[Dx4win] labels and Lines
Hi dx4win'ers, Is there a way to disable the outside lines on a label in version 9 when you print? I know about the lines around the qso data. 73 Marc ON4MA -- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] lost my bandmap
I lost my bandmap window . Probely a silly question but did not find it in the helpfile. 73 Marc ON4MA DX4win9.04 --- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] dx4win and TS990
Is it possible to connect TS990 via USB for radio controlling in Dx4win? I installed driver from Kenwood site as COM3. I have change in radio USB to 9600 baud and dx4win also. But software is hanging. Marc ON4MA --- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] I'm scare to start with Version 8
Hi folks I'm scare to switch over to version 8. I have the new key but i see in my mailbox more than 300msg to read about '' dx4win ver 8.0. Is it working ? marc ON4MA --- avast! Antivirus: Uitgaande bericht is onbesmet. Virus Gegevensbestand (VPS): 090812-0, 12/08/2009 Getest op: 13/08/2009 0:14:52 avast! - auteursrecht (c) 1988-2009 ALWIL Software. http://www.avast.com __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] FT1000MP Polling
Bob, It is working from the earlier versions with my 13 years old ft1000mp. Adress 00 baudrate 4800 defaults are ON Poll rate 5000 max tries 6 dtr HIGH Marc ON4MA - Original Message - From: Bob Stewart rstew...@paradise.net.nz To: DX4WIN Reflector dx4win@mailman.qth.net Sent: Monday, August 10, 2009 12:46 PM Subject: [Dx4win] FT1000MP Polling Hi All, I like the new version 8. In exploring its features I discover that neither Ver 8 or Ver 7 that I have will poll my FT1000MP. Both versions read and control the radio on command from DX4WIN but the 'cat' indicator does not blink as it does when I use Writelog. Problem being that DX4WIN does not know when the radio bands/modes etc change. I have tried various 'radio' settings but still no polling. I have looked at the device manager and all looks normal and windows reports the com port as OK. What have I not done? Bob ZL2AMI/ZM2A __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html --- avast! Antivirus: Inkomende bericht is onbesmet. Virus Gegevensbestand (VPS): 090809-0, 09/08/2009 Getest op: 10/08/2009 12:49:43 avast! - auteursrecht (c) 1988-2009 ALWIL Software. http://www.avast.com --- avast! Antivirus: Uitgaande bericht is onbesmet. Virus Gegevensbestand (VPS): 090809-0, 09/08/2009 Getest op: 10/08/2009 12:56:06 avast! - auteursrecht (c) 1988-2009 ALWIL Software. http://www.avast.com __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Running Dx4win in Vista
No problem you have to run it under administrator priveleges marc on4ma - Original Message - From: KD3TB idar...@gmail.com To: dx4win@mailman.qth.net Sent: Wednesday, April 29, 2009 6:02 PM Subject: [Dx4win] Running Dx4win in Vista I plan on upgrading my radio shack computer very soon. Since it's almost impossible to get a computer running XP today, does Dx4Win run in Vista? Thanks and regards, Irwin KD3TB Irwin Darack 2002 Country Club Drive Doylestown, PA 18901 and 37504 River Birch Lane Ocean View,DE 19970 idar...@gmail.com Cell Phone: 1-267-261-4959 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.287 / Virus Database: 270.12.8/2086 - Release Date: 04/29/09 06:37:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Window for Talk .... ?
There is a window for this go to preferences /packet 1/ warning messages / select Beep -show window custome a filter for this in packet 2 / warning patterns . see also AD1C website marc ON4MA - Original Message - From: Andy-UA0BA [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Sunday, November 30, 2008 1:05 AM Subject: [Dx4win] Window for Talk ? Hello to ALL ! Am sorry my poor english ! Why there is no separate window for Talk messages and announcements ? Andy - UA0BA [EMAIL PROTECTED] ICQ: 11727506 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.9.11/1820 - Release Date: 29/11/2008 18:52 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] [Fwd: CAT and RTTY]
Paul you could change the radio file .This is already somewhere in the archives how to do it .. simply edit the radio file (make first a backup or change the name) look for this [MODES] AM=3;4,5;N CW=2;2,3;N FM=4;6,7;N PACK=6;10,11;N RTTY=5;8,9;N SSB=0,1;0,1;N change PACK to RTTY and i think it will work ! marc on4ma - Original Message - From: F6EXV [EMAIL PROTECTED] To: DX4WIN Reflector dx4win@mailman.qth.net Sent: Monday, September 03, 2007 10:44 AM Subject: [Dx4win] [Fwd: CAT and RTTY] Still no reply to that... Any help please ? Original Message Subject: CAT and RTTY Date: Fri, 31 Aug 2007 13:43:54 +0200 From: F6EXV [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: dx4win@mailman.qth.net Hi all ! I just plugged a CAT cable to my computer, and it seems to work fine, except that I operate my FT1000MP Mk V in RTTY using the packet connections. The QSO is really RTTY but it shows PKT (which is a correct reading, but wrong info !). Is this solved on the Yaesu, or through DX4Win ? I use version 7.01, and Windows2000 XP. Thanks in advance for enlightning me ! 73 Paul F6EXV ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Talk Window in 7.02
John, look at http://dx4win.ad1c.us/appnotes/index.htm scroll down and you see some tips to use the talk-window with your callsign. While upgrading to 7.02 you forgot the ini file merging from your last version. Marc on4ma - Original Message - From: John Desmond [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, February 27, 2007 6:06 AM Subject: [Dx4win] Talk Window in 7.02 Since I upgraded to 7.02 (some time ago) I have lost my talk window and cannot find any info in the help file as to where to turn that back on. Any clues out there? Also, is it possible to filter to that you only see Talk one liners addressed to yourself? Thanks es 73, John K0TG ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.4/703 - Release Date: 26/02/2007 14:56
[Dx4win] USB ports - Root Hub and DX4WIN sluggishness
That exact what I see also here with my winkeyer USB unit.When polling my radio dx4win is acting slow and the cw is also broken.I give one USB keyer to a Guy ON4AOI to see how its work with his system. Marc ON4MA - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: dx4win@mailman.qth.net Cc: [EMAIL PROTECTED] Sent: Saturday, February 24, 2007 12:30 PM Subject: [Dx4win] USB ports - Root Hub and DX4WIN sluggishness I made a rather interesting and fortuitous discovery this morning. I had been reading the microHAM reflector about USB Root Hubs: http://groups.yahoo.com/group/microHAM/message/4212 (you will need to be subscribed to the microHAM group to see the message). I discovered that my microKEYER was indeed connected to a root hub, but was sharing the port with a USB print driver. But that's not the most interesting part! Some time ago, I had installed a PCI to USB 2.0 adapter because the 4 USB ports on the back of my Dell Dimension E310 were not enough (mouse, keyboard, label printer, microKEYER, UPS, wireless network). The microKEYER was plugged into one of the USB ports on the PCI adapter. I noticed that I did have one free USB port on the PC (native to the motherboard) so I moved the microKEYER to that port. Now when I checked the Windows XP Device Manager, I found that the microKEYER was all by itself (no sharing). But I also found that DX4WIN was now MUCH responsive to logging QSOs. Often times, I had to wait 1 or more seconds for DX4WIN to catch up with polling the radio, the computer would essentially freeze. That problem seems to have completely disappeared! I will have to watch for a few days to see if the random frequency corruption problem is also gone (DX4WIN would occasionally log a frequency that was 100x higher than it should be, i.e. 1,807,708 KHz instead of 18,077 KHz). So if you are having problems with DX4WIN and microKEYER, check whether the keyer is connected to a USB root hub, is all by itself on that hub, and whether it's plugged into a port directly attached to the motherboard. I can't believe I've been suffering from this problem for so long, when the fix was so simple! Thanks to Joe W4TV and Craig K4IA for making me aware of this issue. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.3/699 - Release Date: 23/02/2007 13:26
[Dx4win] winkey2 support
