Re: [Dx4win] RTTY Window spots

[Ian Fugler]

Sorted.   I had omitted to tick the 'Check for DX spots' box in the RTTY window 
under Preferences.  Now I have both VE7CC spots on the Packet Window and 
(selective) RBN spots on the RTTY Window flowing into the bandmap/Dx Spots 
window as I did before losing the configuration.  

I have written the config into a txt file for future use.  That was the only 
form of back-up that I had previously misunderstood and which failed when I had 
to reload DX4WIN.

73,

Ian G4IIY

-Original Message-
From: Ian Fugler [mailto:zen90...@zen.co.uk] 
Sent: 14 October 2018 08:46
To: 'Jim Reisert AD1C'
Cc: 'DX4WIN Reflector'
Subject: RE: [Dx4win] RTTY Window spots

Thanks, Jim.

I do use VE7CC as the primary cluster interface into DX4WIN.  But I just like 
to gather a secondary set of FOC RBN spots from DZ4WIN's via the RTTY Window.  
I have connected to DJ1YFK and the spots are showing in that RTTY Window.  But 
I can't get them to flow in to the Packet Window/Bandmap.

Not to worry, I'll keep trying.

72,

Ian G4IIY

-Original Message-
From: Jim Reisert AD1C [mailto:jjreis...@alum.mit.edu] 
Sent: 14 October 2018 04:35
To: zen90...@zen.co.uk
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] RTTY Window spots

On Sat, Oct 13, 2018 at 9:33 AM Ian Fugler G4IIY wrote:

> I like to have two cluster spots flowing in to the DX Spots window by using
> the RTTY Window to connect to a second cluster.  I have connected to two
> different clusters, but the spots from the RTTY Window are not flowing into
> the DX Spots Window.  I cannot recall how to enable that.

VE7CC's user program is ideal for connecting to multiple DX cluster nodes:

http://www.bcdxc.org/ve7cc/

-- 
Jim Reisert AD1C, , http://www.ad1c.us

---
This email has been checked for viruses by AVG.
https://www.avg.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Window spots

[Ian Fugler]

Thanks, Jim.

I do use VE7CC as the primary cluster interface into DX4WIN.  But I just like 
to gather a secondary set of FOC RBN spots from DZ4WIN's via the RTTY Window.  
I have connected to DJ1YFK and the spots are showing in that RTTY Window.  But 
I can't get them to flow in to the Packet Window/Bandmap.

Not to worry, I'll keep trying.

72,

Ian G4IIY

-Original Message-
From: Jim Reisert AD1C [mailto:jjreis...@alum.mit.edu] 
Sent: 14 October 2018 04:35
To: zen90...@zen.co.uk
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] RTTY Window spots

On Sat, Oct 13, 2018 at 9:33 AM Ian Fugler G4IIY wrote:

> I like to have two cluster spots flowing in to the DX Spots window by using
> the RTTY Window to connect to a second cluster.  I have connected to two
> different clusters, but the spots from the RTTY Window are not flowing into
> the DX Spots Window.  I cannot recall how to enable that.

VE7CC's user program is ideal for connecting to multiple DX cluster nodes:

http://www.bcdxc.org/ve7cc/

-- 
Jim Reisert AD1C, , http://www.ad1c.us

---
This email has been checked for viruses by AVG.
https://www.avg.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Window spots

[Jim Reisert AD1C]

On Sat, Oct 13, 2018 at 9:33 AM Ian Fugler G4IIY wrote:

> I like to have two cluster spots flowing in to the DX Spots window by using
> the RTTY Window to connect to a second cluster.  I have connected to two
> different clusters, but the spots from the RTTY Window are not flowing into
> the DX Spots Window.  I cannot recall how to enable that.

VE7CC's user program is ideal for connecting to multiple DX cluster nodes:

http://www.bcdxc.org/ve7cc/

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY Window spots

[Ian Fugler]

I like to have two cluster spots flowing in to the DX Spots window by using
the RTTY Window to connect to a second cluster.  I have connected to two
different clusters, but the spots from the RTTY Window are not flowing into
the DX Spots Window.  I cannot recall how to enable that.  

 

Any pointers appreciated, please.

 

73,

 

Ian G4IIY

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY/MMTTY

[kostas sv1dpi]

in MMTTY window do a right click and "edit" macros

Check the "Control keys"

Probably name is in 18


73 Kostas SV1DPI

Στις 29/11/2017 04:24, ο William Liporace έγραψε:

OK, I click on one of the macros and got Paul as my name. Paul's QTH.
Where is everything setup. I see the macro keys.. some help??

TNX Will WC2L
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to sv1...@otenet.gr

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY/MMTTY

[David Kozinn, K2DBK]

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY/MMTTY

[William Liporace]

OK, I click on one of the macros and got Paul as my name. Paul's QTH.
Where is everything setup. I see the macro keys.. some help??

TNX Will WC2L
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] rtty

[Courtney Judd]

wow, worked 3 new RTTY dxcc today: 9U4M,VP2MDC and J5T looking for 
VK9MA for another. BUT, last evening I saw 9U4M spotted on 40 doing rtty 
up 2. So I dropped down to 40 and sure enough Gritty showed him working 
on the spotted freq correctly. here is where things get crazy. I have 
been using MMTTY with DX4WIN and Writelog thru microHam keyer with the 
router software. Never had any problems or seen this behavior before. 
When I looked at the MMTTY print out window I see everything printed out 
in reverse... that is qc qc m4u9 m4u9 pu gritty shows them correctly 
so I know it's not them. So I send my call... looks like this iw4k iw4k 
iw4k this has me completely buffaloed for the next hour and half 
I went thru dx4win preferences, mmtty setup, and microham router looking 
for anything out of place and for something to get it right again. I 
have never seen this in all the time before. Nothing I did worked. 
Finally just for something to do I clicked on CLEAR in the mmtty print 
window. Voila! Back to normal and was able to get the 9U4 boys in the 
log. Can anyone explain this behavior or is it this old dude going 
crazy? lol 73's Cort K4WI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] [RTTY] 2016 Digital Mode Most Wanted Survey

[Ed Muns]

Your input needed!

300 responses came quickly ... then, nothing.  There were over 1000
responses to the last survey and we'd like at least that many to make this
one meaningful.

Please take the survey NOW so we get a more accurate tally of current
Digital DXCC needs.  If you use LotW or a DXCC tracking program like DX Lab
Suite or DX4Win, etc., it is easy to mark your needs on the survey.
Entities are sorted by Prefix.

Please see Don's original email below for details.

73,
Don AA5AU
Ed W0YK
Larry K8UT
__

-Original Message-
From: RTTY [mailto:rtty-boun...@contesting.com] On Behalf Of Don Hill AA5AU
Sent: 28 April, 2016 20:04
To: 'RTTY Reflector'
Subject: [RTTY] 2016 Digital Mode Most Wanted Survey

All digital operators are invited to participate in the 2016 Digital Mode
Most Wanted Survey. Previously known as the "RTTY Most Needed DXCC Entities
Survey" in 2002, 2005 and 2011, the name has been changed to reflect current
times and to be more in line with the Digital DXCC award.

Several entities at the top of the 2011 list have been active recently, so
now is a good time to find out what's needed on the digital modes. The
survey can be found here:

http://survey.hamdocs.com/index.php/468764

Please be sure to read the "How to use the 2016 Digital Mode DX Most Wanted
Survey" at the top of the page. The survey will only be available for two
weeks and will close at 2359Z on Friday, May 13, 2016. So don't delay,
please complete the survey promptly. It is our hope to have the results
available before the Dayton Hamvention. It's very important that every
digital operator take part in the survey in order to achieve the most
accurate results possible. These surveys help DXpedition planners and are of
interest to all digital operators. Feel free to forward this invitation to
other groups.

A new feature has been added to this year's survey. It's now possible to
work on the survey, take a break from it and resume it later. You don't have
to complete the survey all at one time. There is a button at the very end of
the survey that says "Resume Later". Clicking this option will bring you to
a page that asks for your name, a password and email address. Email will be
sent to you with a link that will bring you back to the survey you were
working on. Or you can resume the survey using your password.

Thank you for your participation!

73 from the Survey Team:
Don AA5AU
Ed W0YK
Larry K8UT

Past survey results can be found here:

http://www.aa5au.com/rtty/rtty-most-needed-dxcc-entities/




___
RTTY mailing list
r...@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] [RTTY] 2016 Digital Mode Most Wanted Survey

[Ed Muns]

Don AA5AU will publish on his website where the past surveys are now:

http://www.aa5au.com/rtty/rtty-most-needed-dxcc-entities/

Ed W0YK

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Barry
Sent: 30 April, 2016 09:55
To: dx4win@mailman.qth.net; Ed Muns
Subject: Re: [Dx4win] [RTTY] 2016 Digital Mode Most Wanted Survey

Done.  Where will the results be published?

Barry W2UP


On 4/30/2016 10:38, Ed Muns wrote:
> Your input needed!
>
> 300 responses came quickly ... then, nothing.  There were over 1000
> responses to the last survey and we'd like at least that many to make this
> one meaningful.
>
> Please take the survey NOW so we get a more accurate tally of current
> Digital DXCC needs.  If you use LotW or a DXCC tracking program like DX
Lab
> Suite or DX4Win, etc., it is easy to mark your needs on the survey.
> Entities are sorted by Prefix.
>
> Please see Don's original email below for details.
>
> 73,
> Don AA5AU
> Ed W0YK
> Larry K8UT
> __
>
> -Original Message-
> From: RTTY [mailto:rtty-boun...@contesting.com] On Behalf Of Don Hill
AA5AU
> Sent: 28 April, 2016 20:04
> To: 'RTTY Reflector'
> Subject: [RTTY] 2016 Digital Mode Most Wanted Survey
>
> All digital operators are invited to participate in the 2016 Digital Mode
> Most Wanted Survey. Previously known as the "RTTY Most Needed DXCC
Entities
> Survey" in 2002, 2005 and 2011, the name has been changed to reflect
current
> times and to be more in line with the Digital DXCC award.
>
> Several entities at the top of the 2011 list have been active recently, so
> now is a good time to find out what's needed on the digital modes. The
> survey can be found here:
>
> http://survey.hamdocs.com/index.php/468764
>
> Please be sure to read the "How to use the 2016 Digital Mode DX Most
Wanted
> Survey" at the top of the page. The survey will only be available for two
> weeks and will close at 2359Z on Friday, May 13, 2016. So don't delay,
> please complete the survey promptly. It is our hope to have the results
> available before the Dayton Hamvention. It's very important that every
> digital operator take part in the survey in order to achieve the most
> accurate results possible. These surveys help DXpedition planners and are
of
> interest to all digital operators. Feel free to forward this invitation to
> other groups.
>
> A new feature has been added to this year's survey. It's now possible to
> work on the survey, take a break from it and resume it later. You don't
have
> to complete the survey all at one time. There is a button at the very end
of
> the survey that says "Resume Later". Clicking this option will bring you
to
> a page that asks for your name, a password and email address. Email will
be
> sent to you with a link that will bring you back to the survey you were
> working on. Or you can resume the survey using your password.
>
> Thank you for your participation!
>
> 73 from the Survey Team:
> Don AA5AU
> Ed W0YK
> Larry K8UT
>
> Past survey results can be found here:
>
> http://www.aa5au.com/rtty/rtty-most-needed-dxcc-entities/
>
>
>
>
> ___
> RTTY mailing list
> r...@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] [RTTY] 2016 Digital Mode Most Wanted Survey

[Barry]

Done.  Where will the results be published?

Barry W2UP


On 4/30/2016 10:38, Ed Muns wrote:

Your input needed!

300 responses came quickly ... then, nothing.  There were over 1000
responses to the last survey and we'd like at least that many to make this
one meaningful.

Please take the survey NOW so we get a more accurate tally of current
Digital DXCC needs.  If you use LotW or a DXCC tracking program like DX Lab
Suite or DX4Win, etc., it is easy to mark your needs on the survey.
Entities are sorted by Prefix.

Please see Don's original email below for details.

73,
Don AA5AU
Ed W0YK
Larry K8UT
__

-Original Message-
From: RTTY [mailto:rtty-boun...@contesting.com] On Behalf Of Don Hill AA5AU
Sent: 28 April, 2016 20:04
To: 'RTTY Reflector'
Subject: [RTTY] 2016 Digital Mode Most Wanted Survey

All digital operators are invited to participate in the 2016 Digital Mode
Most Wanted Survey. Previously known as the "RTTY Most Needed DXCC Entities
Survey" in 2002, 2005 and 2011, the name has been changed to reflect current
times and to be more in line with the Digital DXCC award.

Several entities at the top of the 2011 list have been active recently, so
now is a good time to find out what's needed on the digital modes. The
survey can be found here:

http://survey.hamdocs.com/index.php/468764

Please be sure to read the "How to use the 2016 Digital Mode DX Most Wanted
Survey" at the top of the page. The survey will only be available for two
weeks and will close at 2359Z on Friday, May 13, 2016. So don't delay,
please complete the survey promptly. It is our hope to have the results
available before the Dayton Hamvention. It's very important that every
digital operator take part in the survey in order to achieve the most
accurate results possible. These surveys help DXpedition planners and are of
interest to all digital operators. Feel free to forward this invitation to
other groups.

A new feature has been added to this year's survey. It's now possible to
work on the survey, take a break from it and resume it later. You don't have
to complete the survey all at one time. There is a button at the very end of
the survey that says "Resume Later". Clicking this option will bring you to
a page that asks for your name, a password and email address. Email will be
sent to you with a link that will bring you back to the survey you were
working on. Or you can resume the survey using your password.

Thank you for your participation!

73 from the Survey Team:
Don AA5AU
Ed W0YK
Larry K8UT

Past survey results can be found here:

http://www.aa5au.com/rtty/rtty-most-needed-dxcc-entities/




___
RTTY mailing list
r...@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] [RTTY] 2016 Digital Mode Most Wanted Survey

[Ed Muns]

Your input needed!

300 responses came quickly ... then, nothing.  There were over 1000
responses to the last survey and we'd like at least that many to make this
one meaningful.

Please take the survey NOW so we get a more accurate tally of current
Digital DXCC needs.  If you use LotW or a DXCC tracking program like DX Lab
Suite or DX4Win, etc., it is easy to mark your needs on the survey.
Entities are sorted by Prefix.

Please see Don's original email below for details.

