4win] Test
Test Alan, N5PA
