[Ekiga-list] Ekiga does not start
Hello, I have compiled Ekiga (latest version) on Zenwalk Snapshot. Compilation went on properly without any error message. But when I start the program, nothing happens. What should I do? Thanks for your help, Anand ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Ananda Murthy R S wrote: Hello, I have compiled Ekiga (latest version) on Zenwalk Snapshot. Compilation went on properly without any error message. But when I start the program, nothing happens. What should I do? Is the process running or does it finish immediately? Start ekiga with -d 4 and send us the output. -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Hello Eugen, Thanks for your immediate reply. This is the output I got after giving the command ekiga -d 4: ekiga_start.log dyna.cxx(111)H264DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H264DYNASuccessfully loaded libavcodec library and verified functions h264pipe_unix.cxx(301)H264IPCPP: Found GPL process executable in /usr/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper x264loader_unix.cxx(114)H264DYNATrying to open x264 library libx264.so.66 x264loader_unix.cxx(131)H264DYNASuccessfully loaded libx264.so.66 x264loader_unix.cxx(103)H264DYNALoader was compiled with x264 build 66 present x264loader_unix.cxx(106)H264DYNASuccessfully loaded libx264 library and verified functions h264pipe_unix.cxx(118)H264IPCPP: Successfully forked child process 2928 and established communication h264-x264.cxx(853)H264CodecEnabled dyna.cxx(111)H263+DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H263+DYNASuccessfully loaded libavcodec library and verified functions h263-1998.cxx(2094)H.263CodecEnabled with 4 definitions dyna.cxx(111)MPEG4DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)MPEG4DYNASuccessfully loaded libavcodec library and verified functions mpeg4.cxx(1993)MPEG4CodecEnabled 2009/06/04 21:17:56.062 0:00.271 Version 3.2.4 by on Unix Linux (2.6.29.2-i686) with PTLib (v2.6.2) at 2009/6/4 21:17:56.061 2009/06/04 21:17:56.063 0:00.272 Ekiga git revision: unknown 2009/06/04 21:17:56.064 0:00.273 Ekiga registered on D-Bus: org.ekiga.Ekiga h264helper_unix.cxx(72)H264IPCCP: Terminating Anand On Thu, Jun 4, 2009 at 8:52 AM, Eugen Dedu eugen.d...@pu-pm.univ-fcomte.frwrote: Ananda Murthy R S wrote: Hello, I have compiled Ekiga (latest version) on Zenwalk Snapshot. Compilation went on properly without any error message. But when I start the program, nothing happens. What should I do? Is the process running or does it finish immediately? Start ekiga with -d 4 and send us the output. -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
This is really interesting. First, move /usr/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper to another directory, so that it would b=not be found, and restart ekiga -d 4. Second, remove the file where it was and start ekiga through gdb, as shown at http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_stack_backtrace_from_a_crash Eugen Ananda Murthy R S wrote: Hello Eugen, Thanks for your immediate reply. This is the output I got after giving the command ekiga -d 4: ekiga_start.log dyna.cxx(111)H264DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H264DYNASuccessfully loaded libavcodec library and verified functions h264pipe_unix.cxx(301)H264IPCPP: Found GPL process executable in /usr/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper x264loader_unix.cxx(114)H264DYNATrying to open x264 library libx264.so.66 x264loader_unix.cxx(131)H264DYNASuccessfully loaded libx264.so.66 x264loader_unix.cxx(103)H264DYNALoader was compiled with x264 build 66 present x264loader_unix.cxx(106)H264DYNASuccessfully loaded libx264 library and verified functions h264pipe_unix.cxx(118)H264IPCPP: Successfully forked child process 2928 and established communication h264-x264.cxx(853)H264CodecEnabled dyna.cxx(111)H263+DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H263+DYNASuccessfully