73,
Don AA5AU
Ed W0YK
Larry K8UT
__

-Original Message-
From: RTTY [mailto:rtty-boun...@contesting.com] On Behalf Of Don Hill AA5AU
Sent: 28 April, 2016 20:04
To: 'RTTY Reflector'
Subject: [RTTY] 2016 Digital Mode Most Wanted Survey

All digital operators are invited to participate in the 2016 Digital Mode
Most Wanted Survey. Previously known as the "RTTY Most Needed DXCC Entities
Survey" in 2002, 2005 and 2011, the name has been changed to reflect current
times and to be more in line with the Digital DXCC award.

Several entities at the top of the 2011 list have been active recently, so
now is a good time to find out what's needed on the digital modes. The
survey can be found here:

http://survey.hamdocs.com/index.php/468764

Please be sure to read the "How to use the 2016 Digital Mode DX Most Wanted
Survey" at the top of the page. The survey will only be available for two
weeks and will close at 2359Z on Friday, May 13, 2016. So don't delay,
please complete the survey promptly. It is our hope to have the results
available before the Dayton Hamvention. It's very important that every
digital operator take part in the survey in order to achieve the most
accurate results possible. These surveys help DXpedition planners and are of
interest to all digital operators. Feel free to forward this invitation to
other groups.

A new feature has been added to this year's survey. It's now possible to
work on the survey, take a break from it and resume it later. You don't have
to complete the survey all at one time. There is a button at the very end of
the survey that says "Resume Later". Clicking this option will bring you to
a page that asks for your name, a password and email address. Email will be
sent to you with a link that will bring you back to the survey you were
working on. Or you can resume the survey using your password.

Thank you for your participation!

73 from the Survey Team:
Don AA5AU
Ed W0YK
Larry K8UT

Past survey results can be found here:

http://www.aa5au.com/rtty/rtty-most-needed-dxcc-entities/




___
RTTY mailing list
r...@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY & dx4win latest version

[Jim Reisert AD1C]

> I see there is a RTTY window (that you can't close )and a MTTY WINDOW also
>  I believe I'm going to USE   The sound card inside my router and the Mitty 
> window in dx4win.
> why are there two windows?

Bernie, off the top of my head, the RTTY window was to operate RTTY
with external hardware devices that had a COM port interface, like a
HAL or TNC.  The MMTTY window interfaces to the MMTTY software which
makes use of your computer's sound card.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY & dx4win latest version

[w...@att.net]

OK thanks Jim , and thanks for The extra effort you put into the program 
yeah I remember the days of the TNC I just want to make sure that I'm doing the 
set up right
Bernie/WO2N.>
PS: By the way you see that greater than arrow I used after my call sign, an 
old timer told me that in early days of radio teletype that was the sign for 
over. (transmission complete, back to you)
Tnx, CUL 
Bernie/WO2N>

Sent from my iPhone 6s>




On Jan 22, 2016, at 9:58 AM, Jim Reisert AD1C  wrote:

>> I see there is a RTTY window (that you can't close )and a MTTY WINDOW also
>> I believe I'm going to USE   The sound card inside my router and the Mitty 
>> window in dx4win.
>> why are there two windows?
> 
> Bernie, off the top of my head, the RTTY window was to operate RTTY
> with external hardware devices that had a COM port interface, like a
> HAL or TNC.  The MMTTY window interfaces to the MMTTY software which
> makes use of your computer's sound card.
> 
> -- 
> Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY & dx4win latest version

[Dave Perry, N4QS]

MMTTY can also make use of an external sound card such as Signalink USB or
any other sound card installed in your Windows software.  Open the MMTTY
window in DX4WIN, select Option tab in MMTTY, then Soundcard tab and select
the sound card that you would like to use.  As someone suggested earlier, if
you have an external soundcard for RTTY, it is good practice to ensure that
your computer soundcard is selected as the default in Windows--while the
appropriate external soundcard for RTTY is selected in MMTTY as the one it
will use.  This ensures that computer generated sounds and beeps do not get
sent to your radio.

73,

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim
Reisert AD1C
Sent: Friday, January 22, 2016 8:58 AM
To: w...@att.net
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] RTTY & dx4win latest version

> I see there is a RTTY window (that you can't close )and a MTTY WINDOW also
>  I believe I'm going to USE   The sound card inside my router and the
Mitty window in dx4win.
> why are there two windows?

Bernie, off the top of my head, the RTTY window was to operate RTTY with
external hardware devices that had a COM port interface, like a HAL or TNC.
The MMTTY window interfaces to the MMTTY software which makes use of your
computer's sound card.

--
Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY & dx4win latest version

[w...@att.net]

OK will do thanks

Sent from my iPhone 6s>




On Jan 22, 2016, at 10:55 AM, Jim Reisert AD1C  wrote:

>> Good advice thanks Dave
>> I opened up the MTTYwindow  in Dx4 but I don't see an option Tab ?I'm 
>> missing something here?
> 
> Configure MMTTY completely OUTSIDE of DX4WIN.  Make sure you can
> transmit and receive.
> 
> Once that is done, all DX4WIN needs is the path to the MMTTY.exe file.
> See this old application note:
> 
> http://dx4win.ad1c.us/appnotes/mmtty.html
> 
> -- 
> Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY & dx4win latest version

[w...@att.net]

Good advice thanks Dave 
I opened up the MTTYwindow  in Dx4 but I don't see an option Tab ?I'm missing 
something here?
Bernie


Sent from my iPhone 6s>




> On Jan 22, 2016, at 10:08 AM, Dave Perry, N4QS <n...@comcast.net> wrote:
> 
> MMTTY can also make use of an external sound card such as Signalink USB or
> any other sound card installed in your Windows software.  Open the MMTTY
> window in DX4WIN, select Option tab in MMTTY, then Soundcard tab and select
> the sound card that you would like to use.  As someone suggested earlier, if
> you have an external soundcard for RTTY, it is good practice to ensure that
> your computer soundcard is selected as the default in Windows--while the
> appropriate external soundcard for RTTY is selected in MMTTY as the one it
> will use.  This ensures that computer generated sounds and beeps do not get
> sent to your radio.
> 
> 73,
> 
> Dave, N4QS
> 
> -Original Message-
> From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim
> Reisert AD1C
> Sent: Friday, January 22, 2016 8:58 AM
> To: w...@att.net
> Cc: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] RTTY & dx4win latest version
> 
>> I see there is a RTTY window (that you can't close )and a MTTY WINDOW also
>> I believe I'm going to USE   The sound card inside my router and the
> Mitty window in dx4win.
>> why are there two windows?
> 
> Bernie, off the top of my head, the RTTY window was to operate RTTY with
> external hardware devices that had a COM port interface, like a HAL or TNC.
> The MMTTY window interfaces to the MMTTY software which makes use of your
> computer's sound card.
> 
> --
> Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY & dx4win latest version

[Jim Reisert AD1C]

> Good advice thanks Dave
> I opened up the MTTYwindow  in Dx4 but I don't see an option Tab ?I'm missing 
> something here?

Configure MMTTY completely OUTSIDE of DX4WIN.  Make sure you can
transmit and receive.

Once that is done, all DX4WIN needs is the path to the MMTTY.exe file.
See this old application note:

http://dx4win.ad1c.us/appnotes/mmtty.html

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] rtty

[Courtney Judd]

thanks Bud that solved the problem. I saw nothing about the difference 
between cap X and small x in the help files but you hit the nail on the 
head and got me straightened out! Tnx 73's Cort K4WI



Bud Semon 
Sunday, January 17, 2016 4:27 PM
Cort,

%x (small x) sends the date, so that is why you are sending the date.  
I think you want %X (capital X), which starts the transmission - even 
though it says starts a PSK transmission.  %X is what I am using.


Offhand, I can't find the complete definitions of all the control keys 
with capital letters - maybe someone else can point us at it.


Good luck.

73, Bud N7CW



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] rtty

[Dave Perry, N4QS]

Use a %X to start transmission.  Must be a capital X.

73,

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney
Judd
Sent: Sunday, January 17, 2016 3:52 PM
To: Dx4win@mailman.qth.net
Subject: [Dx4win] rtty

hi all need some help getting mmtty to work in dx4win. I am trying to get
the rtty buttons programed but I am not clear on what %(letter) starts
transmission. %e stops it. I have %x will start it but sends a date along
with it which is not what I want. F1 button is this: 
CQ|%x%Mcq cq cq de %~ %~%m%E .This works but sends 1/16/2016 in front of
CQ etc. The help file shows nothing other than %M, %C, and %X what to
use in place? thanks Cort K4WI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] rtty

[Dan Violette]

Good read Bud.  I missed the "x" versus "X".  Cort, that will do it.  DX4WIN
list:

http://www.dx4win.com/HelpVer804/index.html?noteeditfunckeys.htm

Dan, KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bud Semon
Sent: Sunday, January 17, 2016 2:28 PM
To: Courtney Judd; DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] rtty

Cort,

%x (small x) sends the date, so that is why you are sending the date.  I
think you want %X (capital X), which starts the transmission - even though
it says starts a PSK transmission.  %X is what I am using.

Offhand, I can't find the complete definitions of all the control keys with
capital letters - maybe someone else can point us at it.

Good luck.

73, Bud N7CW

On Sun, Jan 17, 2016 at 2:52 PM, Courtney Judd <k...@k4wi.net> wrote:

> hi all need some help getting mmtty to work in dx4win. I am trying to 
> get the rtty buttons programed but I am not clear on what %(letter) 
> starts transmission. %e stops it. I have %x will start it but sends a 
> date along with it which is not what I want. F1 button is this: 
> CQ|%x%Mcq cq cq de %~ %~%m%E .This works but sends 1/16/2016 in front 
> of CQ etc. The help file shows nothing other than %M, %C, and %X 
> what to use in place? thanks Cort K4WI 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] rtty

[Courtney Judd]

hi all need some help getting mmtty to work in dx4win. I am trying to 
get the rtty buttons programed but I am not clear on what %(letter) 
starts transmission. %e stops it. I have %x will start it but sends a 
date along with it which is not what I want. F1 button is this: 
CQ|%x%Mcq cq cq de %~ %~%m%E .This works but sends 1/16/2016 in front of 
CQ etc. The help file shows nothing other than %M, %C, and %X what 
to use in place? thanks Cort K4WI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY with MMTTY

[RadioDen45]

Hello to all us DX4WIN lovers,

With the help of Jim’s app notes I was able to get DX4WIN working with MMTTY 
this morning.  Very cool...  It does everything I need except I still cannot 
click on a spot in the bandmap and have the radio stay in RTTY mode, but, 
that’s not such a big deal to me because now I can click on the call, name and 
rst of the DX station in the RTTY window and that info gets filled into the QSO 
window, that is a big deal!

I’ve been a ham for over 55 years and I’m just now discovering RTTY, hi, hi

I’ll probably stay with DX4WIN till I croak.

Dennis, k0eoo
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY with MMTTY

[Dave Perry]

I meant Alt A for adding a Spot!!!

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dave Perry
Sent: Friday, October 23, 2015 3:41 PM
To: 'RadioDen45'; 'DX4WIN Reflector'
Subject: Re: [Dx4win] RTTY with MMTTY

Dennis,

Unless the spot has RTTY in the Remarks, DX4WIN has no way of knowing which
mode to put the radio in.  In that situation it can only go by the CW Cutoff
frequency for each band that you set in Preferences and it will either
select CW or SSB.  However, you will find that if RTTY is in the remarks
section of the spot, DX4WIN will change your mode to RTTY.  So the answer to
your question is that it depends on the spot.  If you add a spot using
DX4WIN (Control A) and your radio is in RTTY mode, it will add RTTY to the
Remarks section automatically. Have fun. 

73,

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Friday, October 23, 2015 12:02 PM
To: DX4WIN Reflector
Subject: [Dx4win] RTTY with MMTTY

Hello to all us DX4WIN lovers,

With the help of Jim's app notes I was able to get DX4WIN working with MMTTY
this morning.  Very cool...  It does everything I need except I still cannot
click on a spot in the bandmap and have the radio stay in RTTY mode, but,
that's not such a big deal to me because now I can click on the call, name
and rst of the DX station in the RTTY window and that info gets filled into
the QSO window, that is a big deal!

I've been a ham for over 55 years and I'm just now discovering RTTY, hi,
hi

I'll probably stay with DX4WIN till I croak.

Dennis, k0eoo
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY with MMTTY

[Duane Calvin]

Alt-A allows you to post a spot for the station currently listed in DX4WIN.
Actually, the current method only requires that the spotter put RTTY in the
text field for the spot for DX4WIN to know it's a RTTY spot and cue your
rig.  But if you're using a Flex, and going thru N4PY's software, I'm not
sure how that works.  Since I jump around on spots from mode to mode, I'd
prefer it not ignore the mode.

73, Duane

Duane Calvin, AC5AA
Austin, Texas
ac...@ac5aa.com 


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Friday, October 23, 2015 5:22 PM
To: 'Dave Perry'; 'DX4WIN Reflector'
Subject: Re: [Dx4win] RTTY with MMTTY

Hi Dave,

I am aware of the issue with DX4WIN selecting either CW or SSB in most cases
when you click on a spot...  I was hoping there was some way Paul could shut
off that feature so the radio mode wouldn't change when clicking on a spot. 
That would solve the problem for all radios  Most people know mode they
are working so that feature wouldn't be necessary in most cases, like a RTTY
contest for example.

How do you add a spot using Alt-A?  If am using the bandmap to click on a
spot how does Alt-A figure into the picture??

Thanks for the help,

Dennis, k0eoo

-Original Message-
From: Dave Perry
Sent: Friday, October 23, 2015 3:43 PM
To: 'Dave Perry' ; 'RadioDen45' ; 'DX4WIN Reflector'
Subject: RE: [Dx4win] RTTY with MMTTY

I meant Alt A for adding a Spot!!!

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dave Perry
Sent: Friday, October 23, 2015 3:41 PM
To: 'RadioDen45'; 'DX4WIN Reflector'
Subject: Re: [Dx4win] RTTY with MMTTY

Dennis,

Unless the spot has RTTY in the Remarks, DX4WIN has no way of knowing which
mode to put the radio in.  In that situation it can only go by the CW Cutoff
frequency for each band that you set in Preferences and it will either
select CW or SSB.  However, you will find that if RTTY is in the remarks
section of the spot, DX4WIN will change your mode to RTTY.  So the answer to
your question is that it depends on the spot.  If you add a spot using
DX4WIN (Control A) and your radio is in RTTY mode, it will add RTTY to the
Remarks section automatically. Have fun.