works ok here (winkey usb ) com5 with dx4win 7.02.15 marc on4ma - Original Message - From: Mark [EMAIL PROTECTED] To: DX4WIN List Server DX4WIN@mailman.qth.net Sent: Monday, January 22, 2007 9:32 PM Subject: [Dx4win] winkey2 support I've had some problems with using my new WINKEY2 (USB) with DX4WIN. (works ok with the WINKEYER2) Would like to hear from someone who has been successful in using this. (and if it's possible to key alternate rigs using it within DX4WIN) Mark n2qt ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.17.5/645 - Release Date: 22/01/2007 16:10
[Dx4win] WinKeyer USB with DX4WIN
i use winkey usb version and it works ok with version 7.02.15 the older rs232 works also. marc on4ma - Original Message - From: Dave Hawes [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, December 24, 2006 2:51 PM Subject: [Dx4win] WinKeyer USB with DX4WIN I'm a satisfied 6.04 user, but pondering upgrading to acquire WinKey support. I have a K1EL WinKeyer USB that I use in standalone mode, as well as during contests with N1MM Logger. It would be convenient to be able to use the WK-USB for everyday DXing under DX4WIN control. I would NOT want to have to plug/unplug cables to make the switch from DX4WIN to N1MM to DX4WIN. Can anyone confirm that this is possible. (The archives indicate that DX4WIN will interface with the various microHAM boxes via USB, but there was nothing definitive with respect to a K1EL WinKeyer USB.) 73 - Dave N3RD ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.26/600 - Release Date: 23/12/2006 16:47
[Dx4win] DX4WIN and microHAM MK2R+
Franki, time to update to dw4win 7 .winkey is supported .You have still 7 days left to have the registation key under the christmas tree from your lady ;---) OH OH OH ..happy christmas guy 's and lady's Marc on4ma - Original Message - From: Franki ON5ZO [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, December 24, 2006 10:26 AM Subject: Re: [Dx4win] DX4WIN and microHAM MK2R+ It supposed that mk2r+ makes our life easier, isn't it? Any opinions from users? I have the MK2R+ and I'm very happy with it. It works under DX4WIN, although I quit using DX4WIN (no more satisfaction for various reasons). I use N1MMLogger (with MMTTY for RTTY) and import the ADIFs in DX4WIN for award tracking and QSLing. I made a fully working preset for N1MMLogger and stripped it down for DX4WIN. Everything works (but I don't use it hi). I refuse to migrate to V7 so still using V6 so I can't tell for native Winkey support and RTTY but since MMTTY works under N1MMLogger, it should work in DX4WIN. No worries for the MK2R+, it is a very good SO2R / USB device. 73 de Franki ON5ZO / OQ5M ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.26/600 - Release Date: 23/12/2006 16:47
[Dx4win] DX4WIN + TS-850 + RIGBlaster + CW
I'm finding it al in the help file setting preferences/preferences CW . to hookup a CW interface via com. setting/preferences preferences/RADIO to hookup a radio and finaly ALT+K to have the keyboard menu coming up in dx4win ! You dont do the impossible but you have to read a little more the manual on4ma marc - Original Message - From: Ed Douglass, AA9OZ [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, December 04, 2006 2:42 AM Subject: [Dx4win] DX4WIN + TS-850 + RIGBlaster + CW I am having an unsucessful time trying to get DX4WIN to: + read my Kenwood TS-850 into the DX4WIN logging program, and + send CW from the computer keyboard with a RigBlaster Plus hooked up to the 850 and the computer sound card. I have a W1GEE interface and three serial ports available on the computer (COM 1, and a NetMos dual serial port PCI card as COM 4 and 5) Neither the DX4WIN User Manual or the Help menu seem to address how to hook up and configure this combination of equipment. Am I trying to do the impossible? Help, please. de Ed, AA9OZ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.430 / Virus Database: 268.15.6/566 - Release Date: 3/12/2006 16:36
[Dx4win] ORION Rig file - OK7GU modification
Hi Milan, How is this different from the file that comes with DX4WIN? 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ This file when clicking on a cw spot place the radio in UCW and do not change the bandwith.The one with dx4win change to LCW and bw 1000Hz. Rtty is also in. Marc on4ma
[Dx4win] Where is the Tech Support?
Howdy Guy's This is how dx4win works. When you are real time logging and from the moment you hit f9 with radio on .When a spot is coming it changed a few seconds to that spot mode and band while checking your log to see you need it or not !Nothing happens with the radio and after 2 seconds (probely longer or shorter with a slower/faster pc) the radio freq and mode is displayed.Now it is coming From the moment you type in the callsignfield , the spots who flow in are not changing the radio freq and mode in the log window because you are in real mode logging.From the moment you log a station (ENTER) it all start over. What I see with my orion's there is some delay.Respons is delayed probely some data is lost from te radio(polling) I never had this with my ft1000mp's ;-)) Marc ON4MA - Original Message - From: n4dsp [EMAIL PROTECTED] To: KR4DA [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Sunday, November 12, 2006 6:30 PM Subject: Re: [Dx4win] Where is the Tech Support? Bob, with the radio OFF and the dx4win packet cluster running, the spots band and mode will show up in the band and mode in the QSO Window and will stay there until another new spot. That is normal and that is not the problem. When I turn the radio ON and hit F9 for real time, whatever band and mode the radio shows that is what the band and mode will show in the QSO windows band and mode; HOWEVER, when a spot arrives from the packet cluster the band and mode in the qso window will change to that spots band and mode. My radio's band and mode does not change to the spots band and mode. Does that help? Anyone out there have this problem running dx4win and the Orion II? Three weeks and counting with this issue. 73 john-n4dsp - Original Message - From: KR4DA [EMAIL PROTECTED] To: dx4win@mailman.qth.net Cc: n4dsp [EMAIL PROTECTED] Sent: Sunday, November 12, 2006 12:42 PM Subject: Re: [Dx4win] Where is the Tech Support? Hi John, There is ..as I am not in front of the program with this computer... I believe settings in the perferances that set what freqs are CW, SSB, RTTY ranges..and then are the default ones... Let me ask you to try this... real time MODE and the RADIO OFF. Do the settings (modes etc)when clicked in the PACKETT window set(populate) corrctly in the LOGGING window?? So this only happens when the RADIO is on... Am I understanding that the RADIO never SET it's VFO to the CLICKED freq??? SO concurrently DX4WIN then sets the RADIO freq as now being READ. I hope someone else will chime in and help you out, n4dsp wrote: Bob, I have the packet cluster running in dx4win. Now I am also entering info in Real Time. I am on 20 cw and making qso's but when there is a spot on the packet cluster lets say on 40 mtr ssb, the band and mode in my qso window will change to 40 mtr ssb for a second or two then will go back to 20 mtr cw, the band and mode MY Orion is on. This should not do that in Real Time. The qso window should only show the band and mode the Orion II is on not what the packet cluster spot shows. I have sent 6 emails to [EMAIL PROTECTED] for 3 weeks now but have received no answer and it is very frustrating. So now you know the rest of the story! Hope this helps. Thanks for taking the time out with the email. 73 Bob john-n4dsp - Original Message - From: KR4DA [EMAIL PROTECTED] To: n4dsp [EMAIL PROTECTED] Sent: Saturday, November 11, 2006 1:24 PM Subject: Re: [Dx4win] Where is the Tech Support? Well ole man... many as well as me are going to tell you the program works great Is this a problem with your RIG and DX4WIN??? Alot of great guys here.. go ahead and let us, them try and help n4dsp wrote: I have had a problem with dx4win for three weeks. Emails have been sent to Paul with no acknowledgement of received emails. Why is this? My program is not working correctly and I have tried to keep this out of the public eye but three weeks? Where is the Tech Support? Bands and Modes are being incorrectly logged with version 7.02. I am finding these errors in my logbook. This has been passed onto Paul but still no comment. Has his email address changed? Is he out of the country? Where in the world is Paul Evander. Help Paul! At least say HI. This problem cannot be addressed on this reflector. There is a glitch in the program itself. john-n4dsp --- --- I would rather have a German division in front of me than a French one behind me. --General George S. Patton ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- de KR4DA Bob Middleburg, FL HK0/KR4DA J79DA FG/KR4DA
[Dx4win] Swains Isl.