loaded libavcodec library and verified functions h263-1998.cxx(2094)H.263CodecEnabled with 4 definitions dyna.cxx(111)MPEG4DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)MPEG4DYNASuccessfully loaded libavcodec library and verified functions mpeg4.cxx(1993)MPEG4CodecEnabled 2009/06/04 21:17:56.062 0:00.271 Version 3.2.4 by on Unix Linux (2.6.29.2-i686) with PTLib (v2.6.2) at 2009/6/4 21:17:56.061 2009/06/04 21:17:56.063 0:00.272 Ekiga git revision: unknown 2009/06/04 21:17:56.064 0:00.273 Ekiga registered on D-Bus: org.ekiga.Ekiga h264helper_unix.cxx(72)H264IPCCP: Terminating Anand On Thu, Jun 4, 2009 at 8:52 AM, Eugen Dedu eugen.d...@pu-pm.univ-fcomte.frwrote: Ananda Murthy R S wrote: Hello, I have compiled Ekiga (latest version) on Zenwalk Snapshot. Compilation went on properly without any error message. But when I start the program, nothing happens. What should I do? Is the process running or does it finish immediately? Start ekiga with -d 4 and send us the output. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
After moving h264_video_pwplugin_helper I got this: ekiga -d 4 | tee ekiga_start.log dyna.cxx(111)H264DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H264DYNASuccessfully loaded libavcodec library and verified functions h264pipe_unix.cxx(297)H264IPCPP: Couldn't find GPL process executable in /usr/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper h264pipe_unix.cxx(297)H264IPCPP: Couldn't find GPL process executable in /usr/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper h264pipe_unix.cxx(297)H264IPCPP: Couldn't find GPL process executable in /usr/local/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper h264pipe_unix.cxx(297)H264IPCPP: Couldn't find GPL process executable in ./opal-3.6.2/codecs/video/h264_video_pwplugin_helper h264pipe_unix.cxx(71)H264IPCPP: Couldn't find GPL process executable: h264_video_pwplugin_helper h264-x264.cxx(838)H264CodecDisabled dyna.cxx(111)H263+DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H263+DYNASuccessfully loaded libavcodec library and verified functions h263-1998.cxx(2094)H.263CodecEnabled with 4 definitions dyna.cxx(111)MPEG4DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)MPEG4DYNASuccessfully loaded libavcodec library and verified functions mpeg4.cxx(1993)MPEG4CodecEnabled 2009/06/04 23:06:17.299 0:00.259 Version 3.2.4 by on Unix Linux (2.6.29.2-i686) with PTLib (v2.6.2) at 2009/6/4 23:06:17.298 2009/06/04 23:06:17.299 0:00.259 Ekiga git revision: unknown 2009/06/04 23:06:17.301 0:00.261 Ekiga registered on D-Bus: org.ekiga.Ekiga I will try running through gdb tomorrow. Anand On Thu, Jun 4, 2009 at 12:45 PM, Eugen Dedu eugen.d...@pu-pm.univ-fcomte.fr wrote: This is really interesting. First, move /usr/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper to another directory, so that it would b=not be found, and restart ekiga -d 4. Second, remove the file where it was and start ekiga through gdb, as shown at http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_stack_backtrace_from_a_crash Eugen Ananda Murthy R S wrote: Hello Eugen, Thanks for your immediate reply. This is the output I got after giving the command ekiga -d 4: ekiga_start.log dyna.cxx(111)H264DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H264DYNASuccessfully loaded libavcodec library and verified functions h264pipe_unix.cxx(301)H264IPCPP: Found GPL process executable in /usr/lib/opal-3.6.2/codecs/video/h264_video_pwplugin_helper x264loader_unix.cxx(114)H264DYNATrying to open x264 library libx264.so.66 x264loader_unix.cxx(131)H264DYNASuccessfully loaded libx264.so.66 x264loader_unix.cxx(103)H264DYNALoader was compiled with x264 build 66 present x264loader_unix.cxx(106)H264DYNASuccessfully loaded libx264 library and verified functions h264pipe_unix.cxx(118)H264IPCPP: Successfully forked child process 2928 and established communication h264-x264.cxx(853)H264CodecEnabled