73,

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Friday, October 23, 2015 12:02 PM
To: DX4WIN Reflector
Subject: [Dx4win] RTTY with MMTTY

Hello to all us DX4WIN lovers,

With the help of Jim's app notes I was able to get DX4WIN working with MMTTY
this morning.  Very cool...  It does everything I need except I still cannot
click on a spot in the bandmap and have the radio stay in RTTY mode, but,
that's not such a big deal to me because now I can click on the call, name
and rst of the DX station in the RTTY window and that info gets filled into
the QSO window, that is a big deal!

I've been a ham for over 55 years and I'm just now discovering RTTY, hi,
hi

I'll probably stay with DX4WIN till I croak.

Dennis, k0eoo
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY with MMTTY

[RadioDen45]

Hi Dave,

I am aware of the issue with DX4WIN selecting either CW or SSB in most cases 
when you click on a spot...  I was hoping there was some way Paul could shut 
off that feature so the radio mode wouldn't change when clicking on a spot. 
That would solve the problem for all radios  Most people know mode they 
are working so that feature wouldn't be necessary in most cases, like a RTTY 
contest for example.


How do you add a spot using Alt-A?  If am using the bandmap to click on a 
spot how does Alt-A figure into the picture??


Thanks for the help,

Dennis, k0eoo

-Original Message- 
From: Dave Perry

Sent: Friday, October 23, 2015 3:43 PM
To: 'Dave Perry' ; 'RadioDen45' ; 'DX4WIN Reflector'
Subject: RE: [Dx4win] RTTY with MMTTY

I meant Alt A for adding a Spot!!!

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dave Perry
Sent: Friday, October 23, 2015 3:41 PM
To: 'RadioDen45'; 'DX4WIN Reflector'
Subject: Re: [Dx4win] RTTY with MMTTY

Dennis,

Unless the spot has RTTY in the Remarks, DX4WIN has no way of knowing which
mode to put the radio in.  In that situation it can only go by the CW Cutoff
frequency for each band that you set in Preferences and it will either
select CW or SSB.  However, you will find that if RTTY is in the remarks
section of the spot, DX4WIN will change your mode to RTTY.  So the answer to
your question is that it depends on the spot.  If you add a spot using
DX4WIN (Control A) and your radio is in RTTY mode, it will add RTTY to the
Remarks section automatically. Have fun.

73,

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Friday, October 23, 2015 12:02 PM
To: DX4WIN Reflector
Subject: [Dx4win] RTTY with MMTTY

Hello to all us DX4WIN lovers,

With the help of Jim's app notes I was able to get DX4WIN working with MMTTY
this morning.  Very cool...  It does everything I need except I still cannot
click on a spot in the bandmap and have the radio stay in RTTY mode, but,
that's not such a big deal to me because now I can click on the call, name
and rst of the DX station in the RTTY window and that info gets filled into
the QSO window, that is a big deal!

I've been a ham for over 55 years and I'm just now discovering RTTY, hi,
hi

I'll probably stay with DX4WIN till I croak.

Dennis, k0eoo
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY

[W9RPM]

Running DX4WIN, and when I went on RTTY, and turned my KAM on I get a 
Error message that says, An exception occurred! List index out of 
bounds(-1).


Anyone know what that means, and how to fix it.

Thanks, John W9RPM

--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
DX and CONTEST CLUB: http://www.w9idx.com/
La Crosse Hams: http://www.lacrossehams.org/
AOL IM: W9RPM
YAHOO: W9RPM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY

[ROBERT DEGRIPPO]

Try running a terminal program with the kam if it works its dx4win issue.

Bob

Sent from my iPad

> On Oct 21, 2015, at 3:42 PM, W9RPM  wrote:
> 
> This message has no content.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY with PRO III and Microham USB III

[Fred - NA2U]

I'm going to keep trying this until I get it working.  I recently had a hard 
drive failure.  I reinstalled DX4WIN and reconfigured it.  I found this morning 
that I was successful in getting PSK31 to work.  Before the disk bit the dust I 
couldn't get PSK31 or RTTY to work.  One down and one to go.

Using Pro III, Microham USB III interface, have CW on Com5, CW keying on DTR, 
PTT on RTS, RTTY Comport on Com5.  Trying to use FSK (have extfsk 
installed/working).  Trying to use MMTTY in DX4WIN.  In DX4WIN, the MMTTY 
executable:  c:\HAM\mmtty\mmtty.exe
I saw a note on AD1C's website that indicated that CW and RTTY have to be on 
different com ports.  But when I try to put RTTY on com 6 I get nothing.  With 
both on com 5 the transmitter keys (and sticks on keying) but I don't appear to 
be getting any output.

I would really like to get this working.  RTTY appears to be working OK in N1MM 
program so MMTTY must be set up correctly.  What might I be missing.
 
73 and thanks!
 
Fred/NA2U
Wretched excess is just barely enough.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY with PRO III and Microham USB III

[Kostas SV1DPI]

There is a guide for every microham product and dx4win
Here is what you are looking for...
http://www.microham.com/Downloads/U3_DX4WIN_Setup.pdf

73 Kostas, SV1DPI

Στις 18/10/2013 23:07, ο/η Fred - NA2U έγραψε:

I'm going to keep trying this until I get it working.  I recently had a hard 
drive failure.  I reinstalled DX4WIN and reconfigured it.  I found this morning 
that I was successful in getting PSK31 to work.  Before the disk bit the dust I 
couldn't get PSK31 or RTTY to work.  One down and one to go.

Using Pro III, Microham USB III interface, have CW on Com5, CW keying on DTR, 
PTT on RTS, RTTY Comport on Com5.  Trying to use FSK (have extfsk 
installed/working).  Trying to use MMTTY in DX4WIN.  In DX4WIN, the MMTTY 
executable:  c:\HAM\mmtty\mmtty.exe
I saw a note on AD1C's website that indicated that CW and RTTY have to be on 
different com ports.  But when I try to put RTTY on com 6 I get nothing.  With 
both on com 5 the transmitter keys (and sticks on keying) but I don't appear to 
be getting any output.

I would really like to get this working.  RTTY appears to be working OK in N1MM 
program so MMTTY must be set up correctly.  What might I be missing.
  
73 and thanks!
  
Fred/NA2U

Wretched excess is just barely enough.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY with PRO III and Microham USB III

[Joe Subich, W4TV]

Have you looked at the example configuration for USB Interface III
and DX4Win available in microHAM Router (Help | Download Documents)
or in the USB III area at www.microHAM-USA.com/support.html?   It
contains all of the settings necessary ...

Note - with DX4Win you *must* set the CW PTT to VOX and close the CW
Keyboard to release the CW/PTT port for use by MMTTY/EXTFSK for FSK
before you can open the MMTTY Window.  Simply closing the CW Keyboard
does not seem to release the PTT (RTS).

73,

   ... Joe, W4TV


On 10/18/2013 4:07 PM, Fred - NA2U wrote:

I'm going to keep trying this until I get it working.  I recently had a hard 
drive failure.  I reinstalled DX4WIN and reconfigured it.  I found this morning 
that I was successful in getting PSK31 to work.  Before the disk bit the dust I 
couldn't get PSK31 or RTTY to work.  One down and one to go.

Using Pro III, Microham USB III interface, have CW on Com5, CW keying on DTR, 
PTT on RTS, RTTY Comport on Com5.  Trying to use FSK (have extfsk 
installed/working).  Trying to use MMTTY in DX4WIN.  In DX4WIN, the MMTTY 
executable:  c:\HAM\mmtty\mmtty.exe
I saw a note on AD1C's website that indicated that CW and RTTY have to be on 
different com ports.  But when I try to put RTTY on com 6 I get nothing.  With 
both on com 5 the transmitter keys (and sticks on keying) but I don't appear to 
be getting any output.

I would really like to get this working.  RTTY appears to be working OK in N1MM 
program so MMTTY must be set up correctly.  What might I be missing.

73 and thanks!

Fred/NA2U
Wretched excess is just barely enough.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY with PRO III and Microham USB III

[Fred - NA2U]

Yes, I did, Joe.  I'll check out your note below and let you know the outcome. 

73 from the desert,

Fred/NA2U

On Oct 18, 2013, at 2:19 PM, Joe Subich, W4TV li...@subich.com wrote:

 
 Have you looked at the example configuration for USB Interface III
 and DX4Win available in microHAM Router (Help | Download Documents)
 or in the USB III area at www.microHAM-USA.com/support.html?   It
 contains all of the settings necessary ...
 
 Note - with DX4Win you *must* set the CW PTT to VOX and close the CW
 Keyboard to release the CW/PTT port for use by MMTTY/EXTFSK for FSK
 before you can open the MMTTY Window.  Simply closing the CW Keyboard
 does not seem to release the PTT (RTS).
 
 73,
 
   ... Joe, W4TV
 
 
 On 10/18/2013 4:07 PM, Fred - NA2U wrote:
 I'm going to keep trying this until I get it working.  I recently had a hard 
 drive failure.  I reinstalled DX4WIN and reconfigured it.  I found this 
 morning that I was successful in getting PSK31 to work.  Before the disk bit 
 the dust I couldn't get PSK31 or RTTY to work.  One down and one to go.
 
 Using Pro III, Microham USB III interface, have CW on Com5, CW keying on 
 DTR, PTT on RTS, RTTY Comport on Com5.  Trying to use FSK (have extfsk 
 installed/working).  Trying to use MMTTY in DX4WIN.  In DX4WIN, the MMTTY 
 executable:  c:\HAM\mmtty\mmtty.exe
 I saw a note on AD1C's website that indicated that CW and RTTY have to be on 
 different com ports.  But when I try to put RTTY on com 6 I get nothing.  
 With both on com 5 the transmitter keys (and sticks on keying) but I don't 
 appear to be getting any output.
 
 I would really like to get this working.  RTTY appears to be working OK in 
 N1MM program so MMTTY must be set up correctly.  What might I be missing.
 
 73 and thanks!
 
 Fred/NA2U
 Wretched excess is just barely enough.
 
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Control Character functions

[Art - W6KY]

This might be what you already have, but this
is what I use...

http://www.dx4win.com/HelpVer804/index.html?packet__rtty_window__edit_func.htm

73, Art  W6KY
www.w6ky.com

 .
Red meat is not bad for you,
Fuzzy Green meat is bad for you



- Original Message 
From: wb2aiv Bill wb2...@verizon.net
To: dx4win@mailman.qth.net
Sent: Tue, August 14, 2012 10:35:13 PM
Subject: [Dx4win] RTTY Control Character functions

After some 'fiddling' I have DX4Win running RTTY using MMTTY.  My 
problem is with editing the Macro buttons and Function Keys to send the 
desired messages.  The DX4Win On-Line Help explains how to edit the 
Function Keys.  One command option is % + a capital letter to 
implement a control character.  They give an example of Crl + M for 
Carriage Return and Ctrl +C to send a CW ID in PSK but don't say what 
other control characters are available.  I've searched through the help 
file but can't find anything that describes the other 24 control 
character functions.  Can someone point me to a list?

Bill WB2AIV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY Control Character functions

[wb2aiv Bill]

After some 'fiddling' I have DX4Win running RTTY using MMTTY.  My 
problem is with editing the Macro buttons and Function Keys to send the 
desired messages.  The DX4Win On-Line Help explains how to edit the 
Function Keys.  One command option is % + a capital letter to 
implement a control character.  They give an example of Crl + M for 
Carriage Return and Ctrl +C to send a CW ID in PSK but don't say what 
other control characters are available.  I've searched through the help 
file but can't find anything that describes the other 24 control 
character functions.  Can someone point me to a list?

Bill WB2AIV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY with DX4WIN

[ALAN ZACK]

I wonder if fellow DX4WIN users would be kind enough to share how they are
using RTTY with the Yaesu FT-2000 and DX4WIN.

I have a Rig blaster pro to use as an interconnection from the PC to the
rig. Wonder if anyone has any hints or recommendations as to what program to
use, etc. Previously I worked RTTY by just using the built in programmed
messaging feature of the IC-756PROIII that I have just traded in for a
FT-2000 due to ESD problems. 

 

 

 

Alan Zack

Amateur Radio Station K7ACZ

Official USCG Auxiliary Comm Station

Las Vegas, Nevada, USA

Delta Rocket Quality Engineer, The Boeing Company, Retired

Aviation Chief Warrant Officer,  U.S. Coast Guard, Retired

 http://www.geocities.com/k7acz http://www.geocities.com/k7acz

 http://gocoastguard.com http://gocoastguard.com

 http://www.uscgradio.net http://www.uscgradio.net

 http://www.comm-one.org http://www.comm-one.org

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY with DX4WIN

[Jim Reisert AD1C]

On Sat, May 22, 2010 at 12:15 PM, ALAN ZACK k7...@cox.net wrote:

 I wonder if fellow DX4WIN users would be kind enough to share how they are
 using RTTY with the Yaesu FT-2000 and DX4WIN.

 I have a Rig blaster pro to use as an interconnection from the PC to the
 rig. Wonder if anyone has any hints or recommendations as to what program to
 use, etc. Previously I worked RTTY by just using the built in programmed
 messaging feature of the IC-756PROIII that I have just traded in for a
 FT-2000 due to ESD problems.

For software, a number of us use MMTTY.  I can't give you any hardware
tips, but here is some configuration information for DX4WIN:

http://dx4win.ad1c.us/appnotes/mmtty.htm

The most important thing is to get MMTTY working stand-alone BEFORE
you try to integrate it into DX4WIN.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY Help

[Willie]

Hello,
 
I am trying again to get DX4WIN to work with my Kenwood TS870 radio.  I am
able to get a steady tone and that is all.
 
This is my setup;
 
Radio: Kenwood 870
Interface:  Homebrew one transistor (AA5AU Website)  **
Software: Dx4WIN Ver. 8 and MMTTY Ver. 1.66G


** The interface is built to use TXD for Writelog and RTS for DX4Win.  I
make connections to the FSK input on the back of the radio.  Should the
input for DX4WIN utilize pin 3 of the ACC2 plug on the rear of the radio?

Inputs will be greatly appreciated.

Thanks,
Willie, K5DKH
 
 
 
 __
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY Window is open - can't get rid of it

[Greg Clark]

Ver 8.03 - I opened DX4WIN today and all of a sudden I have the RTTY
window open - and I can't get rid of it.  I can minimize it, but Alt F4
won't get rid of it and I can't remove it with any of the usual methods.

Any suggestions?

Thanks
Greg
K9IG
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Window is open - can't get rid of it

[Jim Reisert AD1C]

On Mon, Dec 28, 2009 at 4:59 PM, Greg Clark put...@yahoo.com wrote:

 Ver 8.03 - I opened DX4WIN today and all of a sudden I have the RTTY
 window open - and I can't get rid of it.  I can minimize it, but Alt F4
 won't get rid of it and I can't remove it with any of the usual methods.

