I just tried it with my K3 and all is working fine..guess I should have asked what the difference between the "K3" and the "K3 X4" settings were.
73's, Bill, AA7X -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w...@w5ov.com Sent: Tuesday, February 03, 2009 12:07 PM To: Bob Thompson - N9SF Cc: Larry Phipps; Robert Naumann; dx4win@mailman.qth.net Subject: Re: [Dx4win] 7.06 won't set split on K3 Thanks Bob. I was not using LP Bridge at the time, but I will keep this in mind when I do. I suspect that using the "K3 X4" rig definition may resolve it. I saw that, but I did not know what its purpose was so I did not try it. 73, Bob W5OV > This might might get it going for you. > > Download and install DX4WIN 7.07. > > Use the "Elecraft K3 X4" rig file that downloads with version 7.07. > > If you are using LP_Bridge, I have found that something gets out of > whack with it at times. When LP_Bridge gets off track, modes on VFO > B and split can be wrong after double clicking a DX spot. Restarting > LP_Bridge seems to correct the problem. > > I hope this helps. > > 73, > Bob - N9SF > > > > At 08:27 AM 2/3/2009, Robert Naumann wrote: >>I looked through the archives, and I did not see a response to Steve's >>question below. >> >>I am seeing exact same behavior on my K3 now too. Using 7.07.02. >> >>With split being turned off for no reason, it makes one a lid very >> quickly >>in a split pileup situation. >> >>Is there a resolution to this? >> >>73, >> >>Bob W5OV >> >>-----Original Message----- >>From: dx4win-boun...@mailman.qth.net >> [mailto:dx4win-boun...@mailman.qth.net] >>On Behalf Of inventor_sixty_one >>Sent: Monday, December 08, 2008 9:59 PM >>To: Dx4win@mailman.qth.net >>Subject: [Dx4win] 7.06 won't set split on K3 >> >>I wonder what I am doing wrong ... in either the manual 'set >>frequency' tool, or by selecting a DX spot that is set for split VFO >>mode, the 'split' indicator on the K3 is activated ... but does not >>stay in that mode. It just 'clicks' to split mode for a moment and >>then reverts to VFO A mode. >> >>manually going into split mode on the radio works fine. >> >>I have tried this at both 4800 and 38400 bps speeds, to see if that >>made any difference. None. >> >>Ideas? >> >>Steve KZ1X/4 >>_______________________________________________ >>Dx4win mailing list >>Dx4win@mailman.qth.net >>http://mailman.qth.net/mailman/listinfo/dx4win >> >>______________________________________________________________ >>Dx4win mailing list >>Home: http://mailman.qth.net/mailman/listinfo/dx4win >>Help: http://mailman.qth.net/mmfaq.htm >>Post: mailto:Dx4win@mailman.qth.net >> >>This list hosted by: http://www.qsl.net >>Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
