Re: [Ekiga-list] python dbus script - pcspeaker
Fredrik Axelsson a écrit : > For the script to work; > Ekiga needs to be compiled with dbus support > > Depending on your distro you will need packages that provide: > - beep (a program which beeps the pcspeaker) > - python-dbus bindings (on gentoo they are included with dbus...I think) > - pygtk I'm quite happy to see the dbus component be put to good work :-) Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] problem installing windows version of ekiga
Akbar a écrit : > Hi, I try to install ekiga ( windows version ). First it complained > about SDL.dll. Okay, I resolved it by downloading dll from sdl > website. Yes, that's a stupid packaging problem -- basically we don't solve it because we would like the .zip to disappear in favour of a real installer. :-/ > Then it complains this: > The procedure entry point XML_SetDoctypeDeclHandler could not be > located in the dynamic link library xmlparse.dll > > What does that mean? Hmmm... this is new :-/ Where is this xmlparse.dll ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Bad video quality / bandwidth
Morris Beverly a écrit : > Finally, let me say that people in general ( and especially supervisors) > have wildly inflated ideas about what is possible in video > conferencing. Theater syndrom? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga & (k)iax ?
Adam Bogacki a écrit : > Thanks, you are right ..it's much better, without the cookie muncher > effect. However, there does seem to be some echo, If you have a setup with speakers near the mic and calling the echo test, that is bound to happen, and an headset is the solution. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] not able to bind to ils.seconix.com
carl a écrit : > I'm been trying get gnomemeeting 1.2.2 to work. I keep getting error > Can't bind to ils.seconix.com Normal : it's down since long. Gnomemeeting is now ekiga, and is up to version 2.0.2! Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] not able to bind to ils.seconix.com
carl a écrit : > Ok, I downloaded ekiga-2.0.2-1.20060mdk.i586.rpm from the ekiga site. > It looked like it installs ok, but when I try to run it nothing happen > so I ran it from a console and got the following error > [EMAIL PROTECTED] Desktop]$ ekiga > ekiga: symbol lookup error: /usr/lib/libopal.so.2: undefined symbol: > _ZThn568_N12PVXMLSession9RecordEndEv > [EMAIL PROTECTED] Desktop]$ > > I don't have a clue how to start to fix this. You need to install the opal package too. How did you manage to install the ekiga package without it refusing because of missing dependancies ?! Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] not able to bind to ils.seconix.com
carl a écrit : > I uninstalled all rpm's (ekiga, opal,libpw's shown on ekiga web site for > mandiva 2006) when I try to install > libpwlib1-1.10.1-0.1.20060mdk.i586.rpm > I get an unsatisfied libpwlib1-plugins[>= 1:1.10.1-10.1.20060mdk] error Which certainly means that you need to install some pwlib plugin package. I would advise the alsa one for audio and the v4l one for video. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] videoconference between two ekiga.net accounts, one using linux and the other using linux.
Damien Sandras a écrit : > Kilian can certainly do that. I thought the rationale behind us not fixing this earlier was that we would give a strong incentive to get a right fix (ie: a real installer). Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Connecting Ekiga with NetMeeting using an IP address
Boris Bartolome a écrit : > Some friends of mine have created a WindowsXP ad-hoc wireless network > and communicate among them using NetMeeting. I use Linux and Ekiga. I am > part of their wireless network and would like to communicate with them > using Ekiga connecting directly with their IP address. Is that an > option? If yes, how should that be done? Type in "h323:192.168.x.y" in the address entry. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Mailing List
Wim Vanparys a écrit : > Hi, > > Could you unsubscribe me from the mailing list, since I no longer use > Gnomemeeting. > > THX, > > Wim > VANPARYS > > ___ > ekiga-list mailing list > ekiga-list@gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list Would you manage to read the above lines, which appear at the end of every post to this list, follow the link and do it yourself? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Mailing List
csarid a écrit : > I would also like to be unsubscribe. After many attempts using the website > recommended, I am still getting emails from the list. Could it be the unsubscribing is broken because of the renaming of the lists ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Subscribe OK, but unable to call
[EMAIL PROTECTED] a écrit : > http://www.collinrichard.info/output_ekiga.txt > > Can you just look at it and tell me what is wrong ? It looks like either the other end doesn't answer, or the answer doesn't come back to you. Did you try calling sip:[EMAIL PROTECTED] ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] How come that it has two different icons?
John R Sandidge a écrit : > I run the Ubuntu Dapper release, among others. > > In the Applications-Internet-Ekiga (and other places) the icon is the > current one. In the right side of the screen (in running > applications) the icon is a different one. Why have two different > icons? The "Firestarter" release and the "Skype" release have the > same problem. The "Gizmo Project" has the same icons in both places. > The best is "Gaim," which has the same icon with a "page" imprinted > over it. Or, have I overlooked something? > > Thank you. "Ekiga" is my favorite voip/messenger. Could you post a screenshot somewhere and give us a link here? Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] cannot call - call refused
Jan Schampera a écrit : > Hi! > > - Latest CVS (pwlib, Opal, Ekiga) > - Registering to ekiga.net seems ok > - Every call (500 service or user) gets "refused" > - getting a call gets "terminated by an error" > > URL of the -d 4 log: > http://www.thebonsai.de/refuse_call.log Problem with plugin codecs. :-) Should go in -devel-, since you're hurting yourself on the HEAD :-) Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Does Ekiga/linux work with Wengophone/WinXP, both audio and vide
jos S a écrit : > ja hoor gewoon net meeting en ekiga gaat oke of msn en amsn en dan skype > aan doen > netmeeting zit al in xp moe tje verborgen bestanden tonen aanzeten Uh ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga and call recording
Rafał Ryba a écrit : > I found somewhere on Bugzilla a call recording request. However, I've lost > it and I can't find it now. Probably : http://bugzilla.gnome.org/show_bug.cgi?id=330276 This isn't very high priority... I would say that it is technically related to http://bugzilla.gnome.org/show_bug.cgi?id=339881 Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Windows Ekiga and voipbusters
Jan Schampera a écrit : > On Mon, 11 Sep 2006 04:01:51 -0700 > "George" <[EMAIL PROTECTED]> wrote: > >> I haven't been able to figure out why the windows version of Ekiga >> refuses to connect to voipbusters. It works fine in Linux. >> >> Any ideas? > > My first guess on weird network things on Windows is always "firewall". This is only the second guess on my list. Mine starts with "antivirus" ;-) Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] PC-PC communication; Ekiga vs Windows
Jean Basile a écrit : > Hello, > > I would like to connect to some Windows users and be > able to see them or at least hear them. > > Now, my friends use Windows or have only Windows at > hand. So my need is which app can be used to 'talk' to > Ekiga? It should be something that would be easy > accessible or already installed as they either don't > have administrative access or they don't know too much > about computers. > > I already have an ekiga.net account and tested my > sound with the echo service [EMAIL PROTECTED] and it works > fine, far better than the Linux Skype echo. > > So: > 1. what application from Windows know to 'speak' with > Ekiga? > 2. do I have to register in another place than > ekiga.net? > 3. how do I connect with those applications? > 4. how can those Windows applications connect with my > ekiga? 1. ekiga itself has an alpha port (the installer still sucks) ; 2. no, you don't need to register anywhere ; 3. any decent SIP software will be able to register to an account somewhere, and you'll be able to call them there ; or you can use their IP address directly if you want ; 4. if your username on ekiga.net is "jean.basile", then they just have to call "[EMAIL PROTECTED]" while you are registered there. Hope this helps, Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Screenshot!