dyna.cxx(111)H263+DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)H263+DYNASuccessfully loaded libavcodec library and verified functions h263-1998.cxx(2094)H.263CodecEnabled with 4 definitions dyna.cxx(111)MPEG4DYNASuccessfully loaded 'libavcodec.so.52' dyna.cxx(337)MPEG4DYNASuccessfully loaded libavcodec library and verified functions mpeg4.cxx(1993)MPEG4CodecEnabled 2009/06/04 21:17:56.062 0:00.271 Version 3.2.4 by on Unix Linux (2.6.29.2-i686) with PTLib (v2.6.2) at 2009/6/4 21:17:56.061 2009/06/04 21:17:56.063 0:00.272 Ekiga git revision: unknown 2009/06/04 21:17:56.064 0:00.273 Ekiga registered on D-Bus: org.ekiga.Ekiga h264helper_unix.cxx(72)H264IPCCP: Terminating Anand On Thu, Jun 4, 2009 at 8:52 AM, Eugen Dedu eugen.d...@pu-pm.univ-fcomte.frwrote: Ananda Murthy R S wrote: Hello, I have compiled Ekiga (latest version) on Zenwalk Snapshot. Compilation went on properly without any error message. But when I start the program, nothing happens. What should I do? Is the process running or does it finish immediately? Start ekiga with -d 4 and send us the output. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Le lundi 12 février 2007 à 00:17 +0100, Tobias Eberle a écrit : Is accessibility enabled ? shouldn't. In the Gnome preferences I found: Keyboard accessibility features Assistive Technologies both are disabled. Clicking through the items in gconf-editor I notices the following: After I entered /apps/ekiga/general/user_interface/calls_history_window absolutely no values are displayed anymore, only the key names - for every key in gconf. Restarting gconf-editor leads to values appearing again (until I enter the directory above again). This seems a bit strange and does not happen with a newly created (Unix) user account. Try gdb ekiga type 'run' then when it freezes, hit Ctrl-C and type thread apply all bt -- _ Damien Sandras (o- //\Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Le lundi 12 février 2007 à 14:14 +0100, Tobias Eberle a écrit : Hello, Try gdb ekiga type 'run' then when it freezes, hit Ctrl-C and type thread apply all bt I have already done that. See my answer to the post from Jan yesterday. Did you kill it with Ctrl-C or with killall -9 ekiga ? Because the backtrace does not contain anything useful. You could also use strace and examine ekiga -d 4. -- _ Damien Sandras (o- //\Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Hello, Did you kill it with Ctrl-C or with killall -9 ekiga ? Because the backtrace does not contain anything useful. Ctrl-C You could also use strace and examine ekiga -d 4. I have solved it! In the strace output I found that it tried to access an sftp resource through gnome-vfs using libsftp. I have also noticed before that when I started gthumb it was asking for the password for the same sftp resource. (I have ignored that because I had no time to find the cause.) The reason for this behaviour is the following: I had added a bookmark to this resource to nautilus! After deleting this bookmark ekiga starts perfectly! :) What do you think, to whom should I file in a bug report? Thank you very much for helping me, I am happy to be able to use ekiga again (now I can delete linphone! :) ) Tobias ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Hi ! Le lundi 12 février 2007 à 20:20 +0100, Tobias Eberle a écrit : Hello, Did you kill it with Ctrl-C or with killall -9 ekiga ? Because the backtrace does not contain anything useful. Ctrl-C You could also use strace and examine ekiga -d 4. I have solved it! In the strace output I found that it tried to access an sftp resource through gnome-vfs using libsftp. I have also noticed before that when I started gthumb it was asking for the password for the same sftp resource. (I have ignored that because I had no time to find the cause.) The reason for this behaviour is the following: I had added a bookmark to this resource to nautilus! After deleting this bookmark ekiga starts perfectly! :) What do you think, to whom should I file in a bug report? gnome-vfs I suppose. We do not even rely on it. Thank you very much for helping me, I am happy to be able to use ekiga again (now I can delete linphone! :) ) Enjoy :P -- _ Damien Sandras (o- //\Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] Ekiga does not start
