Re: [Ekiga-list] ekiga 3.2.7-5+b1 - Debian wheezy - webcam problem
On Fri, 19 Oct 2012 21:15:53 +0200 Eugen Dedu wrote: > Ok, the error is the following: > 2012/10/19 18:47:54.461 0:36.755 > CallSetup:...4bc8e61700 SIP PDU Write failed: Invalid > argument > > Unfortunately, I cannot understand why this may happen. This > appeared for another user too. > > To debug this error, the only thing I see is to build opal and check > throughly why it triggers this error. > > For me, the simplest method is that I have access to your machine and > do all the necessary tests, by sharing your screen with me, so that > you see all that I do. Are you ok with this or not? I understand > that some people refuse this. It turns out all this was due to me trying to call a number without the hostname - a full URI is needed, though oddly that seemed to fail when I tried that. At least we've got to the bottom of it now... -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://phil.tinsleyviaduct.com/ ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ekiga 3.2.7-5+b1 - Debian wheezy - webcam problem
On Fri, 19 Oct 2012 18:58:06 +0100 Phil Reynolds wrote: > On Thu, 18 Oct 2012 20:49:15 +0200 > Eugen Dedu wrote: > > > On 18/10/12 20:32, Phil Reynolds wrote: > > > On Thu, 18 Oct 2012 19:51:06 +0200 > > > Eugen Dedu wrote: > > > > > >> On 18/10/12 19:43, Phil Reynolds wrote: > > >>> On Wed, 17 Oct 2012 19:19:07 +0200 > > >>> Eugen Dedu wrote: > > >>> > > >>>> On 03/10/12 20:20, Phil Reynolds wrote: > > >>>>> The version of ekiga in Debian wheezy is not being very nice > > >>>>> with my laptop's webcam - one uvcvideo supports, ID 04f2:b2fe. > > >>>>> > > >>>>> ekiga says it cannot set the resolution - but takes a firm > > >>>>> hold and prevents any other app from using it. > > >>>> > > >>>> Now, that ekiga 3.9.90 is in experimental, could you try it out > > >>>> and tell if it works now? > > >>>> > > >>> > > >>> It's happy with the camera, but calls all just plain fail - a > > >>> window comes up but the call never goes anywhere. > > >> > > >> Good to hear that camera works. > > >> > > >> Could you explain more precisely what is the problem and what > > >> happens? > > > > > > ekiga registers with my asterisk setup, but when I try to make a > > > call, nothing shows on asterisk, and the call window appears > > > briefly, showing a status of "Standby", with the main ekiga window > > > showing "Call completed" on the bottom line. > > > > Aha! Just send us the -d 4 output then. > > > > Second attempt, only 3 audio codecs selected... > And one more without H264 as well... -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://phil.tinsleyviaduct.com/ ekigad43.txt.gz Description: GNU Zip compressed data ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ekiga 3.2.7-5+b1 - Debian wheezy - webcam problem
On Thu, 18 Oct 2012 20:49:15 +0200 Eugen Dedu wrote: > On 18/10/12 20:32, Phil Reynolds wrote: > > On Thu, 18 Oct 2012 19:51:06 +0200 > > Eugen Dedu wrote: > > > >> On 18/10/12 19:43, Phil Reynolds wrote: > >>> On Wed, 17 Oct 2012 19:19:07 +0200 > >>> Eugen Dedu wrote: > >>> > >>>> On 03/10/12 20:20, Phil Reynolds wrote: > >>>>> The version of ekiga in Debian wheezy is not being very nice > >>>>> with my laptop's webcam - one uvcvideo supports, ID 04f2:b2fe. > >>>>> > >>>>> ekiga says it cannot set the resolution - but takes a firm hold > >>>>> and prevents any other app from using it. > >>>> > >>>> Now, that ekiga 3.9.90 is in experimental, could you try it out > >>>> and tell if it works now? > >>>> > >>> > >>> It's happy with the camera, but calls all just plain fail - a > >>> window comes up but the call never goes anywhere. > >> > >> Good to hear that camera works. > >> > >> Could you explain more precisely what is the problem and what > >> happens? > > > > ekiga registers with my asterisk setup, but when I try to make a > > call, nothing shows on asterisk, and the call window appears > > briefly, showing a status of "Standby", with the main ekiga window > > showing "Call completed" on the bottom line. > > Aha! Just send us the -d 4 output then. > Second attempt, only 3 audio codecs selected... -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://phil.tinsleyviaduct.com/ ekigad42.txt.gz Description: GNU Zip compressed data ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ekiga 3.2.7-5+b1 - Debian wheezy - webcam problem
On Thu, 18 Oct 2012 19:51:06 +0200 Eugen Dedu wrote: > On 18/10/12 19:43, Phil Reynolds wrote: > > On Wed, 17 Oct 2012 19:19:07 +0200 > > Eugen Dedu wrote: > > > >> On 03/10/12 20:20, Phil Reynolds wrote: > >>> The version of ekiga in Debian wheezy is not being very nice with > >>> my laptop's webcam - one uvcvideo supports, ID 04f2:b2fe. > >>> > >>> ekiga says it cannot set the resolution - but takes a firm hold > >>> and prevents any other app from using it. > >> > >> Now, that ekiga 3.9.90 is in experimental, could you try it out and > >> tell if it works now? > >> > > > > It's happy with the camera, but calls all just plain fail - a window > > comes up but the call never goes anywhere. > > Good to hear that camera works. > > Could you explain more precisely what is the problem and what happens? ekiga registers with my asterisk setup, but when I try to make a call, nothing shows on asterisk, and the call window appears briefly, showing a status of "Standby", with the main ekiga window showing "Call completed" on the bottom line. -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://phil.tinsleyviaduct.com/ ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] ekiga 3.2.7-5+b1 - Debian wheezy - webcam problem