John R Sandidge a écrit : > Julien PUYDT <[EMAIL PROTECTED]> > > Here is a screenshot of my "problem" concerning Ekiga. > > The link is <ftp://web.infoave.com>. Anonymous and anything you want > for a password. The file is IHCTSK~W.PNG. Be sure to erase the file > when you get done using it. > > Thank you. Sorry? What are you writing about? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] CVS
George a écrit : > I decided to try to play with the cvs version of ekiga. I made sure > there where no ekiga, pwlib. or opal components left over from other > installs. Good. > Opal and Pwlib both compiled fine, no problems. But when trying to > compile ekiga, configure complains that the opal and pwlib versions > don't match want it wants. Where did you get your sources ? We seem to have problems with outdated cvs packages lately... so if you pwlib&opal sources come from there, they won't be any good. > So, I'm not sure if there needs to be a change in the ekiga configure > script or opal cvs and pwlib cvs are not reporting the versions ekiga is > looking for. Don't -- the checks are precisely there to avoid building a broken ekiga. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] CVS
George a écrit : > Thanks for the info. However, I'm really not familiar with doing things > this way. Would it be possible to send me your shell scripts? Also how > do you connect to cvs.gnome.org:/cvs/gnome module "ekiga". I tried using > my browser and it doesn't like the address at all :) Uh... may I suggest that you don't try CVS? I'm not sure you're ready yet for that type of hard experiences... Snark PS: [EMAIL PROTECTED] is probably what people without a gnome developper account should use ;-) ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] CVS
Jan Schampera a écrit : > On Wed, 13 Sep 2006 08:18:12 -0700 > George <[EMAIL PROTECTED]> wrote: > >> Thanks for all the help. Everything compiled correctly. But now when I >> start Ekiga it says it can't find any usable audio plugins. And also >> says it can't find my cam. > > That sounds buggy. Julien knows something about it (if it is/should > be/will soon/whatever fixed). I'm not sure I know something about it : looks like an installation issue... But I don't like discussing cvs HEAD on the normal user list. Remember : cvs HEAD is bleeding-edge. Really bleeding. And sometimes off the edge. It's not ready for anyone generally, especially those days. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Sloow sound
jtd a écrit : > I am using GnomeMeeting 1.0.2 How is Nephertiti going? Long time no see! Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] How to get the src code frm the .rpm file
Chandresh P a écrit : > Can someone please tell me what a .rpm file is ? > I have downloaded the .rpm files provided in the EKIGA site > and need the source code to port on to a Embedded platform. > I would appreciate it if someone could tell me how to obtain the source > code from .rpm files. RPM is a binary package format. The sources can be obtained from gnome.org's cvs. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Sloow sound
jtd a écrit : > I am using GnomeMeeting 1.0.2 debian sarge R2 with stock kernel and > alsa drivers on a via cle266 mobo. The sound ship is via 8235. all > Called parties hears deep base voice from my machine ( incorrect > sampling rate?). I can hear him clearly. However recording with krec > produces a normal file which plays back properly. This is on a lan. > Any hints. Searching google did not yield anything useful. I don't know what krec is... what does it give with arecord ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] crash with 2.0.3
Damien Sandras a écrit : > My guess would be that something went wrong when compiling : compilation > with wrong pwlib headers for example. We really have a problem with this : our dependancies are way too hard to get right... Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] G729 codec
Damien Sandras a écrit : > It costs about 10 dollars (for patents). 10 dollars for each user, I guess? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] G729 codec
Damien Sandras a écrit :
> Le mardi 19 septembre 2006 à 21:10 +0200, Julien Puydt a écrit :
>> Damien Sandras a écrit :
>>> It costs about 10 dollars (for patents).
>> 10 dollars for each user, I guess?
>>
>
> 10 dollars for each communication. So you can have 10 users at the same
> time on the computer, but only one oft hem using ekiga and G.729.
>
> I need to investigate on this anyway as part of the project we discuss
> frequently with Jan :)
Nice.
Call your family, discuss a little : 10$.
Hang up.
Call again ("Oh, by the way") : 10$
Formidable!
Snark
___
ekiga-list mailing list
ekiga-list@gnome.org
http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] G729 codec
Damien Sandras a écrit : > Well, my explanation was not clear. Indeed :-) > 10 dollars for each simultaneous communications. > ie 2 Ekiga running at the same time on the computer and doing calls *at > the same time* with G.729 : 20 dollars. And consecutive communications ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Firewire cam
Juergen Schinker a écrit : > Firewire is super it worked out of the Box You mean ekiga managed to use your firewire device out-of-the-box ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] how to run eki?
Jan Schampera a écrit : > On Thu, 21 Sep 2006 16:57:43 +0530 (IST) > Prakash B <[EMAIL PROTECTED]> wrote: > > >> i installed the ekiga software successfully , by giving the command >> "make install" what to do after that? >> how to run ekiga? > > "ekiga"? > > If the install prefix bin directory is not in $PATH, > "/usr/bin/ekiga" > "/usr/local/bin/ekiga" The correct question is : "what did you do before the 'make install' ?". I have a hard time grasping how someone could manage to compile ekiga but not know how to run it... > If every guessing fails, something like > > find / -name "*ekiga*" -perm -400 > > Which will search every "*ekiga*" file with minimum mode > "owner-executable". Ouch! Hope you don't have a huge disk around, or this will take ages. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] about ekiga?
