Sorry if this has already been covered. I've checked the archives but didn't find any related posts.
I've recently upgraded from 5.03 to 7.02. I notice that the VFO control for my TS-850 is different when clicking a spot that is split. Under 5.03 the DX frequency is set in VFO A and the QSX frequency is set in VFO B but the VFOs aren't split (Ie both TX and RX are set to VFO A). The I manually split the VFOs. [I've come to live with that little quirk]. Under 7.02 the frequencies are set and the VFOs aren't split, as before. The difference now is that VFO B is selected for both TX and RX. Ie, the QSX frequency. If a non-split spot is clicked the DX frequency is set into the currently selected TX VFO (either A or B) and VFO A is selected. That is, if I'm on VFO B and click a spot, its frequency goes into VFO B and the radio switches to VFO A. So now I have to manually select VFO B. I hope all that is clear. So my question is: Is there a way to change the default radio control behavior (eg, via an edittable control file) or is it set in code? tnx, Kris N5KM From [EMAIL PROTECTED] Wed Feb 28 02:41:52 2007 From: [EMAIL PROTECTED] (Dave Perry N4QS) Date: Wed Feb 28 02:47:20 2007 Subject: [Dx4win] TS-850 control under 7.02 References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Kris, If you double click on the spot a second time, it will normally switch the VFOs so that they are split correctly. Why it doesn't do this the first time, I have no clue. Dave, N4QS ----- Original Message ----- From: "Kris Mraz" <[EMAIL PROTECTED]> To: <dx4win@mailman.qth.net> Sent: Tuesday, February 27, 2007 10:52 PM Subject: [Dx4win] TS-850 control under 7.02 > Sorry if this has already been covered. I've checked the > archives but didn't find any related posts. > > I've recently upgraded from 5.03 to 7.02. I notice that the > VFO control for my TS-850 is different when clicking a spot > that is split. > > Under 5.03 the DX frequency is set in VFO A and the QSX frequency > is set in VFO B but the VFOs aren't split (Ie both TX and RX > are set to VFO A). The I manually split the VFOs. [I've come to live with > that little quirk]. > > Under 7.02 the frequencies are set and the VFOs aren't > split, as before. The difference now is that VFO B is selected > for both TX and RX. Ie, the QSX frequency. > > If a non-split spot is clicked the DX frequency is set into the > currently selected TX VFO (either A or B) and VFO A is selected. > That is, if I'm on VFO B and click a spot, its frequency goes into > VFO B and the radio switches to VFO A. So now I have to > manually select VFO B. > > I hope all that is clear. So my question is: Is there a way to > change the default radio control behavior (eg, via an edittable control > file) > or is it set in code? > > tnx, > > Kris N5KM > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.446 / Virus Database: 268.18.4/705 - Release Date: 2/27/2007 > 3:24 PM > >