In your RTTY preferences, change RTTY type to none.  Then restart DX4WIN.

I can't figure out how to dupliate the problem here.

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Window is open - can't get rid of it

[Greg Clark]

That was it Jim - gone now.  I've never even opened the RTTY pref tab before so 
was perplexed.  Appreciate the assist.

Greg
K9IG






From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Greg Clark g...@k9ig.com
Cc: dx4win@mailman.qth.net
Sent: Mon, December 28, 2009 7:37:08 PM
Subject: Re: [Dx4win] RTTY Window is open - can't get rid of it

On Mon, Dec 28, 2009 at 4:59 PM, Greg Clark put...@yahoo.com wrote:

 Ver 8.03 - I opened DX4WIN today and all of a sudden I have the RTTY
 window open - and I can't get rid of it.  I can minimize it, but Alt F4
 won't get rid of it and I can't remove it with any of the usual methods.

In your RTTY preferences, change RTTY type to none.  Then restart DX4WIN.

I can't figure out how to dupliate the problem here.

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Window is open - can't get rid of it

[Jim Reisert AD1C]

I can't figure how how it would have been set all of a sudden, but
I'm glad it's fixed now.

- Jim

On Mon, Dec 28, 2009 at 5:44 PM, Greg Clark put...@yahoo.com wrote:

 That was it Jim - gone now.  I've never even opened the RTTY pref tab before
 so was perplexed.  Appreciate the assist.

 Greg
 K9IG


 
 From: Jim Reisert AD1C jjreis...@alum.mit.edu
 To: Greg Clark g...@k9ig.com
 Cc: dx4win@mailman.qth.net
 Sent: Mon, December 28, 2009 7:37:08 PM
 Subject: Re: [Dx4win] RTTY Window is open - can't get rid of it

 On Mon, Dec 28, 2009 at 4:59 PM, Greg Clark put...@yahoo.com wrote:

 Ver 8.03 - I opened DX4WIN today and all of a sudden I have the RTTY
 window open - and I can't get rid of it.  I can minimize it, but Alt F4
 won't get rid of it and I can't remove it with any of the usual methods.

 In your RTTY preferences, change RTTY type to none.  Then restart DX4WIN.

 I can't figure out how to duplicate the problem here.

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY control panel opens each time I start v8.02

[Paul B. Peters]

Each time I start v8.02, the RTTY Control Panel opens with the rest of the
windows in my layout. How can I stop the RTTY panel from opening each time I
start the program?  


73 de Paul, VE7BZ  

 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY control panel opens each time I start v8.02

[David Tilley]

That's what it does in V7 as well, at least for me.  That's what it's 
supposed to do if you have MMTTY enabled.
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY control panel opens each time I start v8.02

[Jim Reisert AD1C]

On Sun, Oct 18, 2009 at 10:41 AM, Paul B. Peters ve...@shaw.ca wrote:

 Each time I start v8.02, the RTTY Control Panel opens with the rest of the
 windows in my layout. How can I stop the RTTY panel from opening each time I
 start the program?

In my station, once MMTTY window is closed, and I restart DX4WIN, the
window does not open again.  It has worked this way since 7.0x.  So I
suggest you do NOT leave MMTTY open when closing DX4WIN, and it should
not return.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY control panel opens each time I start v8.02

[Garry Shapiro]

I LIKE having the MTTY window open. Then, if a target of opportunity 
presents on RTTY, it is that much faster to engage.

Garry, NI6T

Jim Reisert AD1C wrote:
 On Sun, Oct 18, 2009 at 10:41 AM, Paul B. Peters ve...@shaw.ca wrote:

   
 Each time I start v8.02, the RTTY Control Panel opens with the rest of the
 windows in my layout. How can I stop the RTTY panel from opening each time I
 start the program?
 

 In my station, once MMTTY window is closed, and I restart DX4WIN, the
 window does not open again.  It has worked this way since 7.0x.  So I
 suggest you do NOT leave MMTTY open when closing DX4WIN, and it should
 not return.

 73 - Jim AD1C

   
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY control panel opens each time I start v8.02 - solved

[Paul B. Peters]

I think I have solved the mystery -- and must admit I feel somewhat
embarrassed about the solution. 

In a previous configuration, I must have opened the MMTTY window and at that
time the monitors were one above the other. In the current configuration,
the monitors are side-by-side. I reset the monitor position in Control
Panel to the old setup and sure enough, there was the MMTTY window (at the
top of the screen) that you'd see the call signs populate while in RTTY
mode. Some how the two RTTY screens were separated and all I was seeing was
the RTTY Control Panel. Once I found the missing window, moved it into the
centre of my main screen and clicked the X to close it all was okay. 

Thanks for your suggestions.

73 de Paul, VE7BZ

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Window Problem

[Mel]

That window was originally for a TNC... it's not really an RTTY 
window... it was for any TNC mode. If you don't have a TNC and you don't 
want to use it as a secondary Telnet session, configure it as None.


Pete Smith wrote:
 Running 7.5.04, if I have an RTTY type selected in Preferences (i.e., 
 Normal rather than None), then I always have an RTTY window on-screen.  
 It cannot be closed, only minimized, and under certain circumstances it 
 automatically restores itself.  What's going on?
 
 73, Pete N4ZR
 New Articles Daily - the Contesting Compendium at 
 http://wiki.contesting.com
 The World Contest Station Database, updated daily at 
 www.conteststations.com
 The Reverse Beacon Network at http://reversebeacon.net
 
 
 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY window won't close

[Mel]

Are you referring to the MMTTY window or the TNC window?

In the case of the TNC window, it will always open if a COM port has 
been defined.


Mike wrote:
 When DX4Win starts, the RTTY window opens, and I cannot close it.
 Am I missing a configuration setting somewhere?
 Thanks,
 Mike NF4L
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY window won't close

[Mike]

When DX4Win starts, the RTTY window opens, and I cannot close it.
Am I missing a configuration setting somewhere?
Thanks,
Mike NF4L
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY-related Question

[Howard Dickson]

Good afternoon.  I have a RTTY-related request for help.

I normally only use RTTY in contests and use N1MM as my logging 
software, and I never use the spotting cluster in RTTY contests.  That 
having been said, this past two weeks I have been desperately trying to 
work K5D on as many bands and modes as possible.  My problem is this.

When I click on a spot in DX4Win, my rig (Kenwood TS-850s) moves to the 
correct frequency (no problem) but, the rig gets set to FSK mode instead 
of LSB, which is required for RTTY when using sound-card technology to 
generate the code.  In FSK mode I can copy the other station's 
transmission just fine, but, when I try to transmit myself, the rig does 
not get keyed and so no characters are sent.  Now, if I switch my rig to 
LSB I find that I must shift a few hundred kHz in order to find that 
signal again (a major problem when there are many stations on the band 
in the immediate area) and in so doing, DX4Win sets the mode in the 
program for this QSO to SSB instead of RTTY.

My question is this - is there any way within DX4Win (Preferences 
Section) to direct MTTY key the radio, even though it is in FSK mode?  
Or, is there some other solution, like directing the radio to go to LSB 
instead of FSK mode when a station working RTTY is spotted?

Any advice would be much appreciated.

Howard Dickson - VE1DHD
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY-related Question

[ON4AOI]

Hi Howard,

You should first setup the mmtty interface that it works the way you like,
This can be done in options under setup MMTTY,

Changing rtty settings in the kenwood ts850-950 rigfile with a text editor
can
Solve the problem with fsk and lsb, but the qso will be saved like SSB not
rtty

The easiest way is to make a small interface like can be seen on my webpage
Or in the dx4win manual that is working in FSK.

Guy ON4AOI

-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Howard Dickson
Verzonden: woensdag 25 februari 2009 18:16
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] RTTY-related Question

Good afternoon.  I have a RTTY-related request for help.

I normally only use RTTY in contests and use N1MM as my logging 
software, and I never use the spotting cluster in RTTY contests.  That 
having been said, this past two weeks I have been desperately trying to 
work K5D on as many bands and modes as possible.  My problem is this.

When I click on a spot in DX4Win, my rig (Kenwood TS-850s) moves to the 
correct frequency (no problem) but, the rig gets set to FSK mode instead 
of LSB, which is required for RTTY when using sound-card technology to 
generate the code.  In FSK mode I can copy the other station's 
transmission just fine, but, when I try to transmit myself, the rig does 
not get keyed and so no characters are sent.  Now, if I switch my rig to 
LSB I find that I must shift a few hundred kHz in order to find that 
signal again (a major problem when there are many stations on the band 
in the immediate area) and in so doing, DX4Win sets the mode in the 
program for this QSO to SSB instead of RTTY.

My question is this - is there any way within DX4Win (Preferences 
Section) to direct MTTY key the radio, even though it is in FSK mode?  
Or, is there some other solution, like directing the radio to go to LSB 
instead of FSK mode when a station working RTTY is spotted?

Any advice would be much appreciated.

Howard Dickson - VE1DHD
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY PTT Keying

[Larry Gauthier (K8UT)]

Flam,

Yes, DX4Win will key PTT (and the CW port) from your PC's parallel port. 
You'll need to build a simple one transistor switch, and which will fit 
inside the hood of a 25 pin LPT plug. See either the DX4Win or the MMTTY 
Help files for excellent details. If you have a printer connected to the 
parallel port, you can still use that same port for your PTT keying.

I operate lots of RTTY with DX4Win, and clicking on packet spots sets my rig 
(an Icom) mode = RTTY only when the expression RTTY is in the spot. 
Otherwise DX4Win will usually set the mode = CW (depends on other band 
settings in the DX4Win preferences).

Sorry, but I am not familiar with the FT-1000 serial interface.

-larry
K8UT

 You wrote:

 Hi

 Just trying RTTY with dx4win + mmtty for the first time. However, Im 
 having
 a problem keying the transmitter ... .
 Is it possible to setup up Dx4Win to use software commands for PTT (OR via
 LPT port ?).
 Currently i have to change tx/rx manually :=)

 Also: QSO-Special keys CW/RTTY does not seem to work in the QSO 
 window
 when working RTTY. It unchecks itself every time i hit a function key to
 active a text macro.

 The setup is:
 COM1: WinKeyer
 COM2: FT-1000MP
 PC: older compaq (450MHz). WinXP.

 The COM2 port interface is not fully implemented (or broken) regarding
 RTS/CTS/DSR. I found this out when connecting the Winkeyer to COM2. It 
 only
 worked, when connected to COM1. Winkeyer needs theese lines for 
 powersupply.

 The radio is connected to the PC via the backpanels packet input. When
 working RTTY you put the radio in packet mode.
 Unfortunately, Dx4Win records this (correctly enough) as a PAC  QSO when
 logging. Is there any way of changing this, so RTTY is recorded ?

 I have experimented with the .RIG file and and change the mode string for
 PAC to the same string as RTTY. When i click on a RTYY spot on the
 dxcluster window - it sets the mode on the radio to PAC. However, this 
 is
 changed the next time the PC polls the radio for information, and the QSO
 mode flips back to PAC :=)

 --
 Best DX!
 OZ1AXG Flam

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RTTY Spots

[Larry Gauthier (K8UT)]

No, there is no way. Based on your settings for CW frequency cutoff under 
File Preferences QSO, any spot that does not include the text RTTY in its 
comment field will be set as either CW or phone.

-larry
K8UT
  - Original Message - 
  From: Harry Williams 
  To: dx4win 
  Sent: Monday, February 02, 2009 16:09
  Subject: [Dx4win] RTTY Spots


  I am trying out RTTY so I have configured Dx4win to interface to MMTTY and it 
all seems to work well with one small but annoying exception. It appears that 
Dx4win relies on the remarks column in cluster spots to signal RTTY and if 
there it sets the mode to RTTY and passes it on to the rig. If it is not there 
the correct mode does not appear to be set. Is there any way to force the mode 
to RTTY and have Dx4win just ignore the remarks in the spot?
   
  Thanks,
  Harry
  W0LS



--


  __
  Dx4win mailing list
  Home: http://mailman.qth.net/mailman/listinfo/dx4win
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Dx4win@mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY Spots

[Harry Williams]

I am trying out RTTY so I have configured Dx4win to interface to MMTTY and it 
all seems to work well with one small but annoying exception. It appears that 
Dx4win relies on the remarks column in cluster spots to signal RTTY and if 
there it sets the mode to RTTY and passes it on to the rig. If it is not there 
the correct mode does not appear to be set. Is there any way to force the mode 
to RTTY and have Dx4win just ignore the remarks in the spot?
 
Thanks,
Harry
W0LS__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] RTTY

[F6EXV]

Hi all
Since I got no response to my previous post, I will ask my question 
differently

As a reminder, using DX4Win v7.01, Micro Keyer II.
When I open TrueTTY, I will get an error message about the com port 
being opened already. If I close DX4Win, and just open TrueTTY, it will 
work fine on its own.

TrueTTY asks me (in the setup) for a PTT port, and a data exchange port.
The Micro Keyer is set on com6 for DX4Win.

Within TrueTTY, which port should be common, which port should be 
different so that I can run them both simultaneously ?
I do not think I can log directly from TrueTTY into DX4Win, but this is 
not the main issue at this time.
I just would like to find out how I must set all this up so that I do 
not have to close DX4Win in order to use TrueTTY


Thanks in advance
73
Paul F6EXV


___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

RE: [Dx4win] RTTY

[ON4AOI]

Paul,
There should be no common port, DX4WIN doesn´t allow that

Guy ON4AOI
 

-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Namens F6EXV
Verzonden: maandag 6 oktober 2008 13:27
Aan: DX4WIN Reflector
Onderwerp: [Dx4win] RTTY

Hi all
Since I got no response to my previous post, I will ask my question 
differently
As a reminder, using DX4Win v7.01, Micro Keyer II.
When I open TrueTTY, I will get an error message about the com port 
being opened already. If I close DX4Win, and just open TrueTTY, it will 
work fine on its own.
TrueTTY asks me (in the setup) for a PTT port, and a data exchange port.
The Micro Keyer is set on com6 for DX4Win.