On Wed, 17 Oct 2012 19:19:07 +0200 Eugen Dedu wrote: > On 03/10/12 20:20, Phil Reynolds wrote: > > The version of ekiga in Debian wheezy is not being very nice with my > > laptop's webcam - one uvcvideo supports, ID 04f2:b2fe. > > > > ekiga says it cannot set the resolution - but takes a firm hold and > > prevents any other app from using it. > > Now, that ekiga 3.9.90 is in experimental, could you try it out and > tell if it works now? > It's happy with the camera, but calls all just plain fail - a window comes up but the call never goes anywhere. -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://phil.tinsleyviaduct.com/ ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] ekiga 3.2.7-5+b1 - Debian wheezy - webcam problem
The version of ekiga in Debian wheezy is not being very nice with my laptop's webcam - one uvcvideo supports, ID 04f2:b2fe. ekiga says it cannot set the resolution - but takes a firm hold and prevents any other app from using it. Provided ekiga is not running, the camera works normally. -- Phil Reynolds mail: phil-ek...@tinsleyviadect.com ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] Ekiga 3.2.7 - falls off PBX, and on Linux, sometimes hangs
I am using ekiga 3.2.7 on both Windows 7 and Debian squeeze. I have noticed that, on both systems, after a while, ekiga has unregistered from my Asterisk box. It will not re-register without being closed down again first. On Debian, it fails to quit, leaving its tray icon behind, and has to be killed. Also, an effect I've only noticed on Debian so far, after making a call, ekiga sometimes hangs when I hang up. It has to be forced to quit. Is there anything I can do to fix this? I appreciate more information might be needed - I will try to get it, given directions. Alternatively, is it a known problem that will be fixed in a near future release? -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com This message was sent using IMP, the Internet Messaging Program. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] ekiga 3.2.6 (Debian lenny backport) - not picking up microphone under alsa
I have recently installed the Debian lenny backport of ekiga 3.2.6, and have found that it does not work with a microphone connected to my keyboard (Enermax KB-007U) under alsa, though other applications work with it. ekiga can use it only under OSS. I cannot see any obvious reason why that would be - can anyone advise? Also, should it be possible for me to see the status of other users on my asterisk server? It works with X-Lite, but does not do anything with ekiga. -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] strange incoming calls from unknown callers
Quoting H.S. : Phil Reynolds wrote: Quoting H.S. : Hello, I have noticed I occasionally get calls from unknown callers. I supposed others have had similar experiences? What gives? Low-lifes trying to make SIP/H323 connections direct to random machines. I am curious. What is the motivation for this? Is this similar to random port scan a machine with a public IP gets (/var/log/auth.log is full or SSH attempts)? Possible SPIT attempts perhaps... -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] strange incoming calls from unknown callers
Quoting H.S. : Hello, I have noticed I occasionally get calls from unknown callers. I supposed others have had similar experiences? What gives? Low-lifes trying to make SIP/H323 connections direct to random machines. -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] h263 in Debian lenny / bare number dial
Quoting "Eugen Dedu" : Phil Reynolds wrote: Quoting "Eugen Dedu" : Phil Reynolds wrote: Quoting "Eugen Dedu" : Hi, Phil Reynolds wrote: I am trying to get ekiga to work in Debian lenny, with the H263 codec, but when I build opal, H263 is not supported. I am currently backporting packages from experimental. What do I need to do to get h263? Is there a better way to do this, remaining otherwise on lenny? You must install libavcodec-dev not from debian (h263 is not dfsg), but from other site, for ex. http://debian-multimedia.org. It seems that ptlib wants libdc1394-13-dev and libavcodec-dev installs -22-dev - these are conflicting requirements that in turn cause there to be no h263. Indeed (http://bugzilla.gnome.org/show_bug.cgi?id=545017). I always compile ptlib with libdc1394-13-dev, and install -22-dev right before compiling opal. Still no h263 here even when I do that. Please send the output of configure of opal. Here's what it shows. I only get H.261 and theora: #don't build h263-ffmpeg codec because it uses an unmaintained binary ./configure --build x86_64-linux-gnu --prefix=/usr --disable-ffmpeg-h263 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for g++... g++ checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for ar... ar configure: gcc version is 4.3.2 checking if gcc version is valid... yes checking for working bit scan intrinsic... yes configure: Opal version is 3.4.2 checking where plugins are being installed... /usr/lib/opal-3.4.2 checking wether to build a shared library... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking Debugging support... no checking for PTLIB... yes Version: 2.4.2 CFLAGS: -DPTRACING=1 -D_REENTRANT -D_GNU_SOURCE=1 -fno-exceptions -I/usr/inclu de/SDL CXXFLAGS: -felide-constructors -Wreorder DEBUG:-lpt_d -lpthread -lsasl2 -lldap -llber -lldap_r -lssl -lcrypto -lexpat -lSDL -lodbc -lresolv -ldl RELEASE: -lpt -lpthread -lsasl2 -lldap -llber -lldap_r -lssl -lcrypto -lexpat - lSDL -lodbc -lresolv -ldl checking ptlib version... 2.4.2 checking PTLIB has SSL... yes checking PTLIB has ASN.1... yes checking PTLIB has expat... yes checking PTLIB has video... yes checking PTLIB has wavfile... yes checking PTLIB has vxml... yes checking PTLIB has ipv6... yes checking PTLIB has dtmf... yes checking PTLIB has ldap... yes checking PTLIB has dns... yes checking PTLIB has audio... yes checking PTLIB has config... yes checking PTLIB has option ssl/aes... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking how to run the C++ preprocessor... g++ -E checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking if dlopen is available... yes checking for dlopen in -ldl... yes checking for short... yes checking size of short... 2 checking for int... yes checking size of int... 4 checking for long... yes checking size of long... 8 checking for long long... yes checking size of long long... 8 checking for SPEEXDSP... yes checking speex/speex.h usability... yes checking speex/speex.h presence... yes checking for speex/speex.h... yes checking for speex/speex.h... (cached) yes checking Speex has float... no checking ZRTP protocol support... no checking libsrtp support... no checking jni.h usability... no checking jni.h presence... no checking for jni.h... no checking whether to enable video codec support... yes checking whether to enable SIP protocol support... yes checking whether to enable H.323 protocol support... yes checking whether to enable IAX2 protocol support... yes checking whether to enable H.224 protocol support... yes checking whether to enable T.38 capability support... yes checking whether to enable T.38 FAX protocol support... yes checking whether to enable H.450... yes checking whether to enable H.460... yes checking wheth
Re: [Ekiga-list] h263 in Debian lenny / bare number dial
Quoting "Eugen Dedu" : Phil Reynolds wrote: Quoting "Eugen Dedu" : Hi, Phil Reynolds wrote: I am trying to get ekiga to work in Debian lenny, with the H263 codec, but when I build opal, H263 is not supported. I am currently backporting packages from experimental. What do I need to do to get h263? Is there a better way to do this, remaining otherwise on lenny? You must install libavcodec-dev not from debian (h263 is not dfsg), but from other site, for ex. http://debian-multimedia.org. It seems that ptlib wants libdc1394-13-dev and libavcodec-dev installs -22-dev - these are conflicting requirements that in turn cause there to be no h263. Indeed (http://bugzilla.gnome.org/show_bug.cgi?id=545017). I always compile ptlib with libdc1394-13-dev, and install -22-dev right before compiling opal. Still no h263 here even when I do that. -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] h263 in Debian lenny / bare number dial
Quoting "Eugen Dedu" : Hi, Phil Reynolds wrote: I am trying to get ekiga to work in Debian lenny, with the H263 codec, but when I build opal, H263 is not supported. I am currently backporting packages from experimental. What do I need to do to get h263? Is there a better way to do this, remaining otherwise on lenny? You must install libavcodec-dev not from debian (h263 is not dfsg), but from other site, for ex. http://debian-multimedia.org. It seems that ptlib wants libdc1394-13-dev and libavcodec-dev installs -22-dev - these are conflicting requirements that in turn cause there to be no h263. With ekiga 2.*, I could send sip:number to my Asterisk box and it would dial that number in the context. I have to put @fqdn on the end now for that to work - is there, or will there be, a way to fix this? I think that this automatic completion was removed, in order to have a proper address (think to e-mails: you put always the host address too). However, it has now an autocompletion feature (à la firefox). But you don't when mailing within the same system. Also, allowing a bare number would make it more telephone-like. Not doing so will make it difficult for another potential user here (not me). -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] h263 in Debian lenny / bare number dial
I am trying to get ekiga to work in Debian lenny, with the H263 codec, but when I build opal, H263 is not supported. I am currently backporting packages from experimental. What do I need to do to get h263? Is there a better way to do this, remaining otherwise on lenny? With ekiga 2.*, I could send sip:number to my Asterisk box and it would dial that number in the context. I have to put @fqdn on the end now for that to work - is there, or will there be, a way to fix this? -- Phil Reynolds mail: phil-ek...@tinsleyviaduct.com Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list