Prakash B a écrit : > now i'll explain clearly what i want. > > in linux terminal when we type "ekiga" what are the things that are > happening? > what are the function executing? what are all the functions called? > > guide me please. > thanks for the comments I propose that you begin by learning C and studying smaller programs before you try to study how ekiga works... Besides, this is more devel-list-type question than a user-list-type question. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ** (bug-buddy:9370): WARNING **: Couldn't load icon for Open Folder
Typhoon a écrit : > After the latest updates it seems to be working ok. Great! We won't receive the same bug report over and over again every ten minutes! Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] compile ekiga
lefqih Amine a écrit : > Hello, > I try too compile ekiga-2.0.2 with the documentation is shown on the web page > > PWLIB: ./configure --prefix=/usr --enable-plugins --disable-oss --enable-v4l2 >&&make && make install > > OPAL: $ ./configure --prefix=/usr && make && make install > > Ekiga: $ ./configure --prefix=/usr --sysconfdir=/etc && make && make install > > but I get the error message: > > checking for PWLib version... 1.10.1 > checking for OpenLDAP support in PWLIB... no > configure: error: Sorry but the PWLib version you are using doesn't support > LDAP > > i have debian etch with kde3.5. Ah, indeed, the faq doesn't say (it probably should) : please make sure you installed the developpment packages for openldap before you compile pwlib. So the fix is easy : install openldap-dev/libldap2-dev whatever it is called, recompile pwlib, then opal, then ekiga. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Use of dbus component in ekiga????
chandrashekar mogilicherla a écrit : > Iam new to ekiga , while scanning through source code i got to see dbus > component code.Later i found that it is used for remotely controlling > ekiga > can anybody give me more details about dbus component We have using_dbus.html in the doc/ directory of the source code. That should be a good start :-) Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Symmetric NAT problem
Paulo J. Matos a écrit : > I have a symmetric NAT problem. I'm living in a student halls > currently and I'm connected to the university connection which > supposedly does not have any kind of firewall. A university with a non-firewalled connection ?! Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ekiga on maemo SDK
[EMAIL PROTECTED] a écrit : > Thanks for your help. > now ekiga runs on my PC. > I installed scratschbox and now I try to start ekiga on maemo SDK. > I had the same problems with libraries. > 1.did anyone manage to install ekiga on Nokia 770 or on maemo SDK > 2.now I try to static-compile ekiga on my PC .but up to now I did not manage > it. > I changed the Makefile: EKIGA_LIB_CFLAGS = - static but without success. That would be more for the devel-list than the user list. I look forward an interesting thread! :-) Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga for High Quality Video Conference
simon a écrit : > 1) Does a firewire audio plugin exist yet? No. You can add yourself to CC in that bug : http://bugzilla.gnome.org/show_bug.cgi?id=318679 that way you'll be notified whenever that moves. > 2) Is there any support for using a external handset/phone (so that you > could use a decent speaker phone)? No idea. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] You need the PWLib library to compile Ekiga
Bent Bagger a écrit : > Hi > > I hope I'm not too alone on this list... nothing has been archived > from it so far. But here goes: > > I try to build Ekiga from the sources on a box running Suse Linux > 10.1 with KDE as my chosen desktop manager. I have built pwlib and > opal from the sources without problems, but when I run > > ./configure --prefix=/usr --sysconfdir=/etc > > in the ekiga-2.0.2 directory I get this: > > checking for PWLib includes in /usr/include/... > checking for /usr/include/ptlib/pprocess.h... yes > checking for read in -lpt... no > configure: error: You need the PWLib library to compile Ekiga > > This does not look consistent to me. What have I done wrong??? It is consistent : (1) it found pwlib's headers (2) it didn't find the lib itself. Did you install pwlib correctly ? Looking in config.log is generally the best way to know what went wrong in a configure script. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] iLBC codec
Damien Sandras a écrit : > It should still be there under the "iLBC" name. If it is not there, > report a bug to the Ekiga package on Edgy because we have not removed > it. I can confirm it isn't there. What is the bug number, if already submitted to launchpad ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Symmetric NAT problem
michel memeteau a écrit : > Am I wrong or is it the main feature that made those people fond of this > crappy skype ? Am I wrong or not behaving well with network is the main feature that made all those university network managers ban this crappy skype ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Poor audio quality
Mario Rossi a écrit : > I can play music, watch TV and DVD at the same time with the default > (i.e. dmix) ALSA device with very good quality. Ekiga seems the only > application affected. Notice how all these other applications only *play* sound, but don't *both* *play* and *record* simultaneously : they don't stress the drivers as much! Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Poor audio quality
Mario Rossi a écrit : > Where is actually the problem? > - the driver > - dmix > - alsa Here, most probably. Snark PS: why do you post twice? ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] direct connection does not work. why?
Christoph Groth a écrit : > Computer B has a dyndns account. When A (logged in as [EMAIL PROTECTED]) > calls sip:[EMAIL PROTECTED], computer B notices the call, but A > does not notice the call being answered or accepted. Then A doesn't get the acceptation from B : firewall issue. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga 2.0.3. calls for version 1.10.1 of libpt_linux_x86_r
Bent Bagger a écrit : > If I didn't know better, I would conclude that the library version is > somehow hard-wired into Ekiga... It isn't. >> The symlink you created is potentially dangerous and could lead to >> unexpected crashes if the library is binary incompatible with the older >> 1.10.1. >> > I hope not, and I believe it is safe, because even if Ekiga *thinks* > it links to the 1.10.1 version it is actually linked to the 1.10.2 > version. It isn't ekiga which says so, it's the linker. If the linker thinks so, it's probably because you *do* have an old libpt*so file somewhere around. Look for that file, I'm pretty sure it's there somewhere. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga 2.0.3. calls for version 1.10.1 of libpt_linux_x86_r
Bent Bagger a écrit : > There is a morale in this, but I'm not quite sure which ;-) The morale is that you always have to build pwlib, then opal, then ekiga. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] No audio - small red exclamation icon
Velko Hristov a écrit : > Hello, > > I'm trying to connect with ekiga to my parents and the video > connection is OK. After we connect they get an audio error message and a > small red exclamation icon is shown over the main ekiga icon in the > system tray. Initially I thought it may indicate a sound card full > duplex problem and urged them to buy another sound card. Now with the > new one the problem persist. > > I tried to look up google and the mail archives about this problem but > looking for "small red exclamation" has not been the most rewarding > experience. Could somebody tell me what this icon means? Of course you didn't find that icon in the archives... it's an ubuntu patch ; after some research it means you're in a call. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Sources For 2.03
George Boyd a écrit : > Damien, where can I get the sources for 2.03? I had offered to help > Johhny make RPM's for Fedora Core 6, but as yet he hasn't sent me the > program he was using to do it. I would like to compile them for myself. > I'm not sure how to do it and make them publicly available, but if I can > get a little help, I'll be glad to try. Uh... don't we have them in the download section of ekiga.org !? Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ekiga answers with delay ¿... ?