Within TrueTTY, which port should be common, which port should be 
different so that I can run them both simultaneously ?
I do not think I can log directly from TrueTTY into DX4Win, but this is 
not the main issue at this time.
 I just would like to find out how I must set all this up so that I do 
not have to close DX4Win in order to use TrueTTY

Thanks in advance
73
Paul F6EXV


___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.7.6/1709 - Release Date: 5/10/2008
9:20
 

___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] Rtty What does other people use?

[Scott and Lisa Augsburger]

I was wondering what other people were using on RTTY.  I have DX4WIN 7.02.15 
and started playing around with the MTTY function this morning.  The rig I am 
using is a Icom 781 with CI-V level convertor and DX4WIN is controlling it.

I talked to West Mountain Radio this morning and he was very vag on the 
computer sizing for his equipment since he's only a equipment manufacture.

For years I used the Kantronics KAM until it bit the dust.  

Let me know off the reflector

Thanks
Scott Augsburger
wr0u
From [EMAIL PROTECTED]  Tue Oct  2 16:22:38 2007
From: [EMAIL PROTECTED] (Dave (g0vxe))
Date: Tue Oct  2 16:27:00 2007
Subject: [Dx4win] Signalink usb and dx4win
Message-ID: [EMAIL PROTECTED]

Hi All 
is anyone using signalink usb with dx4win. 
I cannot use it unless I change it to default sound card. 
it does not come up in the drop menu in pref/ control/psk sound card.
only sound card 0 1 2 and 3.

any help. I am also struggling with mmtty also.. but I have not used that 
programme before so 
I don't know my way around it.
All The Best
g0vxe
Dave
From [EMAIL PROTECTED]  Tue Oct  2 17:58:08 2007
From: [EMAIL PROTECTED] (Mark A. Weiss)
Date: Tue Oct  2 18:03:03 2007
Subject: [Dx4win] FT-450 + DX4WIN
Message-ID: [EMAIL PROTECTED]

Does anyone know which radio 'Preference' item works best for the FT-450?

Tnx  73,

Mark, K6FG

[Dx4win] rtty with sound card

[Jim Reisert AD1C]

--- Ricardo Navarrete [EMAIL PROTECTED] wrote:

 Is it possible??? Can i make RTTY with DX4WIN and Sound Card or i'm
 dreaming

If you have DX4WIN 7.0x, you interface with the MMTTY software.  

You can get MMTTY from:

http://mmhamsoft.amateur-radio.ca/

Download the FULL version of MMTTY and get that working first.  Then setup
DX4WIN to work with MMTTY by reading the on-line help.  I have some information
on this web page, but not very much:

http://dx4win.ad1c.us/appnote9.htm

73- Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Thu Jan 18 14:36:01 2007
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Thu Jan 18 14:37:16 2007
Subject: [Dx4win] Error on comport
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

John, go into your preferences and make sure that on the CW tab, External
keyer (Port) is not set to COM3.

73 - Jim AD1C

--- n4dsp [EMAIL PROTECTED] wrote:

 Each time I reboot 2 error messages pop up stating
 could not open com3 for keying: ie_BadId-Specified
 Comport doesn't exist.
 
 Anyone know how I can eliminate this error message. Nothing is connected to 
 comport 3. Thanks for taking the time for reading this.


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Thu Jan 18 14:54:52 2007
From: [EMAIL PROTECTED] (Josep)
Date: Thu Jan 18 14:56:55 2007
Subject: [Dx4win] rtty with sound card
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

So, do I understand that?s possible..? Just need to connect my radio to PC 
via a common interface..? I got a G4ZLP interface, will this work..? 
Thank?s.!

Josep
EA6BF


- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]
To: Ricardo Navarrete [EMAIL PROTECTED]; 
Sent: Thursday, January 18, 2007 7:29 PM
Subject: Re: [Dx4win] rtty with sound card


--- Ricardo Navarrete [EMAIL PROTECTED] wrote:

 Is it possible??? Can i make RTTY with DX4WIN and Sound Card or i'm
 dreaming

If you have DX4WIN 7.0x, you interface with the MMTTY software.

You can get MMTTY from:

http://mmhamsoft.amateur-radio.ca/

Download the FULL version of MMTTY and get that working first.  Then setup
DX4WIN to work with MMTTY by reading the on-line help.  I have some 
information
on this web page, but not very much:

http://dx4win.ad1c.us/appnote9.htm

73- Jim AD1C

[Dx4win] rtty with sound card

[Jim Reisert AD1C]

--- Josep [EMAIL PROTECTED] wrote:

 So, do I understand that?s possible..? Just need to connect my radio to PC 
 via a common interface..? I got a G4ZLP interface, will this work..? 

For help with the MMTTY software, please try this group.  They can answer your
interface questions:

   http://groups.yahoo.com/group/MM-HAMSOFT/

Once you have MMTTY working by itself, then come back here if you need help
with DX4WIN.

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Thu Jan 18 19:09:27 2007
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Thu Jan 18 19:10:43 2007
Subject: [Dx4win] Stupid DX4WIN tricks
Message-ID: [EMAIL PROTECTED]

Did you know that you could right-click on the SunRise/Set window, choose Sun
Rise/Set by Date, and get a list of countries that share gray line with you?

As Johnny Carson might say, I did not know that!

I discovered this by accident!

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Thu Jan 18 19:39:45 2007
From: [EMAIL PROTECTED] (Bob Garceau)
Date: Thu Jan 18 19:41:01 2007
Subject: [Dx4win] Stupid DX4WIN tricks
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

It's like finding the hidden cheat codes in video games.

Bob, W1EQ


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Jim Reisert AD1C
Sent: Thursday, January 18, 2007 7:09 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Stupid DX4WIN tricks

Did you know that you could right-click on the SunRise/Set window, choose
Sun
Rise/Set by Date, and get a list of countries that share gray line with you?

As Johnny Carson might say, I did not know that!

I discovered this by accident!

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY

[Henrik Klüver Møller]

Hi

I have a little problem working MMTTY. The window RTTY control panel 
disappear behind the other windows  as soon I start writing a massage or 
start writing in the log window???

(I am a new user of DX4WIN)  -  Hope for some help.

vy 73 de OZ6TL - Henrik

[EMAIL PROTECTED]

Fw: [Dx4win] RTTY

[Henrik Klüver Møller]

problem fixed!!!

73 Henrik

- Original Message - 
From: Henrik Kl?ver M?ller [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Friday, December 29, 2006 2:55 PM
Subject: [Dx4win] RTTY


 Hi

 I have a little problem working MMTTY. The window RTTY control panel
 disappear behind the other windows  as soon I start writing a massage or
 start writing in the log window???

 (I am a new user of DX4WIN)  -  Hope for some help.

 vy 73 de OZ6TL - Henrik

 [EMAIL PROTECTED]


 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win

Fw: [Dx4win] RTTY

[Jim Reisert AD1C]

At 10:45 AM 12/29/2006, Les Kalmus W2LK asked:

How did you fix it?

Henrik sent me a screen shot. He just moved windows around until 
everything fit

I have a little problem working MMTTY. The window RTTY control panel
disappear behind the other windows  as soon I start writing a massage or
start writing in the log window???


-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

[Dx4win] RTTY pop up window

[KR4DA]

When the RTTY pop up window is UP.
When the KEYS at the bottom are populated with

X%M  KR4DA  %D why does only the
X%M KR  is all that showes.
BUT the KEY can be expanded wider YET the text remains the same
X%M KR  WHY does the rest of the TEST   4DA %M not show up?

-- 
de KR4DA Bob Middleburg, FL
HK0/KR4DA J79DA FG/KR4DA

[Dx4win] RTTY pop up window

[Dan Violette]

From the top of my head since at work here.  Follow the command with a 
vertical bar | and what you want the key to say such as X%M  KR4DA  
%D|KR4DA.  Dan KI6X

-Original Message-
From: KR4DA [EMAIL PROTECTED]
Sent: Oct 24, 2006 10:53 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] RTTY pop up window

When the RTTY pop up window is UP.
When the KEYS at the bottom are populated with

X%M  KR4DA  %D why does only the
X%M KR  is all that showes.
BUT the KEY can be expanded wider YET the text remains the same
X%M KR  WHY does the rest of the TEST   4DA %M not show up?

-- 
de KR4DA Bob Middleburg, FL
HK0/KR4DA J79DA FG/KR4DA



___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY

[Dennis Mowers]

Does DX4WIN support FSK keying via a COM port? 

I have it running with a sound card to MIC connection, but when I look 
at the MMTTY setup Misc tab, the COM-TxD area is greyed out.  It looks 
like AFSK may the only way to run RTTY.

Thanks, Dennis


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.2.5/284 - Release Date: 3/17/2006

[Dx4win] RTTY

[Anders Janis SM4RNA]

U need to use EXTFSK check http://mmhamsoft.ham-radio.ch/extfsk.htm

/Anders


- Original Message - 
From: Dennis Mowers [EMAIL PROTECTED]
To: dx4win dx4win@mailman.qth.net
Sent: Sunday, March 19, 2006 2:29 AM
Subject: [Dx4win] RTTY


 Does DX4WIN support FSK keying via a COM port? 
 
 I have it running with a sound card to MIC connection, but when I look 
 at the MMTTY setup Misc tab, the COM-TxD area is greyed out.  It looks 
 like AFSK may the only way to run RTTY.
 
 Thanks, Dennis
 
 
 -- 
 No virus found in this outgoing message.
 Checked by AVG Free Edition.
 Version: 7.1.385 / Virus Database: 268.2.5/284 - Release Date: 3/17/2006
 
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win
From [EMAIL PROTECTED]  Sat Mar 18 20:51:34 2006
From: [EMAIL PROTECTED] (dave)
Date: Sat Mar 18 20:54:50 2006
Subject: [Dx4win] World map help (version 5.03)
Message-ID: [EMAIL PROTECTED]

Hello all,

I'm a long time user of version 5.03 and have somehow mis-configured
something. I am getting ready to do a show-n-tell of this software next week
to a local DX and contesting club I belong to. One of the things I wanted to
show off was the world map, and how it can show the path your signal took to
get there. This is especially enlightening when working someone over the
pole.

However, even though my latitude and longitude are set correctly in my
preferences, my signal path is being shown as originating from Greenland
instead of NY!

Any help would be appreciated.

Dave, N2CK

[Dx4win] RTTY

[Jim Reisert AD1C]

At 08:29 PM 3/18/2006, Dennis Mowers wrote:

Does DX4WIN support FSK keying via a COM port?
I have it running with a sound card to MIC connection, but when I 
look at the MMTTY setup Misc tab, the COM-TxD area is greyed 
out.  It looks like AFSK may the only way to run RTTY.

Use the MMTTY stand-alone version.  Get that version working first by 
itself in FSK as you desire.

Then it should just work in DX4WIN.  You do not specify the COM 
port in DX4WIN, only in MMTTY.

I am running it FSK and it works fine.

73 - Jim AD1C


-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

[Dx4win] RTTY setup information for v7.01

[Paul B. Peters, VE7BZ]

For RTTY contesting I use N1MM and the MMTTY engine. I operate in AFSK mode
via my sound card interface and everything works great. I have a Mark V
dedicated to RTTY so everything stays connected all the time on that radio.
These statements are simply to acknowledge that I've got RTTY going and I
have experience with the program -- so no problems with the basic setup.

However -- I've just upgraded DX4WIN from v6.02 to v7.01 because it supports
RTTY with the MMTTY engine. I'm excited to be able to do everyday RTTY work
using DX4WIN, but it appears that I need a little help to get the program
going properly. Could someone who has RTTY running successful in DX4WIN
v7.01 please reply to the following questions. 
 
1. Where do I tell DX4WIN that I'm keying RTTY via a soundcard interface?
 
2. Where do I see the special keys for RTTY referred to in the QSO tab of
the log entry window?
 
3. Where do I see or find the F1... Fx macro keys referred to in the Edit
Function Keys portion of the help file?
 
4. Does making changes to any of the MMTTY parameters for use within DX4WIN
affect MMTTY for use with other programs that also utilize the engine, i.e.
N1MM?
 
5. Do you have a cheat sheet for RTTY setup information for use within
DX4WIN?
 
 
I will certainly appreciate any offers of assistance.   

73 de Paul, VE7BZ
StoneyGround Station
||**||**||**||**||**||**||**||**||
 
 
From [EMAIL PROTECTED]  Mon Mar 13 10:10:37 2006
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Mon Mar 13 10:12:48 2006
Subject: [Dx4win] RTTY setup information for v7.01
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

--- Paul B. Peters, VE7BZ [EMAIL PROTECTED] wrote:
 
 1. Where do I tell DX4WIN that I'm keying RTTY via a soundcard interface?

Preferences, RTTY tab.  Put the full path to MMTTY.EXE in the last line of the
window and save.

Then in your QSO window, use Window - MMTTY to bring up the RTTY window with
MMTTY interface.

 2. Where do I see the special keys for RTTY referred to in the QSO tab of
 the log entry window?

See #1 above.

 3. Where do I see or find the F1... Fx macro keys referred to in the Edit
 Function Keys portion of the help file?

See #1 above.

 4. Does making changes to any of the MMTTY parameters for use within DX4WIN
 affect MMTTY for use with other programs that also utilize the engine, i.e.
 N1MM?

DX4WIN does not change any of the MMTTY parameters itself.  It's all done
through the mini MMTTY control window.

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Mon Mar 13 15:25:58 2006
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Mon Mar 13 15:28:14 2006
Subject: [Dx4win] How much QSL manager data is useful?
Message-ID: [EMAIL PROTECTED]

Hi Folks,

Before I started working on the DX4WIN QSL manager database, there were about
6,600 records.  Today it's getting close to 30,000 records.

Some people sent me their DX4WIN.CTY files so I could merge the data into the
master file.  Some of them had over 100,000 QSL manager records.  I assume they
loaded one of the databases like ON6DP or OZ7C (I think there was an Italian
one floating around as well).  I threw these records out.  I tend not to trust
the BIG databases because they tend to have a high error rate (on the order of
10%).

I just did a little experiment with the ON6DP database:

In my log of over 70,000 QSOs (going back to 1975), about 1/2 the DX (non-USA)
QSOs (not calls) do not have QSL managers listed.  If I remove the calls
unlikely to have managers (i.e. fixed stations like G3, OH2, SM5, etc.), this
reduces to 7,760 QSOs with possible unknown managers.  I then assigned QSL
managers from the ON6DP database, and found that 2,500 QSOs had managers listed
that are NOT listed in the DX4WIN QSL manager database.

What does all this mean?  Based on my log alone, the database needs to grow
another 10% in order to assign missing QSL managers to my log.

Where is all this leading:

- Do you want a large QSL manager database in DX4WIN or a smaller one?

- Is quality or quantity more important?  If you're unsure if the route is
good, you could always look it up somewhere else?