Hello, I have ekiga from the current Debian unstable (it's version 2.0.3). One day I had to restart my computer and since then ekiga does not start anymore. That means that starting ekiga in a console does not output anything, does not show a GUI but is also not terminating, so actually it is running. ekiga -d 6 output: 2007/02/11 12:47:30.217 0:00.463ekiga Detected audio plugins: ALSA 2007/02/11 12:47:30.218 0:00.464ekiga Detected video plugins: Picture,V4L 2007/02/11 12:47:30.218 0:00.464ekiga Detected audio plugins: ALSA 2007/02/11 12:47:30.218 0:00.464ekiga Detected video plugins: Picture,V4L 2007/02/11 12:47:30.260 0:00.506ekiga Detected the following audio input devices: Intel 82801DB-ICH4,Default with plugin ALSA 2007/02/11 12:47:30.260 0:00.506ekiga Detected the following audio output devices: Intel 82801DB-ICH4,Default with plugin ALSA 2007/02/11 12:47:30.260 0:00.506ekiga Detected the following video input devices: No device found with plugin V4L 2007/02/11 12:47:30.261 0:00.507ekiga Detected the following audio input devices: Intel 82801DB-ICH4,Default with plugin ALSA 2007/02/11 12:47:30.261 0:00.507ekiga Detected the following audio output devices: Intel 82801DB-ICH4,Default with plugin ALSA 2007/02/11 12:47:30.261 0:00.507ekiga Detected the following video input devices: No device found with plugin V4L 2007/02/11 12:47:30.303 0:00.549ekiga AVAHI Failed to create client: Daemon not running Killed that seems to be fine. I tried ekiga-config-tool --clean but this did not help. Using another user account (e.g. a new create one) ekiga is running perfectly. Does anybody has an idea what's happening here and how to fix it? I would be happy not to create a new user account and migrating all my settings to the new one. Thank you in advance, Tobias ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
On Sun, 11 Feb 2007 12:56:19 +0100 Tobias Eberle [EMAIL PROTECTED] wrote: Hello, I have ekiga from the current Debian unstable (it's version 2.0.3). One day I had to restart my computer and since then ekiga does not start anymore. That means that starting ekiga in a console does not output anything, does not show a GUI but is also not terminating, so actually it is running. ekiga -d 6 output: [...] Can you run it under gdb? $ gdb $(which ekiga) once it was killed: (gdb) threads apply all bt J. PS: Though, it doesn't look like a crash. -- God is real... unless declared as integer. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
On dim, 2007-02-11 at 12:56 +0100, Tobias Eberle wrote: Hello, Hi Tobias, I have ekiga from the current Debian unstable (it's version 2.0.3). One day I had to restart my computer and since then ekiga does not start anymore. That means that starting ekiga in a console does not output anything, does not show a GUI but is also not terminating, so actually it is running. ekiga -d 6 output: snip.../.../snip that seems to be fine. I tried ekiga-config-tool --clean but this did not help. Using another user account (e.g. a new create one) ekiga is running perfectly. Does anybody has an idea what's happening here and how to fix it? I would be happy not to create a new user account and migrating all my settings to the new one. Did you try to run gconf-editor and see if the key /apps/ekiga/general/user_interface/start_hidden is active ? (there should be a way to display that pair key/value from CLI, but I don't remember it) If yes either deactivate it, either try to check if your notfication area is still active in your panel. Thank you in advance, Hope that helps. Tobias Fabrice -- Fabrice ALPHONSO [EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Hello