Agustín Treceño a écrit : > Hello everybody! > > I have a pbx asterisk configured and i want to try ekiga like softphone > (until now i use twinkle). Everything is ok, but when i make a call, i > receive the ring tone for 2 seconds, therefore i ear the message "you are > trying to reach" insted of "enter the extension of the person you are > trying > to reach". So, ekiga wastes 1 or 2 seconds for establishing the connexion > ¿...?. With twinkle there isn't this delay. Known bug : asterisk begins to send the voice before it acknowledged which codec it will use for that! Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Receiving SIP RTP before media description [was ekiga answers with delay ...?]
Damien Sandras a écrit : > Le dimanche 26 novembre 2006 à 12:33 +1100, Craig Southeren a écrit : > > [...] > >> If anything, it would be a bug in OPAL, and so I have copied this email >> to the correct OPAL mailing list so that other people who are >> knowledgeable in SIP may see it. >> > > Most of the OPAL bugs are inside the Ekiga bug tracker. I have moved > those I don't plan to fix to the openh323 bug tracker. > > However, I think the paragraph in the SIP RFC is clear, when you send an > offer, you must be ready to receive media for all codecs in that offer > before the offer has been acknowledged. I understand it sounds weird, > but that is one of the limitations of OPAL. > > Another limitation is that the codec to use is determined from the 200 > OK answer in a way that is not necessarily correct. > > For example, if you send an INVITE with iLBC, PCMU and PCMA as available > codecs, and the answer comes with PCMU, PCMA and iLBC (in that order) > back, how do you determine if you have to send iLBC or PCMU? OPAL will > send PCMU because it is the preferred codec in the answer. > > However, the codec to use should be determined by the RTP payload. So > OPAL should be able to send and receive PCMU/PCMA/iLBC, and choose the > correct one as soon as it receives RTP from the remote peer. > > However, that is a non trivial change to OPAL. > > What do you think? Here is how gstreamer does, as far as I know : they get the data and feed it to their codecs, which return something which measures their confidente it is "correct data" for them. So by elimination, they get the right codec, which can then be confirmed and better tuned afterwards. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Receiving SIP RTP before media description [was ekiga answers with delay ...?]
Craig Southeren a écrit : > On Sun, 26 Nov 2006 12:14:29 +0100 > Julien Puydt <[EMAIL PROTECTED]> wrote: > > ..deleted > >> Here is how gstreamer does, as far as I know : they get the data and >> feed it to their codecs, which return something which measures their >> confidente it is "correct data" for them. >> >> So by elimination, they get the right codec, which can then be confirmed >> and better tuned afterwards. > > This sounds like it could require a lot of resources. Eh, I didn't claim they were doing it right, just explaining how they did ;-) Can we buffer the incoming data until we know how to proceed it ? That would be a very dirty workaround, but would fly. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] gatekeeper automatic discovery
teamlog a écrit : > Ok, you answered my main question. > Is there a timetable for the "Automatic Discovery" to be reimplemented ? Or > is this so much useless that the is much chance for it not to be > reimplemented at anytime? We have discovery of LAN contacts via avahi. Not sure if that's what you want. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] gatekeeper automatic discovery
Anne Wilson a écrit : > On Friday 15 December 2006 13:38, jos S wrote: >> hello i wont to get out off dis group how to do it >> thanks for all help but i doint wont no mail no more >> happie chrismus >> > Instructions are in the 'Full headers': There's also how each and every message ends : >___ > ekiga-list mailing list > ekiga-list@gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list I'm always impressed how people managed to subscribe, but cannot find the skills to unsubscribe for some reason... Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] No audio plungin found on X64
jos S a écrit : > please doint send my mails no more dis un do shit dus not work Get a brain. You subscribed, you unsubscribe. We won't stop using the list because some lamer is unable to unsubscribe. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] invalid gatekeeper settings cause gnomemeeting to crash
Alan Ezust a écrit : > Problems with GnomeMeeting 1.2.3 (debian kanotix unstable) Upgrade. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga win32 problems
Bernat Tallaferro a écrit : > error message and ekiga won't even start. The error message is the > following: > > AppName: ekiga.exe AppVer: 0.0.0.0 ModName: libgtk-win32-2.0-0.dll > ModVer: 2.10.6.0 Offset: 002217a2 Hmmm... perhaps you're using a gtk+ runtime different from the one used to compile ekiga? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Coexistence of ekiga with an ATA
ael a écrit : > Initially there are 14 packets exchanged. This is while ekiga is > starting up. At this point attempted calls to, say [EMAIL PROTECTED], fail > usually with abnormal call termination. You mean ekiga wasn't registered yet to ekiga.net ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga 2.0.4 available
George Boyd a écrit : > I downloaded the 2.04 source. I'm running fedora core 6. Everything > compiles fine, but when I try to configure ekiga, it comes back with an > error that says " Sorry but the PWLib version you are using doesn't > support LDAP" > > Any ideas? I sure would like to get it working. Recompile pwlib *after* installing openldap's devel package. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] EKIGA locks using video, when connected to xmeeting
Damien Sandras a écrit : > Ah yes. Now I can really shout : SUSE SUCKS! > > I'm sorry for the troll, but every time we are doing a release, they are > doing something more stupid. > > This time they took out a random CVS tarball to package a release. Can't we do something à-la-firefox : a distribution can call the packaged program ekiga if and only if the versioning of the base libs corresponds to an approved combination ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] EKIGA locks using video, when connected to xmeeting
ALPHONSO Fabrice a écrit : > Upgrading packages (4): > [EMAIL PROTECTED][EMAIL PROTECTED] > [EMAIL PROTECTED][EMAIL PROTECTED] > > Downgrading packages (2): > [EMAIL PROTECTED][EMAIL PROTECTED] *downgrading* !? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Where does ekiga store all its settings?
Tom Cumming a écrit : > I'm sure this is a stupid question and the answer is staring me in the > face, but can anyone tell me where Ekiga saves all its configuration > settings? (Or in other words, what should I back up to insure I don't > ever have to manually set it up again?) > I'm assume it is somewhere along the lines of > /home/[username]/.something It's in gconf, like all other gnome programs. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Does anyone know how to build ekiga on windows?
Lojic-Skoric, Suzana a écrit : > Thanks, I hate all-in-subjet mails with twenty lines of stupid legalities in the body. Answers are here : http://snapshots.seconix.com/win32.php Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Does anyone know how to build ekiga on windows?