- Do you want only recent managers (i.e. going back to the last 10 years), or
something that goes back 20 or 30 years or even more?

- Do you not even care, because you use the GOLIST or QRZ.COM or another means
for finding QSL manager information?

Just some things to think about.

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Mon Mar 13 18:03:34 2006
From: [EMAIL PROTECTED] (Wayne N5WD)
Date: Mon Mar 13 19:10:26 2006
Subject: [Dx4win] How much QSL manager data is useful?
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]



On Mon, 13 Mar 2006 12:25:58 -0800 (PST), Jim Reisert AD1C wrote:
  snip
?- Do you want a large QSL

[Dx4win] RTTY F KEYS AND COM PORT

[Richard Zalewski]

Question 1- My F keys will not send the message but I can send from keyboard
Question 2- (Maybe related to #1)When I key an F key I get a message
An exception occured- Device already open.

I have the keying for RTTY on Com2.  I used to also have the keying
for CW on Com2 but found that won't work even if I only have one of
the windows open at a time.  So now if I want RTTY I have to set CW to
Comm- None.

--
Tnx es 73
Dick W7ZR
www.w7zr.com
From [EMAIL PROTECTED]  Tue Feb 14 12:37:50 2006
From: [EMAIL PROTECTED] (Floyd Sense)
Date: Tue Feb 14 12:38:20 2006
Subject: [Dx4win] {Spam?} re: MMTTY
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

If you put %X at the start of the message it will key the PTT line and send 
the message.

73, K8AC

- Original Message - 
From: Rick Craig [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Tuesday, February 14, 2006 10:28 AM
Subject: [Dx4win] {Spam?} re: MMTTY


 I'm also having problems getting MMTTY to work with DX4Win.  According to 
 the
 help file, hitting F1 through F8 should key the transmitter and send the
 message.
 When I try it, it doesn't key the transmitter but does que the message so
 when I
 hit F11, the transmitter keys and the message goes out.  Am I missing a 
 special
 character at the front of the message that will key the transmitter?  I
 couldn't find
 anything in the help file that would give me a clue.

 Thanks, Rick, N6ND
 n6nd at arrl dot net


 -- 
 This message has been scanned for viruses and
 dangerous content by MailScanner, and is
 believed to be clean.
 MailScanner thanks transtec Computers for their support.
 Please contact [EMAIL PROTECTED] if you have
 questions about this email.

 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win
 

[Dx4win] RTTY F KEYS AND COM PORT

[Floyd Sense]

Never tried that before, but did after seeing your question.  I use COM2 for 
RTTY and so set up COM2 for CW as you have.  With no MMTTY window open, I 
can send CW just fine from the window.  If I then open the DX4WIN MMTTY 
window, MMTTY will not key the COM2 interface under any conditions - using 
the TX key in MMTTY or any of the message buffers.  As you said, the CW 
window doesn't have to be open at the time for this to be a problem.  I also 
have to set the CW port to NONE in order for MMTTY to work properly on the 
same COM port.

I just recently upgraded to DX4WIN 7.01 to check out the MMTTY 
implementation.  I was disappointed to see that the macro buttons that 
normally appear at the left of the signal displays is not present when using 
MMTTY from within DX4WIN.  Guess that's a casualty of the way MMTTY 
implemented the interface.

73, K8AC

- Original Message - 
From: Richard Zalewski [EMAIL PROTECTED]
To: REFLECTOR dx4win dx4win@mailman.qth.net
Sent: Tuesday, February 14, 2006 11:02 AM
Subject: [Dx4win] RTTY F KEYS AND COM PORT


Question 1- My F keys will not send the message but I can send from keyboard
Question 2- (Maybe related to #1)When I key an F key I get a message
An exception occured- Device already open.

I have the keying for RTTY on Com2.  I used to also have the keying
for CW on Com2 but found that won't work even if I only have one of
the windows open at a time.  So now if I want RTTY I have to set CW to
Comm- None.

--
Tnx es 73
Dick W7ZR
www.w7zr.com
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY F KEYS AND COM PORT

[Jim Reisert AD1C]

(Pink) Floyd K8AC wrote:

I just recently upgraded to DX4WIN 7.01 to check out the MMTTY 
implementation.  I was disappointed to see that the macro buttons that 
normally appear at the left of the signal displays is not present when using 
MMTTY from within DX4WIN.  Guess that's a casualty of the way MMTTY 
implemented the interface.

Works the same way with Writelog.  You get a minimalist MMTTY window.
 
-- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

[Dx4win] RTTY, Rigblaster, microHam, etc.

[Jay Sewell]

To get MMTTY rinning FSK within DX4WIN  using MicroHAM interface.

My rig is ICOM, the following settings may work for other rigs, but I have
no experience with the others.

Radio cabling according to the MicroHam interface setup.
 
Assuming you have MMTTY running stand-alone and correctly PTT keying the
transmitter and sending FSK when your rig is in RTTY mode running through
the MicroKEYER.Get that set up first and running properly and then
don’t change anything in MMTTY.  Then close MMTTY
 
SETTINGS:

MicroKEYER
 Virtual Port menu, create COM3 COM4 and  COM5
 Device menu:  load template for DX4WIN
 Then set
  Control  COM3
  FSK COM5   
  CW  COM4 DTR
  PTT  COM5 RTS
then Preset menu
 SAVE AS, and name it DX4WIN
A button will appear at the bottom of the MicroKEYER screen that will allow
you to recall the above settings.  You can do the same for MMTTY
stand-alone or other programs you use.  If you make any further changes
remember to save it again.
 
Differently numbered COM ports may be used if needed to avoid conflict with
your computer's hardwired COM ports, but the numbers used above must match
those below.
 
 In DX4WIN
File,  Preferences,  
   Radio Tab:   
  Set radio type to your radio, 
  COM port to COM3
Control Tab
 CW keying/PTT control
  Interface COM4   
  DTR line CW keying
  RTS line PTT control   
RTTY tab
   RTTY Interface:  TYPE  None
   MMTTY at bottom set path to mmtty.exe
 Save settings
 
Open the MMTTY window within DX4WIN then from within MMTTY window hit Alt-S
which will call up a small window named MMTTY keying setup
   Set PTT CONTROL and in key line click RTS
   (Don’t set a COM port in this window)
 
73,  Jay  W5SL


 [Original Message]
 From: Jim Reisert AD1C [EMAIL PROTECTED]
 To: dx4win@mailman.qth.net
 Date: 11/30/2005 1:14:15 PM
 Subject: [Dx4win] RTTY, Rigblaster, microHam, etc.

 There have been many queries on the reflector lately about using blah-blah
 interface with DX4WIN for RTTY and/or PSK.

 It seems like we need some sort of cookbook for these devices:

 - Rigblaster
 - microHam
 - others?

 ... running this software

 - MMTTY
 - MIXW
 - others?

 ... for these modes:

 - RTTY
 - PSK and other audio FSK modes
 - others?

 ... on these radios:

 - ICOM
 - Kenwood
 - Ten Tec
 - Yaesu
 - others?

 What kind of information do people need and how should it be presented? 
I'd be
 happy to host a web page for this stuff, but I don't have the
information.  If
 you have the info or need the info, please respond to the reflector so we
can
 create some sort of standard template for the information.

 73 - Jim AD1C


 --
 Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY, Rigblaster, microHam, etc.

[Jim Reisert AD1C]

There have been many queries on the reflector lately about using blah-blah
interface with DX4WIN for RTTY and/or PSK.

It seems like we need some sort of cookbook for these devices:

- Rigblaster
- microHam
- others?

... running this software

- MMTTY
- MIXW
- others?

... for these modes:

- RTTY
- PSK and other audio FSK modes
- others?

... on these radios:

- ICOM
- Kenwood
- Ten Tec
- Yaesu
- others?

What kind of information do people need and how should it be presented?  I'd be
happy to host a web page for this stuff, but I don't have the information.  If
you have the info or need the info, please respond to the reflector so we can
create some sort of standard template for the information.

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Wed Nov 30 15:39:23 2005
From: [EMAIL PROTECTED] (Lefor, Alan, M.D., MPH)
Date: Wed Nov 30 15:46:44 2005
Subject: [Dx4win] backup to network drive
Message-ID: [EMAIL PROTECTED]

Im very new to DX4WIN. 

 

Is there a way to backup the log to a specified directory, like a network
drive? 

 

73s

Alan




Important Warning: This message is intended for the use of the person or
entity to which it is addressed and may contain information that is
privileged and confidential, the disclosure of which is governed by
applicable law.  If the reader is not the intended recipient, or the
employee or agent responsible for delivering it to the intended recipient,
you are hereby notified that any dissemination, distribution or copying of
this information is STRICTLY PROHIBITED. 

 If you have received this message in error, please notify us immediately,
by calling (310) 423-6428 -- and destroy the related message.  Thank You for
your cooperation.  

  
From [EMAIL PROTECTED]  Wed Nov 30 16:16:19 2005
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Wed Nov 30 16:17:33 2005
Subject: [Dx4win] backup to network drive
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]



--- Lefor, Alan, M.D., MPH [EMAIL PROTECTED] wrote:

 Im very new to DX4WIN. 
 
 Is there a way to backup the log to a specified directory, like a
 network drive? 

Through DX4WIN directly? No.

However, I have been using Iomega Automatic Backup for years with great
results.  It will back up files (or directories) any time they change
to any device with a drive letter (could be local or network).

I'm not sure what the story is with this software, 1.0.2 has been
around for a long time, I found references to version 3.30 but don't
know anything about this.

73 - Jim AD1C




--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

[Dx4win] RTTY Macros

[Bill]

Paul

Yes it is in addition. 

I must admit that I am not a great fan of digi modes. 
RTTY can be fun when in the mood but psk is a big 
yawn. As a result I don't use them very often and so I 
am in danger of not knowing what I'm talking about (no 
change there then).

There are 2 banks of macros giving 16 in total. I've left 
them populated more or less as they arrived when I 
downloaded the update to 7.01. I just edited the 
details.

I have 3 modes of operating - normal qso, dipping into 
contests for dx and rubber stamp dx. The normal qso 
is well catered for by the 2 banks of macros. However I 
could do with another bank of 8 to take care of 
contests and dx.

Has anyone else asked for this?

73
Bill

On 4 Oct 2005 at 0:02, Paul van der Eijk wrote:

 Bill,
 
 Is this in addition to the macros you get with the Ctrl+ key?
 
 --Paul
 
 At 05:00 PM 10/2/2005, Bill wrote:
 Hi
 
 Any chance of adding another row of macros? It would 
 be really useful.
 
 73
 
 Bill
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win 
 
 
 Paul van der Eijk (KK4HD)
 [EMAIL PROTECTED]
 http://www.dx4win.com
 
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win
 --
 This email has been verified as Virus free
 Virus Protection and more available at http://www.plus.net

[Dx4win] RTTY Window and RigBlaster

[J. F. Samuels]

John, a more accurate answer to your question might be, No, because the 
RTTY window only sends and receives character data.  It was supposed to be 
used with a hardware TNC, such as a KAM, which does the encoding and 
decoding work.  I use the window that way.

The alternative method is to use a software package, such as MMTTY or MixW, 
to do the sound-to-digital and vice-versa conversions.  Then the RTTY window 
is not used, since those packages have their own windows.  The newest 
version of DX4WIN has integrated support for MMTTY, I am told.

Larry, I would be interested in your jumper settings and connections for 
your setup --please post them.

73, John, K2CIB

RigBlasterPro, TS-870, KAM+, Rotor control, etc.


-
Message: 6
Date: Wed, 5 Oct 2005 17:24:45 -0400
From: Larry Gauthier (K8UT) [EMAIL PROTECTED]
Subject: Re: [Dx4win] Rigblaster
To: John Kjos [EMAIL PROTECTED]
Cc: dx4win@mailman.qth.net
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
reply-type=response

John,

I use the RIGblaster Plus with an Icom 756 ProIII, DX4Win 7.01, MMTY in FSK,
and a WaveNode wattmeter (LPT port interface). I operate phone, CW, RTTY,
and PSK modes, and it works well _AFTER_ spending a lot of time messing
around with the internal jumpers. I can switch between modes instantly
without any reconfiguration or switch flipping -- accomplished only by using
2 serial and two parallel ports.

- first serial port for rig control
- second serial port for MMTTY transmit control
- first parallel LPT port for rotor control
- second parallel port for CW keying and Wavenode wattmeter interface

If you decide to go with a RIGblaster Plus, let me know -- I'd be happy to
share the document I wrote that describes the correct settings in the RB
Plus. (( I do not know if those would translate into equal success with a
straight RIGblaster))

-larry
K8UT
- Original Message - 
From: John Kjos [EMAIL PROTECTED]
To: DX4WIN dx4win@mailman.qth.net
Sent: Wednesday, October 05, 2005 15:38
Subject: [Dx4win] Rigblaster


 Hi again, Is anyone using a Rigblaster with DX4WIN, being able use the
 RTTY window in DX4WIN? I have been thinking about getting one. Thanks-
 John
 EMAIL: [EMAIL PROTECTED]
 WEBPAGE: http://www.w9rpm.com/
 AOL IM: W9RPM
 

[Dx4win] RTTY function keys (7.01)

[Tibor M. Blum - IK2SAI]

Hy everybody.

After having set al the RTTY (MMTTY) macro I founded that something is
wrong with the label of each macro. The orizontal available space (from
left to right) is less than half of the screen and while you can change the
width of each key you can't modify the overall length.

It is something that should be happened many hears ago with the packet or cw
window, just can't remember.

It is happening just to me (Athlon 1GHz + 640RAM +win XP) or is a bug?

 

After that I re-email my problem with the qso input window when I am
connected with the cluster: I have no answer about that. Is it possible I am
alone???

I'm running a TS2000X controlled by the ARCP software.

(dx4win is not engaged to control the radio being the ARCP much more
versatile than dx4win on this regard) The band and /or mode change any time
I receive a spot via the cluster and it drive me creazy tring to run the
contest or even searching and pounching on the band. Each time I must check
that all is ok. Some time after having properly set the mode, tring to set
the band, receiving a spot I must return to set again the band. Band an mode
are stable only if I insert a callsign in the call field.

 

Tibor, IK2SAI

[Dx4win] RTTY function keys (7.01)

[ON4AOI]

Bandswitching problem when spots arrive
===
You're not alone having this problem Tibor, I reported this to Paul
Last week and got confirmation that this will be fixed next 7.0x
release
 


73 Guy ON4AOI

BAND DECODER and related stuff at

http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at

http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B  RITTY CW  RTTY interfaces at

 http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at

http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at

http://www.on4aoi.be/dxt.htm

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Tibor M. Blum - IK2SAI
Sent: Friday, June 03, 2005 3:58 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] RTTY function keys (7.01)

Hy everybody.