thanks. Now i have work to check my DXCC lost some confirmed and on others bands have some more ?? marc on4ma - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: marc wullaert [EMAIL PROTECTED]; DX4WIN List dx4win@mailman.qth.net Sent: Saturday, July 29, 2006 8:03 PM Subject: Re: [Dx4win] Swains Isl. At 02:15 AM 7/29/2006, marc wullaert wrote: do's someone have the cordinates for swains island dxcc 337 ? DX4WIN.CTY #32 already has this info: http://dx4win.ad1c.us/ 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.5/403 - Release Date: 28/07/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.5/403 - Release Date: 28/07/2006
[Dx4win] ADIF Import question
scott look at http://mailman.qth.net/pipermail/dx4win/2005-March/006294.html thats the way I do it.Thakes a little bit time for tho change the adif log .If you need some help about the word '' brol '' let me know ;-)) marc on4ma - Original Message - From: Scott Neader KA9FOX [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, June 13, 2006 4:43 AM Subject: [Dx4win] ADIF Import question Maybe this has been asked a 100 times before, but I can't find it... my apologies if this is a dupe... I am trying to import contest logs into DX4WIN, using the ADIF format. I want the name of the contest imported, to be displayed as a Notes For This QSO. The ADIF file has the name of the contest listed with the standard field name CONTEST_ID but I can't get DX4WIN to do anything with this field... it seems to ignores this field, and instead creates its own COMMENT field by taking the frequency of the QSO and the QSO Number and putting that in the Notes For This QSO field. I've been able to circumvent this, sort of, by manually editing the ADIF file and changing the CONTEST_ID field name to COMMENT. DX4WIN then DOES bring in the Contest Name into the Notes For This QSO field, and then appends the Frequency (I really don't want this -- who cares?) and the QSO number (this is OK)... making a big Notes field of Contest Name + Frequency + QSO Number -- but it fits. Is there a better way? - Scott KA9FOX ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 12/06/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.8.4/363 - Release Date: 13/06/2006
[Dx4win] Winkey
Maybe you could ask your question to Paul or Steve ! sure i love to see it was supported in dx4win.I'm still waiting to upgrade from 6.04 !! - Original Message - From: Paul Pescitelli [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Saturday, April 22, 2006 11:11 PM Subject: [Dx4win] Winkey Greetings, I am new to the list and sure that this topic has come up before.. Has anyone gotten the K1EL winkeyer to work with DX4WIN, or know of a plan to support it.. I have not been able to make it work yet... -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.4.5/322 - Release Date: 22/04/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.4.5/322 - Release Date: 22/04/2006
[Dx4win] Using DX4WIN with TRX-Manager
Why use another software when it is avaible in Dx4win ? marc on4ma - Original Message - From: Peter Bacon [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Wednesday, April 05, 2006 9:20 AM Subject: [Dx4win] Using DX4WIN with TRX-Manager Does anyone know if it is possible to get DX4WIN to work with TRX-Manager to exchange frequency information? And if so, how? I would like to use TRX-Manager to control my rig and pass through the necessary frequency mode information to DX4WIN for the logging. Please let me know if anyone has this successfully setup. 73 Peter ___ Peter Bacon www.g3zss.co.uk www.oceanfone.com -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.3.5/301 - Release Date: 04/04/2006 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.3.5/301 - Release Date: 4/04/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.3.5/301 - Release Date: 4/04/2006
[Dx4win] Homepage from AD1C
it is working here ok ot4t - Original Message - From: Klaus D. Behrndt [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Saturday, April 01, 2006 11:21 AM Subject: [Dx4win] Homepage from AD1C Hi, its impossible for me to reach Jims homepage www.ad1c.us. Are there others especially from Europe having this problem? I am using Windows XP and Mozilla Firefox. 73 Klaus, DJ4SO ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.3.4/299 - Release Date: 31/03/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.3.4/299 - Release Date: 31/03/2006
[Dx4win] new callsign
Do I have to pay for a registartion key when you change your callsign ? Belgium's can now ask for a vanity callsign 2x1. Marc ON4MA - OT4T -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.2.6/288 - Release Date: 22/03/2006
[Dx4win] DX4WIN 7 and M2 RC2800PX
I thaugt this whas already in the archive's of dx4win.The later version of the rc2800px is not working whit dx4win ..something to do with the change of firmware ! on4ma - Original Message - From: Martin H. Green [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, March 21, 2006 3:04 AM Subject: [Dx4win] DX4WIN 7 and M2 RC2800PX I have dx4win 7.01 and an M2 RC2800PX rotator controller. The controller does not respond to control commands from dx4win BUT it responds perfectly via the Windows XP telnet client Hyperterm. Does anyone know what the problem is? Marty, N1HT ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.2.6/286 - Release Date: 20/03/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.2.6/287 - Release Date: 21/03/2006
[Dx4win] What does Winkey do?