Jan, Can you run it under gdb? $ gdb $(which ekiga) once it was killed: (gdb) threads apply all bt Ekiga does not crash so once it was killed is not possible only after I have killed it. starting ekiga leads to lots of no debugging symbols found and ... [Thread debugging using libthread_db enabled] [New Thread -1247562048 (LWP 28845)] ... [New Thread -1250579536 (LWP 28848)] [New Thread -1250841680 (LWP 28849)] ... [New Thread -1254065232 (LWP 28854)] ... after I have killed it (gdb) thread apply all bt Thread 4 (Thread -1254065232 (LWP 28854)): #0 0xb6449ef9 in poll () from /lib/tls/libc.so.6 #1 0xb746abc9 in ?? () from /usr/lib/libglib-2.0.so.0 #2 0x0817c4f0 in ?? () #3 0x0009 in ?? () #4 0x in ?? () #5 0x0817c4f0 in ?? () #6 0x0009 in ?? () #7 0x in ?? () Thread 3 (Thread -1250841680 (LWP 28849)): #0 0xb65da189 in __lll_mutex_lock_wait () from /lib/tls/libpthread.so.0 #1 0xb65d6f6d in _L_mutex_lock_29 () from /lib/tls/libpthread.so.0 #2 0x0001 in ?? () #3 0x in ?? () Thread 2 (Thread -1250579536 (LWP 28848)): #0 0xb65d7e62 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/libpthread.so.0 #1 0xb7292734 in PSyncPoint::Wait () from /usr/lib/libpt.so.1.10.2 #2 0xb68d238e in OpalManager::GarbageMain () from /usr/lib/libopal.so.2.2 #3 0xb68d7555 in OpalManager::GarbageMain_PNotifier::Call () from /usr/lib/libopal.so.2.2 #4 0xb72a91ef in PSimpleThread::Main () from /usr/lib/libpt.so.1.10.2 #5 0xb72921f7 in PThread::PX_ThreadStart () from /usr/lib/libpt.so.1.10.2 #6 0xb65d50bd in start_thread () from /lib/tls/libpthread.so.0 #7 0xb64539ee in clone () from /lib/tls/libc.so.6 Thread 1 (Thread -1247562048 (LWP 28845)): #0 0xb65da189 in __lll_mutex_lock_wait () from /lib/tls/libpthread.so.0 #1 0xb65d6f6d in _L_mutex_lock_29 () from /lib/tls/libpthread.so.0 #2 0x0008 in ?? () #3 0xb74cd1e4 in ?? () from /usr/lib/libglib-2.0.so.0 #4 0x in ?? () I don't know how this helps... Tobias ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Hello, /apps/ekiga/general/user_interface/start_hidden is active ? (there should be a way to display that pair key/value from CLI, but I don't remember it) Is there a way to delete /apps/ekiga/? Maybe it helps... Tobias ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Le dimanche 11 février 2007 à 13:59 +0100, Tobias Eberle a écrit : Hello Fabrice, Did you try to run gconf-editor and see if the key /apps/ekiga/general/user_interface/start_hidden is active ? (there should be a way to display that pair key/value from CLI, but I don't remember it) If yes either deactivate it, either try to check if your notfication area is still active in your panel. It was disabled and it does not change anything if it is enabled or disabled. Is accessibility enabled ? -- _ Damien Sandras (o- //\Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
On Sun, 11 Feb 2007 15:10:27 +0100 Damien Sandras [EMAIL PROTECTED] wrote: It was disabled and it does not change anything if it is enabled or disabled. Is accessibility enabled ? Yes, also my next question. There are many mutexes waiting. J. -- One of the main causes of the fall of the Roman Empire was that, lacking zero, they had no way to indicate successful termination of their C programs --Robert Firth ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Ekiga does not start
Is accessibility enabled ? shouldn't. In the Gnome preferences I found: Keyboard accessibility features Assistive Technologies both are disabled. Clicking through the items in gconf-editor I notices the following: After I entered /apps/ekiga/general/user_interface/calls_history_window absolutely no values are displayed anymore, only the key names - for every key in gconf. Restarting gconf-editor leads to values appearing again (until I enter the directory above again). This seems a bit strange and does not happen with a newly created (Unix) user account. Tobias ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list