Jan Schampera a écrit : > On Fri, 23 Feb 2007 10:58:20 -0700 > "Lojic-Skoric, Suzana" <[EMAIL PROTECTED]> wrote: > >> Thanks, >> >> Suzana >> >> >> The information contained in this e-mail message is PRIVATE. It may >> contain confidential information and may be legally privileged. It is >> intended for the exclusive use of the addressee(s). If you are not >> the intended recipient, you are hereby notified that any >> dissemination, distribution or reproduction of this communication is >> strictly prohibited. If the intended recipient(s) cannot be reached >> or if a transmission problem has occurred, please notify the sender >> immediately by return e-mail and destroy all copies of this message. >> Thank you. >> > > !? ... what ... ?! The thanks is because the subject has the question. The rest is pure crap. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Does anyone know how to build ekiga on windows?
Suzana Lojic-Skoric a écrit : > http://snapshots.seconix.com/win32.php > > explains how to install already built application. It does not give me help > on how to build it myself. Unless ekiga_build.zip is answer to it. I have > downloaded it.. but I don't know what to do with it. I normally do not > develop apps under windows and it is now obvious to me what to do with > files > under ekiga_build.zip. We compile ekiga for win32 on gnu/linux using mingw's cross-compiler, and ekiga_build.zip has what's needed to do so. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Block SIP address ?
Laurent Jacques a écrit : > Hi, > > I'm new to the list and I'm using ekiga from a while now. Great and > handy program. > > Here is my problem: > > I kind of pervert person try to contact my wife by ekiga all the time > when she is connected. > Do you know if it is possible to block his sip address (as for msn or > jabber messaging) so that she has not to every time refuse the requested > connection ? > > This kind of feature is useful too for children or teenagers who would > use ekiga in a protected way. Of course, some rule have to be respected > by them too to avoid that, but blocking sip address could definitely be > a part of the solution. We know since long, but haven't found the time to work on it : http://bugzilla.gnome.org/show_bug.cgi?id=389073 I had presented a design to allow blacklisting some time ago, so even if there's no code progress yet, ideas get mature. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Feature request: ZRTP support
Rene Bartsch a écrit : > Does Ekiga use "GNU ccRTP" or is RTP function included in OPAL or PWLIB? The network stack is PWLIB/OPAL/EKIGA. I don't know exactly where RTP is, but the basic socket abstraction is in pwlib and the codecs in opal. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Trying to install 2.0.5
Manuel Mendez a écrit : > I have been using 2.0.3 that came standard with Ubuntu, but I wanted to > upgrade. I was doing okay installing the other libraries but when I > tried to > configure I got this: > > checking for EKIGA... configure: error: Package requirements (gtk+-2.0 >= > 2.6.0 gthread-2.0 >= 2.4.0 esound >= 0.2.28 gconf-2.0 >= 2.2.0 > libgnome-2.0>= > 2.2.0 libgnomeui-2.0 >= 2.2.0) were not met: > > No package 'gtk+-2.0' found > No package 'gthread-2.0' found > No package 'esound' found > No package 'gconf-2.0' found > No package 'libgnome-2.0' found > No package 'libgnomeui-2.0' found > > If someone could help I would really appreciate it. If you don't understand this explicit error message, then probably you shouldn't try to compile ekiga yourself ; did you check if we had packages available on the site ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga.net like Open Source application?
Joel Bryan Juliano a écrit : > Hello, Is the Ekiga.net web application open source? and If yes, where > can I get it? > I think (and Damien will correct/confirm) that it's just asterisk+serweb, both open source. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] static binary for ekiga 2.0.7 (was Re: static binary for ekiga 2.0.5)
Damien Sandras a écrit : > But most probably Ubuntu guys will update quickly. Ubuntu seems stuck on 2.0.3... Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ekiga for win32 does not detect NAT correctly
Dieter Rogiest a écrit : > at my sister's place I installed ekiga for windows (2/3/2007) on WinXP. > She has a adsl router/modem Zyxel. > The configuration druid: detecting NAT: it always detects "symmetric nat" no > matter how many ports I forward from the router to the computer. > Just by chance I 've set the NAT traversal method to STUN (stun.ekiga.net) > and > the echo test to [EMAIL PROTECTED] works with echo of my voice. > The configuration druid still detects "symmetric nat" but video conferencing > is possible (although the sound is horrible, see my next messages). Hmmm... which ports do you open & forward? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga for win32 crashes when responding to a message
Dieter Rogiest a écrit : > I can send a chat message from my Ekiga (compiled 6/3/07 on Mandriva Linux > 2007) to my sister's Ekiga for win32 (2/3/07) but when she wants to answer > something back her Ekiga for win32 crashes. Sending a message gives a reliable crash ? That's strange since that code isn't platform specific... Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] "Directory nonexistent" error running "iptables rules" script
Jason Ryer a écrit : > ./ekiga.sh: 9: cannot create > /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout: Directory > nonexistent > ./ekiga.sh: 10: cannot create > /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout_stream: Directory > nonexistent > " > > Now what? What did I do wrong? Help? You don't have all netfilter modules in your kernel. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Installing Ekiga
Joe Ardolino a écrit : > I can't install Ekiga on a FC5 system using the downloaded RPMs > I keep getting a Dependency error message , missing a LIB ( > libpt_linux_x86_r.so.1.10.0) > > Can anyone give me a clue Install the libpt package first. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] command line mode ?
tom schuring a écrit : > i am wondering if ekiga has a "command-line" (or deamon) mode where > it doesn't show an interface but i can send it message (perhaps via > sockets ?) to setup a voice connection ? > > i haven't found anything in the documentation so i thought i'd ask here. There's a dbus component which allows to do things from outside a running ekiga, including from commandline. Unfortunately, said already running ekiga will still require a X server. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Opal audio plugin settings
Jure Petrovic a écrit : > I am really sorry to be such a bore with that, but now I see > Damien is back and Craig maybe also :-) > > > unsigned int recommendedFramesPerPacket; // = 2 > unsigned int maxFramesPerPacket; // = 2 > > Why ekiga still sends only 1 frame per packet? Where can I set that? Notice that "//" means the "= 2" is a comment. You may want to try : unsigned int recommendedFramesPerPacket = 2; unsigned int maxFramesPerPacket = 2; Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] [Ekiga-devel-list] Help me build our tested devices page.