It transforms ascii to dit dit -dit dah.Where most CW software apllications strugles with high cpu use on a lpt port it controlls the keyer on a comport. And it is cheaper like other external keyers where the most options like memorys are not used. The new device like microhamkeyer controls it via USB 2. season greathings Marc ON4MA - Original Message - From: John Shaw [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, December 20, 2005 12:52 AM Subject: [Dx4win] What does Winkey do? Ok, winkey this and winkey that. Maybe someone has been slipping me thick pills again. I looked at the winkey site and they do the same yada yada yada about winkey but they don't actually say what extra functionality it gives. So what tricks does this thing do that makes it a must have item? 73 John. PS. Sorry Bruce ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.371 / Virus Database: 267.14.1/207 - Release Date: 19/12/2005
[Dx4win] Re: WinKey dx4Win
There are small programs avaible at k1el.com to run the winkey. I hope also that Winkey will be supprted soon in DX4WIN so I can update my dx4win6.04 version.But no response from the programmers. Season Greatings marc ON4MA - Original Message - From: Goran Lundell [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, December 18, 2005 8:37 PM Subject: [Dx4win] Re: WinKey dx4Win I agree. The Winkey is very good. I miss it in Dx4Win. I now use the freeware SD-contest program from EI5DI where I can use the Winkey and then log it in Dx4win. That is a little awkward. 73 Goran/SM0CMH ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.371 / Virus Database: 267.14.1/206 - Release Date: 16/12/2005
[Dx4win] Importing WriteLog file
I think in writelog you can export adif file .Those file can be imported in dx4win. marc on4ma - Original Message - From: Darryl Hazelgren [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, November 14, 2005 3:20 PM Subject: [Dx4win] Importing WriteLog file Hello Everyone. I would like to import my contest log for Nov CW Sweepstakes into my DX4WIN (6.02) log. Have done it from TR for years. Just changed to WriteLog 10.55. It dosen't recognize the cabrillo file I submitted as a file it can directly import. What is the best method to get this log imported? Thanks in advance. Darryl Hazelgren, K7UT President, Utah DX Association www.UDXA.org ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005
[Dx4win] still using Ver6.04
if you push F8 the logwindow will be empty.Now you can check qso's on every empty field let's say :you wanna see all qso's with a KL7 . in prefix fill in KL7 and enter now look in your logbook window : all qso with kl7 will be there.you wanna see als qso with KL7 buth only on band 160m ... prefix = KL7 , band = 160M all qso's on 160m with KL7 will be there You can do it with every field ...you can even export them that way !! marc on4ma - Original Message - From: Peter Solly [EMAIL PROTECTED] To: [EMAIL PROTECTED] Qth. Net dx4win@mailman.qth.net Sent: Monday, November 14, 2005 2:21 PM Subject: [Dx4win] still using Ver6.04 Does the F8 search feature work with ver. 6.04? If so how is it activated? Thanks de VE3AD. ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005
[Dx4win] Rig control DX4Win Ver7.01
copy the file from version 6.04 dx4win6/radios/ xx to your new dx4win7/radios folder and see what is happening with the radio probely the files is screwed or you did find a bug in version 7. on4ma marc - Original Message - From: Andy Hewitt [EMAIL PROTECTED] To: [EMAIL PROTECTED] Qth. Net dx4win@mailman.qth.net Sent: Saturday, November 12, 2005 2:39 PM Subject: FW: [Dx4win] Rig control DX4Win Ver7.01 Roger K9RB, Many thanks for your help.I have copied and pasted the file you sent into the radios folder and it works but almost the same as using the TS850/950 file that was in there originally. It does now change the mode to that of a spot but does nothing with the frquency. HI ALL! is there anyone out there that has a solution! The strange part about this is that using version 6.04 it worked FB. 73 Andy G3SVD -Original Message- From: Roger Borowski [mailto:[EMAIL PROTECTED] Sent: Saturday, November 12, 2005 2:37 AM To: Andy Hewitt Subject: Re: [Dx4win] Rig control DX4Win Ver7.01 Andy, They've had various versions of DX4WIN which have really bloodied up the TS-950SDX operation. I found one and stuck with it. Just add it to your C:\ Program Files | DX4W701 | Radios directory and then go to Preferences and choose it as your rig file. It will work well for you but even it is not perfect, but as close to perfect for the 950 SDX as you'll find. I've attached a copy of mine. Good Luck and have fun. 73, Rog-K9RB If you find one that works better, I'd be interested in giving it a try. The author of DX4WIN, Paul, doesn't even answer my e-mail's and I've been asking for this fix as well as a couple other bugs for two years but it falls on deaf ears. I think he really doesn't care! - Original Message - From: Andy Hewitt [EMAIL PROTECTED] To: [EMAIL PROTECTED] Qth. Net dx4win@mailman.qth.net Sent: Friday, November 11, 2005 5:10 PM Subject: [Dx4win] Rig control DX4Win Ver7.01 GE all, I could do with a little help. Recently I upgraded from 6.04 to 7.01, now when I want to qsy to a spot and click on the station in the spot window the only thing that happens is that the rig changes to cw mode whether or not the spot is cw. The program shows the change of band and mode correctly if I change mode or band on the rig. My main rig (with the problem) is a Kenwood TS950SDX. I also have a second rig a TS570 which works fine spots can be transferred to the rig, including the qsx if applicable. The 950 worked fine previously with versions 6.04 and earlier, and does work OK with my contest logging programs (SD Contest! by G4FON). Any ideas please. 73 Andy G3SVD ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005
[Dx4win] Announcement Screen
file/preferences/ packet1 /warning messages on4ma 73 - Original Message - From: n3drk [EMAIL PROTECTED] To: dx4win dx4win@mailman.qth.net Sent: Tuesday, November 08, 2005 1:13 AM Subject: [Dx4win] Announcement Screen Where in the program can I prevent the Announcement Screen from coming up on every post? 73s john ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date: 5/11/2005
[Dx4win] WinKey with USB ...
This keyer is not supported by DX4WIN why advertise here ? Marc on4ma - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, September 01, 2005 10:24 PM Subject: [Dx4win] WinKey with USB ... The new microHAM CW Keyer is now shipping. I have been told that the initial batch left Slovakia for the US yesterday. Additional units should follow on a regular basis. What is the microHAM CW Keyer? For full details see: www.microham-usa.com/Products/ck.html In short: CW KEYER is a powerful USB CW interface/memory keyer based on the K1EL WinKey chip and microKEYER technology. CW Keyer provides the CW features of the original microKEYER and a USB radio control (CAT) interface in a small, readily portable package for those with who do not need the audio handling of microKEYER. CW KEYERT uses a single USB port and is directly supported by many logging and contest programs for both radio control and CW transmission. CW KEYER also supports a PS/2 keyboard for keyboard sent CW and control of the memory functions or a PS/2 keypad for message control only. The keyboard or keypad function even when CW KEYER is connected to a computer. The user can program up to nine extra messages into CW Keyer and use the keypad to send them as needed even if the keyer is under control of an application program (logger, contest logger, etc.). CW Keyer has two RCA outputs on the rear panel ... although they are labeled CW and PTT the outputs are driven by Pin3 and Pin5 of the WinKey chip and can be used to key two different radios if supported by the controlling application. Alternatively, the CW and PTT outputs can be used as inputs to a traditional switch box. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.18/87 - Release Date: 1/09/2005 From [EMAIL PROTECTED] Fri Sep 2 06:56:51 2005 From: [EMAIL PROTECTED] (ON4AOI) Date: Fri Sep 2 07:01:51 2005 Subject: [Dx4win] WinKey with USB ... In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] This keyer is not supported by DX4WIN why advertise here ? Marc on4ma What's not is can be in the future Marc 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, September 01, 2005 10:24 PM Subject: [Dx4win] WinKey with USB ... The new microHAM CW Keyer is now shipping. I have been told that the initial batch left Slovakia for the US yesterday. Additional units should follow on a regular basis. What is the microHAM CW Keyer? For full details see: www.microham-usa.com/Products/ck.html In short: CW KEYER is a powerful USB CW interface/memory keyer based on the K1EL WinKey chip and microKEYER technology. CW Keyer provides the CW features of the original microKEYER and a USB radio control (CAT) interface in a small, readily portable package for those with who do not need the audio handling of microKEYER. CW KEYERT uses a single USB port and is directly supported by many logging and contest programs for both radio control and CW transmission. CW KEYER also supports a PS/2 keyboard for keyboard sent CW and control of the memory functions or a PS/2 keypad for message control only. The keyboard or keypad function even when CW KEYER is connected to a computer. The user can program up to nine extra messages into CW Keyer and use the keypad to send them as needed even if the keyer is under control of an application program (logger, contest logger, etc.). CW Keyer has two RCA outputs on the rear panel ... although they are labeled CW and PTT the outputs are driven by Pin3 and Pin5 of the WinKey chip and can be used to key two different radios if supported by the controlling application. Alternatively, the CW and PTT outputs can be used as inputs to a traditional switch box. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database:
[Dx4win] Adding message to Notes for this QSO slot (DX4WIN 7.01)
ron, if you look in the dxwin archieve ,you find the solution if you import from adif file on4ma marc - Original Message - From: Ron Philip [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, July 11, 2005 2:46 AM Subject: [Dx4win] Adding message to Notes for this QSO slot (DX4WIN 7.01) I just completed working the IARU Contest. Is there a simple way to add a comment in the above slot to indicate the QSO was for the IARU Contest? Many thanks 73 de Ron VE7NS ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.8.11/45 - Release Date: 9/07/2005
[Dx4win] Wait for upgrade
Hi I'm still waiting to upgrade to 7.01.I see comments of bugs in the new version. But I don see any reaction for bugs from the programmer to the group! Have to wait another year or 2 for a new upgrade and pay again ? Look at N1MM contest software.Free and if a bug is found they try to have a fix very quickly. I have now Winkey (ASCII CW KEYER) for my rigs but asked to import in dx4win but got not even a reaction. I like Dx4win but a quicker response from the programmer to the reflector would that be nice and also a good advertisement for this program ! Marc on4ma
[Dx4win] New DX spider node: dxc.ad1c.us
I have setup my DXC program but found out I needed the portnumber (7300) to use it ! A lot off belgiums hams are using this software ,I just let them know how to do it ! Marc ON4MA - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Friday, June 17, 2005 8:23 PM Subject: [Dx4win] New DX spider node: dxc.ad1c.us I am ready to open my new DX Spider node to the public: telnet://dxc.ad1c.us Hello, this is AD1C in North Chelmsford, MA running DXSpider V1.51 build 59.374 There is no spot filtering - the node gets all the same spots that W1NR gets. Let me know if anyone has problems using it, or if any features are missing. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.7.8/22 - Release Date: 17/06/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.7.8/22 - Release Date: 17/06/2005
[Dx4win] databases greyed out
preferences/personal/userlevel ..check it - Original Message - From: Egbert Hertsen [EMAIL PROTECTED] To: DX4WIN dx4win@mailman.qth.net Sent: Monday, May 30, 2005 6:07 PM Subject: [Dx4win] databases greyed out Hi ! I just upgraded to version 7.01 for which I received my licence key. After going through the usual upgrade setup I'm puzzled to see some of the databases greyed out in the database menu: countries, IOTA, QSL Managers Radios are greyed out, the others are OK. Am I doing something wrong ? 73, Egbert ON4CAS ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.322 / Virus Database: 267.3.3 - Release Date: 31/05/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.322 / Virus Database: 267.3.3 - Release Date: 31/05/2005
[Dx4win] Version 7.01?
Small adjustments for the determination of a prefix and using the information from a previous QSO. Hope this stands for the usa states bug ? No winkey support ? marc on4ma -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.322 / Virus Database: 266.11.15 - Release Date: 22/05/2005
[Dx4win] Version 7.01?
I reported and other also about the states bug but got no response. example if you have K1ZM in your log and his states is MA if you work K1ZMA he will not clear the states flag will keep MA or you have to manually change it !Not diffucult but when running a pile up whit a special pfx on4ma i have the EZmaster now and would be nice if you encourage Paul to support Winkey ! - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: Marc Wullaert (ON4MA) [EMAIL PROTECTED]; DX4WIN Reflector dx4win@mailman.qth.net Sent: Monday, May 23, 2005 2:53 PM Subject: Re: [Dx4win] Version 7.01? At 08:49 AM 5/23/2005, Marc Wullaert (ON4MA) wrote: Small adjustments for the determination of a prefix and using the information from a previous QSO. Hope this stands for the usa states bug ? Which bug is this? The bug Paul fixed was if you had logged a station like KP2A in USVI, then that station moved to USA (and was in the callsign exception file), the next time you logged KP2A, the country would be correct (W) but the zone would be incorrect (8). If there is a different bug, please let us know how to duplicate the problem. No winkey support ? Not this time. However, I have the MicroHam interface now (not set up - yet) and hope to encourage Paul to support Winkey. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.322 / Virus Database: 266.11.15 - Release Date: 22/05/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.322 / Virus Database: 266.11.15 - Release Date: 22/05/2005
[Dx4win] Notes For This Call Oddities
this is not a dx4win isue ..but more a operater error. I have lots of contest qso cards where time's are off 7 hours.Even I have some where contest is on monday evening !! Check your adifs files or CT files before doing a save ! Maybe whe have to write a book '' Dx4win for Dummies marc on4ma - Original Message - From: Rick Tavan N6XI [EMAIL PROTECTED] To: Dick Flanagan [EMAIL PROTECTED] Cc: DX4WIN Reflector dx4win@mailman.qth.net Sent: Saturday, May 14, 2005 11:01 PM Subject: Re: [Dx4win] Notes For This Call Oddities I wish I could help you, Dick. I have the same problem. Most of the 35K QSOs in my DX4Win database are imports from CT, TR and Writelog contest logs. For CT and TR I use logconvert to convert to ADIF. For Writelog I used its own ADIF generation function. Then I import the ADIF using DX4W. Most of the resulting records have loads of extraneous info in the Notes for This Call field. Much of it never appeared in any field of the original logs. It must be coming from some kind of global database that DX4Win sucks in without provocation. I've asked before on this reflector but never received a coherent response. Since all I use DX4Win for is replying to received QSLs, it works for me. But it seems to be useless as a general logger because of all this random garbage it keeps jamming in that field. I wanted to use it as my daily logger but I've fallen back to Writelog for that. 73, /Rick N6XI On 5/9/05, Dick Flanagan [EMAIL PROTECTED] wrote: DX4WIN 6.04: I have recently noted that some of my Notes For This Call fields are being modified without any input from me. For example, on one QSO I put the Op's name in the field and somehow Juan has now become Juan/Juan. If that isn't interesting enough, I have three QSOs from one particular station where the Notes For This Call field now contains Yul/Yul/Yul/Yul. (I guarantee you that I only entered the first Yul.) Some DX4WIN operation is causing this and I would like to locate it before these fields start to look really ugly. Any ideas? 73, Dick -- Dick Flanagan K7VC NV SM E-mail: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- Rick Tavan N6XI PO Box 10270 Truckee, CA 96162-0270 530 587 3164 Truckee 408 896 0476 Cell 408 867 5797 Saratoga 650 846 5214 Voice Mail ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.10 - Release Date: 13/05/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.10 - Release Date: 13/05/2005
[Dx4win] Notes For This Call Oddities
probely you did import your qso again.check the other qso box to see you dont have dupes for those qso's !! marc on4ma - Original Message - From: Dick Flanagan [EMAIL PROTECTED] To: DX4WIN Reflector dx4win@mailman.qth.net Sent: Monday, May 09, 2005 10:18 AM Subject: Re: [Dx4win] Notes For This Call Oddities At 01:10 AM 5/9/2005, I wrote: DX4WIN 6.04: I have recently noted that some of my Notes For This Call fields are being modified without any input from me. I just did some more checking and found that ALL of my Notes For This Call entries have been duplicated. I don't relish having to hand-fix a thousand or more entries, but I sure would like to ensure that it doesn't happen any more. Help! 73, Dick -- Dick Flanagan K7VC NV SM E-mail: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 6/05/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 6/05/2005
Fw: [Dx4win] dx4win -WINKEY
I sended this mail some 2 weeks ago but got no respons! Wintertime is over ,whe are moving to the springtime, any response please from Steve or Paul ? Marc on4ma To Paul and programmers I just finished my Winkey CW keyer.Could it be imported into the next version of dx4win ? I now use QD keyer by G3VGR.Works OK just the PTT timing is a little bit long when the first dit or dot is sended ! -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 6/05/2005
[Dx4win] labelprinter
Do you have the printer installed under xp? on4ma - Original Message - From: Harald Kj?de [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, May 08, 2005 6:47 PM Subject: [Dx4win] labelprinter After upgrading from windows 98 to XP I`m unable to print anything at all, I`m using dx4win 4.04 , im pretty dependent of printing labels for my QSL cards which I can't at the moment, it seems that dx4win is unable to remember printer selections and chooses the wrong printer unit.. even if the label printer is selected. My question is have anyone experienced this, should I reinstall 4.04 (i dont have the installer... so if its downloadable anywhere i would appriciate that... I do have a valid license for it) , or should i upgrade to the newest version?!. Regards and 73s LA9SN AL ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 6/05/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 6/05/2005
[Dx4win] Software to share serial port among two applications?