After having set al the RTTY (MMTTY) macro I founded that something is
wrong with the label of each macro. The orizontal available space (from
left to right) is less than half of the screen and while you can change the
width of each key you can't modify the overall length.

It is something that should be happened many hears ago with the packet or cw
window, just can't remember.

It is happening just to me (Athlon 1GHz + 640RAM +win XP) or is a bug?

 

After that I re-email my problem with the qso input window when I am
connected with the cluster: I have no answer about that. Is it possible I am
alone???

I'm running a TS2000X controlled by the ARCP software.

(dx4win is not engaged to control the radio being the ARCP much more
versatile than dx4win on this regard) The band and /or mode change any time
I receive a spot via the cluster and it drive me creazy tring to run the
contest or even searching and pounching on the band. Each time I must check
that all is ok. Some time after having properly set the mode, tring to set
the band, receiving a spot I must return to set again the band. Band an mode
are stable only if I insert a callsign in the call field.

 

Tibor, IK2SAI

___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] rtty

[Larry Gauthier (K8UT)]

Don,

The following is part of an email exchange I had with WK6F about 18 months 
ago. He was able to get his KAM plus working with DX4WIN (using the null 
serial cable route) by using these control sequences.

Hope this helps you also,

-larry
K8UT

-Original Message-
From: Larry Gauthier (K8UT) [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 29, 2003 03:42
To: [EMAIL PROTECTED]
Subject: Re: [MMTTY] KAM emulation


Ken,

I use MMTTY in TNC241 emulation mode... primarily because that's what I
could get to work with my DX4WIN logging program. (I run MMTTY and DX4WIN
within one computer, with null modem software, so that they talk to each
other with a virtual null modem cable).  Disclaimer: I know nothing about
KAM's cmd control codes -- but this is what happened when I hacked around
with it --

As an experiment, I switched to KAM emulation. MMTTY sent the following
screen and prompt to DX4WIN...
=
MMTTY Ver1.64 (C) JE3HHT 2000-2003.
TNC emulation.
Command 'RTTY'
To RX:Ctrl+C,R
To TX:Ctrl+C,T

cmd:
=
From that cmd: prompt, if I type RTTYenter I get a -RTTY 45-
response from MMTTY. Then, if I type ctrl+CR, receive character begin
arriving in the emulation receive window. If I type ctrl+CT the software
kicks MMTTY into transmit mode and send whatever characters are in the
outbound buffer. I can then toggle back-and-forth between rcv and xmt by
using those control codes. If I type ctrl+CX, MMTTY halts emulation and
returns to the cmd: prompt.

Not sure if this helps you or not -- but if you have some specific tests
you would like me to try send me an email off-line and we can hack at it.

-larry
K8UT
=== 
From [EMAIL PROTECTED]  Mon May 30 08:34:49 2005
From: [EMAIL PROTECTED] (Roger Borowski)
Date: Mon May 30 08:46:11 2005
Subject: [Dx4win] rtty
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

Don, With the KAM or KAMPlus in the terminal mode,
at the command prompt, you type RTTY + Enter to get the KAM into the RTTY
mode.
Then %CT%M is the command for putting the TNC into the Transmit mode,
and %CE is the command to return to the Receive mode. You can program a
couple of function keys to do this for you, so you can just use one of the F
keys to TX and another to RX. I think this is what you are looking for?
73, -=Rog-K9RB=-
(312 DXCC entities now on RTTY here w/DX4WIN + KAMPlus TNC)

- Original Message - 
From: Don Taylor [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Friday, May 27, 2005 2:33 PM
Subject: [Dx4win] rtty


Can any one tell me how to get rtty to tx useing a kam . Not mmtty, There is
a command in the edit function keys to turn on the transmitter and to turn
it off. I can't rember what it is
Thanks
Don
W0DET
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] rtty

[Roger Borowski]

My pleasure, Don. Happy Memorial Day! 
Glad to hear you've got it working now. 
Enjoy  73, -=Rog-K9RB=-

Subject: Re: [Dx4win] rtty


Thanks for the reply Roger.
Those were the commands I could not remember and as soon as I sent the
message I found the page with that info on it and I got it working...
So again thanks.
Don W0DET

[Dx4win] RTTY

[Pete Smith]

At 04:12 PM 9/12/2004, Kostas SV1DPI wrote:

Please add me to the list also...

I work a computer with xp  i can't run the mmtty right because ptt and radio
control is in same port.
dx4win learned me abt psk but i am not satisfied with it now. I think that
decoding is much worst from first time. Digipan is much much better.
I use writelog for contests and i love dx4win but it was a big
dissapointment for me that 603 had not mmtty.

MMTTY's author does permit his code to be used in any problem that was 
sold, rather than offered as freeware.  This is why it can be used in N1MM 
Logger, but not in DX4WIN.  In the case of Writelog, one of the Writelog 
users wrote a bridging program that permits Writelog to talk to 
MMTTY.  In my opinion, this violates the intent of MMTY's restriction, but 
they seem to be comfortable doing it this way.

73, Pete N4ZR
The World HF Contest Station Database
was updated on August 2, 2004
2753 contest stations at
www.pvrc.org/WCSD/WCSDsearch.htm  

[Dx4win] RTTY

[Joe - WDØM]

N1MM Logger requires (as do other programs incorporating MMTTY) that the 
RTTY program be downloaded separately, rather then being distributed along 
with the logging program, then installed separately.  This does NOT violate 
the intent of MMTTY's author.  How you use the freeware program is up to 
you.  Providing use of the freeware program to port data to another program 
is a different issue, IMHO.

73
Joe
WD?M


At 06:39 AM 9/13/2004, Pete Smith wrote:
At 04:12 PM 9/12/2004, Kostas SV1DPI wrote:

Please add me to the list also...

I work a computer with xp  i can't run the mmtty right because ptt and radio
control is in same port.
dx4win learned me abt psk but i am not satisfied with it now. I think that
decoding is much worst from first time. Digipan is much much better.
I use writelog for contests and i love dx4win but it was a big
dissapointment for me that 603 had not mmtty.

MMTTY's author does permit his code to be used in any problem that was 
sold, rather than offered as freeware.  This is why it can be used in N1MM 
Logger, but not in DX4WIN.  In the case of Writelog, one of the Writelog 
users wrote a bridging program that permits Writelog to talk to 
MMTTY.  In my opinion, this violates the intent of MMTY's restriction, but 
they seem to be comfortable doing it this way.

73, Pete N4ZR

[Dx4win] RTTY

[Pete Smith]

At 09:42 AM 9/13/2004, Joe - WD?M wrote:

N1MM Logger requires (as do other programs incorporating MMTTY) that the 
RTTY program be downloaded separately, rather then being distributed along 
with the logging program, then installed separately.  This does NOT 
violate the intent of MMTTY's author.  How you use the freeware program is 
up to you.  Providing use of the freeware program to port data to another 
program is a different issue, IMHO.


That may be, but my impression was that DX4WIN integrated a .dll for PSK 
into the program itself, and that THAT would be a violation of MMTTY's 
restriction.  Or perhaps MMTTY has changed their language since I last 
researched this several years ago.


73, Pete N4ZR
The World HF Contest Station Database
was updated on August 2, 2004
2753 contest stations at
www.pvrc.org/WCSD/WCSDsearch.htm  

[Dx4win] RTTY

[Jim Reisert AD1C]

--- Pete Smith [EMAIL PROTECTED] wrote:

 That may be, but my impression was that DX4WIN integrated a .dll for PSK 
 into the program itself, and that THAT would be a violation of MMTTY's 
 restriction.  Or perhaps MMTTY has changed their language since I last 
 researched this several years ago.

Writelog does not distribute MMTTY or the shim.  It's up to the user to
install these things separately.  The same could presumably be done for DX4WIN.

73 - Jim AD1C


=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC
From [EMAIL PROTECTED]  Mon Sep 13 11:15:30 2004
From: [EMAIL PROTECTED] (Joe - =?iso-8859-1?Q?WD=D8M?=)
Date: Mon Sep 13 11:19:51 2004
Subject: [Dx4win] MMTTY and DX4WIN
Message-ID: [EMAIL PROTECTED]

DX4WIN should incorporate the ability to link to MMTTY, and make it as 
transparent as possible.

Here's the licensing language for developers, which definitively resolves 
the issue:

Commercial Programs:

If you distribute a commercial program, you CAN (emphasis added) include 
code to use the MMTTY and MMSSTV Engines with your software. However, you 
can not include engines as part of your distribution.

You must provide a link on your Website to the MM Hamsoft Website where 
the MMTTY and MMSSTV Engine may be downloaded by your users.  This will 
insure that the latest version is used.

73,
Joe
WD?M

[Dx4win] RTTY

[Joe - WDØM]

Happy to help, Jim - hope that we find MMTTY fully integrated into DX4WIN 
very, very soon to make our favorite logging program even better!

Cheers,

Joe
WD?M

At 09:30 AM 9/13/2004, you wrote:
Joe, thanks for ending the speculation!

- Jim

--- Joe - WD?M [EMAIL PROTECTED] wrote:

  Here's the link containing the licensing language for developers, which
  definitively resolves the issue:
 
  http://mmhamsoft.ham-radio.ch/programmer/index.htm
 
  And here's the language, directly from Mako:
 
  Commercial Programs:
 
  If you distribute a commercial program, you CAN (emphasis added) include
  code to use the MMTTY and MMSSTV Engines with your software. However, you
  can not include engines as part of your distribution.
 
  You must provide a link on your Website to the MM Hamsoft Website where
  the MMTTY and MMSSTV Engine may be downloaded by your users.
  http://www.qsl.net/mmhamsoft/http://www.qsl.net/mmhamsoft/   This will
  insure that the latest version is used.
 
  DX4WIN should incorporate the ability to link to MMTTY, and make it as
  transparent as possible.
 
  73,
  Joe
  WD?M
 
 
  At 08:36 AM 9/13/2004, Jim Reisert AD1C wrote:
  --- Pete Smith [EMAIL PROTECTED] wrote:
  
That may be, but my impression was that DX4WIN integrated a .dll 
 for PSK
into the program itself, and that THAT would be a violation of MMTTY's
restriction.  Or perhaps MMTTY has changed their language since I last
researched this several years ago.
  
  Writelog does not distribute MMTTY or the shim.  It's up to the user to
  install these things separately.  The same could presumably be done for
  DX4WIN.
  
  73 - Jim AD1C
  
  
  =
  Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
  USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
  PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC
 


=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC

[Dx4win] RTTY

[Jay Hainline]

That is what I notice here too. I used to be able to click on callsigns in
the psk31 window and it would place them in the callsign field of the main
logging program. But it does not always work with ver. 6.03. Worked fine in
5.03. Also I still have not heard any solutions for the ptt issue with the
psk31 window with it locking up on transmit.

73 Jay

Jay Hainline  KA9CFD  EN40om
Colchester, IL
[EMAIL PROTECTED]

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of J F Samuels
Sent: Friday, September 10, 2004 03:16
To: Juha Rantanen; DX4WIN List Server
Subject: Re: [Dx4win] RTTY


I disagree.  To require two computers, or two serial ports, or a dummyup
serial program and all that shenanigans to make it work, is not integration.

Even the PSK31 window no longer works properly.  In previous versions I
could click on a call and have it copy to the QSO Call window.  That, at
least, was somewhat integrated.  It is broken now.

In another post someone said they could use their MFJ TNC while logging in
DX4WIN.  That is what I said I did with my KAM, but that is also not
integration -- the two don't talk to each other.

John, K2CIB
- Original Message - 
From: Juha Rantanen [EMAIL PROTECTED]
To: J. F. Samuels [EMAIL PROTECTED]; Jim Martin - MM0BQI
[EMAIL PROTECTED]; DX4WIN List Server DX4WIN@MAILMAN.QTH.NET
Sent: Thursday, September 09, 2004 1:27 AM
Subject: Re: [Dx4win] RTTY



  To my knowledge it does not integrate with any sound-card based RTTY 
  programs.  I know you can import QSOs from WriteLog and many others, 
  but
 not
  in real time.

 That is not correct. It will work with MMTTY just fine. Check 
 http://users.skynet.be/ON4AOI/dx4winmmtty.html .

 Juha OH6XX




___
Dx4win mailing list
Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY

[Jim Reisert AD1C]

At 11:16 PM 9/9/2004, J. F. Samuels K2CIB wrote:

I disagree.  To require two computers, or two serial ports, or a dummyup
serial program and all that shenanigans to make it work, is not integration.

Writelog integrates with MMTTY.  If enough people request it, maybe Paul 
can add this functionality to DX4WIN as well.

73 - Jim AD1C


-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC

[Dx4win] RTTY

[Mark]

WOW, that would be great!

Mark  n2qt

- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]
To: DX4WIN List Server DX4WIN@mailman.qth.net
Sent: Friday, September 10, 2004 7:54 AM
Subject: Re: [Dx4win] RTTY


 At 11:16 PM 9/9/2004, J. F. Samuels K2CIB wrote:

 I disagree.  To require two computers, or two serial ports, or a dummyup
 serial program and all that shenanigans to make it work, is not
integration.

 Writelog integrates with MMTTY.  If enough people request it, maybe Paul
 can add this functionality to DX4WIN as well.

 73 - Jim AD1C


 -- 
 Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
 PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC

 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY

[Mike Rhodes]

Add me to the list...

Mike / W8DN

- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]
To: DX4WIN List Server DX4WIN@mailman.qth.net
Sent: Friday, September 10, 2004 7:54 AM
Subject: Re: [Dx4win] RTTY


 At 11:16 PM 9/9/2004, J. F. Samuels K2CIB wrote:

 I disagree.  To require two computers, or two serial ports, or a dummyup
 serial program and all that shenanigans to make it work, is not
integration.

 Writelog integrates with MMTTY.  If enough people request it, maybe Paul
 can add this functionality to DX4WIN as well.

 73 - Jim AD1C


 -- 
 Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
 PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC

 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY

[Jose ct1aoz]

Hi...
Please add me to the list also...

That's an important improvement to program...

best regards to Paul, Steve, Jim and all the others with the same need list
Jose, CT1AOZ
[EMAIL PROTECTED]


- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]
To: DX4WIN List Server DX4WIN@mailman.qth.net
Sent: Friday, September 10, 2004 12:54 PM
Subject: Re: [Dx4win] RTTY


 At 11:16 PM 9/9/2004, J. F. Samuels K2CIB wrote:

 I disagree.  To require two computers, or two serial ports, or a dummyup
 serial program and all that shenanigans to make it work, is not
integration.