Georgi Georgiev a écrit : > Regarding Firewire DV cameras (the ones with the avc1394 plugin), you > could explicitly mention that they work, period (or "should work" if you > so prefer). Right now the wiki says "Firewire camera supported by Linux > should work". No maker is going to put a "Linux compatible" logo on a > DV camera, so it may be a good idea to mention these. Oh, and such > cameras hardly fit in the Webcams category (or you could rename the > category to "Cameras"). > > I have personally used these two: SONY TRV-20[1] and a Canon IXY DV > S1[2]. On Linux, Firewire interface, AVC1394 plugin, no special driver > (in kernel firewire drivers are enough). Oldest tested version is kernel > 2.4.20. I have a Sony DCR TRV-8E, and it works when the linux firewire subsystem doesn't crash... While we're mentioning AVC, I have had regular reports about inverted colors (see http://bugzilla.gnome.org/show_bug.cgi?id=343408 )... they still came in after I committed a fix long ago, then disappeared, so perhaps this issue is dead. Snark ___ ekiga-list mailing list [EMAIL PROTECTED] http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Jitter problem with pulseaudio and ekiga
Zoho Vignochi a écrit : > The problem is as soon as I place a test call the jitter buffer > overflows and I hear only a second of speech and then nothing. I also > can't disconnect the call and have to kill ekiga. I am attaching some > output of ekiga -d 4 All of the output would be nice -- which ekiga version is it ? Snark on #ekiga ___ ekiga-list mailing list [EMAIL PROTECTED] http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Feature proposal.
W.P. a écrit : > Hello, Damien & others. > I have a feature proposal for (some) next version of Ekiga: > 1). ability to launch command/script when event > (ringing/dialing/hang-up/etc) happens. DBUS ? Snark ___ ekiga-list mailing list [EMAIL PROTECTED] http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] sound problems (stuttering)
Sebastiaan van Erk a écrit : > Hi, thanks for the quick answer. That fixed the sound problem. However > now I have the same problem as with twinkle; when I hang up the call, > Ekiga hangs. Can we have a stack trace ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] sound problems (stuttering)
Sebastiaan van Erk a écrit : > Julien Puydt wrote: >> Sebastiaan van Erk a écrit : >> >>> Hi, thanks for the quick answer. That fixed the sound problem. However >>> now I have the same problem as with twinkle; when I hang up the call, >>> Ekiga hangs. >>> >> Can we have a stack trace ? > Sure Thanks, but could you "thread apply all bt" in gdb, so we see all threads? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Remote user rejected the call
Moshe Kamensky a écrit : > * Damien Sandras <[EMAIL PROTECTED]> [25/04/07 14:30]: >> Le mercredi 25 avril 2007 à 12:22 +0300, Moshe Kamensky a écrit : >>> Hi, >>> >>> I am trying to connect to machines, both running ekiga 2.0.9. From >>> either end I can not make the connection. The 'General History' shows >>> the message "Remote user rejected the call". When I run with -d 4, I get >>> lines as follows, each time I try to connect: >>> >>> 2007/04/25 10:55:30.755 35:59.885OnRelease:85dc678 >>> GMSIPEndpointSIP connection released >>> 2007/04/25 10:55:30.756 35:59.886OnRelease:85dc678 >>> GMManagerWill release the connection >>> 2007/04/25 10:55:30.756 35:59.887OnRelease:8666120 >>> GMPCSSEndpoint PCSS connection released >>> 2007/04/25 10:55:30.757 35:59.887OnRelease:8666120 >>> GMManagerWill release the connection >>> >>> What is the problem? >>> >> We need the full -d 4 output, not only the end. > > Here it is: > > 2007/04/25 15:08:05.838 0:00.410ekiga > Detected audio plugins: OSS,ALSA > 2007/04/25 15:08:05.839 0:00.410ekiga > Detected video plugins: Picture,1394AVC,V4L,V4L2,1394DC > 2007/04/25 15:08:05.839 0:00.411ekiga > Detected audio plugins: OSS,ALSA > 2007/04/25 15:08:05.840 0:00.411ekiga > Detected video plugins: Picture,1394AVC,V4L,V4L2,1394DC > 2007/04/25 15:08:05.930 0:00.501ekiga > Detected the following audio input devices: Default,HDA Intel with plugin ALSA > 2007/04/25 15:08:05.930 0:00.501ekiga > Detected the following audio output devices: Default,HDA Intel with plugin > ALSA > 2007/04/25 15:08:05.930 0:00.501ekiga > Detected the following video input devices: No device found with plugin V4L2 > 2007/04/25 15:08:05.930 0:00.501ekiga > Detected the following audio input devices: Default,HDA Intel with plugin ALSA > 2007/04/25 15:08:05.930 0:00.501ekiga > Detected the following audio output devices: Default,HDA Intel with plugin > ALSA > 2007/04/25 15:08:05.930 0:00.501ekiga > Detected the following video input devices: No device found with plugin V4L2 > 2007/04/25 15:08:06.423 0:00.994ekiga Ekiga > version 2.0.9 > 2007/04/25 15:08:06.423 0:00.994ekiga OPAL > version 2.2.8 > 2007/04/25 15:08:06.423 0:00.994ekiga PWLIB > version 1.10.7 > 2007/04/25 15:08:06.423 0:00.994ekiga GNOME > support disabled > 2007/04/25 15:08:06.423 0:00.994ekiga > Fullscreen support enabled > 2007/04/25 15:08:06.423 0:00.994ekiga DBUS > support enabled > 2007/04/25 15:08:06.425 0:00.996ekiga Set > TCP port range to 3:30010 > 2007/04/25 15:08:06.425 0:00.996ekiga Set > RTP port range to 5000:5059 > 2007/04/25 15:08:06.425 0:00.996ekiga Set > UDP port range to 5060:5100 > 2007/04/25 15:08:33.127 0:27.698OnRelease:85c2818 > GMSIPEndpoint SIP connection released > 2007/04/25 15:08:33.130 0:27.701OnRelease:85c2818 > GMManager Will release the connection > 2007/04/25 15:08:33.132 0:27.703OnRelease:85c3230 > GMPCSSEndpoint PCSS connection released > 2007/04/25 15:08:33.132 0:27.703OnRelease:85c3230 > GMManager Will release the connection Uh... are you sure it is both : - a -d 4 - of a session showing the problem ? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] External control of Ekiga client (eg via Java API)
Joe Desbonnet a écrit : > Is it possible to control the Ekiga client via some API? In particular > I am interested in call control -- I'd like to be able to implement a > "Call" button next to a telephone number in a database application. DBUS should allow what you want. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] External control of Ekiga client (eg via Java API)
Joe Desbonnet a écrit : > Is there any docs or examples on the DBus interface? doc/using_dbus.html Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] feature wish: recording the conversation