Jim, Comfoolery is freeware programma. Got plenty off hits in google.On this forum you see some instructions. http://www.mp3car.com/vbulletin/showthread.php?t=23174page=2 there is another one : http://curioustech.home.insightbb.com/xport.html 73 marc on4ma - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Monday, April 18, 2005 1:34 AM Subject: [Dx4win] Software to share serial port among two applications? I would like to share a single COM (serial) port between two applications (DX4WIN and Writelog), so they can both have access to rig control. Jozef OM7ZZ sent me a link to a product from Eltima: http://www.eltima.com/products/serialsplitter/ This seems like a rather expensive solution ($100). Does anyone have direct experience with this or similar products before I go out and spend that kind of money? 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.15 - Release Date: 16/04/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.15 - Release Date: 16/04/2005
[Dx4win] Contest import - how many of you?
could you explain what file you import ? Adif file ? I never runned in this problem . on4ma marc - Original Message - From: Rick Graham [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, March 14, 2005 12:27 AM Subject: [Dx4win] Contest import - how many of you? Hi all, After playing around in the RTTY contest this past weekend, I decided to import that log into DX4WIN. I'm glad that DX4WIN has the capability of NOT saving your import until after you exit. This particular contest allowed you to work the same station on the same band as many times as you could but had a 3 qso in-between rule. My log WOULD have looked like this had I kept the changes (callsigns are faked to protect the innocent :) 2310Z K3ABC 40M RTTY 599 Joe MD 2310Z W5XYZ 40M RTTY 599 Frank TX 2310Z W2ZYX 40M RTTY 599 Tom NY 2311Z K3ABC 40M RTTY 599 Joe MD Etc. When I did this, I did a sort and found that I worked K3ABC (not real callsign) 38 times on the same band!!! Now take that same call for the contest on other bands, I and I have worked him a total of 84 times in a *4 hour contest!!* My question, is how many of you have similar contacts? My log is getting full because in RTTY (one of my favorite contests), I run into the same 'circle of contesters', so my same call window is filled. I guess I'm not faulting DX4WIN as it is doing exactly what it is intended to do, that I am faulting the 'weird contest rules'. Thanks for letting me vent ;) 73 DE AI3W, Rick ...contesting... where everyone is 599, but are asked for repeats. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 11/03/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 11/03/2005
[Dx4win] adif import
Hi, I want to import my contestlog from n1mm in to dx4win. Some years ago I had a small program in dos to convert CT logs into dx4win.But lost it where in the dx4win NOTE FOR THIS QSO wass filled in with wat I want like a special pfx or contest name . I imported the adif file ,buth I see in the Notes field FREQ and QSO nr.. Sure I did not save the imported qso's. Is there any program who can do a conversion ? I want to have input like PFX OO4MA ARRL DX SSB for this note for this qso fields. Marc on4ma http://users.telenet.be/on4ma -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.0 - Release Date: 8/03/2005
[Dx4win] Export log file ?
File - IMPORT/EXPORT a window is open and click on adif then file /export another window is open and ive the file a name... good luck Theo on4ma - Original Message - From: Vanderydt Theo [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Wednesday, March 02, 2005 2:43 PM Subject: [Dx4win] Export log file ? Hi all, Can anyone tell me how to export my .DXL log file to ADIF? Yes i have RTFM but could not find any help on this topic. Thanks in advance. ON4ATW Theo. ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.5.7 - Release Date: 1/03/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.5.7 - Release Date: 1/03/2005
[Dx4win] BUG or not ? USA
Just tried in v 6.03 and there it is ok .States flag is resetted when logging a new US station (never wkd) not ok in 6.04 marc on4ma - Original Message - From: Marc Wullaert [EMAIL PROTECTED] To: DX4WIN List dx4win@mailman.qth.net Sent: Saturday, February 05, 2005 7:34 AM Subject: [Dx4win] BUG or not ? USA Hi, this morning a got something rare when logging USA stations. The States flag in QSO window is not correct ! W0ZT is in MN Minnesota .This is a qso from 2002. W0ZTL is in SD South Dakota . A new qso with W0ZTL (never worked) the state stays in MN.I have to change that to SD. Same with other ones.If the suffix have one letter more dx4win take state info from previous qso's. i did't see that in previous version ! Marc on4ma http://users.telenet.be/on4ma -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 3/02/2005 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 3/02/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 3/02/2005
[Dx4win] talk messages and announcements
Matteo I changed the filters for this Talk messages window.Now it's open only if somebody on my dxcluster geive me a Talk ! If a want to see other annoucements like WWV i open my paket window ;also for answering my talks ! HNY Marc on4ma - Original Message - From: Matteo Campanella [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Thursday, January 06, 2005 7:11 AM Subject: [Dx4win] talk messages and announcements Hello, as I can recall from the past, I am pretty sure that, once opened, the Talk messages and announcement window kept refreshing adding new announcements dinamically to its contents. Right now the behhaviour is completely different, as I just get the announcements that have been already received, and upo receival of new ones the window does not get updated. Is there anyone that can help on this? I tried contacting the support, but did not get any answer in two weeks now. regards Matteo iz2eeq ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] report printing/landscape
It is almost 2 years a glitch ! No hard feelings guy's Happy New Year 2005 - Original Message - From: Steve-KF2TI [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Friday, December 31, 2004 4:15 PM Subject: Re: [Dx4win] report printing/landscape Thanks to Paul, Rick and Kurt. Seems I must have missed the conversation(s) from a while ago..I was out of town. It is a known glitch and is being looked at by Paul. Again to all a happy healthy prosperous NY Steve KF2TI On 31 Dec 2004 at 14:31, Steve-KF2TI wrote: From: Steve-KF2TI [EMAIL PROTECTED] To: dx4win@mailman.qth.net Date sent: Fri, 31 Dec 2004 14:31:59 - Priority: normal Subject:[Dx4win] report printing/landscape Good morning and Happy New Year to all. I have tried to print out my 2004 logbook and normally (the older versions), I set my printer to print in landscape mode. Tried this (with 3 printers) using Ver 6.03 and despite setting the landscape mode in the set-up screen, it continaully defaults back to normal print..most annoying and a waste of paper to boot. I did set each printer that I tried as the default printer thinking that might help, but nope. I tried to find something in the archives but didn't/couldn't Any help (direct to me) would be appreciated and I will recap for those that might experience this annoyance in the future Thanks in advance Steve, KF2TI One of the now famous 3 Steves ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win From [EMAIL PROTECTED] Fri Dec 31 12:55:06 2004 From: [EMAIL PROTECTED] (George M. Badger, III) Date: Fri Dec 31 12:57:24 2004 Subject: [Dx4win] Re: rig control In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] How do I decode the rig control script so I can change which filter et al is selected when I use that feature? I open ICOM 756 Pro.rig and most of the lines makes sense but I'm stuck on defining the filter selection. Ver 6.03 IC-756PROIII. Thanks, and Happy New Year to all. -- .-. / Physics \ /rules! / \ .' _ |/ oo\' (__)\ _ \ \.' `. \ \ / \ \ '\ . ( ) \ '-| )--| :. \ | | | | \ '. c__; c__; '-..'.__ GEO de Soquel George M. Badger III/W3AB [EMAIL PROTECTED]http://www.mbari.org/~geo From [EMAIL PROTECTED] Fri Dec 31 13:24:08 2004 From: [EMAIL PROTECTED] (F6EXV) Date: Fri Dec 31 13:26:37 2004 Subject: [Dx4win] Log printing Message-ID: [EMAIL PROTECTED] Hello all ! Is there a chance that on the next update, the log printing will offer the possibility NOT to print the Logbook sorted by date title on top (the date will appear in French in my case, not the rest of the title) and the printed by Dx4Win add at the bottom ? My log would be 566 pages, and I do not intend to print it in one go (my printer would not like to work so hard at once ...) Is the only option to export to a csf file and print out of Excel ? if so, the whole procedure has to be remembered, in terms of column widths, etc. Thanks and happy celebrations, with thoughts about those who will not celebrate tonight, especially all our South Asian friends. 73 Paul F6EXV