 Writelog integrates with MMTTY.  If enough people request it, maybe Paul
 can add this functionality to DX4WIN as well.

 73 - Jim AD1C


 -- 
 Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
 PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC

 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY

[Bill Clark]

I use an MFJ 1278b with digital filtering and the RTTY window in Dx4win. All 
logging functions work fine along with the tnc. If you choose, you can also 
translate cw by getting into the cw mode on the tnc.
Bill-W5VW

Juha Rantanen [EMAIL PROTECTED] wrote:

 To my knowledge it does not integrate with any sound-card based RTTY
 programs. I know you can import QSOs from WriteLog and many others, but
not
 in real time.

That is not correct. It will work with MMTTY just fine. Check
http://users.skynet.be/ON4AOI/dx4winmmtty.html .

Juha OH6XX

___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
From [EMAIL PROTECTED]  Thu Sep  9 23:16:19 2004
From: [EMAIL PROTECTED] (J. F. Samuels)
Date: Thu Sep  9 23:23:55 2004
Subject: [Dx4win] RTTY
References: [EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

I disagree.  To require two computers, or two serial ports, or a dummyup
serial program and all that shenanigans to make it work, is not integration.

Even the PSK31 window no longer works properly.  In previous versions I
could click on a call and have it copy to the QSO Call window.  That, at
least, was somewhat integrated.  It is broken now.

In another post someone said they could use their MFJ TNC while logging in
DX4WIN.  That is what I said I did with my KAM, but that is also not
integration -- the two don't talk to each other.

John, K2CIB
- Original Message - 
From: Juha Rantanen [EMAIL PROTECTED]
To: J. F. Samuels [EMAIL PROTECTED]; Jim Martin - MM0BQI
[EMAIL PROTECTED]; DX4WIN List Server DX4WIN@MAILMAN.QTH.NET
Sent: Thursday, September 09, 2004 1:27 AM
Subject: Re: [Dx4win] RTTY



  To my knowledge it does not integrate with any sound-card based RTTY
  programs.  I know you can import QSOs from WriteLog and many others, but
 not
  in real time.

 That is not correct. It will work with MMTTY just fine. Check
 http://users.skynet.be/ON4AOI/dx4winmmtty.html .

 Juha OH6XX

[Dx4win] RTTY

[Jim Martin - MM0BQI]

I am considering moving up to DX4WIN to do my station logging.  I am most
impressed with the way it handles different callsigns and integrates with
LOTW.
I would like information on how users work everyday RTTY QSOs with the
program.  For contest logging I use N1MM and WriteLog which do the job very
well.  Can DX4WIN provide a similar level of integration and ease of
operation using soundcard based RTTY programs like MMTTY?
Thanks
Jim  MM0BQI
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.754 / Virus Database: 504 - Release Date: 06/09/2004

[Dx4win] RTTY

[J. F. Samuels]

To my knowledge it does not integrate with any sound-card based RTTY
programs.  I know you can import QSOs from WriteLog and many others, but not
in real time.

For casual QSOs, I use the RTTY window to drive my KAM in terminal mode.
I've set up the PF macros to do useful things, almost the same as in the PSK
window.   Of course, I have to set the call and other info in DX4WIN
manually.  In a contest, that would slow me up considerably, so I use MixW,
export ADIF, then import it to DX4WIN after the contest.

Appendix E mentions  the possibility of data sharing with other programs,
and the methods used, but does not name any programs which are compatible.

John, K2CIB

- Original Message - 
From: Jim Martin - MM0BQI [EMAIL PROTECTED]
To: DX4WIN dx4win@mailman.qth.net
Sent: Wednesday, September 08, 2004 6:36 AM
Subject: [Dx4win] RTTY


 I am considering moving up to DX4WIN to do my station logging.  I am most
 impressed with the way it handles different callsigns and integrates with
 LOTW.
 I would like information on how users work everyday RTTY QSOs with the
 program.  For contest logging I use N1MM and WriteLog which do the job
very
 well.  Can DX4WIN provide a similar level of integration and ease of
 operation using soundcard based RTTY programs like MMTTY?
 Thanks
 Jim  MM0BQI
 ---
 Outgoing mail is certified Virus Free.
 Checked by AVG anti-virus system (http://www.grisoft.com).
 Version: 6.0.754 / Virus Database: 504 - Release Date: 06/09/2004

 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY in 6.02

[sm3dxc]

Why don?t my RTTY work OK ?
In rtty mode, I can receive rtty OK ,but my trcvr refuse to transmit !
When I use the F-buttons on the computer, the only thing my computer say is 
+?what?
follow by cmd:
I`m using  ICOM IC-775DSP + AEA PK-232MBX and Windows xp, DX4WIN 6.02
All the settings in my computer,PK-232 and trcvr seems to be OK or!

Any suggestions?

73s de Ben SM3DXC

[Dx4win] RTTY

[Mel]

Creative Software has a good host mode terminal program that interfaces
nicely with DX4Win... It supports AEA (Timewave) and Kantronics... I'm not
sure about HAL products. Perhaps you should look them up...
http://www.cssincorp.com

 -Original Message-
 From: [EMAIL PROTECTED] 
 [mailto:[EMAIL PROTECTED] On Behalf Of Bob Check
 Sent: February 23, 2004 20:07
 To: dx4win@mailman.qth.net
 Subject: Re: [Dx4win] RTTY
 
 
 Ok here it is apples to apples or oranges ( the apple is RTTY 
 in DX4WIN 
 and the oranges is PSK in DX4WIN )
  
 In the psk mode when a call sign appears in the rx window and 
 you want 
 to put it in the qso call window  you have 3 ways to do it:
 1 ) you CLICK on it with the mouse. POINT AND CLICK or
 2 ) you copy and paste it in, slower than the first step or
 3) you type it in slower then the first two. Ok for casual 
 contacts and 
 thats if you can type ( you could have a cast on or whatever you can 
 imagine. )
  
 Try the first two steps in the rtty mode , in the DX4WIN RTTY 
 RX window. now you may be able to copy a whole line but not a 
 single letter or a 
 call sign, and if you are in a contest this typing the call 
 sign in is 
 like using a horse  buggy. For the casual rtty contact you can poke 
 along and type it in,  all the rtty mode logging programs 
 allow you to 
 point and click to add the call sign and reports, so lets at least do 
 what all the other programs let you do.   There is a short 
 fall in this 
 program, that is easy to fix and the reason givin for not doing so is 
 not valid in my opinion.
 
 Just my opinion FWIW.
  
 Bob w8gc
 
 
 Tom Branch wrote:
 
 Bob,
 
 I guess I'm confused...DX4WIN works fine for RTTY using my 
 AEA PK-900.  
 Are you looking for soundcard RTTY support?
 
 73 de Tom, K4NR
 
 - Original Message -
 From: Bob Check [EMAIL PROTECTED]
 To: dx4win@mailman.qth.net
 Sent: Monday, February 23, 2004 3:01 PM
 Subject: [Dx4win] RTTY
 
   
 
 Lets hope Paul can understand there is a lot of interest in 
 RTTY with 
 DX4WIN, because a few people want a CD of the program 
 doesn't mean 
 they have no internet access and why should a majority of 
 dx4win users 
 suffer because of a few who would need to go to a friends, library 
 etc. to download something? I have several friends who will not buy 
 dx4win because it does not work with RTTY.
 
 
 
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
 
 
 
   
 
 
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
 

[Dx4win] RTTY

[Tom Branch]

Bob,

I guess I'm confused...DX4WIN works fine for RTTY using my AEA PK-900.  Are
you looking for soundcard RTTY support?

73 de Tom, K4NR

- Original Message - 
From: Bob Check [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Monday, February 23, 2004 3:01 PM
Subject: [Dx4win] RTTY


 Lets hope Paul can understand there is a lot of interest in RTTY with
 DX4WIN, because a few people want a CD of the program doesn't mean
 they have no internet access and why should a majority of dx4win users
 suffer because of a few who would need to go to a friends, library etc.
 to download something? I have several friends who will not buy dx4win
 because it does not work with RTTY.

[Dx4win] RTTY

[Mel Martin]

Actually, I've no idea what you are getting at in your first paragraph... so
I can't comment on that... but...

DX4Win works fine with most TUs in command mode. Does the DXP38 support a
command mode as opposed to a host mode? I used DX4Win for years on RTTY,
Pactor and Amtor using a PK900. It doesn't work with sound board RTTY... it
would be a welcome improvement.

The QSL manager has some limitations, but saying it is far to limiting to
be useful is an exaggeration... but some improvement would be appreciated.
Date sensitivity would be very helpful. I haven't had problems with mode
specific managers, but that's probably because I'm not doing much digital
operating lately.

It certainly would be nice if Paul found some time for some needed updates.
Lotw support is presently pretty anemic... seems as if DX4Win is falling
behind...



- Original Message - 
From: Bob Check [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Monday, February 23, 2004 16:01
Subject: [Dx4win] RTTY


 Lets hope Paul can understand there is a lot of interest in RTTY with
 DX4WIN, because a few people want a CD of the program doesn't mean
 they have no internet access and why should a majority of dx4win users
 suffer because of a few who would need to go to a friends, library etc.
 to download something? I have several friends who will not buy dx4win
 because it does not work with RTTY.

 I also agree with Jim AD1C about how the QSL manager field works in
 dx4win, it is far to limiting to be useful.

 Its about 2 years since any real changes Paul what say you? Time to get
 up to speed with 2004 needs.

 73, Bob w8gc

 Subject: [Dx4win] DX4WIN W/RTTY?
 Date: Fri, 20 Feb 2004 12:46:24 -0500
 From: Wayne King [EMAIL PROTECTED]
 To: DX4WIN dx4win@mailman.qth.net

 Is anyone using DX4WIN and RTTY while logging? I've tried PSK31 which
works
 very well but  I can't get RTTY feature to work. My TU is a Hal DXP38 via
a
 com 1.

 I have NO RX or TX. So I guess DX4WIN does not support  the DXP38. There
is
 not much in the docs or in the setup to go by. The only choice is none or
 regular. I should have ordered a regular tu unit. Who makes them?
 Wayne N2WK

 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] RTTY

[Bob Check]

Ok here it is apples to apples or oranges ( the apple is RTTY in DX4WIN 
and the oranges is PSK in DX4WIN )
 
In the psk mode when a call sign appears in the rx window and you want 
to put it in the qso call window  you have 3 ways to do it:
1 ) you CLICK on it with the mouse. POINT AND CLICK or
2 ) you copy and paste it in, slower than the first step or
3) you type it in slower then the first two. Ok for casual contacts and 
thats if you can type ( you could have a cast on or whatever you can 
imagine. )
 
Try the first two steps in the rtty mode , in the DX4WIN RTTY RX window.
now you may be able to copy a whole line but not a single letter or a 
call sign, and if you are in a contest this typing the call sign in is 
like using a horse  buggy. For the casual rtty contact you can poke 
along and type it in,  all the rtty mode logging programs allow you to 
point and click to add the call sign and reports, so lets at least do 
what all the other programs let you do.   There is a short fall in this 
program, that is easy to fix and the reason givin for not doing so is 
not valid in my opinion.

Just my opinion FWIW.
 
Bob w8gc


Tom Branch wrote:

Bob,

I guess I'm confused...DX4WIN works fine for RTTY using my AEA PK-900.  Are
you looking for soundcard RTTY support?

73 de Tom, K4NR

- Original Message - 
From: Bob Check [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Monday, February 23, 2004 3:01 PM
Subject: [Dx4win] RTTY

  

Lets hope Paul can understand there is a lot of interest in RTTY with
DX4WIN, because a few people want a CD of the program doesn't mean
they have no internet access and why should a majority of dx4win users
suffer because of a few who would need to go to a friends, library etc.
to download something? I have several friends who will not buy dx4win
because it does not work with RTTY.



___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win



  

[Dx4win] RTTY

[Tom Branch]

I'm with you now.  I always enjoy contesting with Writelog for that reason. 

- Original Message - 
From: Bob Check [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Monday, February 23, 2004 7:07 PM
Subject: Re: [Dx4win] RTTY


 Ok here it is apples to apples or oranges ( the apple is RTTY in DX4WIN 
 and the oranges is PSK in DX4WIN )
  
 In the psk mode when a call sign appears in the rx window and you want 
 to put it in the qso call window  you have 3 ways to do it:
 1 ) you CLICK on it with the mouse. POINT AND CLICK or
 2 ) you copy and paste it in, slower than the first step or
 3) you type it in slower then the first two. Ok for casual contacts and 
 thats if you can type ( you could have a cast on or whatever you can 
 imagine. )

[Dx4win] Rtty

[Courtney Judd - K4WI]

Anyone have any hints on doing RTTY with DX4WIN 6.02 and MMTTY keying FSK
via the COM port 2 ?  This combo works so well with Writelog that it should
do as well with my other favorite!!! Thanks and 73's Cort K4WI


Courtney Judd K4WI / NA4W
2300 County Road 61
Uniontown, Al. 36786

[Dx4win] RTTY Software

[Pawel SP7PS]

Hi Bill,

As I know, you can use MMTTY with DX4WIN. The only problem is, that MMTTY
engine can not be include into commercial software as DX4WIN. So, if you
have two unused COM ports or you are user of WinXP you are able to work RTTY
within DX4WIN. But it doesn't work smooth and comfortable. I use this combo
(DX4WIN and MMTTY) but only for short pile-up QSOs. For normal contacts I
open MMTTY and work from that RTTY program.
Why I do not like DX4WIN's RTTY? You can not pick the callsign nor name nor
RST from the RTTY window. You have to put it manually in proper fields of
DX4WIN. Of course the buffers use the right callsign, name, etc when you
manually filled the right places first - I mean before sending the message.

If you are user of WinXP there is small software that connect DX4WIN and
MMTTY without any extra COM ports. The software emulate virtual com ports
and in DX4WIN's setup you set e.g. COM 8 and in MMTTY COM 9. It works
perfect but need WInXP (or Win2K, I think).

73's
Pawel, SP7PS
http://sp7ps.pl


- Original Message - 
From: Bill Henderson [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Sunday, July 06, 2003 10:07 AM
Subject: [Dx4win] RTTY Software


Hi

I don't have a rtty tnc. Is dx4win compatible with any of the RTTY programs
available?

I know that MMTTY is out because it won't allow commercial programs to use
it.

73

Bill GM0VIT

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win