Ma Begaj a écrit : > Hi, > > I just had a few conversations with Ekiga and there is on option which > I really needed today: recording a conversation. > > The person I called told me a lot of numbers and data, and it would > have really nice if there would be a small record button in the main > GUI. > > what do you think about this? We know : http://bugzilla.gnome.org/show_bug.cgi?id=330276 Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga on OpenBSD
Yoriaki FUJIMORI a écrit : > Just a piece of information. > Not OpenBSD, but on FreeBSD 6.2R, you can compile > ekiga 2.0.4, including relevant pwlib and opal. Is it possible to update to ekiga 2.0.9 ? 2.0.4 is pretty old already. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga "configuration" error
arnuld a écrit : > i can not download the stable Ekiga as download hangs/freezez. so i > downloaded the CVS snapshot and when i try to configure it i get this > error: > > [EMAIL PROTECTED] ekiga]$ ./autogen.sh --with-prefix=/usr --sysconfdir=/etc/ > checking for autoconf >= 2.53... > testing autoconf2.50... not found. > testing autoconf... found 2.61 > checking for automake >= 1.8... > testing automake-1.8... not found. > testing automake-1.9... not found. > ***Error***: You must have automake >= 1.8 installed > to build ekiga. Download the appropriate package for > from your distribution or get the source tarball at > http://ftp.gnu.org/pub/gnu/automake/automake-1.8.tar.gz > > i don't get it, i have "automake 1.10" installed on my system, CRUX > 2.3 i686. what to do ? i can not build as "make" does not run I'm not sure you should really try to compile ekiga by yourself if you're that inexperienced in compiling things yourself... Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga "configuration" error
arnuld a écrit : >> On 5/23/07, Julien Puydt <[EMAIL PROTECTED]> wrote: >> I'm not sure you should really try to compile ekiga by yourself if >> you're that inexperienced in compiling things yourself... > > that is the only option i have. BTW, i opened "configure.in" file but > did not find any "automake" there.i know i need to change version > numbers of "autmake check" but i can't find where it checks for > automake. do you knwo ? You know, I really don't think you should care that much about this error at this very moment : did you compile pwlib & opal correctly before anyway ? I highly doubt so. Snark PS: http://wiki.ekiga.org/index.php/Additional_Information will certainly help you. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga "configuration" error
arnuld a écrit : >> On 5/23/07, Julien Puydt <[EMAIL PROTECTED]> wrote: > >> You know, I really don't think you should care that much about this >> error at this very moment : > > because of that error, Makefile is not created, so i cannot run make > to compile. Yes, I know : my point was that there's no need to try to compile ekiga if you don't have the basic dependencies (you only mention you did them in this very mail!). >> did you compile pwlib & opal correctly >> before anyway ? I highly doubt so. > > i compiled their CVS snapshots and did not have any problem. they are > fine. i looked at "AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, > AC_PACKAGE_VERSION)" i think this is the line responsible for error. > > i have also found "REQUIRED_AUTOMAKE_VERSION" in "autogen.sh" but > changing it doe snot make any difference, except that it echoes the > changed version Ok, let's fix this automake issue : ekiga's autogen.sh calls gnome-autogen.sh : this is where the REQUIRED_AUTOMAKE_VERSION is used, and where the automake check is done. The one I have here does know about automake 1.10 -- but notice it seems to look after it under the name automake-1.10. Check your own gnome-autogen.sh to see exactly what it is looking for. There's probably a bug to report in your distribution there. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga "configuration" error
arnuld a écrit :
>> On 5/23/07, Julien Puydt <[EMAIL PROTECTED]> wrote:
>
>
>> Ok, let's fix this automake issue : ekiga's autogen.sh calls
>> gnome-autogen.sh : this is where the REQUIRED_AUTOMAKE_VERSION is used,
>> and where the automake check is done. The one I have here does know
>> about automake 1.10 -- but notice it seems to look after it under the
>> name automake-1.10.
>>
>> Check your own gnome-autogen.sh to see exactly what it is looking for.
>> There's probably a bug to report in your distribution there.
>
> Snark, it is in "/usr/bin/gnome-autogen.sh". it says this:
>
> REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.4}
>
> what is the meaning of "-1.4" ?
It means that if ekiga doesn't precise the required automake version,
then it will require 1.4.
> and this checks versions:
>
> # Usage:
> # compare_versions MIN_VERSION ACTUAL_VERSION
> # returns true if ACTUAL_VERSION >= MIN_VERSION
> compare_versions() {
> ch_min_version=$1
> ch_actual_version=$2
> ch_status=0
> IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="."
> set $ch_actual_version
> for ch_min in $ch_min_version; do
> ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
> if [ -z "$ch_min" ]; then break; fi
> if [ -z "$ch_cur" ]; then ch_status=1; break; fi
> if [ $ch_cur -gt $ch_min ]; then break; fi
> if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
> done
> IFS="$ch_save_IFS"
> return $ch_status
> }
>
> # Usage:
> # version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
> # checks to see if the package is available
> version_check() {
> vc_package=$1
> vc_variable=$2
> vc_checkprogs=$3
> vc_min_version=$4
> vc_source=$5
> vc_status=1
>
> vc_checkprog=`eval echo "\\$$vc_variable"`
> if [ -n "$vc_checkprog" ]; then
> printbold "using $vc_checkprog for $vc_package"
> return 0
> fi
>
> if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
> vc_comparator="="
> else
> vc_comparator=">="
> fi
> printbold "checking for $vc_package $vc_comparator $vc_min_version..."
> for vc_checkprog in $vc_checkprogs; do
> echo $ECHO_N " testing $vc_checkprog... "
> if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
> vc_actual_version=`$vc_checkprog --version | head -n 1 | \
>sed 's/^.*[]\([0-9.]*[a-z]*\).*$/\1/'`
> if compare_versions $vc_min_version $vc_actual_version; then
> echo "found $vc_actual_version"
> # set variables
> eval "$vc_variable=$vc_checkprog; \
> ${vc_variable}_VERSION=$vc_actual_version"
> vc_status=0
> break
> else
> echo "too old (found version $vc_actual_version)"
> fi
> else
> echo "not found."
> fi
> done
>
>
>
>
> and this prints the error:
>
> if [ "$vc_status" != 0 ]; then
> printerr "***Error***: You must have $vc_package $vc_comparator
> $vc_min_version installed"
> printerr " to build $PKG_NAME. Download the appropriate package for"
> printerr " from your distribution or get the source tarball at"
> printerr "$vc_source"
> printerr
> fi
> return $vc_status
> }
>
>
> what should i do ?