[Dx4win] www.dx4win.com inavailable
Is working here ok ! on4ma - Original Message - From: Radivoj KAR [EMAIL PROTECTED] To: DX4WIN Reflector (E-mail) dx4win@mailman.qth.net Sent: Tuesday, October 12, 2004 12:04 AM Subject: [Dx4win] www.dx4win.com inavailable Tried to reboot PC and re-tried to access DX4WIN site. Each time I get re-directed to http://auto.search.msn.com/response.asp?MT=www.dx4win.comsrch=3prov=utf8 and get a message the page cannot be displayedCannot find server or DNS Error No problem to get to www.qrz.com and other pages. Do not understand what happens! 73, Radi F6GNZ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Need LSB not RTTY
you can change the radio file . 1) make first a copy off the radio file ! 2)open the radio file in dx4win603/radios/icom756pro loot at modes [MODES] AM=2;2;N CW=3,7;3,7;N FM=5;5;N RTTY=4,8;4,8;N SSB=0,1;0,1;Y change rtty= 0,1;01;Y save it. start again dx4win and when you will click on a rtty spot it wil go to ssb.Now you can see in the manual what precisely code have to given to have allways LSB.I'm not own a icom ,i tried with my 1000mp and it worked ok. marc on4ma - Original Message - From: Bob Marzari [EMAIL PROTECTED] To: Dx4win dx4win@mailman.qth.net Sent: Saturday, August 07, 2004 10:35 PM Subject: [Dx4win] Need LSB not RTTY Is there a way when clicking on a RTTY spot to have my Icom750PRO come up in LSB and not RTTY? ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Reinstall to new PC
What I do : I backup my SAVE directory on to a cd and second HD. Make a new complete install off dx4win. Than copy the save directory in the new installation off dx4win/save directory works for me ... 73 marc on4ma - Original Message - From: Steve GW4BLE [EMAIL PROTECTED] To: DX4WIN dx4win@mailman.qth.net Sent: Monday, February 09, 2004 5:37 PM Subject: [Dx4win] Reinstall to new PC Simple question DX4WIN 6.02 currently on Win98SE machine. I will need to reinstall on new PC running WinXP home-edition. Presumably (?) copying the whole dx4win 6.02 directory onto CD and then copying onto new machine will be just fine.. ? any caveats? Steve GW4BLE ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.580 / Virus Database: 367 - Release Date: 6/02/2004
[Dx4win] Add a New County
its already in there !! 73/dx on4ma - Original Message - From: Joe Young [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, January 19, 2004 8:51 PM Subject: [Dx4win] Add a New County I would like to know how to add a new county name to the county database in DX4WIN V6. The new county is Broomfield, CO. Thanks from Joe, W6RLL ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Telnet??
check in preferences/rtty the type off interface =would be regular= and comport tcp/ip dont forget to save it. in rtty window click right mouse button and internet connection ..choose your dxcluster wright ??? 73/dx on4ma marc - Original Message - From: Tom Johnson [EMAIL PROTECTED] To: DX4WIN dx4win@mailman.qth.net Sent: Wednesday, November 05, 2003 4:43 AM Subject: [Dx4win] Telnet?? When I first got version 5.03, a friend set it up for me and I could get the spots by right clicking the RTTY window (as I recall). A while ago, I transferred the program to another computer, and now I can't get the RTTY window to come up. Obviously, I have not done something in the preferences category. Can anyone tell me how to get Telnet back? Thanks Tom N4TJ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.535 / Virus Database: 330 - Release Date: 1/11/2003
[Dx4win] dx4win.ini
you can easely write a new one.go to Preferences and File/write ini file . you can change the path where the file have to be written ! 73 marc on4ma - Original Message - From: WC7N [EMAIL PROTECTED] To: DX4WIN Group dx4win@mailman.qth.net Sent: Wednesday, September 03, 2003 7:15 PM Subject: [Dx4win] dx4win.ini Using 6.02: While helping a friend who had screwed up his .ini file I noticed that I don't have one in the save directory of 6.02. I do have one in 6.01 which I have never deleted from my computer. Is it possible that my 6.02 is using the .ini file of 6.01? The are both in the Program Files folder. Program is working great just really surprised me to find I had no .ini file. Rod WC7N [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] V6.02 question
happens sometimes .Not always running XP pro -dx4win 6.02 maybe it is the OS !!! on4ma marc - Original Message - From: Richard L. King [EMAIL PROTECTED] To: Rick Stoneking [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Thursday, July 10, 2003 6:36 PM Subject: Re: [Dx4win] V6.02 question This happens to me once in a while. I have been unable to figure out if there is a specific sequence that causes it happen since I can never recreate the problem when I want to. But it does happen. It isn't a problem, but is annoying when it occurs. I am running DX4WIN 6.02 and and Win 98SE. 73, Richard - K5NA
[Dx4win] QSL/ADDRESS FILES
pse URL ... tnx - Original Message - From: Larry Alkoff [EMAIL PROTECTED] To: DX4WIN dx4win@mailman.qth.net; R Hicks [EMAIL PROTECTED] Sent: Tuesday, May 27, 2003 5:56 AM Subject: Re: [Dx4win] QSL/ADDRESS FILES Dick how is your QSL manager list used? Is it imported into dx4win.cty or used stand-alone? Pardon my ignorance but I couldn't find anything in DX4WIN Help. Larry N2LA On Tue, 27 May 2003 01:35:01 -, R Hicks wrote: I have updated the files for DX4WIN on my web page. There are now 10875 managers and 5301 addresses. It is current thru todays date with all mangers before 1998 removed. Dick Larry Alkoff N2LA - Austin TX ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Controlling computer time
this another freeware time clock a.. Visit DS Clock home page in the Internet at http://www.dualitysoft.com/dsclock/. on4ma 73 - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: Dick Flanagan [EMAIL PROTECTED]; 'REFLECTOR DX4WIN' dx4win@mailman.qth.net Sent: Saturday, March 15, 2003 6:32 PM Subject: RE: [Dx4win] Controlling computer time At 09:17 AM 3/15/2003 -0800, Dick Flanagan W6OLD wrote: As far as I can tell, the automatic XP time synchronization is fixed at once each week with no means of reducing the time interval. Too bad D4 won't work. It seems like a much more flexible application. There is some obscure registry setting you can modify to change this, but I've never tried it. I'm happy with Tardis. It tells you the clock drift (mine is -1.8 seconds/day) which is something that the Microsoft applet won't do. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] dx4w 6.01 ALT -S and MERGING
Just installed dx4win 6.01 under Win XP pro dutch language. ALT +S is closing down dx4win ?? When I merged my 5.03 dx4win .cty with the new one the program was hanging at the qsl manager merge .When starting merging and at qsl manager it was very slow and after 51% it hangs ??? 73 ON4MA Marc DXCLUSTER CONCENTRATOR visit www.on5oo.com
[Dx4win] DXC dxconcentrator update
Give a visit to www.on5oo.com. On this page you find a telnetclient program written by Jack ON5OO.This program is written for dx'ers and contesters.In 1minute you are setup to connect a max of 50 dxclusters on the internet. You can download a trailversion. Now there is the possibilty to buy with credit-card savely. Give it a try . 73 / dx ON4MA Marc DXCLUSTER CONCENTRATOR visit www.on5oo.com
[Dx4win] DXC -dxcluste rconcentrator - 2e part
Hi, There where some problems to download the program.The download link is working now and a new version is avaible.Also the tryout time is changed.Jacques ON5OO is working now to find a system for payment by creditcards.If you could help send him a email. Copied from the website : The current version of DXC is 1.7 build 11. You may download the product here http://homeusers.brutele.be/on5oo/ and try it. Without a license key DXC will run for about 30 minutes, full featured, except that it will connect to only 2 dxclusters at the time. 73 ON4MA Marc DXCLUSTER CONCENTRATOR visit www.on5oo.com
[Dx4win] ON5OO web page ?
