Re: [Ekiga-list] Please help setting up Ekiga to work via Thomson 585 router
Le 31/08/2011 10:33, *Neoklis Kyriazis* a écrit fort à propos : > Hi, > > I am trying to get Ekiga to work with a Thomson TG585 v7 wireless router, > which I share with my neighbor. I don't know the TG585 model but I assume it is not very different to my ST716v5 since they are built with Broadcom chipsets. In that one I had to modify the default settings as follows, using telnet: 1) connection unbind application=SIP port=5060 (source : http://www.voip-info.org/wiki/view/Routers+SIP+ALG) 2) connection bind application=CONE(UDP) port=3478 Then Stun works for Linphone and it is not needed to NAT any port. Ekiga seems to be a bit more exacting however but I am not able to say more. > With network detection enabled, ekiga always gives me an error message, > requesting manual prot forwarding setup which doesn't help. Otherwise it > says that registration with the SIP provider (both ekiga.net and > iptel.org) failed. Trying to use one of the services of ekiga.net (echo > test etc) gives me a Security check failed error. Ekiga echo test is very often down... ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] Please help setting up Ekiga to work via Thomson 585 router
Hi, I am trying to get Ekiga to work with a Thomson TG585 v7 wireless router, which I share with my neighbor. My computer is Intel Core 2 quad and O/S is arch Linux x86_64 with kernel 3.0.1. I have tried many suggestions I found by searching the Internet, including setting up port forwarding manually, setting up a static IP connection, disabling STUN and network detection, but to no avail. With network detection enabled, ekiga always gives me an error message, requesting manual prot forwarding setup which doesn't help. Otherwise it says that registration with the SIP provider (both ekiga.net and iptel.org) failed. Trying to use one of the services of ekiga.net (echo test etc) gives me a Security check failed error. I have uploaded the output of "ekiga -d 4" to my website: http://www.qsl.net/5b4az/pages/ekiga-debug.txt to avoid a large post here. My thanks in advance! -- Regards Neoklis - Ham Radio Call 5B4AZ QTH Locator KM64KR Website: http://www.qsl.net/5b4az/ ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list