>
Search for the following piece of code :
case $REQUIRED_AUTOMAKE_VERSION in
1.4*) automake_progs="automake-1.4" ;;
1.5*) automake_progs="automake-1.10 automake-1.9 automake-1.8
automake-1.7 a
utomake-1.6 automake-1.5" ;;
1.6*) automake_progs="automake-1.10 automake-1.9 automake-1.8
automake-1.7 a
utomake-1.6" ;;
1.7*) automake_progs="automake-1.10 automake-1.9 automake-1.8
automake-1.7"
;;
1.8*) automake_progs="automake-1.10 automake-1.9 automake-1.8" ;;
1.9*) automake_progs="automake-1.10 automake-1.9" ;;
1.10*) automake_progs="automake-1.10" ;;
esac
it gives the names and priority under which the automake executables are
searched. Do you have "automake-1.10" in your path ?
Snark
___
ekiga-list mailing list
ekiga-list@gnome.org
http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga "configuration" error
arnuld a écrit : >> On 5/23/07, Julien Puydt <[EMAIL PROTECTED]> wrote: > >>> what is the meaning of "-1.4" ? >> It means that if ekiga doesn't precise the required automake version, >> then it will require 1.4. > > ok, thanks. i will call it the "default fallback" ;-) > >> Search for the following piece of code : >> >> case $REQUIRED_AUTOMAKE_VERSION in >> 1.4*) automake_progs="automake-1.4" ;; >> 1.5*) automake_progs="automake-1.10 automake-1.9 automake-1.8 >> automake-1.7 a >> utomake-1.6 automake-1.5" ;; >> [SNIP].. >> it gives the names and priority under which the automake executables are >> searched. Do you have "automake-1.10" in your path ? > > > NO i dont have it. see: > > case $REQUIRED_AUTOMAKE_VERSION in > 1.4*) automake_progs="automake-1.4" ;; > 1.5*) automake_progs="automake-1.5 automake-1.6 automake-1.7 > automake-1.8 automake-1.9" ;; > 1.6*) automake_progs="automake-1.6 automake-1.7 automake-1.8 > automake-1.9" ;; > 1.7*) automake_progs="automake-1.7 automake-1.8 automake-1.9" ;; > 1.8*) automake_progs="automake-1.8 automake-1.9" ;; > 1.9*) automake_progs="automake-1.9" ;; > esac > version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \ > > "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz"; > || DIE=1 > ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/ > > > i should add "1.10" there like you wrote ? > > so this a BUG of my distro ? Well, I guess your distribution doesn't ship a recent enough gnome-common package. Here I see in this package's ChangeLog : 2006-12-01 Kjartan Maraas <[EMAIL PROTECTED]> * macros2/gnome-autogen.sh: Make automake 1.10 work too. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Webcam Doesn't Scale
Jack Deslippe a écrit : > Thanks for the reply. So, I guess ekiga has no plans on fixing/changing > this? Is there any workaround or another driver I can try? Ekiga cannot do anything to fix this : it asks something to the driver, the drivers answers ok and does stupid things... There are two ways out : - the driver is modified to really support what ekiga wants ; - the driver is modified to be honest and return an error when asked something it can't do. Both ways are on the driver side. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Webcam Doesn\'t Scale
Palo S. a écrit : > I have the same problem of image not scaling with > Labtec Pro. It uses gspca too, however, the driver > reports \"minw 176 minh 144\" (ie it knows that QCIF > is not supported so the problem is not here in this > case). This is with 2.0.9 version of Ekiga on > 2.6.20-1.2933.fc6 kernel. Then obviously the answer to the problem is the same... or did you ask something different ? Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Webcam Doesn\'t Scale
Palo S. a écrit : > If I understand it correctly, Damien and you say > that the problem is caused by the driver advertising > it supports QCIF when it does not. But in my case the > driver knows that QCIF is not supported - so I assume > that the problem lies somewhere else? Or do you mean > that the driver may still advertise it supports QCIF > to Ekiga even though it internally knows that it does > not? (Is there a simple way to find this out?) The driver knows it can't do that. But when asked to do it, it crops the image without complaining to ekiga. If at least it complained ekiga would try something else. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Webcam Doesn\'t Scale
Jack Deslippe a écrit : > Ok, thanks everyone for answering my question. I have forwarded the > responses to Michel Xhaard the maintainer of the gspca driver to see if > he can help at all. On a related issue, I think it would be nice for > ekiga to support more than one video size (I think QCIF is pretty > small). I am also interested in full screen option. Are these features > planed in the future? Perhaps in ekiga 3.0? Don't we already have fullscreen? Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] webcam in ekiga
Shane Helms wrote: > I don't know what else to check. > Any ideas? The archives of this mailing-list? Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] pb ekiga
pierre dantzer wrote: > (note : Skype works at home). Note: skype has both: 1) big servers out there 2) and leech their users to help you go in/out firewalls... ekiga doesn't. Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Cannot Receive H.323 or SIP Calls
Rich Shepard wrote: >Yesterday I installed Ekiga-2.0.9, and configured the audio for the > Logitech boom headset (the video's not yet working, but that's a different > issue). > >Today, after loading the webcam modules, I invoked ekiga and had two > informational message windows open. One tells me that I cannot receive H.323 > calls and the other tells me that I cannot receive SIP calls. Neither > message appeared yesterday. > >There's nothing in the manual or the FAQ about this. I'd greatly > appreciate some suggestions from experienced users. Do you have network on the box ? If so, does ekiga listen on the right interface? If so, does another program already own said interface (well, already listens on the ports ekiga would like to use, to be more precise)? Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] how create an account h.323
enzo wrote: > I'have an account sip and it seems to works with ekiga ( I only tested > iy with sip:[EMAIL PROTECTED] ) Yes, ekiga.net provides SIP accounts. > I also want to register an account H.323 just to test it, but I didn't > found how make the registration. > Can someone tell me how or where connect to to register an account h.323 ' No, ekiga.net doesn't provide H.323 accounts. Snark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] as netmeeting
[EMAIL PROTECTED] wrote: > ekiga is often compared with netmeeting. My question: Can I operate > in the same way : give somebody my IP and allow him control my > appliance (or desktop) like it's possible in netmeeting? If > yes which steps are essential (where is this described). In the FAQ > I didn't found this covered. Ekiga does audio+video, it doesn't do remote desktop. Besides, I hope ekiga isn't that often compared to netmeeting, as it's : (1) dead (2) not standard-compliant Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Registration failed
Ralf Baales wrote: > Hello, after installing and configuration of ekiga with KDE the > following failure happens every time i'l try to log in: > > "Registration failed" > What's going wrong? What did the firewall test give, in the druid? Snark on #ekiga ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