try www.on5oo.com or http://homeusers.brutele.be/on5oo/ is soud be working and downloading is ok via ftp server 73 marc on4ma - Original Message - From: Milan Gütter [EMAIL PROTECTED]00 To: dx4win@mailman.qth.net Sent: Saturday, October 12, 2002 11:09 AM Subject: [Dx4win] ON5OO web page ? Hi all, I wonder, if http://www.on5oo.com page exists. For me - not. Not able to find it (this web could be quite new?) The http://www.qsl.net/on5oo/ works but it could be a old web page without DX CLUSTER CONCENTRATOR 73 Milan, OK1FM Milan GÜTTER http://www.ok1fm.com E-mail: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] 7J1AAI NOT Ogasawara
Mine says JAPAN . on4ma - Original Message - From: A. Sewell N5NA [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, September 15, 2002 4:34 AM Subject: [Dx4win] 7J1AAI NOT Ogasawara My version of DX4WIN had 7J1AAI mapped as Ogasawara.
[Dx4win] test
test ...
[Dx4win] Free telnet program
http://village.infoweb.ne.jp/~ja3thl/netdepc.htm Netdepc is complete freeware telnet program acces to 12 dxclusters (programmable) and output to other computer/software. enjoy it marc on4ma
[Dx4win] Web Update
guy on4aoi is on holiday ,maybe he have no acces to internet/email - Original Message - From: Ted Sarah - W8TTS [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: Guillermo Vazquez C. [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Saturday, July 06, 2002 4:05 PM Subject: Re: [Dx4win] Web Update Don't know then, other than he may be away. He should see these posts on the DX4Win reflector and hopefully reply directly to you. Ted Brian Wruble wrote: Yup. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ted Sarah - W8TTS Sent: Saturday, July 06, 2002 9:54 AM To: [EMAIL PROTECTED] Cc: Guillermo Vazquez C.; dx4win@mailman.qth.net Subject: Re: [Dx4win] Web Update Is this, [EMAIL PROTECTED], the email address that you used? Ted - W8TTS Brian Wruble wrote: Some of the files require a password to open, which ON4AOI will give you on request. However, I sent him an email about a week ago asking for the current password and have as yet received no response. Please let me know if you have better luck. 73, Brian W3BW Scanned with NAV2002 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- 73 - Ted - W8TTS Amateur Radio Lighthouse Society (ARLHS) #115 Great Lakes Lighthouse Keepers Association (GLLKA) Lighthouse Islands awards files for DX4WIN others: http://home.neo.rr.com/tsarah/www/w8tts.html Worked All Great Lakes Lighthouse/Lightships (WAGLLL) Award http://home.neo.rr.com/tsarah/www/WAGLLL_Award_Rules.html Just South of the North Coast Keep the Flame! Scanned with NAV2002 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Icom 756 pro - dx4win help needed
My friend ON5TN Karel have some little problem with dx4win and his 756 pro.Every time starting dx4win ,the program can not find the rig.Radio time out ,and then he have a windown Error in module dx4win 5cx etc etc After dx4win is running and do a Start radio it is working.Whe even tried to slow down the baud rate and change the polling rate buth still got that problem. Shoud whe change the adress on both sides ? Any help pse ,could already be in the archives ,pse reply direct to me on4ma marc
[Dx4win] CW port keying with XP
Steve, Brad and Duane A fresh Win XP professional is installed here ,and I can only use LPT1 for cw keying. LPT 2 is installed but do not work for keying. If someone have a fix let me know. Marc ON4MA
[Dx4win] Connection via Internet ad-on
copy this one also to your list on0dxk-5 194.7.17.54:8000 this is the Kortrijkse dxcluster
[Dx4win] vp6di ducie info needed
Hi, I lost my cordinates for vp6di.I got a crash and have install a fresh dx4win 5.03 and merged my dx4win.cty file. Vp6di is not imported correctly showing as Pitcairn Island. The vp6di webpage is not working 100%. Any help for the cordinates . Thanks Marc on4ma
[Dx4win] cannot read country list
John, I think the best way is to reinstalling dx4win.IF that's is ok ,I will help you to enter ducie in that list ... what say ? FROM THE DESK OFF ON4MA MARC WULLAERT [EMAIL PROTECTED] [EMAIL PROTECTED] Phone 032-0476/33.58.70 - Original Message - From: n3drk [EMAIL PROTECTED] To: dx4win dx4win@mailman.qth.net Sent: Tuesday, March 26, 2002 5:27 AM Subject: Re: [Dx4win] cannot read country list I should make this known. What i did to the country file was tried to open it with notepad. Yeah ok i can hear you all out there so i admit im a moron.!! lol So how do i get it back to the original condition the file was in? thanks john
[Dx4win] Return Address Labels
I think its no possible from dx4win ,but can be done easy in MICROSOFT WORD 95-98-2000. In Word go to TOOLS /ENVELOP AND LABELS ,choose your label or create a new one and next NEW DOCUMENT.There you see the whole page and make one and whit copy/paste do the otherones.fixed in 1minit. 73/dx FROM THE DESK OFF ON4MA MARC WULLAERT [EMAIL PROTECTED] [EMAIL PROTECTED] Phone 032-0476/33.58.70 - Original Message - From: Robert L. Gill [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Sunday, March 03, 2002 12:09 PM Subject: [Dx4win] Return Address Labels Hello All, I am trying to print return address labels from dx4win. I am sure this can be done but how? If this is covered somewhere in archives point me in the right direction and I will research it. Otherwise any help appreciated. Tnx / 73 Robert L. (Bob) Gill, N5RG ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win